Search
Search
Product Compare (0)
Clima Control Basic
Controlling your indoor climate with the TechGrow Clima Control Basic is a breeze. Setting the Clima Control Basic is a snap with its handy rotary buttons. Its simple appearance is misleading as the Clima Control Basic is packed with the reliable and advanced TechGrow technology you are used to. This controller comes with a pre-mounted temperature probe on a 4.5 meter (15ft) cable. Available in 7A and 14A versions. Features: Plug & Play. Adjust..
£260.95
Ex Tax:
Clima Control Basic Plus 7A & 14A
Controlling your indoor climate with the TechGrow Clima Control Basic Plus is simple but effective. Setting the Clima Control Basic Plus is a snap with its handy rotary buttons. Its simple appearance is misleading as the Clima Control Basic Plus is packed with the reliable and advanced TechGrow technology you are used to. The bright green LED display shows the current temperature, and the set-point while adjusting. This controller comes with a pre-mount..
£290.95
Ex Tax:
Clima Control 7A & 14A
Control your indoor climate effectively with TechGrow’s Clima Control The Clima Control lets you connect two fans at the same time. It features the very clear, concise menu you are familiar with and which also allows you to read out min/max values on the display. Because of its simple menus and its handy Push & Turn Button, the Clima Control is easy to use by anyone and everyone. The unique calibration menu enables you to determine how much power is n..
£312.95
Ex Tax:
Clima Control Plus 7A & 14A
Effectively control your indoor climate with TechGrow’s Clima Control Plus – both day and night. This Plus version offers all the functions the Clima Control offers, augmented with seperate day- and night temperature settings, extra functionality for controlling a heater and an over-temperature contact. In addition, this controller has an adjustable delay time before it switches from day to night mode to prevent the fan from rotating unnessecarily fast. B..
£379.95
Ex Tax:
Day/Night Fan Controller 7A & 14A
Take control of the ventilation in your growing area The Day/Night Fan Controller is simple but highly effective. It allows you to operate the fan at different speeds, e.g. at 20% during the day and 60% during the night – or the other way round! The built-in light sensor lets the Day/Night Fan Controller switch from day to night mode automatically. Set the desired fan speed with the two rotary buttons. Features: 100% Plug & Play. Very eas..
£258.95
Ex Tax:
T-Mini Pro CO2 Controller
Compact design with built-in CO2 and light sensors This completely redesigned controller is now easier to use and compatible with many other TechGrow products. The T-Mini Pro measures, controls and displays the CO2 value and registers min/max values. It come with a built-in light sensor to automatically switch between day and night modes. There is no CO2 dispensing during the night. Features: Adjustable from 300 to 2000 ppm. Built-in calibration func..
£944.95
Ex Tax:
T-1 Pro CO2 Controller
This completely redesigned controller is just as easy to use as the other TechGrow Devices with which it is compatible. The TechGrow T-1 Pro measures and controls the CO2 value in an area. It automatically switches between day and night modes by means of the external sensor. The T-1 Pro is a digitally controlled device which measures and regulates the CO2 value in a room. It is designed with a modern digital display on which you can easily read out the CO..
£360.95
Ex Tax:
T-2 Pro CO2 Controller
The T-2 Pro is an unparalleled device that controls the CO2 value, temperature and humidity in your growing area. Because of this unique combination you can dose your CO2during the day, while letting your fan extract excess CO2and moisture produced by your plants during the night. The T-2 increases ventilation at high temperatures, but this can be overruled by setting the temperature set-point (very) high. This completely redesigned controller is compatib..
£419.95
Ex Tax:
Seconds Interval Timer
The TechGrow Seconds Interval Timer lets you set intervals with a high accuracy, e.g. for controlling a water pump. Easily set the timer to 2 minutes on and 100 minutes off with two simple twists of the buttons. The timer also comes equipped with a built-in light sensor to optionally disable the output when the lights are off. When the lights come back on, the program restarts automatically. Special features: Plug & Play, placeable on small t..
£187.95
Ex Tax:
TechGrow Humi Twin
Compact and highly accurate humidity controller. Create the perfect indoor climate with the handy Humi Twin Humidity controller. With the Humi Twin it becomes possible to easily switch between humidify/dehumidify the air in a room. The Humi Twin is easy to install and adjustable from 10% to 90% relative humidity. With the indicator-led you can always check if the Humi Twin is activated or not. Setpoint and hysteresis will be preserved during power outage..
£66.95
Ex Tax:
TechGrow Humidity Controller Humi Dual Pro
Create the perfect humidity in your growing area with the Humi Dual Pro. The Humi Dual Pro lets you switch between your humidifier and dehumidifier without changing power plugs. With its high-quality sensors, the Humi Dual Pro provides an optimal climate in your growing area. Compatible with many TechGrow devices. Features: Adjustable between 10% – 90% relative humidity. Switches the humidifier and dehumidifier both on and off. Switch..
£66.95
Ex Tax:
TechGrow Datalogger DL-1
Check past sensor values with this TechGrow Data Logger. The supplied 8GB SD card stores up to 180 million measurements for easy analyzing in the comfort of your home. The TechGrow Data logger is compatible with almost all TechGrow products. Special features: Logs CO2, temperature, relative humidity and light Measurement interval adjustable from 5 seconds to 5 minutes. All measurements are stored on a SD-card. The data is displayed..
