Plastic case tube fans with built in thermostat and temperature controller. The fan has an idle speed to always maintain negative air pressure. It will then automatically adjust its speed through three higher speed settings to maintain the desired temperature.
The control system is integrated into the unit and completely wired. Speed control is done by winding taps, so there is no extra noise caused by a controller.
Features:
Backward curved c..
An OptiClimate canopy temperature camera can be connected to the system to monitor evaporation from the crop: an excessive canopy temperature is indicative of problems with the plants' evaporation capacity (for example, due too little water or excessive light).
If the canopy temperature rises to an excessive level then the DimLux ballasts are dimmed or switched off until the temperature falls to an acceptable level: failure to lower an excessive canopy te..
With 8 Outputs the Harvest Master Climate Controller is capable of many things.
The Climate Controller from Harvest Master takes the guesswork out of growing your plants and turning them into a crop. With the Harvest Master Climate you simply plug the machine in and it automatically checks what you have connected and how it works.
You hardly need to open the manual. the system is capable of learning pretty much everything, and keep on lea..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The minimum speed controller is a temperature depended speed controller for ventilated rooms with one or more fans. The minimum speed controller keeps the temperature constantly and impedes to run under the set minimum-speed. It can be easily controlled, adjusting the required temperature and the minimum speed on two knobs.
The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistan..
This digital temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one or more exhaust fans (up to 600 watt).
The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, ma..
This digital fan controller is a humidity and temperature dependent speed controller for rooms with intake and exhaust fans (2 x 600watt). The fan controller keeps the room humidity and temperature constant and under pressure to prevent odour from escaping.
A reliable fan controller complete with:
Sealed water resistant cover
Plugs with flap-lids and a low voltage sensor making it perfect for humid rooms.
Protection class IP44
Digital sensor supplie..
Temperature is one of the most important environmental factors in your grow room / glasshouse all plants have an optimum temperature at which they will grow at and a minimum and maximum temperature that they can survive therefore temperature is very important to the health & growth rate of all plants.
The Evolution digital temperature control System constantly monitors the temperature in the growing area and independently controls fans, heaters and hu..
Essential Trident - pH, EC/CF and Temp Meter - Highly accurate, professional all-in-one meter for easy nutrient control
The all-in-one conductivity, pH and temperature meter is designed to make nutrient measurement quick and easy. It can be used as a stirrer and makes it easier to take readings in deep tanks.
Accurate and rapid conductivity, pH and temperature measurement - Nutrient strength in EC, CF or PPM - Easy push button calibration - Auto turn-off..
The new HortiStick is a three-in-one instrument that combines the measurement of pH, conductivity (mS) and temperature. The unit simultaneously displays nutrient concentration along with either pH or temperature. This simple, easy to use meter is ideal for the testing of hydroponic solutions and water treatment processes.
The instrument features two clear LCD displays and indicates pH and temperature over the range of 0 to 14 pH and 0 to 49.9 °C. The Hor..
Advanced microprocessor for fast efficient readings. Hold Function: saves measurements for convenient reading and recording. Built-in digital thermometer.
Fantastic value! Advanced microprocessor for fast efficient readings
Hold Function: saves measurements for convenient reading and recording
Auto-off function: the meter shuts off after 10 minutes of non-use to conserve batteries
Built-in digital thermometer
Comes with carry case
3 ..
Advanced microprocessor for fast efficient readings. Hold Function: saves measurements for convenient reading and recording. Built-in digital thermometer.
Fantastic value! Advanced microprocessor for fast efficient readings
Hold Function: saves measurements for convenient reading and recording
Auto-off function: the meter shuts off after 10 minutes of non-use to conserve batteries
Built-in digital thermometer
Comes with carry case
3 ..
Measures EC, TDS and temperature. Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl). Automatic temperature control (ATC) using three temperature co-efficiencies.
High-end EC meter
Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl)
Automatic temperature control (ATC) using three temperature co-efficiencies
Digital calibration (push button) to any point within the meter’s range
Auto-off functi..
Measures EC, TDS and temperature. Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl). Automatic temperature control (ATC) using three temperature co-efficiencies.
High-end EC meter
Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl)
Automatic temperature control (ATC) using three temperature co-efficiencies
Digital calibration (push button) to any point within the meter’s range
Auto-off functi..
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration.Includes a 7.0 pH buffer powder packet and a dropper of KCI electrode storage solution.
High-end PH meter
Resolution: pH: 0.01 pH, 0.00 – 14.0 pH
Accurate to +/- 0.02 pH
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration
Low battery indicator
Replaceable probe
Clear cap to notice moisture(or lack of) on probe
Glass encased ..
The 8100 pH and temperature meter features an easy to read, LCD display and is supplied as a kit which includes a 8100 pH meter, general purpose combination glass electrode, temperature probe, 4.01 and 7.00 pH buffer solutions and carrying case.
The 8100 pH meter indicates pH over the range of 0 to 14 pH with a resolution of 0.01 pH and temperature over the range of 0 to 99.9 °C with a resolution of 0.1 °C. The pH readings are automatically temperature co..
The THERM -B1 temperature controller is designed to activate a cooling or heating device. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control temperature between 7 to 35’C.
Activate a cooling heating device up to 15 amps
Separate Day and Night temperature settings
A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable me..
Temperature is one of the most important environmental factors in your grow room / glasshouse all plants have an optimum temperature at which they will grow at and a minimum and maximum temperature that they can survive therefore temperature is very important to the health & growth rate of all plants.
The Evolution digital temperature control System constantly monitors the temperature in the growing area and independently controls fans, heaters and hu..
Temperature and Humidity alarm sensors for surveliance of the min. / max Temperature and Humidity.
The settings will be done over the GSM telephone. The sensor respond via SMS if the temperature or the Humidity is over/under the setting.
The sensor comes with 6m cable.
Sizes and technical data's:
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Humidity accuracy ±4.5%rh
..
New Version now available - Click Here
The Bluelab Guardian Monitor Connect is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you.
It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark fo..
The SMSCOM Temp Protector provides a failsafe system that protects the room against excessive temperatures. Should the room overheat, the Temp Protector will automatically switch off a number of lights to allow the temperature to drop back to safe levels.
After plugging your lighting contactor/relay into the Temp Protector, simply set the maximum temperature cut off point for your room. Should the temperature in your room ever exceed your set point, the u..
The ultimate handy solution for measuring soil pH and temperature!
The Bluelab Soil pH Pen provides a pH and temperature reading of soils and media, so you know that the right nutrients will be made available to your plants.
In soils or growing media, pH strongly influences the availability of the microorganisms to plants in the soil. Now you can closely monitor and adjust the pH levels to optimize plant health and performance.
It will also ..
The Mini RayTemp® infrared thermometer is a compact, lightweight and low cost infrared thermometer. Simply aim and pull the trigger to display the temperature of the item being measured.
The Mini RayTemp® measures temperature over the range of -50 to 330°C with an assured accuracy of ±2°C over the range of 0 to 330°C, outside of this range (-50 to 0°C) accuracy is ±4°C.
This infrared thermometer has a clear, easy to read, LCD display with low battery, an..
The new RayTemp 6 infrared thermometer is a compact, durable and easy to use instrument, simply aim and pull the trigger to display the temperature of the item being measured.
Each thermometer incorporates an eight dot circle laser indicator, which allows you to precisely target the diameter of the area to be measured. As you move closer or further from the target the laser circle changes diameter. The unit incorporates an 12:1 optic ratio (target distanc..
OptiClimate CO2 Monitor with humidity (RH) and temperature sensor. The OptiClimate CO2 Monitor clearly indicates the CO2 level in the room. This device is also equipped with a humidity sensor and a temperature sensor. Furthermore, these values are clearly readible in the digital display of the CO2 monitor. This CO2 monitor can only be used as a reference, and has no adjustment options...
Dimlux Temperature and Humidity Module
With the Dimlux Aux Box you can now manage your Temperature and humidity parameters.
The Auxbox is connected to the Dimlux Maxi Controller through the Auxiliary port on the unit with this module you can connect a heater/heating system, humidifier or dehumidifier to control the Relative humidity, Temp and RH Set points for both day and night operation within your micro climate...
The All New nGrow Lighting and Temperature Controller
from Secret Jardin
The new Secret Jardin nGrow is easy to set up and has many great features. It's unique design and functionality ensures almost limitless flexibility of use. Simply set the time when you want the lights on, the duration, and desired room temperature, then sit back while the nGrow does the work for you. A night time temperature and temperature override function can also be set if requi..
The dimmable electronic ballast ADVANT 2V2 temperature control MOD has the IP65 rating which gives it a resistance to penetration of liquids and solids. It is noted for its high quality, stability and maintenance of bulb starts. The safest and most reliable ballast on the market comes equipped with a probe that controls power to the ballast intelligently depending on the temperature of the growing environment, this makes temperature..
This all-in-one sensor measures CO2, temperature, humidity and detects light simultaneously. Also, the sensor is equipped with a built-in calibration function to calibrate the CO2 sensor against outdoor air. The calibration menu is only accesible through a CO2 controller. Also equipped with a built-in switch to prevent unwanted calibration...
The EMS-Pro is the culmination of a lengthy research and development program at Ecotechnics, our design goal was to create a simple usb sensor to measure temperature, humidity & CO2 levels and to record them for later analysis.
Key features:
Plug and play USB sensor
Windows compatible
Realtime graphics display
Records all levels for graphing
1 year warranty..
D1-TMP/Digital Temperature Controller
The D1-TMP Digital Day/Night temperature controller is a very accurate device that allows the user to control EITHER a cooling or heating device.
A two meter long water-proof remote temperature sensor can be placed where it can sense the water or air temperature that the D1-TMP will be controlling.
The user first selects whether they are controlling a cooling or a heating device.
Feature with Day and Night temper..
HM-500: Continuous pH/EC/TDS/Temp Monitor
hydromasterThe HM Digital HydroMaster (HM-500) monitors pH, Temp˚C/˚F, EC & TDS providing accurate, stable readings the user can rely on. The unit can be wall mounted, is portable thanks to its rechargeable battery, and can be used as a benchtop monitor with its stand.
Continuous pH/EC/TDS/Temp Monitor
Rechargeable battery
RF Resistant
Portable/Wall Mount/Benchtop
Data Storage: Up to 20 measurement read..
The HI-9814 is a lightweight, waterproof portable pH, conductivity, TDS and temperature meter supplied with a specialist multiparameter probe designed for hydroponics, greenhouse and agricultural applications.
Key features
Compact, robust casing
Simultaneous readout of pH, EC or TDS and °C
Simple two button keyboard
Waterproof design to withstand the humidity of a growing environment
Specialist multi-parameter electrode
Optional green protective r..
The HI-98131 is a slim, lightweight, and waterproof pocket tester that measures pH, conductivity, TDS and temperature. This versatile pocket meter is designed for hydroponics, greenhouse and agriculture applications.
The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI-98131 has advanced features including a selectable EC to TDS conversion fac..
The HI-98118 pH/temperature tester is our latest pocket meter for measuring the pH of a hydroponic nutrient solution. The ergonomic design allows this tester to fit comfortably in your hand. The large easy to read LCD display shows both pH and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one or two point calibration.
T..
The HI-98318 is our latest pocket meter for measuring the EC/TDS of a hydroponic nutrient solution. The ergonomic design allows this tester to fit comfortably in your hand. The large easy to read LCD display shows both EC or TDS and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one point calibration.
The GroLine Waterpr..
Take the guesswork out of your room with these easy-to-use, reliable and efficient digital fan controller.
The Prima Klima Temperature Controllers couldn’t be easier to use. Simply set your desired room temperature and let it do the work of controlling your fans to achieve a constant, optimum temperature for your room, ensuring that all-important negative room pressure and giving total environmental control.
ISO 9003 product (Triple checked and control..
Take the guesswork out of your room with these easy-to-use, reliable and efficient digital fan controller.
The Prima Klima Temperature Controllers couldn’t be easier to use. Simply set your desired room temperature and let it do the work of controlling your fans to achieve a constant, optimum temperature for your room, ensuring that all-important negative room pressure and giving total environmental control.
ISO 9003 product (Triple checked and control..
The OCL X-series, with extremely powerful and higher PAR output than traditional fixtures, ask for a smart controller. That is why OCL designed the world’s smartest and yet easy to operate lighting controller.
All sensors (TEMP/RH/CO2) can be calibrated, it detects sensor failures and when a connection is not set-up properly a warning will automatically be displayed.
The OCL DLC-1.1 Smart Lighting and CO2-Controller (sold seperately) includes a built-in ..
Grow Room Monitoring 24/7 non-stop
Wirelessly sync with mobile and powered by a small button cell battery (CR2354), the net weight of AirComfort is well below 40g. Despite the light weight of the device, each AirComfort can store up to 100 days / 4032 sets of data – therefore even when the mobile is out of range, the data will be able to retrieve once it connects to your mobile again.
One APP can connect up to 32 AirComfort
If you need to monitor more t..
BETA-4 is a simple and practical temperature controller. It utilizes a highly visible and intuitive LED screen to let you know current temperature level or the max/min temperature recorded values.
Includes:
1 x Temperature Controller
1 x Temperature Sensor
Specifications:
Input Voltage: 120 Volts AC
Output Switch: Triac
Fuse Rating: 6A/250V~
AC Power Cord Length: 1.8m
Temperature Control Range: 40-100°F
Temperature Deadband: 5°F
Package Dim..
PCT-1 Reservoir EC/Temp Sensor is specially designed for Aqua-X Irrigation Control System. The EC/Temp electrode probe has a single cylinder that allows direct connection to the terminal of the AMP-2 Sensor Board. It is accurate and reliable that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the EC level and water temperature.
Features:
Suitable for wide range of applications: Hydrop..
PCT-2 Inline EC/Temp Sensor is specially designed for Aqua-X Irrigation Control System. The EC/Temp electrode probe has a single cylinder that allows direct connection to the input terminal of the AMP-2 Sensor Board. It is accurate and heavy duty that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the EC level and water temperature.
Features:
Suitable for wide range of applications: H..
The SmartBee™ LTH+CO2 Sensor is designed to allow better access to plant canopy, where placement accuracy is essential to monitor correct levels of CO2 levels. The lithium ion battery powered sensor is also Solar charged and can ensure a constant level of CO2 while maximizing efficiency and economy. Should you employ CO2 injection for maximizing growth, The SmartBee™ system works by sampling the air and sending sample data to the Hive Gateway. The Hive the..
SmartBee™ System's LTH sensors are core components that allow you fine-tuned control. They continuously monitor light, temperature and humidity wirelessly within the garden. One of the many smart features of the SmartBee™ LTH Sensor is a pair of solar panels on top of the unit that harvest excess energy from the lights, keeping the Li-po battery charged. You can deploy multiple LTH sensors to monitor specific areas of your garden, utilizing the readings fr..
Specially designed for the control of 240V temperature devices in the Hydro-X Control System. 240V temperature control relay, single pack with cable set. Same as the DST-1 except 240v instead of 120v.
Features:
LED Power Indicator
3-Prong Attaching Plug
RJ12 Cable Socket
Addressing
Plug & Play
Contents:
1 x Device Station
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter
Specifications:
Input Voltage: 240 VAC, 50/60Hz
Out..
SMART-VPD Temp / Humidity Controller
The Smart VPD controls Humidifiers/De-humidifiers & Heaters in the growroom. It optimises ‘Vapour Pressure Deficit’ in order to ensure plants are transpiring at the optimum rate during all stages of growth. Built on AEI technology, the controller will adapt and learn to work with the users individual set-up, taking into account other grow room equipment and their overall effect on the environment. Connects to the M..
Linx 600W Dimmable Ballast
Multi linkable digital ballast
High PAR levels
0.10v digital wattage adjustment
Parlux Master Controller ready
Soft start technology
Compatible with 600W High Pressure Sodium (HPS) or Metal Halide (MH) lamps
Silent, compact and lightweight
Includes cable to connect to the next ballast in the chain
By using the Parlux Master Controller (sold separately) you can mix two different light outputs within the same growing ar..
