Smart Continuous Conductivity Monitor MC310 by Milwaukee

£188.95
In Stock

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.

All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.

Professional EC - Conductivity Monitor
User selectable Hi/Low Set Point
Manual 1 point calibration
Visual LED alarm
Supplied with 12 VDC adapter, mounting kit, and 20ml 1413 µS/cm calibration solution
MA811/2 EC Conductivity Probe with 2m cable (BNC connector)

Range	0.0 - 10.0 mS
Resolution	0.1 mS/cm
Accuracy	±2% Full Scale
Setpoint range	1 - 5 mS
Alarm	Active when reading is higher or lower than set point
Probe	MA812/2 (included)
Range	0.0 - 10.0 mS
Resolution	0.1 mS/cm
Accuracy	±2% Full Scale
Setpoint range	1 - 5 mS
Alarm	Active when reading is higher or lower than set point
Probe	MA812/2 (included)