The New Jet range of pumps comes with a perfectly balanced impeller assembly with an anti-noise device. This makes the New Jet range powerful, noiseless and long-lasting. Noise is also removed due to the pump not vibrating when in operation which normally creates irritating buzzing noises.
The New Jet range is a completely water tight pump suitable both for submersed and external use. The New Jet pumps can be connected to any stiff or flexible tubes on bo..
The BioWave Subsonic Harmonic Wave Machine creates a subsonic harmonic wave that improves plant respiration, increasing plant yields by an average of 20% and total dissolved solids by a whopping 55%! This revolutionary, patent-pending machine enhances plant metabolism, photosynthesis and health so your hydroponic plants grow more rapidly, resist diseases better, and produce larger yields.
This unit attaches to ceiling with ratchet pulleys or has legs th..
The BioWave Subsonic Harmonic Wave Machine creates a subsonic harmonic wave that improves plant respiration, increasing plant yields by an average of 20% and total dissolved solids by a whopping 55%! This revolutionary, patent-pending machine enhances plant metabolism, photosynthesis and health so your hydroponic plants grow more rapidly, resist diseases better, and produce larger yields. The 9200 unit is specifically designed for indoor plants.
It is plu..
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 63 x 73 x 83 mm..
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 90 x 73 x 110 mm..
With the choice of stainless steel or plastic casing the SW range is strike resistant and anti corrosion even when used in salt water. High quality resin on the windings ensures long life and that the unit is safe from electricity leakage.
For applications that require the pump to start and stop automatically the SW7000F is supplied complete with float switch.
Maximum head: 4.2m
Maximum lift: 4.2m
Power consumption: 150W..
These are high quality silent running submersible pumps with the intake allowing for very low water levels. They are all adjustable, for fine tuning the flow rates for Hydroponic Systems. They are ideal for both clean
and dirty water and are capable of handling solids up to 30 mm in diameter. Manufactured from tough, non-corrosive & rust proof materials the pumps have a long-life ceramic shaft for reliability and are fitted with an auto start/stop floa..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 4800 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 7150 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 10850 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 14200 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 17800 l/hr
Dimensions: 375x 365x 242mm..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 200w
Delivery rate max: 3600l/h
Delivery height max: 5m
Immersion depth max: 5m
Water temperature max: 35 degree C..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 250w
Delivery rate max: 5000l/h
Delivery height max: 6m
Immersion depth max: 5m
Water temperature max: 35 degree Ccomes with 13mm-25mm pipe adapter ..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 400w
Delivery rate max: 7000l/h
Delivery height max: 8m
Immersion depth max: 8m
Water temperature max: 35 degree C..
A light and airy mix, B’Cuzz coco offers an open structure that promotes rapid root development.
Atami use high quality coco substrate that is washed and steamed to ensure that it is free from salt and pathogens and carries RHP certification.
B’Cuzz coco is unique in that it contains a light fertiliser for accelerated growth in the first week and is also buffered to allow the grower optimum control over pH.
Suitable for seeds and cuttings...
This multi-stage 4 impeller pump can pump up to a massive 45 metres head.
Flow rate up to 101 L/min
Maximum head (lift height) 45M
Made from tough, non-corrosive & rust proof materials
Longlife ceramic shaft for reliability
Stainless Steel filter
Includes built in non-return valve and multi hose adaptor
1100 Watts, 230v 1ph motor..
Tribus - Micro Organisms, MACRO Yields®
Tribus® Original is a highly concentrated blend of three growth-promoting rhizobacteria that can be used with organic or conventional growing pactices to increase crop quality and quantity from seedling through harvest in any type of cultivation system.
These bacteria work symbiotically with the plant by producing enzymes and other biochemicals that maximize nutrient availability and uptake, improving root and stem..
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
The updated Soil/Substrate meter S300 Pro 2 features a modern and robust housing. This digital soil pH/temperature meter can be used to measure the pH and temperature of coconut soil and other moist, soft substrates or liquids.
The user-friendly buttons ensure that the meter is extremely easy to operate. The meter is delivered fully calibrated and includes batteries.
How does the meter work?
Connect the BNC connector of..
This accessory incorporates a mounting fixture at the end of a 40 inch (102 cm) segmented fiberglass wand and is well-suited for fresh and saltwater use. The wand unscrews into three sections for easier storage and transport. All radiation sensors are compatible with the wand, which allows the user to place the sensor in hard to reach areas such as in aquarium tanks and greenhouses...
A fully integrated digital TDR soil moisture sensor from the Soil Smart series. Works well in various soil types and soilless media. Sized with 10 cm waveguide rods to fit well with rockwool cubes.
Features
SDI-12 Interface
3-element 10 cm stainless steel waveguide
5 m 3-conductor waterproof cable (standard)
Waterproof Epoxy-filled Housing
20% to 80% Incident Wave Rise Time: 300 ps
Waveform Digitizing Resolution: 5 ps
Incident Wave Amplitude:&nbs..
The E300 Pro is the ideal meter to
measure the EC and temperature of coconut soil and other moist, soft
substrates and liquids. The E300 Pro features a modern and robust
housing, with easy to operate buttons. It also includes an EC electrode
of unprecedented quality. The meter is delivered fully calibrated and
includes batteries.How does the meter work?Connect the PIN connector of the electrode to the EC meter.Rinse the electrode with running wat..
Ideal for irrigation systems in hydroponics and gardens. It impresses with a pumping capacity of 3,500 l/h and a head of 5.5 m. The pump is suitable for deep water tanks or rain barrels. It is flexible thanks to multi-connection pieces (19 mm, 25 mm, 1" AG), powerful with 200 watts, handy, and lightweight (2.8 kg).
Suitable for the UK market (230 V / 50 Hz). plug adapter included...
The RP 7000 MAN Submersible Pump is powerful and reliable for your plant irrigation. With 7000 l/h, 7.5 m head, and 400 watts, it is suitable for versatile applications. The flexible multi-hose connection and reliability make it the ideal choice...
The RP 12000 MAN Submersible Pump from RP Pump is a powerful and reliable solution for irrigating your plants. With 12000 l/h flow rate, 9 m head, and 550 watts of power, it is ideal for various applications, from drip irrigation to hydroponics. The pump has a multi-hose connection for flexibility and comes without a float switch...
The New Jet range of pumps comes with a perfectly balanced impeller assembly with an anti-noise device. This makes the New Jet range powerful, noiseless and long-lasting. Noise is also removed due to the pump not vibrating when in operation which normally creates irritating buzzing noises.
The New Jet range is a completely water tight pump suitable both for submersed and external use. The New Jet pumps can be connected to any stiff or flexible tubes on bo..
The BioWave Subsonic Harmonic Wave Machine creates a subsonic harmonic wave that improves plant respiration, increasing plant yields by an average of 20% and total dissolved solids by a whopping 55%! This revolutionary, patent-pending machine enhances plant metabolism, photosynthesis and health so your hydroponic plants grow more rapidly, resist diseases better, and produce larger yields.
This unit attaches to ceiling with ratchet pulleys or has legs th..
The BioWave Subsonic Harmonic Wave Machine creates a subsonic harmonic wave that improves plant respiration, increasing plant yields by an average of 20% and total dissolved solids by a whopping 55%! This revolutionary, patent-pending machine enhances plant metabolism, photosynthesis and health so your hydroponic plants grow more rapidly, resist diseases better, and produce larger yields. The 9200 unit is specifically designed for indoor plants.
It is plu..
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 63 x 73 x 83 mm..
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 90 x 73 x 110 mm..
With the choice of stainless steel or plastic casing the SW range is strike resistant and anti corrosion even when used in salt water. High quality resin on the windings ensures long life and that the unit is safe from electricity leakage.
For applications that require the pump to start and stop automatically the SW7000F is supplied complete with float switch.
Maximum head: 4.2m
Maximum lift: 4.2m
Power consumption: 150W..
These are high quality silent running submersible pumps with the intake allowing for very low water levels. They are all adjustable, for fine tuning the flow rates for Hydroponic Systems. They are ideal for both clean
and dirty water and are capable of handling solids up to 30 mm in diameter. Manufactured from tough, non-corrosive & rust proof materials the pumps have a long-life ceramic shaft for reliability and are fitted with an auto start/stop floa..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 4800 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 7150 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 10850 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 14200 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 17800 l/hr
Dimensions: 375x 365x 242mm..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 200w
Delivery rate max: 3600l/h
Delivery height max: 5m
Immersion depth max: 5m
Water temperature max: 35 degree C..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 250w
Delivery rate max: 5000l/h
Delivery height max: 6m
Immersion depth max: 5m
Water temperature max: 35 degree Ccomes with 13mm-25mm pipe adapter ..
The Aquaking is a multipurpose, high performance, low power consumption submersible pump and is designed for the circulation of water with a maximum temperature of 35°C.
Power supply: 230V – 50Hz
Power consumption: 400w
Delivery rate max: 7000l/h
Delivery height max: 8m
Immersion depth max: 8m
Water temperature max: 35 degree C..
A light and airy mix, B’Cuzz coco offers an open structure that promotes rapid root development.
Atami use high quality coco substrate that is washed and steamed to ensure that it is free from salt and pathogens and carries RHP certification.
B’Cuzz coco is unique in that it contains a light fertiliser for accelerated growth in the first week and is also buffered to allow the grower optimum control over pH.
Suitable for seeds and cuttings...
This multi-stage 4 impeller pump can pump up to a massive 45 metres head.
Flow rate up to 101 L/min
Maximum head (lift height) 45M
Made from tough, non-corrosive & rust proof materials
Longlife ceramic shaft for reliability
Stainless Steel filter
Includes built in non-return valve and multi hose adaptor
1100 Watts, 230v 1ph motor..
Tribus - Micro Organisms, MACRO Yields®
Tribus® Original is a highly concentrated blend of three growth-promoting rhizobacteria that can be used with organic or conventional growing pactices to increase crop quality and quantity from seedling through harvest in any type of cultivation system.
These bacteria work symbiotically with the plant by producing enzymes and other biochemicals that maximize nutrient availability and uptake, improving root and stem..
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
Aqualine Submersible Pumps are a vital part in most types of hydroponic grow system where they are used to deliver the nutrient solution to the plants...
The updated Soil/Substrate meter S300 Pro 2 features a modern and robust housing. This digital soil pH/temperature meter can be used to measure the pH and temperature of coconut soil and other moist, soft substrates or liquids.
The user-friendly buttons ensure that the meter is extremely easy to operate. The meter is delivered fully calibrated and includes batteries.
How does the meter work?
Connect the BNC connector of..
This accessory incorporates a mounting fixture at the end of a 40 inch (102 cm) segmented fiberglass wand and is well-suited for fresh and saltwater use. The wand unscrews into three sections for easier storage and transport. All radiation sensors are compatible with the wand, which allows the user to place the sensor in hard to reach areas such as in aquarium tanks and greenhouses...
A fully integrated digital TDR soil moisture sensor from the Soil Smart series. Works well in various soil types and soilless media. Sized with 10 cm waveguide rods to fit well with rockwool cubes.
Features
SDI-12 Interface
3-element 10 cm stainless steel waveguide
5 m 3-conductor waterproof cable (standard)
Waterproof Epoxy-filled Housing
20% to 80% Incident Wave Rise Time: 300 ps
Waveform Digitizing Resolution: 5 ps
Incident Wave Amplitude:&nbs..
The E300 Pro is the ideal meter to
measure the EC and temperature of coconut soil and other moist, soft
substrates and liquids. The E300 Pro features a modern and robust
housing, with easy to operate buttons. It also includes an EC electrode
of unprecedented quality. The meter is delivered fully calibrated and
includes batteries.How does the meter work?Connect the PIN connector of the electrode to the EC meter.Rinse the electrode with running wat..
Ideal for irrigation systems in hydroponics and gardens. It impresses with a pumping capacity of 3,500 l/h and a head of 5.5 m. The pump is suitable for deep water tanks or rain barrels. It is flexible thanks to multi-connection pieces (19 mm, 25 mm, 1" AG), powerful with 200 watts, handy, and lightweight (2.8 kg).
Suitable for the UK market (230 V / 50 Hz). plug adapter included...
The RP 7000 MAN Submersible Pump is powerful and reliable for your plant irrigation. With 7000 l/h, 7.5 m head, and 400 watts, it is suitable for versatile applications. The flexible multi-hose connection and reliability make it the ideal choice...
The RP 12000 MAN Submersible Pump from RP Pump is a powerful and reliable solution for irrigating your plants. With 12000 l/h flow rate, 9 m head, and 550 watts of power, it is ideal for various applications, from drip irrigation to hydroponics. The pump has a multi-hose connection for flexibility and comes without a float switch...