£216.95
Ex Tax:
HS-1 Portable CO2 Meter
Compact and extremely accurate portable handmeter. The HS-1 CO2 Meter is ideal to measure the CO2 value and temperature in a room. The HS-1 CO2 Meter also features a simple calibration function and a clear audible alarm that gives a warning when the set alarm value is reached. The HS-1 takes a measurement every second. Thanks to the backlight of the LCD display it is possible to measure the CO2-value and temperature in low-light condition. Special featu..
£435.95
Ex Tax:
Portable CO2 Meter HS-2
The HS-2 is ideal to measure the CO2 value, temperature and humidity in an area. The TechGrow HS-2 Portable CO2 Meter uses NDIR (Non-Dispersive Infra Red) technology to ensure reliable measurements, similar to the CO2 sensor that TechGrow uses for years for all monitoring- and controlling instruments. The HS-2 features a clear audible alarm that warns when the CO2 value exceeds the set alarm value. Also, the HS-2 features a calibration function to calibr..
£580.95
Ex Tax:
TechGrow Temperature Probe
This sensor measures temperature, humidity (RH) and detects light simultaneously. These values are shown on the display of your controller. The Temp/RH sensor can be connected to various devices. Depending on your TechGrow controller, the sensor will control temperature and/or humidity. The built-in light sensor can be switched off when using a S-2 sensor or a T-Mini CO2 controller...
£22.95
Ex Tax:
TechGrow Temp/RH Sensor
This sensor measures temperature, humidity (RH) and detects light simultaneously. These values are shown on the display of your controller. The Temp/RH sensor can be connected to various devices. Depending on your TechGrow controller, the sensor will control temperature and/or humidity. The built-in light sensor can be switched off when using a S-2 sensor or a T-Mini CO2 controller...
£99.95
Ex Tax:
TechGrow S-2 Sensor
This sensor measures CO2 and detects light. The S-2 is compatible with all TechGrow controllers. The sensor is equipped with a built-in calibration function so you can calibrate the CO2 sensor against outdoor air. The calibration menu is only accesible through a CO2 controller. Also equipped with a built-in switch to prevent unwanted calibration...
£360.95
Ex Tax:
TechGrow S-4 Sensor
This all-in-one sensor measures CO2, temperature, humidity and detects light simultaneously. Also, the sensor is equipped with a built-in calibration function to calibrate the CO2 sensor against outdoor air. The calibration menu is only accesible through a CO2 controller. Also equipped with a built-in switch to prevent unwanted calibration...
£419.95
Ex Tax:
BL-7917-2 ORP Controller and Pump
ORP controller and dosing pumps in one compact unit. ±5 mV accuracy with unbeatable performance. Isolated 4 to 20 mA recorder output. Proportional dosing slows the pump down when the measured ORP level approaches the set value which avoids over dosage of oxidizing or reducing agents. Alarm contact is activated whenever the ORP reading varies more than 200 mV from the set point. Auxiliary contacts allow the user to attach a mixer or priming pump that i..
£957.95
Ex Tax:
Techgrow Ballact Connect 6 x 600W with Thermal Protection
The Ballast Connect is a digitally controlled relay controller that controls up to 6 x 600W. Each outlet is individually controlled by hybrid relays: during the switching moment the hybrid relay will switch on every 5 seconds. Thanks to the digital control and the 6 relays, the Ballast Connect has a lot to offer! It has temperature protection, start-up delay, an ammeter, a 24-hour timer, an asymmetrical timer and even a log book function that allows you t..
£435.95
Ex Tax:
Techgrow Ballast Connect Micro 2 x 600W
TechGrow’s Ballast Connect Micro is a digitally controlled relay controller that can switch up to 2 x 600W. Each outlet is individually switched by hybrid relays. Thanks to the digital control and the 2 relays, this controller has a lot to offer. For example, the Ballast Connect Micro has temperature protection and the relays switch on every 5 seconds during switching time. This controller comes without Temp Probe. Features: Suitable for 2 x 600W lig..
£246.95
Ex Tax:
Techgrow Ballast Basic 6x600W
The Ballast Basic is a digitally controlled relay controller that controls up to 6 x 600W. Thanks to the digital control, this relay controller has quite a few features! For example, it has a digital display and a digital time clock, which is easy to operate. During the clock setting process you can choose between a 24-hour cycle or an asymmetrical cycle. In case of the asymmetric timer, you can set your own preferences for the duration of the cycle.(maxi..
£237.95
Ex Tax:
Techgrow Ballast Basic 5x600W + Heater
The Ballast Basic is a digitally controlled relay controller that can switch 5x600W + Heater. Thanks to the digital control, this relay controller has great features. For example, it has a digital display and a digital time clock, which is easy to operate. During the clock setting process you can choose between a 24-hour cycle or an asymmetrical cycle. In case of the asymmetric timer, you can set your own preferences for the duration of the cycle (maximum..
£246.95
Ex Tax:
Techgrow Ballast Basic 4x600W
The Ballast Basic is a digitally controlled relay controller that can switch 4x600W. Thanks to the digital control, this relay controller has great features. For example, it has a digital display and a digital time clock, which is easy to operate. During the clock setting process you can choose between a 24-hour cycle or an asymmetrical cycle. In case of the asymmetric timer, you can set your own preferences for the duration of the cycle (maximum 36 hours..
£218.95
Ex Tax:
Techgrow Ballast Basic Micro 1x600W
The Ballast Basic Micro is a digitally controlled relay controller that can switch 1 x 600W. This controller has a digital timer and a clear display. In addition, the Ballast Basic Micro is easily adjustable. Features: Suitable for 1 x 600W lighting Digital display Does not make any noise Adjustable start-up delay up to 300min..
£204.95
Ex Tax:
