For reducing the pH Value Used to adjust the pH-level during the bloom stage.
Fertilizer use: add small amounts of pH- Bloom until the desired level is reached Recommended pH level is 5.8
Corrosive, contains 30% phosphorus acid
Do not inhale fumes
Causes burns
Do not swallow
Keep out of the reach of children
In case of contact with eyes, immediately rinse eyes out with
plenty of water and seek medical attention
Wear protective clothing- gloves ar..
Essential Trident - pH, EC/CF and Temp Meter - Highly accurate, professional all-in-one meter for easy nutrient control
The all-in-one conductivity, pH and temperature meter is designed to make nutrient measurement quick and easy. It can be used as a stirrer and makes it easier to take readings in deep tanks.
Accurate and rapid conductivity, pH and temperature measurement - Nutrient strength in EC, CF or PPM - Easy push button calibration - Auto turn-off..
Measures EC, TDS and temperature. Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl). Automatic temperature control (ATC) using three temperature co-efficiencies.
High-end EC meter
Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl)
Automatic temperature control (ATC) using three temperature co-efficiencies
Digital calibration (push button) to any point within the meter’s range
Auto-off functi..
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration.Includes a 7.0 pH buffer powder packet and a dropper of KCI electrode storage solution.
High-end PH meter
Resolution: pH: 0.01 pH, 0.00 – 14.0 pH
Accurate to +/- 0.02 pH
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration
Low battery indicator
Replaceable probe
Clear cap to notice moisture(or lack of) on probe
Glass encased ..
Prolong the life of the pH-80, pH-200 and other brands of pH meter by adding a few drops of pH-STOR to the sponge in the meter cap.
Contains fungicide and sterilising agents...
Regulating the pH, to ensure your plants extract everything from the costly food?
Cellmax makes it easy for you.
pH- Growth, pH- Flowering and pH+ ensure an optimal pH, from beginning to end.
Contains 3% nitric acid...
The BOYU Liquid pumps are submersible and suitable for all hydroponc systems and nutrient solution pumping requirements. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated. Disassembly and cleaning is easy thanks to the clever design...
PPH-2 Inline pH Sensor is specially designed for Aqua-X Irrigation Control System. The pH electrode probe has a single cylinder that allows direct connection to the terminal of the AMP-2 Sensor Board. It is accurate and heavy duty that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the pH level of your water.
Features:
Suitable for wide range of applications: Hydroponics, Aquariums, L..
The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TRolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors.
The SPH..
Mills pH supplement works to stabilize and optimize the pH levels of your plants irrigation water throughout the growing cycle. Available in pH Flower and pH Growth, this additive can be used to adjust pH levels throughout all stages of cultivation – keeping pH levels firmly between 5.8 and 6.2. Ensuring you have the correct pH levels is essential to promoting rapid, vigorous growth and ensuring nutrients and soil are in perfect balance.
Hard water is n..
Suitable for wide range of applications: Hydroponics, Aquariums, Laboratory etc.
3.6-meter long cable for flexible placement.
BNC terminal allows direct connection to AMP-2 Sensor Board...
TrolMaster's new PPH-3 pH probe has been improved in multiple ways. The new PPH-3 features a reduced diameter protective sleeve and threaded body that will allow the probe to be installed into standard 3/4" PVC tee fittings.
The PPH-3 has an improved sensor element for more stable and reliable performance. Can be used with the AMP-2 or the AMP-3 nutrient sensor module.
Features:
Suitable for a wide range of applications: Hydroponics, Aquariums, Labo..
This easy-to-use pH meter helps growers calculate the optimum conditions for their plants. The simple digital display makes it simple to identify and correct when nutrient solutions are too high or low.
Monitors pH of soil and nutrient solution
Maintaining the right pH can make or break a garden. Soil or water that is too acidic can “lock out” essential nutrients and harm beneficial microlife. A pH that is too high equally interrupts nutrient intake and ..
Gold Label Ultra pH is a universal acid for adjusting the pH level of nutrient solution. Contains a balanced mix of phosphoric acid, nitric acid and sulphuric acid for use throughout the full grow cycle.
Contains:
15% Nitric Acid
10% Sulphuric Acid
11% Phosphoric Acid
3% Nitrogen
..
Essentials LAB 30% pH- is an acid solution (30% phosphoric acid) which can be used in small, controlled doses to lower the pH (increase acidity) of nutrient solutions. Mix thoroughly and measure with a calibrated pH meter to attain the desired pH reading. Ideal for adjusting large volumes of nutrient solution.
Concentrated acid solution
Can adjust the pH of large volumes of nutrient solution
Technical Specifications:
30% phosphoric acid..
pH, condition, and cleanse your source water with a single product. A
unique non-hypochlorous acid formulation effectively reduces pH while
keeping your system chlorine-free clean...
For reducing the pH Value Used to adjust the pH-level during the bloom stage.
Fertilizer use: add small amounts of pH- Bloom until the desired level is reached Recommended pH level is 5.8
Corrosive, contains 30% phosphorus acid
Do not inhale fumes
Causes burns
Do not swallow
Keep out of the reach of children
In case of contact with eyes, immediately rinse eyes out with
plenty of water and seek medical attention
Wear protective clothing- gloves ar..
Essential Trident - pH, EC/CF and Temp Meter - Highly accurate, professional all-in-one meter for easy nutrient control
The all-in-one conductivity, pH and temperature meter is designed to make nutrient measurement quick and easy. It can be used as a stirrer and makes it easier to take readings in deep tanks.
Accurate and rapid conductivity, pH and temperature measurement - Nutrient strength in EC, CF or PPM - Easy push button calibration - Auto turn-off..
Measures EC, TDS and temperature. Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl). Automatic temperature control (ATC) using three temperature co-efficiencies.
High-end EC meter
Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl)
Automatic temperature control (ATC) using three temperature co-efficiencies
Digital calibration (push button) to any point within the meter’s range
Auto-off functi..
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration.Includes a 7.0 pH buffer powder packet and a dropper of KCI electrode storage solution.
High-end PH meter
Resolution: pH: 0.01 pH, 0.00 – 14.0 pH
Accurate to +/- 0.02 pH
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration
Low battery indicator
Replaceable probe
Clear cap to notice moisture(or lack of) on probe
Glass encased ..
Prolong the life of the pH-80, pH-200 and other brands of pH meter by adding a few drops of pH-STOR to the sponge in the meter cap.
Contains fungicide and sterilising agents...
Regulating the pH, to ensure your plants extract everything from the costly food?
Cellmax makes it easy for you.
pH- Growth, pH- Flowering and pH+ ensure an optimal pH, from beginning to end.
Contains 3% nitric acid...
The BOYU Liquid pumps are submersible and suitable for all hydroponc systems and nutrient solution pumping requirements. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated. Disassembly and cleaning is easy thanks to the clever design...
PPH-2 Inline pH Sensor is specially designed for Aqua-X Irrigation Control System. The pH electrode probe has a single cylinder that allows direct connection to the terminal of the AMP-2 Sensor Board. It is accurate and heavy duty that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the pH level of your water.
Features:
Suitable for wide range of applications: Hydroponics, Aquariums, L..
The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TRolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors.
The SPH..
Mills pH supplement works to stabilize and optimize the pH levels of your plants irrigation water throughout the growing cycle. Available in pH Flower and pH Growth, this additive can be used to adjust pH levels throughout all stages of cultivation – keeping pH levels firmly between 5.8 and 6.2. Ensuring you have the correct pH levels is essential to promoting rapid, vigorous growth and ensuring nutrients and soil are in perfect balance.
Hard water is n..
Suitable for wide range of applications: Hydroponics, Aquariums, Laboratory etc.
3.6-meter long cable for flexible placement.
BNC terminal allows direct connection to AMP-2 Sensor Board...
TrolMaster's new PPH-3 pH probe has been improved in multiple ways. The new PPH-3 features a reduced diameter protective sleeve and threaded body that will allow the probe to be installed into standard 3/4" PVC tee fittings.
The PPH-3 has an improved sensor element for more stable and reliable performance. Can be used with the AMP-2 or the AMP-3 nutrient sensor module.
Features:
Suitable for a wide range of applications: Hydroponics, Aquariums, Labo..
This easy-to-use pH meter helps growers calculate the optimum conditions for their plants. The simple digital display makes it simple to identify and correct when nutrient solutions are too high or low.
Monitors pH of soil and nutrient solution
Maintaining the right pH can make or break a garden. Soil or water that is too acidic can “lock out” essential nutrients and harm beneficial microlife. A pH that is too high equally interrupts nutrient intake and ..
Gold Label Ultra pH is a universal acid for adjusting the pH level of nutrient solution. Contains a balanced mix of phosphoric acid, nitric acid and sulphuric acid for use throughout the full grow cycle.
Contains:
15% Nitric Acid
10% Sulphuric Acid
11% Phosphoric Acid
3% Nitrogen
..
Essentials LAB 30% pH- is an acid solution (30% phosphoric acid) which can be used in small, controlled doses to lower the pH (increase acidity) of nutrient solutions. Mix thoroughly and measure with a calibrated pH meter to attain the desired pH reading. Ideal for adjusting large volumes of nutrient solution.
Concentrated acid solution
Can adjust the pH of large volumes of nutrient solution
Technical Specifications:
30% phosphoric acid..
pH, condition, and cleanse your source water with a single product. A
unique non-hypochlorous acid formulation effectively reduces pH while
keeping your system chlorine-free clean...