Search - Tag

Light Adaptor Cord Set

Ideal for hanging lamps in your grow room. If you are using HID lamps and ballasts then purchase the IEC version. If using self ballasted CFL lamps then purchase the 3 pin version...

£22.95

Ex Tax:

3 Core 1mm Standard Flex 10amp

3mm 3 Core Heat Resistant Flex, White Current Capacity 10amp..

£1.95

Ex Tax:

Digital Thermostat for Heater Mats or Cables

Ultra accurate digital thermostat; ideal fo heat mats or heater cables up to 500w. Adjust temperature (where applicable) from 5C to 30C, accurate to within 1C...

£49.95

Ex Tax:

ALB (Adjustable Lamp Bracket) Cord Set IEC Socket

Fits all PowerPlant ALB reflectors and great for hanging lamps Ideal for hanging lamps in you’re your grow room. If you are using HID lamps and ballasts then purchase the IEC version. If using self ballasted CFL lamps then purchase the 3 pin version. This adaptor allows PowerPlant's world beating reflectors to be used with any IEC ballast...

£23.95

Ex Tax:

1.5m HID Extension Lead

The LUMii HID Reflector Extension Lead is available in 1.5m and 5m lengths. Suitable for use with all LUMii and IEC reflectors. Please make sure that when you are using extension leads for HID, your ballast is built to ignite the lamp over long distances. PowerPlant and LUMii ballasts are able to ignite a lamp from up to 15 metres from the ballast...

£5.95

Ex Tax:

5m HID Extension Lead

Suitable for use with all LUMii and IEC reflectors. Please make sure that when you are using extension leads for HID, your ballast is built to ignite the lamp over long distances. PowerPlant and LUMii ballasts are able to ignite a lamp from up to 15 metres from the ballast...

£8.95

Ex Tax:

Cord Set With 4m Cord

The LUMii Reflector Cord Set is 4m long to IEC and can be used on its own to hang lamps or used with LUMii shades. We recommend if using on its own the use of the hanging bracket, which is designed to take stress off the cable. The LUMii Cord Set is ideal for lamps up to 600w...

£13.95

Ex Tax:

Heavy Duty Cord Set (up to 1000W)

The LUMii Heavy Duty Cord Set is comprised of the E40 ceramic lamp holder with a 4m 1.5mm lead and male IEC connection. This is a heavy duty 15 amp, 3 core cord set suitable to power up to 1000w lamp...

£18.95

Ex Tax:

GAS Cable Pack 1 for GAS EC System

Cable Pack 1 for the GAS EC System. Y SPLITTER, 5M MALE/MALE..

£27.95

Ex Tax:

GAS Cable Pack 2 for GAS EC System

Cable Pack 2 for the GAS EC System. 5M MALE/MALE CABLE ..

£11.95

Ex Tax:

GAS Cable Pack 3 for GAS EC System

Cable Pack 3 for the GAS EC System. Y SPLITTER CONNECTOR ..

£16.95

Ex Tax:

GAS Cable Pack 7 for GAS EC System

Cable Pack 7 for the GAS EC System. 2M FEMALE/FEMALE EXTENSION CABLE ..

£11.95

Ex Tax:

GAS Cable Pack 4 for GAS EC System

Cable Pack 4 for the GAS EC System. 2M MALE/FEMALE BALANCER EXTENSION CABLE ..

£13.95

Ex Tax:

Secret Jardin Flange for Cables & Ducting

Bring Flexibility to Your Tent Arrangement Secret Jardin’s Ducting and Cable Flanges enable you to create vents anywhere on your grow tent and to simplify your setup. Reducing the number of bends in your ducting increases the efficiency of your fans and also greatly reduces noise. Thanks to their 100% hermetic design, you can easily connect your filters, ducts and extractors from 100mm to 150mm. Using the Light Baffle, your Ducting Flange will also act as ..

£3.95

Ex Tax:

Trolmaster (TSS-2) Aqua-X Touch Spot Extension Cable

Touch Spot Extension Cable (TSS-2) is specially designed for the WD-1 water detector in the Aqua-X Irrigation Control System. Features: Seamless Connection with Water Detector Plug & Play..

£28.95

Ex Tax:

GAS Cable Pack 8 for GAS EC System

Active cables for GAS active fan controllers. The white active cables have all three pins connected, it has a power cable from the fan. This means the controllers can be powered from the fan without being connected to the mains, meaning less plugs needed in your grow room. Compatible with all our controllers. You must use active cables with controllers that are designed for Active Cables, these have white connections. 5 metre male/male active connector ..

£12.95

Ex Tax:

GAS Cable Pack 9 for GAS EC System

Active cables for GAS active fan controllers. The white active cables have all three pins connected, it has a power cable from the fan. This means the controllers can be powered from the fan without being connected to the mains, meaning less plugs needed in your grow room. Compatible with all our controllers. You must use active cables with controllers that are designed for Active Cables, these have white connections. Y Active Splitter cable For u..

£18.95

Ex Tax:

GAS Cable Pack 11 for GAS EC System

Connect two male cables with the Female to Feamale cable. Active cable must be used with active male cables. ..

£9.95

Ex Tax:

GAS Cable Pack 13 for GAS EC System

Terminates the EC socket in a Systemair EC fan so that the fan runs at 100% power all the time. ..

£7.95

Ex Tax:

Trolmaster (ECS-2) Hydro-X RJ12 to 3.5 Jack Extension Cable Set

RJ12 to 3.5mm Converter Cable Set is specially designed for Hydro-X Environment Control System. Features: 16ft RJ12 Cable 4ft RJ12 to 3.5mm Jack Cable T-Shape Splitter Package Contents: 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to 3.5 Jack Cable 1 x T-shaped Splitter 1 x 3.5mm Female Barrel Connector..

£25.95

Ex Tax:

Gavita ECM Controller cable - 3m (GAV-ECMC)

The ECM Controller cable is used to connect the ECM1 module to the Gavita Master Controller...

£10.95

Ex Tax:

Gavita 3 way RJ14 Cable Splitter (GAV-SPLIT)

The Gavita 3 way RJ14 cable splitter is needed to connect the Master controller to the E-series ballasts when running the ballasts inline. Use with the Interconnect cables...

£7.95

Ex Tax:

GHC 5m Sensor Extension Cable

5m cable for extending length of the GHC digital sensor...

£10.95

Ex Tax:

GHC VPD - Multifan Connector Cable

Cable for connecting Multifan to VPD...

£5.95

Ex Tax:

Trolmaster (ECS-3) RJ12 to Threaded Waterproof Connector converter cable

The ECS-3 provides a 5/8” diameter connector for some of Fluence brands LED fixtures using Threaded Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / Threaded Waterproof Connector cable. Contains: 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to 3pin IP67 converter cable 1 x T-shaped Splitter..

£25.95

Ex Tax:

Trolmaster (SPH-1) RJ12 Splitter Hub With Cable Set

The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TRolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors. The SPH..

£50.95

Ex Tax:

HI-76410/4 Galvanic DO probe for HI-8410 process, 4 m cable

Galvanic DO Probe with Internal Temperature Sensor, DIN Connector, and 4m Cable for use with HI-8410 This galvanic dissolved oxygen probe is designed to work with the HI-8410 to monitor the concentration of DO in a wide range of industrial process applications. Galvanic technology Built-in temperature sensor for Automatic Temperature Compensation Built for everyday, demanding use in industrial applications Key features Galvanic DO probe - Provided with..

£713.95

Ex Tax:

Telos System Link Cable 2m

Pair with the Telos h-connector as an extension cable between linked Telos lights, or use as a power cable extension. This 2 meter AC Cable is made and tested by Wieland to our specifications, it is waterproof to IP66 and is compatible with any Telos AC connection (green connectors) Rated current: 16 A Rated voltage: 250 V Rated voltage2: 400 V Rated impulse voltage: 4 kV Ingress protection: IP66..

£15.95

Ex Tax:

Lumatek LED 5m Extension Cable

Designed to connect the driver and the LED fixture, in case the driver is used remote and away of the fixture...

£59.95

Ex Tax:

Lumatek LED T-Junction + Control Link Cable

This T-junction and control link cable component is used to link Lumatek Zeus LED fixtures together in series to be externally controlled with the Lumatek Control Panel Plus. The T-junction comprises three LLT M12 connectors, two male and one female. The male connector on the main stem connects to the dimming wire from the LED driver/fixture with the control link cable from the Control Panel Plus connecting to the male connector on the T arm. The control l..

£20.95

Ex Tax:

GAS Cable Pack 16 for HyperFan V2 EC Compatability

This cable pack enables compatibility between GAS EC fan controllers and the HyperFan V2. ..

£5.95

Ex Tax:

Gavita Controller Cables

The controller cable takes the signal from the master controller to the first light fixture or splitter...

£9.95

Ex Tax:

Gavita Interconnect Cables

Interconnect cables are used to join light fixtures using a splitter. Join two splitters and joins splitter to light fixtures...

£6.95

Ex Tax:

Gavita LED Cable Splitter (GAV-LED-SPLIT)

Used to connect multiple LED light fixture to a single controller...

£12.95

Ex Tax:

GAS Cable Pack 10 (for Gavita ELF to SystemAir EC Fans)

Cable pack 10 connects SystemAir EC Fans to Gavita ELF controllers, or EC fans to a Gavita Fan Balancer. ..

£18.95

Ex Tax:

GAS Cable Pack 12 (Gavita to SystemAir EC Fan)

Converts a Gavita connection to a SystemAir EC fan connection. Can be used on ELF Controllers or the Gavtia Balancer. ..

£11.95

Ex Tax:

Gavita Repeater Bus Interconnect 3m Cable (GAV-ICRB3)

Connects repeater bus light fixtures, direct connection between fixtures. (Slimline or CMH fixtures). Please note: colour may vary...

£28.95

Ex Tax:

Gavita LED Controller Cables

Cable to connect the E-series LED adapter to the Gavita EL Controller...

£13.95

Ex Tax:

Gavita LED Interconnect 3m Cable (GAV-RJIC3)

Cable to connect E-series LED adapters together...

£7.95

Ex Tax:

OptiClimate Cable for Remote Control

OptiClimate cable for remote control. This OptiClimate cable for the remote control of the OptiClimate water-cooled air conditioners...

£31.95

Ex Tax:

Lumatek Daisy Chain 5M Control Cable

This 5m long Control Link Cable is designed to daisy-chain your LUMATEK Controllable LED Fixtures allowing a stable and precise connection without any interference. Simply connect the M12 Self-locking male plug into the Signal Out LED structure output and the M12 Self-locking female plug into the Signal In LED structure input of the next fixture. Technical/Test data: Withstand voltage between conductor and insulator is 800 VAC, 2mA, test time 60S, no b..

£10.95

Ex Tax:

Maxibright Daylight iLink Data Cable 2m

For use with 660W, 660W Pro and 480W Pro LED Lighting Systems (Excluding DAYLIGHT 660W LED (2019)). Link up to 100 LED units with ease, and control via the DAYLIGHT Lighting Controller.Length: 2m..

£13.95

Ex Tax:

Apogee PQ-622 Package: microCache and ePFD Sensor with 2m Cable

This promotional package includes a SQ-620-SS2 Extended Photon Flux Density (ePFD) sensor (with a 2 meter cable), a microCache Bluetooth micro-logger, an AA-090 protective Neoprene Case, an extra 2545 microCache battery, and an AM-020 Apogee PVC Sensor Platform. The extended 2 meter cable of the SS2 model allows the microCache to be positioned further from the sensor, such as out of the water when used with coral reef tanks or for other applications. When ..

£863.95

Ex Tax:

Trolmaster (ECS-1) RJ12 Extension Cable Set - Hydro-X

TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable. Contains 1 x Male-to-Male 16ft RJ12 Cable 1 x Male-to-Male 4ft RJ12 Cable 1 x RJ12 T-Splitter..

£35.95

Ex Tax:

Trolmaster (ECS-5) RJ12 to PushLock Converter Cable - Hydro-X

The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable. Contains 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to PushLock Waterproof Connector converter cable 1 x T-shaped Splitter Please note: Lead time 1-2 weeks...

£52.95

Ex Tax:

Trolmaster (ECS-4) 16ft Extension Cable for AMP-2 Sensor Board - Aqua-X

The ECS-4 extension cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between AMP-2 sensor board and the main controller. Features: Seamless Connection Plug & Play..

£26.95

Ex Tax:

LED Driver Remote Use 5m Extension Cables (x2)

These two 5m long Extension Cables are designed to connect the Lumatek driver and LED fixture, in case the driver is used remote and away of the fixture. Allowing a stable and precise connection without any interference these product is composed by 2 elements: 5m Extension Power Cable for LED driver 5m Extension Dimming Cable..

£34.95

Ex Tax:

LED Driver Remote Use 5m Extension Cables (x3) for Zeus 1000W Xtreme

These three 5m long Extension Cables are designed to connect the Lumatek driver and LED fixture, in case the driver is used remotely and away of the fixture. Allowing a stable and precise connection without any interference these product is composed by 3 elements: 2x 5m Extension Power Cable for LED driver 5m Extension Dimming Cable..

£47.95

Ex Tax:

Lumatek Control Link Cable 5m

This cable is designed to transmit the signal between your Lumatek controllable ballasts and digital controller. Made with high quality long-lasting components, braided ground shield and OFC conductors, this link cable allows a stable and precise connection without any interference...

£10.95

Ex Tax:

Loadstar Euro Reflector with 5m Cable

The Loadstar Euro Reflector is our most popular reflector thanks to its affordability. The Euro Reflector has a simplistic design - open ended with wide spread and made from incredibly reflective anodised aluminium, with the wiring at the back of the reflector housed in a sturdy junction box. These features result in fantastic plant growth making it a very popular choice...

£16.95

Ex Tax:

Cable Ties 140mm x 3.6mm - pack of 100

Keep your power cables tidy with this pack of 100 strong cable ties...

£5.95

Ex Tax:

Cable Ties 300mm x 4.8mm - pack of 100

Keep your power cables tidy with this pack of 100 strong cable ties...

£9.95

Ex Tax:

Telos Remote Driver Cable 3m

This 3 meter remote driver cable connects between your Telos light and the driver making your grow light thinner and lighter for hanging. The cable is also waterproof and dustproof to IP66 allowing you to place the driver outside, perfect for those looking to reduce the temperature of their growing environment. Made by German electrical connector pioneers, Wieland Electric and manufactured to our specifications, these connectors are safe and have a twist l..

£21.95

Ex Tax:

Q-Max / Max Fan Pro EC Link Cable

Used to link two EC fans together from 1 controller...

£9.95

Ex Tax:

Trolmaster (ECS-6) 16ft Extension Cable for WCS-1 & WCS-2

The ECS-6 extension cable is simply a 16 ft extension cable to use with the WCS-1 & WCS-2 moisture content sensor. It has a male and female end and can extend the distance between WCS-1 module and the sensor probe...

£35.95

Ex Tax:

Trolmaster (ECS-8) 32ft Extension Cable for IR Emitter

The ECS-8 extension cable is simply a 32 ft extension cable to use with the IR emitter in AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1. It has a male and female end and can extend the distance between IR emitter and AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1...

£36.95

Ex Tax:

Trolmaster (ECS-9) 12ft RJ12 to 4-pin IP65 Connector Cable

The ECS-9 RJ12 to 4pin connector cable is simply a 12 ft cable to use with Lighting Control Adaptor T (LMA-T) and ThinkGrow LEDs with Threaded Waterproof Connectors for interconnecting...

£36.95

Ex Tax:

SANlight FLEX 2 Pin Waterproof Connection Cable

SANlight FLEX 2 Pin Waterproof Connection Cable..

£4.95

Ex Tax:

Elite Temperature Sensor with 10m Cable

The Temperature Sensor is designed for use with a controller, feeding information about the grow area’s environment back to the Controller’s on-board computer. Measures temperature levels in the grow area. Highly accurate, professional grade equipment. Designed for use with a controller. Ten metre long cable. How It Works The temperature sensor gathers information on the temperature of your grow area and feeds it back to the Controller. T..

£8.95

Ex Tax:

Cable Ties 10x 2.4mm x 100mm 10x 4.8mm x 200mm

Grow Tools Cable Ties have hundreds of functional uses, and Grow Tools provides two lengths in one pack for the user's convenience. Between both sizes, each should cover every task necessary. Both sizes consist of a tough and resilient material which is what makes them so long-lasting and reliable. The shorter Cable Ties (100mm) are perfect for the smaller tasks in a grow room. These can include bunching cables together, securing leads to tent poles and s..

£2.95

Ex Tax:

Lumatek RJ Ethernet Cable

Designed to connect our LED’s to any Universal Controller with RJ port interface, through a signal converter 0-10V to RJ control adaptor...

£15.95

Ex Tax:

Hanna HI-769828/20 Replacement DO/EC/°C Probe for HI-9828 with 20m Cable

The HI-769828/20 is a spare dissolved oxygen, conductivity and temperature probe for the HI-9828 with a 20m cable. Sensor replacement is quick and easy with field replaceable, screw type connectors that are colour-coded for easy sensor identification. The probe features a multi-strand-multi-conductor shielded cable with 4m, 10m, and 20m lengths available. Its rugged, waterproof design makes it ideal for field use. IP68 - Dust-tight and protected against ..

£2,644.95

Ex Tax:

Hanna HI-769828/4 Spare DO/EC/T Probe for HI-9828 with 4m Cable

The HI-769828/4 is a spare dissolved oxygen, conductivity and temperature probe for the HI-9828 with a 4m cable. The probe features a multi-strand, multi-conductor shielded cable with 4m, 10m, and 20m lengths available. Its rugged, waterproof design makes it ideal for field use. IP68 - Dust-tight and protected against the effects of continuous immersion in water beyond 1m...

£2,241.95

Ex Tax:

GAS Hyperfan V2 Extension Cable (Cable Pack 15)

5m extension cable for the Phresh Hyperfan V2...

£16.95

Ex Tax:

Growlink Teros 12 Adapter Extension Cable 25 Feet

25ft extention cable for the Teros 12 adapter...

£34.95

Ex Tax:

Pre assembled Peristaltic Cable

Pre assembled 4 Conductors cable with female connection for TankBot and quick connectors for Peristaltic Pumps. Supports two different peristaltic pumps. This cable is compatible with TankBot, and presents also quick connectors compatible with peristaltic pumps. Specifications: Max. Voltage: 300V Wire Gauge: 22 AWG Material: Copper, Bare Insulation: PVC Strand: 7/30 Material: Copper, Bare Diameter: 3.18mm Thickness: 0.381mm Operating..

£18.95

Ex Tax:

GroLab Pre assembled Solenoid Cable

Pre assembled 4 Conductors cable with female connection for TankBot and quick connectors for Solenoid Valves. Supports two different solenoid valves. Solenoid valves pre assembled cable This cable is compatible with TankBot, and presents also quick connectors compatible with solenoid valves. Specifications: Max. Voltage: 300V Wire Gauge: 22 AWG Material: Copper, Bare Insulation: PVC Strand: 7/30 Material: Copper, Bare Diameter: 3.18mm ..

£18.95

Ex Tax:

GAS Male to Male Cable

Non-Active Male/Male cable that connects an active controller to an EC fan. Has a spanning lenght of 5m...

£12.95

Ex Tax:

Gavita Power Cord – 5m

Power Cord for Gavita light fixtures...

£18.95

Ex Tax:

Growlink Teros12 Sensor Adapter Cable 32ft

M8 axial female to pigtail, 4-pole, PVC jacket, black, 32.8ft/10m cable length, IP67...

£55.95

Ex Tax:

Growlink M12 Cables for ESM2 Climate Sensor

M12 Cables for ESM2 Climate Sensor...

£55.95

Ex Tax:

Bluelab Pro Controller to PeriPod Data Cable

Bluelab Pro Controller to PeriPod data cable...

£29.95

Ex Tax:

Lumatek Cable for 2PIN Controller - LUMM0017

This 5 m long control link cable is designed to connect your luminaires in series LED and the controller LED plus controller. Simply connect the jack plug to the controller output and the 2PIN plug to the structure input of the next fixture. Features: Length: 5m Temperature resistance: 80 ℃ Operating temperature: -20 ℃ -105 ℃ Storage temperature: -25 ℃ -105 ℃ IP65 RoHS compliant..

£19.95

Ex Tax:

Sealz Adapter Cable

Sealz is a revolutionary new vacuum sealer that features a battery-less design; with this Sealz Vacuum Sealer Essentials kit you'll get the Sealz phone adapter vacuum pump powered by USB-C and Lightning cable. Sealz Vacuum Sealer Essentials includes 3 different bags with the largest capable of holding up to 112g, the medium up to 35g and the smallest up to 14g. Sealz Vaccum Sealer bags feature 7 layers of PE plastic to maximise odour control, they're als..

£11.95

Ex Tax:

DLI Controller Cables

Daisy chain your DLI lighting fixtures and connect them to your DLI controller using DLI Controller cables. Available in three different lengths: 4.8m, 7.6m and 15m...

£14.95

Ex Tax:

Adjusta-Watt RETRO Splitter Cable

Using the Adjusta-Watt® Splitter Cable, it’s possible to power two Adjusta-Watt® Retro LEDs and cover twice the area using just one ballast. The splitter cable divides the power evenly between the two fixtures, 360w per fixture, but also reduces the current, thus increasing the efficiency to 2.8μmol per fixture. Positioning the fixtures at 15cm above the canopy will deliver an average PPFD of 710μmol/s/m². This is higher per m2 than 600w HPS po..

£34.95

Ex Tax:

Sol-Digital LED Clone Bar Power Cable 1.3m

Power cable for the Sol-Digital LED Clone Bar...

£15.95

Ex Tax:

Maxibright Juno Pro Power Cable

Power cable for the Maxibright Juno Pro LED grow light...

£12.95

Ex Tax:

Maxibright Daylight iLink Data Cable 5m

For use with 660W, 660W Pro and 480W Pro LED Lighting Systems (Excluding DAYLIGHT 660W LED (2019)). Link up to 100 LED units with ease, and control via the DAYLIGHT Lighting Controller.Length: 5m..

£15.95

Ex Tax: