Induct Odour Control:

The PRO3 GENERATOR is a high output corona discharge ozone generator that eliminates odours from ventilation systems before they are exhausted outside.

The PRO3 GENERATOR is not fitted inside the duct; it is an external generator that injects high concentrations of ozone directly into the duct via an integral pump and delivery tube.

Ozone production and the lifespan of the corona discharge cells that produce ozone are negatively affected by moisture and airborne contaminates. Humid and dirty air inside the ducting is damaging to corona discharge cells, shortening their life span and their ability to produce ozone. This is a major problem with induct ozone generators because they are constantly exposed to these poor conditions. In fact, a unit with ozone production rated at 1800mg per hour when installed inside the ducting where humidity is typically over 60% will produce less than 1/3rd of its rated output of ozone.

Because the PRO3 GENERATOR can be positioned where air is dryer and cleaner, and the ozone injected where it's needed, ozone production is consistently higher making the PRO3 GENERATOR much more effective at removing odours than induct versions with the same rated output. The corona discharge cells will be more reliable and last much longer because they are not in contact with damp, dirty air.

The PRO3 GENERATOR is fully user serviceable. Exchangeable cells mean they can be maintained as new without having to be removed from the location giving you reliable odour control year after year with no down time. Induct versions are not user serviceable and will become less efficient over time before needing to be removed and replaced entirely.

The PRO3 GENERATOR is much easier to install than induct versions, they can be fitted to any diameter duct in a matter of minutes. They are compact and portable so can be removed and installed in other locations easily.

The PRO3 GENERATOR is designed and engineered in the UK by leading experts in the field of odour control. Don't get caught out with yesterday's technology. Choose a PRO3 GENERATOR for total piece of mind.

Air Sterilisation:

The PRO3 Generator produces very high concentrations of ozone and should not be used inside the room for the purposes of odour control unless injected inside the duct as described, although they can be used as a 'shock treatment' to sterilise air inside a growing area. If you intend to release ozone into the room for air sterilisation purposes it is important that you attach the PVC pipe to the 'Air In' connection and position the pipe outside of the room being treated OR locate the generator outside of the room and pipe the ozone in. Failure to do this will result in ozone being drawn into the generator which will damage the unit and void the warranty.
Water purification:
Ozone is particularly effective for water sterilisation prior to use in hydroponics. Simply attach an air-stone or air-diffuser to the PVC pipe and allow 1g of ozone per 100ltrs of water per hour before using the water in the system.

Specification:

Output* g/hr: 2 (Twin output 2 x 1g/hr)
Pump ltrs/min: 10
Power (w): 100
Weight (kg): 3.2
Fuse (timed): 1A
Supply: 220V 50/60 Hz
Size (mm): L=450 H = 200 W = 220mm
Temperature: -10C to +40C