The New Jet range of pumps comes with a perfectly balanced impeller assembly with an anti-noise device. This makes the New Jet range powerful, noiseless and long-lasting. Noise is also removed due to the pump not vibrating when in operation which normally creates irritating buzzing noises.
The New Jet range is a completely water tight pump suitable both for submersed and external use. The New Jet pumps can be connected to any stiff or flexible tubes on bo..
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 63 x 73 x 83 mm..
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 90 x 73 x 110 mm..
With the choice of stainless steel or plastic casing the SW range is strike resistant and anti corrosion even when used in salt water. High quality resin on the windings ensures long life and that the unit is safe from electricity leakage.
For applications that require the pump to start and stop automatically the SW7000F is supplied complete with float switch.
Maximum head: 4.2m
Maximum lift: 4.2m
Power consumption: 150W..
These are high quality silent running submersible pumps with the intake allowing for very low water levels. They are all adjustable, for fine tuning the flow rates for Hydroponic Systems. They are ideal for both clean
and dirty water and are capable of handling solids up to 30 mm in diameter. Manufactured from tough, non-corrosive & rust proof materials the pumps have a long-life ceramic shaft for reliability and are fitted with an auto start/stop floa..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 4800 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 7150 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 10850 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 14200 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 17800 l/hr
Dimensions: 375x 365x 242mm..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 200w
Delivery rate max: 3600l/h
Delivery height max: 5m
Immersion depth max: 5m
Water temperature max: 35 degree C..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 250w
Delivery rate max: 5000l/h
Delivery height max: 6m
Immersion depth max: 5m
Water temperature max: 35 degree Ccomes with 13mm-25mm pipe adapter ..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 400w
Delivery rate max: 7000l/h
Delivery height max: 8m
Immersion depth max: 8m
Water temperature max: 35 degree C..
This multi-stage 4 impeller pump can pump up to a massive 45 metres head.
Flow rate up to 101 L/min
Maximum head (lift height) 45M
Made from tough, non-corrosive & rust proof materials
Longlife ceramic shaft for reliability
Stainless Steel filter
Includes built in non-return valve and multi hose adaptor
1100 Watts, 230v 1ph motor..
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
This accessory incorporates a mounting fixture at the end of a 40 inch (102 cm) segmented fiberglass wand and is well-suited for fresh and saltwater use. The wand unscrews into three sections for easier storage and transport. All radiation sensors are compatible with the wand, which allows the user to place the sensor in hard to reach areas such as in aquarium tanks and greenhouses...
Ideal for irrigation systems in hydroponics and gardens. It impresses with a pumping capacity of 3,500 l/h and a head of 5.5 m. The pump is suitable for deep water tanks or rain barrels. It is flexible thanks to multi-connection pieces (19 mm, 25 mm, 1" AG), powerful with 200 watts, handy, and lightweight (2.8 kg).
Suitable for the UK market (230 V / 50 Hz). plug adapter included...
The RP 7000 MAN Submersible Pump is powerful and reliable for your plant irrigation. With 7000 l/h, 7.5 m head, and 400 watts, it is suitable for versatile applications. The flexible multi-hose connection and reliability make it the ideal choice...
The RP 12000 MAN Submersible Pump from RP Pump is a powerful and reliable solution for irrigating your plants. With 12000 l/h flow rate, 9 m head, and 550 watts of power, it is ideal for various applications, from drip irrigation to hydroponics. The pump has a multi-hose connection for flexibility and comes without a float switch...
The New Jet range of pumps comes with a perfectly balanced impeller assembly with an anti-noise device. This makes the New Jet range powerful, noiseless and long-lasting. Noise is also removed due to the pump not vibrating when in operation which normally creates irritating buzzing noises.
The New Jet range is a completely water tight pump suitable both for submersed and external use. The New Jet pumps can be connected to any stiff or flexible tubes on bo..
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 63 x 73 x 83 mm..
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 90 x 73 x 110 mm..
With the choice of stainless steel or plastic casing the SW range is strike resistant and anti corrosion even when used in salt water. High quality resin on the windings ensures long life and that the unit is safe from electricity leakage.
For applications that require the pump to start and stop automatically the SW7000F is supplied complete with float switch.
Maximum head: 4.2m
Maximum lift: 4.2m
Power consumption: 150W..
These are high quality silent running submersible pumps with the intake allowing for very low water levels. They are all adjustable, for fine tuning the flow rates for Hydroponic Systems. They are ideal for both clean
and dirty water and are capable of handling solids up to 30 mm in diameter. Manufactured from tough, non-corrosive & rust proof materials the pumps have a long-life ceramic shaft for reliability and are fitted with an auto start/stop floa..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 4800 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 7150 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 10850 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 14200 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 17800 l/hr
Dimensions: 375x 365x 242mm..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 200w
Delivery rate max: 3600l/h
Delivery height max: 5m
Immersion depth max: 5m
Water temperature max: 35 degree C..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 250w
Delivery rate max: 5000l/h
Delivery height max: 6m
Immersion depth max: 5m
Water temperature max: 35 degree Ccomes with 13mm-25mm pipe adapter ..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 400w
Delivery rate max: 7000l/h
Delivery height max: 8m
Immersion depth max: 8m
Water temperature max: 35 degree C..
This multi-stage 4 impeller pump can pump up to a massive 45 metres head.
Flow rate up to 101 L/min
Maximum head (lift height) 45M
Made from tough, non-corrosive & rust proof materials
Longlife ceramic shaft for reliability
Stainless Steel filter
Includes built in non-return valve and multi hose adaptor
1100 Watts, 230v 1ph motor..
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
This accessory incorporates a mounting fixture at the end of a 40 inch (102 cm) segmented fiberglass wand and is well-suited for fresh and saltwater use. The wand unscrews into three sections for easier storage and transport. All radiation sensors are compatible with the wand, which allows the user to place the sensor in hard to reach areas such as in aquarium tanks and greenhouses...
Ideal for irrigation systems in hydroponics and gardens. It impresses with a pumping capacity of 3,500 l/h and a head of 5.5 m. The pump is suitable for deep water tanks or rain barrels. It is flexible thanks to multi-connection pieces (19 mm, 25 mm, 1" AG), powerful with 200 watts, handy, and lightweight (2.8 kg).
Suitable for the UK market (230 V / 50 Hz). plug adapter included...
The RP 7000 MAN Submersible Pump is powerful and reliable for your plant irrigation. With 7000 l/h, 7.5 m head, and 400 watts, it is suitable for versatile applications. The flexible multi-hose connection and reliability make it the ideal choice...
The RP 12000 MAN Submersible Pump from RP Pump is a powerful and reliable solution for irrigating your plants. With 12000 l/h flow rate, 9 m head, and 550 watts of power, it is ideal for various applications, from drip irrigation to hydroponics. The pump has a multi-hose connection for flexibility and comes without a float switch...