315W Dimmable Controllable Ballast
Multi-linkable CDM ballast
Highly efficient: 1.9 micromole per watt of electricity
High PAR levels
Compatible with reflectors when using an E40 to 315W adapter
0.10v temperature control adjustment
Parlux Master Controller ready
Soft start technology
Dynamic frequency control
Silent, compact and lightweight
By using the Parlux Master Controller (sold separately) you can mix two different light outputs within t..
The updated Combo Pen P100 Pro features a modern and robust housing. The improved software now ensures quicker readings of accurate measurements. You can easily replace the electrode should it be worn or damaged.
The Combo Pen P100 Pro is ideal for measuring the EC, pH and temperature of liquid plant nutrition and water in swimming pools, Jacuzzis and ponds. The user-friendly buttons can be used to effortlessly switch between the parameters. The meter is ..
Dependable temperature probe technology that's built to last.
For use with Bluelab pH Controller and Bluelab Pro Controller
Measure temperature of solutions to ±0.1°C/°F in reservoirs
Fully waterproof and can be submerged in reservoirs
Robust stainless-steel construction
Effective in nutrient solution
Fast sensor response for quick and accurate measurements
Easy to clean and maintain
Low maintenance – no calibration needed
2-metre/6.5..
The RayTemp 3 Infrared Thermometer is compact, lightweight and easy to use. Simply aim and pull the trigger to display the temperature of the item being measured. In addition the LCD will display the maximum temperature.
The RayTemp®3 infrared thermometer measures temperature over the range of -60 to 500°C with an assured accuracy of ±1°C over the critical food range of 0 to 65°C, outside of this range ±2% of reading or whichever is greater in an ambient ..
The RayTemp 8 Infrared Thermometer is compact, gun-shaped, lightweight and easy to use. Simply aim, then pull the trigger to display the temperature of the item being measured. The LCD display gives a digital read-out of temperature over the range of -60 to 500°C.
This infra-red thermometer has a clear, easy to read, LCD display with low battery indication and incorporates an auto power off facility that turns the instrument off after 60 seconds, maximisi..
The RayTemp 28 is a professional infrared, non-contact thermometer with dual laser dot alignment. The thermometer incorporates a 30:1 optic ratio (target distance/diameter ratio), which enables users to measure small targets from a distance or any item that is difficult to reach.
The thermometer features a three-button keypad, allowing the user to select the mode required, i.e. max, min, differential or average temperatures, view the max/min and configura..
The RayTemp 38 is a professional infrared, gun-shaped, non-contact thermometer with dual laser dot alignment. The thermometer incorporates a 50:1 optic ratio (target distance/diameter ratio), this enables users to measure small targets from a distance. The user stands a safe and comfortable distance from the target, points the thermometer at the surface to be measured, pulls the trigger and instantly reads the temperature. Ideal for measuring the temperatu..
The Trolmaster TSH-1 Temperature / Humidity Station is a 0-10 volt analog output control station that works with the HCS-1 and HCS-2 controllers. The TSH-1 can be configured to control either a temperature or a humidity device that requires a variable 0-10 volt input signal.
The TSH-1 is capable of controlling variable speed fans, vents or any other device that accepts a 0-10 volt input. It features separate day and night “idle” speed settings built-into ..
Nutrition tailored specifically to plants growing in coco!
TEMPLE RISE A and TEMPLE NOON B is a two-part base nutrient package designed specifically for plants growing in coco. Plants growing in coco (coir/coconut fibre) require a different ratio of nutrients to those growing in soil or a rockwool-based hydroponic system. This is because of the need to counter the naturally high potassium and sodium levels in the coco, and to take advantage of the coco’s ..
This EC fan controller have temperature, minimum- and maximum speed setting on three knobs. It is easy to use. The EC fan controller get supplied with a 4m long cable including a 3.5mm 4pole stereo jack connector to the fan and a 4m long Temperature senor.
It comes as a finish product together with a power supply. The eutput signal is 0-10V or on demand a PWM (pulse wide modulation) signal. If the EC-fan support a PWM signal the controller is able t..
The step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the humidity and temperature. Temperature and hysteresis (sensitivity) can be set on two knob's as well humidity and humidity-hysteresis on the other two knobs.
The controller comes as a finished part and is ready to use. This reliable fan controller co..
The step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the humidity and temperature. Temperature and hysteresis (sensitivity) can be set on two knob's as well humidity and humidity-hysteresis on the other two knobs.
The controller comes as a finished part and is ready to use. This reliable fan controller co..
The step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the humidity and temperature. Temperature and hysteresis (sensitivity) can be set on two knob's as well humidity and humidity-hysteresis on the other two knobs. The intake fan runs 1step behind the exhaust fan to prevent odour from escaping.
Sample: Exh..
The step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the humidity and temperature. Temperature and hysteresis (sensitivity) can be set on two knob's as well humidity and humidity-hysteresis on the other two knobs. The intake fan runs 1step behind the exhaust fan to prevent odour from escaping.
Sample: Exh..
Dual-mode fan speed controller with integrated plug. In LOGIC Mode, LogicFan™ Temperature Controller will make predictive changes to fan speed to maintain the set temperature. In BASIC mode, works just like BasicFan™ Speed Controller providing manual fan speed control. Switch between the two modes as required.
Compact design will not obstruct adjacent plug sockets.
Features
Controls 1 fan
Dual-mode
Compact design
Will not obstruct adjacent..
Set target room temperature and the TwinFan™ Temperature Controller will make predictive changes to intake and outtake fan speed to maintain the set temperature.
Xtra Fan-Speed™ and Night-Pulse™ ensure optimal atmospheric conditions for a healthy growing environment.
Features
Controls up to 2 fans
Fixed Temperature Sensor NTC 3m
Fixed Night-Pulse™ Sensor LDR 3m
Integral Wall Mount
Power Lead 3m
CE Certified
2-year warranty
Included i..
The combination of a heavy-duty step transformer with Enviro-Sense™ Night-Pulse™ and Dynamic-Mode™ brings together the 5th generation of this style of controller.
The DigiStep™ Temperature Controller delivers more dynamic fan speed control and improved accuracy than more traditional ‘hybrid’ style controllers. Set target room temperature and the DigiStep™ Temperature Controller will make predictive changes to intake and outtake fan speed to maintain the s..
The SuperSilent™ Temperature Controller with Perfect-Sine™ combines the most desirable and sought after combination of features into this state of the art fan controller.
Ultra-silent AND ultra-smooth fan speed control that is highly accurate, energy-efficient and kind on motors. Set target room temperature and the SuperSilent™ Temperature Controller will make predictive changes to intake and outtake fan speed to maintain the set temperature.
Fea..
Temperature and Speed fan controller for noiseless and easy to use control of EC fans. Plug and play controller with a 4 m cable with a 3.5 mm 4 pole jack connector to easily connect it to our EC fans, and a temperature sensor. This EC fan controller is compatible with our one speed AC fans using the Satellite 4A.
Plug and play, easy to use
Temperature control
Minimum and maximum speed settings
No power supply required..
The SMSCOM Twin Controller and SPC Temperature Controllers come as standard with a 2 meter temperature sensor. If 2 meters is not long enough and you need a longer probe on your SMSCOM controller then here it is!..
The P50 Pro pH temp meter is the latest tool in Aqua Master Tools’ wide range of high quality products. Ideal for measuring pH and temperature of liquid plant nutrition and water in swimming pools, Jacuzzi’s, and ponds.
Effortlessly switch between the parameters with the user-friendly buttons. The meter is delivered fully calibrated and includes batteries.
How does the meter work?
Prior first usage - soak your pH meter in tap water for..
The E50 Pro EC temp meter is the latest tool in Aqua Master Tools’ wide range of high quality products. Ideal for measuring EC and temperature of liquid plant nutrition and water in swimming pools, Jacuzzi’s, and ponds.
Effortlessly switch between the parameters with the user-friendly buttons. The meter is delivered fully calibrated and includes batteries.
How does the meter work?
Remove the protective cover.
Gently clean the electrod..
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Spare part for:
FC01 Temperature and min. speed controller
FC02 Temperature and min.- maximum hysteresis controller
FC03 Temp. step transformer controller
FC04 Humidity & temp. step transformer controller
FC11 Temperature and negative pressure controller (2fan) 2A..
TrolMaster's new PCT-3 EC & temperature probe has been improved in several ways. The new PCT-3 features a reduced diameter protective sleeve and threaded body that will allow the probe to be installed into standard 3/4" PVC tee fittings. The PCT-3 also has an improved sensor element for more stable and reliable performance and we have reduced the length of the probe to fit into tight spaces. Can be used with the AMP-2 or the AMP-3 nutrient sensor modul..
Why Guard when you can Monitor! The Milwaukee MC810 MAX pH/EC/Temp.
Monitor lets you monitor your pH/TDS/Temp levels 24/7 automatically.
Comments From Field Testing
“I run this unit 24/7 and have not had any problems for the past two months. I can monitor 24/7, point a camera on it and connect to my phone.”
“Easy to calibrate.”
“Using this now, far less expensive than what my friends paid … I recommend this to any serious grower.”
Summary
The MC811 ..
The Temperature Sensor is designed for use with a controller, feeding information about the grow area’s environment back to the Controller’s on-board computer.
Measures temperature levels in the grow area.
Highly accurate, professional grade equipment.
Designed for use with a controller.
Ten metre long cable.
How It Works
The temperature sensor gathers information on the temperature of your grow area and feeds it back to the Controller. T..
The Milwaukee MW804 MAX Waterproof 4-in-1 pH/EC/TDS/Temp Tester is designed as an all-in-one solution for growers.
Accuracy
The MW804 MAX 4-in-1 tester is accurate to ±0.05 pH, EC/TDS to 2% Full Scale and ±0.5°C / ±1°F for temperature.
With automatic calibration and 5 memorized calibration points, the tester can be quickly and easily be calibrated to a higher accuracy compared with manual calibration.
Long life
The tester comes with a replaceable pH p..
The updated Combo Pen P110 Pro features a modern and robust housing. The improved software now ensures quicker readings of accurate measurements. You can easily replace the electrode should it be worn or damaged.
The Combo Pen P110 Pro is ideal for measuring the EC, pH and temperature of liquid plant nutrition and water in swimming pools, Jacuzzis and ponds. The user-friendly buttons can be used to effortlessly switch between..
The updated Combo Pen P160 Pro features a modern and robust housing. The major advantage of this model is its analogue EC calibration. This means that the calibration solution does not need to have a temperature of exactly 25ºC.
Calibration takes place without any deviations. EC calibration solutions are extremely sensitive to temperature. However, this does not apply to pH. You can easily replace the electrode should it be worn or dam..
Grow Gadgets Thermometer Waterproof Probe is designed to give fast and accurate temperature readings in damp conditions.
Designed for Easy Reading
At the push of a button, Grow Gadgets Thermometer will display the highest and lowest values recorded since the unit was last reset, on its large LCD, designed for easy reading. This high-quality tool can also display in both F or C, purely for the grower’s convenience - it is so simple to use!
Features
La..
A digital controller designed to enhance your AC Infinity fan with smart controls to maintain a stable climate. This intelligent command unit features a black powder-coated body and a backlit LCD screen that presents a sleek aesthetic. The display has three brightness levels, as well as two auto brightness settings, and reads temperatures in Fahrenheit or Celsius. It includes a 12-foot sensor probe with a waterproof thermalloy head that accurately detects ..
Quick to setup and simple to use, this monitor was designed with hydroponics, aquaponics, and greenhouses in mind.
Make your nutrient solution easy to manage with the Groline monitor and combined pH/EC/temperature probe.
Instantly view all measurements
The versatile display of the Groline monitor allows for three screen modes. The LCD can display all three essential hydroponic nutrients measurements at one time, a 3-second cycle of single measurements, ..
Designed for agricultural professionals, this meter joins the Hanna 98 series of quality pH meters which are rugged and portable with the performance and features of a benchtop. It is also an addition to the GroLine range.
Application importance
The measurement of pH in agricultural activities is very important due to the influence it has on the growth of the plant. Soil can be acid, neutral or alkaline according to its pH value. Most plants prefer a pH ..
The pocket sized PRIMO3 tester provides a fast and dependable way to measure the total dissolved solids in water samples.
The PRIMO3 is ideally suited to the rigorous demands of water quality professionals who will appreciate the practicality of the clear, easy to read LCD for demonstrating the before and after results of conditioning and filtration systems.
Temperature is compensated automatically to ensure the readings are consistent to the standard or..
The HI-8314 is a handheld pH/mV/°C meter designed to be reliable and easy-to-use. The HI-8314N is also supplied with the HI-1217D pre-amplified pH electrode and internal temperature sensor.
Manual calibration is performed at one or two points by adjusting the trimmers on the front panel. This instrument is ideal for applications that require a custom calibration point. Manual calibration can be extremely useful in order to achieve better accuracy.
..
The HI-99121 portable pH meter, together with HI-12923 pH electrode, is designed to measure pH in soil or soil slurries.
The HI-99121 is a lightweight, portable pH and temperature meter. It features a two button operation system and is simple to use. It has a waterproof and compact casing, large dual-line display, and automatic pH calibration at one or two points.
Main features
Simultaneous pH and temperature measurements on a large dual-line..
The DiST's ease of use, in combination with its affordability, makes it the must-have equipment for EC and TDS measurement. PPM.
With an impressive range of features, the HI-98311 pocket tester is unmatched in the marketplace for EC/TDS and temperature measurement.
Designed for ease of use with a floating, waterproof case and offer the following features:
Measurement of conductivity (EC) and total dissolved solids (TDS) Automatic calibration and tempera..
The new and improved HI-99301. With it's larger user friendly LCD, tutorial messages for calibration and setup, missing probe indicator, newer rugged ergonomic casing, faster and easier battery replacement and probe situated on the bottom of the instrument for ease ot use, the updated model is much more effiecent.
The HI-99301 is a portable, EC/TDS/temperature meter that measures high range conductivity in mS/cm and TDS in ppt. Both instruments are housed..
The HI-991300 is a light weight, portable pH, conductivity and temperature meter for portable applications requiring both a pH and conductivity measurement. Applications include measurements for greenhouses irrigation, hydroponics and groundwater monitoring from agriculture nutrient pollution.
The HI-991300 meter features two operation button and is simple to use. All operations and settings, including calibration buffers and temperature scale selections,..
Probe for pH/pH+ORP/ISE, DO, EC, temperature with HI-7698295 short protective shield and 10m cable.
The use of Hanna’s microprocessor-based multiparameter intelligent probes with HI-9829 will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and manmade pollution to effectively evaluate applications for waste discharge permits, remediate contami..
The HI-7629829 is a multi-parameter pH/ISE/EC/DO/Turbidity/Temperature autonomously logging probe for use with the HI-9829 portable meter. Sensors are automatically recognised by the probe and meter when connected.
Logging probe for pH/ISE/EC/DO/Turbidity/Temperature with HI-7698295 short protective shield and 4m cable.
For use with the HI 9829 multiparameter.
Sensor replacement is quick and easy with field replaceable, screw type connectors colour-code..
Probe for pH/pH+ORP/ISE, DO, EC, temperature with HI-7698295 Short Protective Shield and 4m cable.
The use of Hanna’s microprocessor-based multiparameter intelligent probes with HI-9829 will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and manmade pollution to effectively evaluate applications for waste discharge permits, remediate contamin..
This meter features a large LCD which displays either pH, EC, TDS or temperature readings along with tutorial instructions. The pH readings are displayed with a 0.1 resolution and an accuracy of ±0.1 pH while the EC and TDS readings are displayed with a 0.01 mS/cm and 1ppm (mg/L) resolution and 2% full scale accuracy.
The EC range of both meters is from 0.00 to 4.00 mS/cm and TDS is from 0 to 1999ppm.
The temperature correction coefficient (β) is fixed a..
Plastic case tube fans with built in thermostat and temperature controller. The fan has an idle speed to always maintain negative air pressure. It will then automatically adjust its speed through three higher speed settings to maintain the desired temperature.
The control system is integrated into the unit and completely wired. Speed control is done by winding taps, so there is no extra noise caused by a controller.
Features:
Backward curved c..
An OptiClimate canopy temperature camera can be connected to the system to monitor evaporation from the crop: an excessive canopy temperature is indicative of problems with the plants' evaporation capacity (for example, due too little water or excessive light).
If the canopy temperature rises to an excessive level then the DimLux ballasts are dimmed or switched off until the temperature falls to an acceptable level: failure to lower an excessive canopy te..
With 8 Outputs the Harvest Master Climate Controller is capable of many things.
The Climate Controller from Harvest Master takes the guesswork out of growing your plants and turning them into a crop. With the Harvest Master Climate you simply plug the machine in and it automatically checks what you have connected and how it works.
You hardly need to open the manual. the system is capable of learning pretty much everything, and keep on lea..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The minimum speed controller is a temperature depended speed controller for ventilated rooms with one or more fans. The minimum speed controller keeps the temperature constantly and impedes to run under the set minimum-speed. It can be easily controlled, adjusting the required temperature and the minimum speed on two knobs.
The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistan..
This digital temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one or more exhaust fans (up to 600 watt).
The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, ma..
This digital fan controller is a humidity and temperature dependent speed controller for rooms with intake and exhaust fans (2 x 600watt). The fan controller keeps the room humidity and temperature constant and under pressure to prevent odour from escaping.
A reliable fan controller complete with:
Sealed water resistant cover
Plugs with flap-lids and a low voltage sensor making it perfect for humid rooms.
Protection class IP44
Digital sensor supplie..
Temperature is one of the most important environmental factors in your grow room / glasshouse all plants have an optimum temperature at which they will grow at and a minimum and maximum temperature that they can survive therefore temperature is very important to the health & growth rate of all plants.
The Evolution digital temperature control System constantly monitors the temperature in the growing area and independently controls fans, heaters and hu..
Essential Trident - pH, EC/CF and Temp Meter - Highly accurate, professional all-in-one meter for easy nutrient control
The all-in-one conductivity, pH and temperature meter is designed to make nutrient measurement quick and easy. It can be used as a stirrer and makes it easier to take readings in deep tanks.
Accurate and rapid conductivity, pH and temperature measurement - Nutrient strength in EC, CF or PPM - Easy push button calibration - Auto turn-off..
The new HortiStick is a three-in-one instrument that combines the measurement of pH, conductivity (mS) and temperature. The unit simultaneously displays nutrient concentration along with either pH or temperature. This simple, easy to use meter is ideal for the testing of hydroponic solutions and water treatment processes.
The instrument features two clear LCD displays and indicates pH and temperature over the range of 0 to 14 pH and 0 to 49.9 °C. The Hor..
Advanced microprocessor for fast efficient readings. Hold Function: saves measurements for convenient reading and recording. Built-in digital thermometer.
Fantastic value! Advanced microprocessor for fast efficient readings
Hold Function: saves measurements for convenient reading and recording
Auto-off function: the meter shuts off after 10 minutes of non-use to conserve batteries
Built-in digital thermometer
Comes with carry case
3 ..
Advanced microprocessor for fast efficient readings. Hold Function: saves measurements for convenient reading and recording. Built-in digital thermometer.
Fantastic value! Advanced microprocessor for fast efficient readings
Hold Function: saves measurements for convenient reading and recording
Auto-off function: the meter shuts off after 10 minutes of non-use to conserve batteries
Built-in digital thermometer
Comes with carry case
3 ..
Measures EC, TDS and temperature. Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl). Automatic temperature control (ATC) using three temperature co-efficiencies.
High-end EC meter
Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl)
Automatic temperature control (ATC) using three temperature co-efficiencies
Digital calibration (push button) to any point within the meter’s range
Auto-off functi..
Measures EC, TDS and temperature. Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl). Automatic temperature control (ATC) using three temperature co-efficiencies.
High-end EC meter
Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl)
Automatic temperature control (ATC) using three temperature co-efficiencies
Digital calibration (push button) to any point within the meter’s range
Auto-off functi..
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration.Includes a 7.0 pH buffer powder packet and a dropper of KCI electrode storage solution.
High-end PH meter
Resolution: pH: 0.01 pH, 0.00 – 14.0 pH
Accurate to +/- 0.02 pH
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration
Low battery indicator
Replaceable probe
Clear cap to notice moisture(or lack of) on probe
Glass encased ..
The 8100 pH and temperature meter features an easy to read, LCD display and is supplied as a kit which includes a 8100 pH meter, general purpose combination glass electrode, temperature probe, 4.01 and 7.00 pH buffer solutions and carrying case.
The 8100 pH meter indicates pH over the range of 0 to 14 pH with a resolution of 0.01 pH and temperature over the range of 0 to 99.9 °C with a resolution of 0.1 °C. The pH readings are automatically temperature co..
The THERM -B1 temperature controller is designed to activate a cooling or heating device. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control temperature between 7 to 35’C.
Activate a cooling heating device up to 15 amps
Separate Day and Night temperature settings
A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable me..
Temperature is one of the most important environmental factors in your grow room / glasshouse all plants have an optimum temperature at which they will grow at and a minimum and maximum temperature that they can survive therefore temperature is very important to the health & growth rate of all plants.
The Evolution digital temperature control System constantly monitors the temperature in the growing area and independently controls fans, heaters and hu..
Temperature and Humidity alarm sensors for surveliance of the min. / max Temperature and Humidity.
The settings will be done over the GSM telephone. The sensor respond via SMS if the temperature or the Humidity is over/under the setting.
The sensor comes with 6m cable.
Sizes and technical data's:
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Humidity accuracy ±4.5%rh
..
New Version now available - Click Here
The Bluelab Guardian Monitor Connect is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you.
It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark fo..
The SMSCOM Temp Protector provides a failsafe system that protects the room against excessive temperatures. Should the room overheat, the Temp Protector will automatically switch off a number of lights to allow the temperature to drop back to safe levels.
After plugging your lighting contactor/relay into the Temp Protector, simply set the maximum temperature cut off point for your room. Should the temperature in your room ever exceed your set point, the u..
The ultimate handy solution for measuring soil pH and temperature!
The Bluelab Soil pH Pen provides a pH and temperature reading of soils and media, so you know that the right nutrients will be made available to your plants.
In soils or growing media, pH strongly influences the availability of the microorganisms to plants in the soil. Now you can closely monitor and adjust the pH levels to optimize plant health and performance.
It will also ..
The Mini RayTemp® infrared thermometer is a compact, lightweight and low cost infrared thermometer. Simply aim and pull the trigger to display the temperature of the item being measured.
The Mini RayTemp® measures temperature over the range of -50 to 330°C with an assured accuracy of ±2°C over the range of 0 to 330°C, outside of this range (-50 to 0°C) accuracy is ±4°C.
This infrared thermometer has a clear, easy to read, LCD display with low battery, an..
The new RayTemp 6 infrared thermometer is a compact, durable and easy to use instrument, simply aim and pull the trigger to display the temperature of the item being measured.
Each thermometer incorporates an eight dot circle laser indicator, which allows you to precisely target the diameter of the area to be measured. As you move closer or further from the target the laser circle changes diameter. The unit incorporates an 12:1 optic ratio (target distanc..
OptiClimate CO2 Monitor with humidity (RH) and temperature sensor. The OptiClimate CO2 Monitor clearly indicates the CO2 level in the room. This device is also equipped with a humidity sensor and a temperature sensor. Furthermore, these values are clearly readible in the digital display of the CO2 monitor. This CO2 monitor can only be used as a reference, and has no adjustment options...
Dimlux Temperature and Humidity Module
With the Dimlux Aux Box you can now manage your Temperature and humidity parameters.
The Auxbox is connected to the Dimlux Maxi Controller through the Auxiliary port on the unit with this module you can connect a heater/heating system, humidifier or dehumidifier to control the Relative humidity, Temp and RH Set points for both day and night operation within your micro climate...
The All New nGrow Lighting and Temperature Controller
from Secret Jardin
The new Secret Jardin nGrow is easy to set up and has many great features. It's unique design and functionality ensures almost limitless flexibility of use. Simply set the time when you want the lights on, the duration, and desired room temperature, then sit back while the nGrow does the work for you. A night time temperature and temperature override function can also be set if requi..
The dimmable electronic ballast ADVANT 2V2 temperature control MOD has the IP65 rating which gives it a resistance to penetration of liquids and solids. It is noted for its high quality, stability and maintenance of bulb starts. The safest and most reliable ballast on the market comes equipped with a probe that controls power to the ballast intelligently depending on the temperature of the growing environment, this makes temperature..
This all-in-one sensor measures CO2, temperature, humidity and detects light simultaneously. Also, the sensor is equipped with a built-in calibration function to calibrate the CO2 sensor against outdoor air. The calibration menu is only accesible through a CO2 controller. Also equipped with a built-in switch to prevent unwanted calibration...
The EMS-Pro is the culmination of a lengthy research and development program at Ecotechnics, our design goal was to create a simple usb sensor to measure temperature, humidity & CO2 levels and to record them for later analysis.
Key features:
Plug and play USB sensor
Windows compatible
Realtime graphics display
Records all levels for graphing
1 year warranty..
D1-TMP/Digital Temperature Controller
The D1-TMP Digital Day/Night temperature controller is a very accurate device that allows the user to control EITHER a cooling or heating device.
A two meter long water-proof remote temperature sensor can be placed where it can sense the water or air temperature that the D1-TMP will be controlling.
The user first selects whether they are controlling a cooling or a heating device.
Feature with Day and Night temper..
HM-500: Continuous pH/EC/TDS/Temp Monitor
hydromasterThe HM Digital HydroMaster (HM-500) monitors pH, Temp˚C/˚F, EC & TDS providing accurate, stable readings the user can rely on. The unit can be wall mounted, is portable thanks to its rechargeable battery, and can be used as a benchtop monitor with its stand.
Continuous pH/EC/TDS/Temp Monitor
Rechargeable battery
RF Resistant
Portable/Wall Mount/Benchtop
Data Storage: Up to 20 measurement read..
The HI-9814 is a lightweight, waterproof portable pH, conductivity, TDS and temperature meter supplied with a specialist multiparameter probe designed for hydroponics, greenhouse and agricultural applications.
Key features
Compact, robust casing
Simultaneous readout of pH, EC or TDS and °C
Simple two button keyboard
Waterproof design to withstand the humidity of a growing environment
Specialist multi-parameter electrode
Optional green protective r..
The HI-98131 is a slim, lightweight, and waterproof pocket tester that measures pH, conductivity, TDS and temperature. This versatile pocket meter is designed for hydroponics, greenhouse and agriculture applications.
The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI-98131 has advanced features including a selectable EC to TDS conversion fac..
The HI-98118 pH/temperature tester is our latest pocket meter for measuring the pH of a hydroponic nutrient solution. The ergonomic design allows this tester to fit comfortably in your hand. The large easy to read LCD display shows both pH and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one or two point calibration.
T..
The HI-98318 is our latest pocket meter for measuring the EC/TDS of a hydroponic nutrient solution. The ergonomic design allows this tester to fit comfortably in your hand. The large easy to read LCD display shows both EC or TDS and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one point calibration.
The GroLine Waterpr..
Take the guesswork out of your room with these easy-to-use, reliable and efficient digital fan controller.
The Prima Klima Temperature Controllers couldn’t be easier to use. Simply set your desired room temperature and let it do the work of controlling your fans to achieve a constant, optimum temperature for your room, ensuring that all-important negative room pressure and giving total environmental control.
ISO 9003 product (Triple checked and control..
Take the guesswork out of your room with these easy-to-use, reliable and efficient digital fan controller.
The Prima Klima Temperature Controllers couldn’t be easier to use. Simply set your desired room temperature and let it do the work of controlling your fans to achieve a constant, optimum temperature for your room, ensuring that all-important negative room pressure and giving total environmental control.
ISO 9003 product (Triple checked and control..
The OCL X-series, with extremely powerful and higher PAR output than traditional fixtures, ask for a smart controller. That is why OCL designed the world’s smartest and yet easy to operate lighting controller.
All sensors (TEMP/RH/CO2) can be calibrated, it detects sensor failures and when a connection is not set-up properly a warning will automatically be displayed.
The OCL DLC-1.1 Smart Lighting and CO2-Controller (sold seperately) includes a built-in ..
Grow Room Monitoring 24/7 non-stop
Wirelessly sync with mobile and powered by a small button cell battery (CR2354), the net weight of AirComfort is well below 40g. Despite the light weight of the device, each AirComfort can store up to 100 days / 4032 sets of data – therefore even when the mobile is out of range, the data will be able to retrieve once it connects to your mobile again.
One APP can connect up to 32 AirComfort
If you need to monitor more t..
BETA-4 is a simple and practical temperature controller. It utilizes a highly visible and intuitive LED screen to let you know current temperature level or the max/min temperature recorded values.
Includes:
1 x Temperature Controller
1 x Temperature Sensor
Specifications:
Input Voltage: 120 Volts AC
Output Switch: Triac
Fuse Rating: 6A/250V~
AC Power Cord Length: 1.8m
Temperature Control Range: 40-100°F
Temperature Deadband: 5°F
Package Dim..
PCT-1 Reservoir EC/Temp Sensor is specially designed for Aqua-X Irrigation Control System. The EC/Temp electrode probe has a single cylinder that allows direct connection to the terminal of the AMP-2 Sensor Board. It is accurate and reliable that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the EC level and water temperature.
Features:
Suitable for wide range of applications: Hydrop..
PCT-2 Inline EC/Temp Sensor is specially designed for Aqua-X Irrigation Control System. The EC/Temp electrode probe has a single cylinder that allows direct connection to the input terminal of the AMP-2 Sensor Board. It is accurate and heavy duty that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the EC level and water temperature.
Features:
Suitable for wide range of applications: H..
The SmartBee™ LTH+CO2 Sensor is designed to allow better access to plant canopy, where placement accuracy is essential to monitor correct levels of CO2 levels. The lithium ion battery powered sensor is also Solar charged and can ensure a constant level of CO2 while maximizing efficiency and economy. Should you employ CO2 injection for maximizing growth, The SmartBee™ system works by sampling the air and sending sample data to the Hive Gateway. The Hive the..
SmartBee™ System's LTH sensors are core components that allow you fine-tuned control. They continuously monitor light, temperature and humidity wirelessly within the garden. One of the many smart features of the SmartBee™ LTH Sensor is a pair of solar panels on top of the unit that harvest excess energy from the lights, keeping the Li-po battery charged. You can deploy multiple LTH sensors to monitor specific areas of your garden, utilizing the readings fr..
Specially designed for the control of 240V temperature devices in the Hydro-X Control System. 240V temperature control relay, single pack with cable set. Same as the DST-1 except 240v instead of 120v.
Features:
LED Power Indicator
3-Prong Attaching Plug
RJ12 Cable Socket
Addressing
Plug & Play
Contents:
1 x Device Station
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter
Specifications:
Input Voltage: 240 VAC, 50/60Hz
Out..
SMART-VPD Temp / Humidity Controller
The Smart VPD controls Humidifiers/De-humidifiers & Heaters in the growroom. It optimises ‘Vapour Pressure Deficit’ in order to ensure plants are transpiring at the optimum rate during all stages of growth. Built on AEI technology, the controller will adapt and learn to work with the users individual set-up, taking into account other grow room equipment and their overall effect on the environment. Connects to the M..
Linx 600W Dimmable Ballast
Multi linkable digital ballast
High PAR levels
0.10v digital wattage adjustment
Parlux Master Controller ready
Soft start technology
Compatible with 600W High Pressure Sodium (HPS) or Metal Halide (MH) lamps
Silent, compact and lightweight
Includes cable to connect to the next ballast in the chain
By using the Parlux Master Controller (sold separately) you can mix two different light outputs within the same growing ar..
315W Dimmable Controllable Ballast
Multi-linkable CDM ballast
Highly efficient: 1.9 micromole per watt of electricity
High PAR levels
Compatible with reflectors when using an E40 to 315W adapter
0.10v temperature control adjustment
Parlux Master Controller ready
Soft start technology
Dynamic frequency control
Silent, compact and lightweight
By using the Parlux Master Controller (sold separately) you can mix two different light outputs within t..
The updated Combo Pen P100 Pro features a modern and robust housing. The improved software now ensures quicker readings of accurate measurements. You can easily replace the electrode should it be worn or damaged.
The Combo Pen P100 Pro is ideal for measuring the EC, pH and temperature of liquid plant nutrition and water in swimming pools, Jacuzzis and ponds. The user-friendly buttons can be used to effortlessly switch between the parameters. The meter is ..
Dependable temperature probe technology that's built to last.
For use with Bluelab pH Controller and Bluelab Pro Controller
Measure temperature of solutions to ±0.1°C/°F in reservoirs
Fully waterproof and can be submerged in reservoirs
Robust stainless-steel construction
Effective in nutrient solution
Fast sensor response for quick and accurate measurements
Easy to clean and maintain
Low maintenance – no calibration needed
2-metre/6.5..
The RayTemp 3 Infrared Thermometer is compact, lightweight and easy to use. Simply aim and pull the trigger to display the temperature of the item being measured. In addition the LCD will display the maximum temperature.
The RayTemp®3 infrared thermometer measures temperature over the range of -60 to 500°C with an assured accuracy of ±1°C over the critical food range of 0 to 65°C, outside of this range ±2% of reading or whichever is greater in an ambient ..
The RayTemp 8 Infrared Thermometer is compact, gun-shaped, lightweight and easy to use. Simply aim, then pull the trigger to display the temperature of the item being measured. The LCD display gives a digital read-out of temperature over the range of -60 to 500°C.
This infra-red thermometer has a clear, easy to read, LCD display with low battery indication and incorporates an auto power off facility that turns the instrument off after 60 seconds, maximisi..
The RayTemp 28 is a professional infrared, non-contact thermometer with dual laser dot alignment. The thermometer incorporates a 30:1 optic ratio (target distance/diameter ratio), which enables users to measure small targets from a distance or any item that is difficult to reach.
The thermometer features a three-button keypad, allowing the user to select the mode required, i.e. max, min, differential or average temperatures, view the max/min and configura..
The RayTemp 38 is a professional infrared, gun-shaped, non-contact thermometer with dual laser dot alignment. The thermometer incorporates a 50:1 optic ratio (target distance/diameter ratio), this enables users to measure small targets from a distance. The user stands a safe and comfortable distance from the target, points the thermometer at the surface to be measured, pulls the trigger and instantly reads the temperature. Ideal for measuring the temperatu..
The Trolmaster TSH-1 Temperature / Humidity Station is a 0-10 volt analog output control station that works with the HCS-1 and HCS-2 controllers. The TSH-1 can be configured to control either a temperature or a humidity device that requires a variable 0-10 volt input signal.
The TSH-1 is capable of controlling variable speed fans, vents or any other device that accepts a 0-10 volt input. It features separate day and night “idle” speed settings built-into ..
Nutrition tailored specifically to plants growing in coco!
TEMPLE RISE A and TEMPLE NOON B is a two-part base nutrient package designed specifically for plants growing in coco. Plants growing in coco (coir/coconut fibre) require a different ratio of nutrients to those growing in soil or a rockwool-based hydroponic system. This is because of the need to counter the naturally high potassium and sodium levels in the coco, and to take advantage of the coco’s ..
This EC fan controller have temperature, minimum- and maximum speed setting on three knobs. It is easy to use. The EC fan controller get supplied with a 4m long cable including a 3.5mm 4pole stereo jack connector to the fan and a 4m long Temperature senor.
It comes as a finish product together with a power supply. The eutput signal is 0-10V or on demand a PWM (pulse wide modulation) signal. If the EC-fan support a PWM signal the controller is able t..
The step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the humidity and temperature. Temperature and hysteresis (sensitivity) can be set on two knob's as well humidity and humidity-hysteresis on the other two knobs.
The controller comes as a finished part and is ready to use. This reliable fan controller co..
The step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the humidity and temperature. Temperature and hysteresis (sensitivity) can be set on two knob's as well humidity and humidity-hysteresis on the other two knobs.
The controller comes as a finished part and is ready to use. This reliable fan controller co..
The step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the humidity and temperature. Temperature and hysteresis (sensitivity) can be set on two knob's as well humidity and humidity-hysteresis on the other two knobs. The intake fan runs 1step behind the exhaust fan to prevent odour from escaping.
Sample: Exh..
The step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the humidity and temperature. Temperature and hysteresis (sensitivity) can be set on two knob's as well humidity and humidity-hysteresis on the other two knobs. The intake fan runs 1step behind the exhaust fan to prevent odour from escaping.
Sample: Exh..
Dual-mode fan speed controller with integrated plug. In LOGIC Mode, LogicFan™ Temperature Controller will make predictive changes to fan speed to maintain the set temperature. In BASIC mode, works just like BasicFan™ Speed Controller providing manual fan speed control. Switch between the two modes as required.
Compact design will not obstruct adjacent plug sockets.
Features
Controls 1 fan
Dual-mode
Compact design
Will not obstruct adjacent..
Set target room temperature and the TwinFan™ Temperature Controller will make predictive changes to intake and outtake fan speed to maintain the set temperature.
Xtra Fan-Speed™ and Night-Pulse™ ensure optimal atmospheric conditions for a healthy growing environment.
Features
Controls up to 2 fans
Fixed Temperature Sensor NTC 3m
Fixed Night-Pulse™ Sensor LDR 3m
Integral Wall Mount
Power Lead 3m
CE Certified
2-year warranty
Included i..
The combination of a heavy-duty step transformer with Enviro-Sense™ Night-Pulse™ and Dynamic-Mode™ brings together the 5th generation of this style of controller.
The DigiStep™ Temperature Controller delivers more dynamic fan speed control and improved accuracy than more traditional ‘hybrid’ style controllers. Set target room temperature and the DigiStep™ Temperature Controller will make predictive changes to intake and outtake fan speed to maintain the s..
The SuperSilent™ Temperature Controller with Perfect-Sine™ combines the most desirable and sought after combination of features into this state of the art fan controller.
Ultra-silent AND ultra-smooth fan speed control that is highly accurate, energy-efficient and kind on motors. Set target room temperature and the SuperSilent™ Temperature Controller will make predictive changes to intake and outtake fan speed to maintain the set temperature.
Fea..
Temperature and Speed fan controller for noiseless and easy to use control of EC fans. Plug and play controller with a 4 m cable with a 3.5 mm 4 pole jack connector to easily connect it to our EC fans, and a temperature sensor. This EC fan controller is compatible with our one speed AC fans using the Satellite 4A.
Plug and play, easy to use
Temperature control
Minimum and maximum speed settings
No power supply required..
The SMSCOM Twin Controller and SPC Temperature Controllers come as standard with a 2 meter temperature sensor. If 2 meters is not long enough and you need a longer probe on your SMSCOM controller then here it is!..
The P50 Pro pH temp meter is the latest tool in Aqua Master Tools’ wide range of high quality products. Ideal for measuring pH and temperature of liquid plant nutrition and water in swimming pools, Jacuzzi’s, and ponds.
Effortlessly switch between the parameters with the user-friendly buttons. The meter is delivered fully calibrated and includes batteries.
How does the meter work?
Prior first usage - soak your pH meter in tap water for..
The E50 Pro EC temp meter is the latest tool in Aqua Master Tools’ wide range of high quality products. Ideal for measuring EC and temperature of liquid plant nutrition and water in swimming pools, Jacuzzi’s, and ponds.
Effortlessly switch between the parameters with the user-friendly buttons. The meter is delivered fully calibrated and includes batteries.
How does the meter work?
Remove the protective cover.
Gently clean the electrod..
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Spare part for:
FC01 Temperature and min. speed controller
FC02 Temperature and min.- maximum hysteresis controller
FC03 Temp. step transformer controller
FC04 Humidity & temp. step transformer controller
FC11 Temperature and negative pressure controller (2fan) 2A..
TrolMaster's new PCT-3 EC & temperature probe has been improved in several ways. The new PCT-3 features a reduced diameter protective sleeve and threaded body that will allow the probe to be installed into standard 3/4" PVC tee fittings. The PCT-3 also has an improved sensor element for more stable and reliable performance and we have reduced the length of the probe to fit into tight spaces. Can be used with the AMP-2 or the AMP-3 nutrient sensor modul..
Why Guard when you can Monitor! The Milwaukee MC810 MAX pH/EC/Temp.
Monitor lets you monitor your pH/TDS/Temp levels 24/7 automatically.
Comments From Field Testing
“I run this unit 24/7 and have not had any problems for the past two months. I can monitor 24/7, point a camera on it and connect to my phone.”
“Easy to calibrate.”
“Using this now, far less expensive than what my friends paid … I recommend this to any serious grower.”
Summary
The MC811 ..
The Temperature Sensor is designed for use with a controller, feeding information about the grow area’s environment back to the Controller’s on-board computer.
Measures temperature levels in the grow area.
Highly accurate, professional grade equipment.
Designed for use with a controller.
Ten metre long cable.
How It Works
The temperature sensor gathers information on the temperature of your grow area and feeds it back to the Controller. T..
The Milwaukee MW804 MAX Waterproof 4-in-1 pH/EC/TDS/Temp Tester is designed as an all-in-one solution for growers.
Accuracy
The MW804 MAX 4-in-1 tester is accurate to ±0.05 pH, EC/TDS to 2% Full Scale and ±0.5°C / ±1°F for temperature.
With automatic calibration and 5 memorized calibration points, the tester can be quickly and easily be calibrated to a higher accuracy compared with manual calibration.
Long life
The tester comes with a replaceable pH p..
The updated Combo Pen P110 Pro features a modern and robust housing. The improved software now ensures quicker readings of accurate measurements. You can easily replace the electrode should it be worn or damaged.
The Combo Pen P110 Pro is ideal for measuring the EC, pH and temperature of liquid plant nutrition and water in swimming pools, Jacuzzis and ponds. The user-friendly buttons can be used to effortlessly switch between..
The updated Combo Pen P160 Pro features a modern and robust housing. The major advantage of this model is its analogue EC calibration. This means that the calibration solution does not need to have a temperature of exactly 25ºC.
Calibration takes place without any deviations. EC calibration solutions are extremely sensitive to temperature. However, this does not apply to pH. You can easily replace the electrode should it be worn or dam..
Grow Gadgets Thermometer Waterproof Probe is designed to give fast and accurate temperature readings in damp conditions.
Designed for Easy Reading
At the push of a button, Grow Gadgets Thermometer will display the highest and lowest values recorded since the unit was last reset, on its large LCD, designed for easy reading. This high-quality tool can also display in both F or C, purely for the grower’s convenience - it is so simple to use!
Features
La..
A digital controller designed to enhance your AC Infinity fan with smart controls to maintain a stable climate. This intelligent command unit features a black powder-coated body and a backlit LCD screen that presents a sleek aesthetic. The display has three brightness levels, as well as two auto brightness settings, and reads temperatures in Fahrenheit or Celsius. It includes a 12-foot sensor probe with a waterproof thermalloy head that accurately detects ..
Quick to setup and simple to use, this monitor was designed with hydroponics, aquaponics, and greenhouses in mind.
Make your nutrient solution easy to manage with the Groline monitor and combined pH/EC/temperature probe.
Instantly view all measurements
The versatile display of the Groline monitor allows for three screen modes. The LCD can display all three essential hydroponic nutrients measurements at one time, a 3-second cycle of single measurements, ..
Designed for agricultural professionals, this meter joins the Hanna 98 series of quality pH meters which are rugged and portable with the performance and features of a benchtop. It is also an addition to the GroLine range.
Application importance
The measurement of pH in agricultural activities is very important due to the influence it has on the growth of the plant. Soil can be acid, neutral or alkaline according to its pH value. Most plants prefer a pH ..
The pocket sized PRIMO3 tester provides a fast and dependable way to measure the total dissolved solids in water samples.
The PRIMO3 is ideally suited to the rigorous demands of water quality professionals who will appreciate the practicality of the clear, easy to read LCD for demonstrating the before and after results of conditioning and filtration systems.
Temperature is compensated automatically to ensure the readings are consistent to the standard or..
The HI-8314 is a handheld pH/mV/°C meter designed to be reliable and easy-to-use. The HI-8314N is also supplied with the HI-1217D pre-amplified pH electrode and internal temperature sensor.
Manual calibration is performed at one or two points by adjusting the trimmers on the front panel. This instrument is ideal for applications that require a custom calibration point. Manual calibration can be extremely useful in order to achieve better accuracy.
..
The HI-99121 portable pH meter, together with HI-12923 pH electrode, is designed to measure pH in soil or soil slurries.
The HI-99121 is a lightweight, portable pH and temperature meter. It features a two button operation system and is simple to use. It has a waterproof and compact casing, large dual-line display, and automatic pH calibration at one or two points.
Main features
Simultaneous pH and temperature measurements on a large dual-line..
The DiST's ease of use, in combination with its affordability, makes it the must-have equipment for EC and TDS measurement. PPM.
With an impressive range of features, the HI-98311 pocket tester is unmatched in the marketplace for EC/TDS and temperature measurement.
Designed for ease of use with a floating, waterproof case and offer the following features:
Measurement of conductivity (EC) and total dissolved solids (TDS) Automatic calibration and tempera..
The new and improved HI-99301. With it's larger user friendly LCD, tutorial messages for calibration and setup, missing probe indicator, newer rugged ergonomic casing, faster and easier battery replacement and probe situated on the bottom of the instrument for ease ot use, the updated model is much more effiecent.
The HI-99301 is a portable, EC/TDS/temperature meter that measures high range conductivity in mS/cm and TDS in ppt. Both instruments are housed..
The HI-991300 is a light weight, portable pH, conductivity and temperature meter for portable applications requiring both a pH and conductivity measurement. Applications include measurements for greenhouses irrigation, hydroponics and groundwater monitoring from agriculture nutrient pollution.
The HI-991300 meter features two operation button and is simple to use. All operations and settings, including calibration buffers and temperature scale selections,..
Probe for pH/pH+ORP/ISE, DO, EC, temperature with HI-7698295 short protective shield and 10m cable.
The use of Hanna’s microprocessor-based multiparameter intelligent probes with HI-9829 will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and manmade pollution to effectively evaluate applications for waste discharge permits, remediate contami..
The HI-7629829 is a multi-parameter pH/ISE/EC/DO/Turbidity/Temperature autonomously logging probe for use with the HI-9829 portable meter. Sensors are automatically recognised by the probe and meter when connected.
Logging probe for pH/ISE/EC/DO/Turbidity/Temperature with HI-7698295 short protective shield and 4m cable.
For use with the HI 9829 multiparameter.
Sensor replacement is quick and easy with field replaceable, screw type connectors colour-code..
Probe for pH/pH+ORP/ISE, DO, EC, temperature with HI-7698295 Short Protective Shield and 4m cable.
The use of Hanna’s microprocessor-based multiparameter intelligent probes with HI-9829 will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and manmade pollution to effectively evaluate applications for waste discharge permits, remediate contamin..
This meter features a large LCD which displays either pH, EC, TDS or temperature readings along with tutorial instructions. The pH readings are displayed with a 0.1 resolution and an accuracy of ±0.1 pH while the EC and TDS readings are displayed with a 0.01 mS/cm and 1ppm (mg/L) resolution and 2% full scale accuracy.
The EC range of both meters is from 0.00 to 4.00 mS/cm and TDS is from 0 to 1999ppm.
The temperature correction coefficient (β) is fixed a..