Plastic case tube fans with built in thermostat and temperature controller. The fan has an idle speed to always maintain negative air pressure. It will then automatically adjust its speed through three higher speed settings to maintain the desired temperature.
The control system is integrated into the unit and completely wired. Speed control is done by winding taps, so there is no extra noise caused by a controller.
Features:
Backward curved c..
The Rhino Fan series is designed to be used with the other members of the Rhino product range. The durable casing is manufactured from reinforced plastic and on particular models steel, to give the fan a very strong outer casing that prevents leaks.
The fans are easily installed and removed and come with an easy to fit mounting clamp.
Rhino Fans come hard wired and are ready to be used from removal from the box.
• Speed-controllable
• Can be inst..
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECREASE humidity indepen..
The Active Circulation System - available to control both AquaFarm and WaterFarm systems. A series of either type of module can be connected together with the controller supplying water and nutrients to all the modules.
45 litres..
Lighting control at your fingertips
Using a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram), set the dials on the fixtures to EXT (External control), plug the controller and the fixtures directly into mains and you are set to go.
The controller can switch all the inte..
Lighting control at your fingertips
Using a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram), set the dials on the fixtures to EXT (External control), plug the controller and the fixtures directly into mains and you are set to go.
The controller can switch all the inter..
The Mini Grower is a complete controller for indoor growing systems with an artificial lighting. It defines the lighting interval for 9X600W lights, defines the watering interval by the GSE Water timer and regulates the climate by the GSE Temperature and negative pressure fan controller. All connections are wired to plugs with flap lid and can be controlled over a main switch integrate safety breaker 3x16A.
- Case: WxHxD = 200x430x95mm
- Connection 3 pole..
These fans have been designed to include an integral power cable and an integral thermostat - making it easy to ventilate your grow room.
Features:
- Integral thermostat
- Integral speed control
- Integral 4m power cable
- Wall mounting bracket
- Quality ‘Prima Klima’ brand
- Reducers available on request (max 2 per fan)..
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a standard daytime recycling t..
The Superpro DDAC-1 receives information from the sensors and activates external fans, air conditioners, dehumidifiers, heaters, and CO2 equipment as needed to maintain optimum levels for indoor agriculture. Until now, this simple idea was easier said than done.
A 15-amp / 120 or 10-amp / 240 vot circuit breaker and heavy-duty internal construction ensures that the unit will operate for years without fail. We only use high-quality UL / CE listed component..
The Maxi Controller can adjust the output according to the ambient temperature: the lamps are dimmed automatically when the temperature exceeds a maximum pre-defined level.
Using the DimLux with a Maxi Controller enables you to plug the DimLux directly into a wall socket without needing an intervening relay, time delay unit or time switch – which saves you costs.
A DimLux controlled by a Maxi Controller is the only (digital) ballast that does not need to..
An OptiClimate canopy temperature camera can be connected to the system to monitor evaporation from the crop: an excessive canopy temperature is indicative of problems with the plants' evaporation capacity (for example, due too little water or excessive light).
If the canopy temperature rises to an excessive level then the DimLux ballasts are dimmed or switched off until the temperature falls to an acceptable level: failure to lower an excessive canopy te..
The IntelliClimate is the ideal climate controller for all sizes of grow chamber. It controls temperature, humidity, lights and CO2 in a unified way to obtain the best possible growing climate. It does all this whilst minimising wastage of CO2 and electricity.
A standard feature of the IntelliClimate is the USB connection to a PC. This provides a new level of user friendliness and allows the gro..
The Harvest Master range of climate controllers make life easier and safer. They give you more control over pretty much every aspect of your grow room and as a result, you can expect to increase your yields.
CO2 EASi' Controller (with CO2 Sensing)
Operating the CO2 Easi is simple, the CO2 EASi is an intelligent control system that takes care of CO2 and at the same time is an intelligent Temperature Controller when the COOL KIT is attached.
Light ON peri..
With 8 Outputs the Harvest Master Climate Controller is capable of many things.
The Climate Controller from Harvest Master takes the guesswork out of growing your plants and turning them into a crop. With the Harvest Master Climate you simply plug the machine in and it automatically checks what you have connected and how it works.
You hardly need to open the manual. the system is capable of learning pretty much everything, and keep on lea..
With 8 Outputs the Harvest Master PRO Controller is comes with the same specification as the the Climate model, but includes the ability to monitor CO2, like the Climate, the PRO is capable of many things.
Climate 'Pro' Controller (with CO2 Sensing)
Do everything the 'Climate' Controller does AND monitor and control the feeding of CO2 to your plants for massive growth, massive cropping, fast.
Potency in your crop
Organics with flavour, power and prod..
The Harvest Master CLIMATE PLUS Controller will do everything the 'Climate' Controller does PLUS an 8 extra outputs to control up to 8 additional actions of your choice. That's a total of 16 RCA Control Points!
Just plug it in and it'll check what you have connected and how it works. You hardly need to open the manual. It'll learn about pretty much everything, and keep on learning about:
Atmosphere
Temperature
Humidity
Climate changes
.…minu..
The Climate 'PRO PLUS' 16-Output Controller with CO2 Sensing is the ultimate controller from Harvest Master, take full control of your grow room inc. CO2 and Light Systems
The PRO PLUS does the same as the 'Pro' Climate Controller but can also control other elements of your system. If you are an enthusiast or a professional that needs to do more, then you may need the Harvest Master PRO PLUS. Featuring 8 extra outputs for more actions (can be triggered by..
Harvest Master Quad and Tri Band Text Me GSM Modem
The Harvest Master GSM 'Text Me' Modem gives you instant text message updates, direct to your phone. Simply connect the Modem to any of the PLUS controllers and fully utilise the additional 8 in/outputs these controllers provide.
The Text Me GSM Modem will send 'status' updates, to get an update from your Harvest-Master controller from anywhere! You can trigger the updates by texting the unit with y..
The Variispeed Single Fan Speed Controller adjusts and controls the speed of your fans. This then ensures a long life for the fan motor. It has variable speed control along with full power or completely off and is suitable for up to 300w...
MK2 Version Now AvailableThe Fan Controller makes it simple to manually adjust the running speed of any type of extractor fan. The unit is compact, easy to use and there is no wiring necessary. Simply plug the Fan Controller into a power supply and plug your fan into the Fan Controller. Adjust the dial on the Fan Controller to regulate the running speed on the fan.
- MAX Load: 6.5A
- Plug and Play - No wiring necessary.
- Increased fan life span
- Mi..
This fan controller is for grow rooms where an extractor fan is being used to draw air out of the grow room but no fan is being used to draw air into the grow room (a passive inlet).
When you plug your extractor fan into the controller it will adjust the fan speed to provide constant air flow and maintain your chosen temperature.
Simply plug your extractor fan into the controller and lower the fan speed. Then set the temperature you wish your room to be. ..
Simply set your desired temperature and the minimum fan speed and the Smart Controller uses software to evaluate the correct fan speed to maintain the programmed temperature. This new technology ensures more accurate temperature control, smooth fan adjustment for less noise and longer fan life span.
Please note: The Smart Controller is available with the Temperature Sensor as a complete kit or available as seperate items...
The SPEED-B1 is designed to control a variable speed centrifugal fan up to 6-amps. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control the temperature within an area using a variable speed fan.
The user selects the temperature they would their area to be. At that temperature or above, the fan will be operated at full power to provide maximum cooling. Once the temperature drops 3°F b..
This unique product represents a real step forwards in automatic temperature control. Unlike other controllers that simply shunt fans from idle to full speed after temperature is exceeded, the Twin Controller automatically calculates the exact running speed for your fans to maintain the temperature you set. This new method provides more accurate temperature control, limits fan noise and guarantees negative pressure inside the room.
Simply plug in your fan..
This unique product represents a real step forwards in automatic temperature control. Unlike other controllers that simply shunt fans from idle to full speed after temperature is exceeded, the Twin Controller automatically calculates the exact running speed for your fans to maintain the temperature you set. This new method provides more accurate temperature control, limits fan noise and guarantees negative pressure inside the room.
Simply plug in your fan..
This unique product represents a real step forwards in automatic temperature control. Unlike other controllers that simply shunt fans from idle to full speed after temperature is exceeded, the Twin Controller automatically calculates the exact running speed for your fans to maintain the temperature you set. This new method provides more accurate temperature control, limits fan noise and guarantees negative pressure inside the room.
Simply plug in your fan..
The Twin Controller PRO works in exactly the same way as the original Twin Controller but has an additional programme added to its software to remove excess humidity from the growroom during the lights off cycle.
When the lights in the growroom switch off, the Twin Controller PRO will automatically switch to another programme that every hour, gently increases the fans speed for just long enough to remove excess humidity from the room. When the light..
The Twin Controller PRO works in exactly the same way as the original Twin Controller but has an additional programme added to its software to remove excess humidity from the growroom during the lights off cycle.
When the lights in the growroom switch off, the Twin Controller PRO will automatically switch to another programme that every hour, gently increases the fans speed for just long enough to remove excess humidity from the room. When the lights..
The Twin Controller PRO works in exactly the same way as the original Twin Controller but has an additional programme added to its software to remove excess humidity from the growroom during the lights off cycle.
When the lights in the growroom switch off, the Twin Controller PRO will automatically switch to another programme that every hour, gently increases the fans speed for just long enough to remove excess humidity from the room. When the lights..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature probe, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature probe, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature probe, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature probe, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The SPC is a twin fan controller that automatically adjusts the speed of inlet and exhaust extraction fans to maintain a set temperature. It is the perfect controller for mid to large sized grow rooms.
There is no need to adjust the speed of the fans yourself as The SPC will do this for you automatically.
The SPC gradually increases and decreases the fans speed in perfect synchronization so you will always have negative air pressure inside the room as wel..
The Prima Controller - combined fan speed controller and thermostat which controls exhaust and intake fans. This can be wired to fans, program your requirements and it will do the rest. The Prima Controller has three analogue dials:
one dial sets the best temperature for the controller to maintain
one dial sets the minimum airflow for the inlet fan
one dial sets the minimum airflow for the outlet fan
This ensures continuous air flow, regardless of t..
The minimum speed controller is a temperature depended speed controller for ventilated rooms with one or more fans. The minimum speed controller keeps the temperature constantly and impedes to run under the set minimum-speed. It can be easily controlled, adjusting the required temperature and the minimum speed on two knobs.
The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistan..
The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. It can be easily controlled, adjusting the required temperature, minimum speed and the pressure of your room on four knobs. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.
The control..
This digital temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one or more exhaust fans (up to 600 watt).
The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, ma..
This digital fan controller is a humidity and temperature dependent speed controller for rooms with intake and exhaust fans (2 x 600watt). The fan controller keeps the room humidity and temperature constant and under pressure to prevent odour from escaping.
A reliable fan controller complete with:
Sealed water resistant cover
Plugs with flap-lids and a low voltage sensor making it perfect for humid rooms.
Protection class IP44
Digital sensor supplie..
Adjustable temperature fan controller with underpressure control. Let Rhino do the work! The RC-1 enables growers to acurately control the air exchange, set desired temperature and maintain negative pressure in the grow room.
Intake and extraction fans will run at maximum speed to quickly establish desired temperature, once reached the fans will drop to a minimum idle speed ensuring the room is adequately ventilated and preventing air leaks.
How to use:..
The RAM AIR-PRO is an intelligent low noise hydroponic fan speed controller, designed to control an extractor and intake fan thermostatically. Automatically monitors and keeps desired room temperature and air pressure. Simple to use plug and play hydroponic fan speed controller, all you have to do is plug in the fans, set the required air temperature and fan speed/ balance and the AIR-PRO will do the rest.
Air-Pro twin fan speed controller is suitable for..
Temperature is one of the most important environmental factors in your grow room / glasshouse all plants have an optimum temperature at which they will grow at and a minimum and maximum temperature that they can survive therefore temperature is very important to the health & growth rate of all plants.
The Evolution digital temperature control System constantly monitors the temperature in the growing area and independently controls fans, heaters and hu..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
The OptiClimate is controlled by the standard included remote control. The extensive remote control is also a controller that runs all processes automatically and is easy to follow. After the remote has been set to the minimum temperature (night), maximum temperature (day), the Opticlimate will heat or cool depending on the day or night time...
The VAPOR-B1 is a humidity controller that can control either a dehumidifier or humidifier. Once the VAPOR-B1 is connected to a power source, and the humidification device is connected to the VAPOR-B1 power outlet, the device connected will be automatically controlled by the settings on the VAPOR-B1.
The user can choose to have different Day and Night humidity settings which will be automatically switched to the correct mode by the built-in photocell. The..
The THERM -B1 temperature controller is designed to activate a cooling or heating device. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control temperature between 7 to 35’C.
Activate a cooling heating device up to 15 amps
Separate Day and Night temperature settings
A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable me..
A new version is now available here: ROOT!T Heat Mat Thermostat.
ROOT!T’s electronic temperature controller is compatible with all heat mats and is an optional accessory for the ROOT!T Heat Mats.
The thermostat controls the temperature of heat mats evenly in colder or warmer than normal environments. It provides constant optimum temperatures for specific plants. It has an easy plug-in operation with an illuminated indicator.
Features:
Easy t..
Easy roll hangers make life easy when it comes to hanging your reflectors. Simply lift the reflector gently and it will automatically lock into place. Adjustable tension and a maxium load of 10kg per pair of easy roll hangers. Can also be used to hang adjustable mylar and other grow room equipment...
The CARBON -B1 is designed to cost-effectively control the CO2 level inside a growing area. An extremely accurate NDIR CO2 PPM sensor (part-per-million meter) is combined with a digital microprocessor to create an accurate and simple method to control supplemental CO2 use in a greenhouse. The unit can control CO2 levels up to 2500PPM. The user selects the desired CO2 level to be maintained.
A built-in photocell automatically activates the unit only during..
The GI professional CO2 monitor/controller combines the very latest technology with plug and play operation. We have added a photosensor to detect light and dark, this automaticaly changes the working mode of the controller. Other features include: fully adjustable between 0-2000ppm, wall mountable, extremely accurate external sensor with 3 meter cable & automatic calibration.
The GI controller can be used with CO2 generators, CO2 injection devices, s..
The Ultimate CO 2 Controller.
• Simple to use.
• Four separate modes of operation.
• Can be used with or without Analyser.
• Latest Microprocessor technology.
• Intelligent Multi Stage CO 2 dosing.
• Wall mountable.
• User friendly.
• Full 1 year warranty.
• Low Cost
Carbon Dioxide is one of the most important factors in an indoor growroom or glass house. Photosynthesis is the term used to describe the process by which plants combine CO 2 molecul..
A simple to use, innovative CO² sensor and controller, the Harvest Master CO² Easi Controller monitors the growing environment of your grow room – vital for healthy plant growth!
The operation of CO2 EASi.
CO2 EASi is intelligent control of CO2 and at the same time, an Intelligent Temperature controller when the COOL KIT is attached.
In Light ON periods (Day):
The controller will try to maintain Max co2 high PPM for the longest duration. It aggressively..
Temperature is one of the most important environmental factors in your grow room / glasshouse all plants have an optimum temperature at which they will grow at and a minimum and maximum temperature that they can survive therefore temperature is very important to the health & growth rate of all plants.
The Evolution digital temperature control System constantly monitors the temperature in the growing area and independently controls fans, heaters and hu..
The DV-14K is a timed relay box which you can use to switch a maximum of 4×600 Watt, or 5×400 watt luminaires on and off. The DV-14K also has a heater contact, which means the heater will come on when the lights go off, keeping a more consistent temperature in the grow room.
Dimensions: 210x290x90mm
Required voltage: 230 Vac/50Hz.
Max. output: 15 Amp
Output heater: 15 Amp
Isolation level: IP-44..
GSE Step Controllers allow accurate control of fans at low speed, without any low noise hum, which is often associated with fans running at low speeds.
The unit controls the fan speed based on the temperature of the grow room. The low voltage sensor is on a 4 metre long cable and the temperature and sensitivity are controlled independently. The controller has a water resistant cover and comes with a peace of mind 2 year warranty*...
GSE Step Controllers allow accurate control of fans at low speed, without any low noise hum, which is often associated with fans running at low speeds.
The unit controls the fan speed based on the temperature of the grow room. The low voltage sensor is on a 4 metre long cable and the temperature and sensitivity are controlled independently. The controller has a water resistant cover and comes with a peace of mind 2 year warranty*...
The PLANT!T Spreader Mat breaks the surface tension of water and nutrient and helps to wet the surface of all types of systems. Especially useful for NFT systems...
User friendly Co2 controllers and are very reliable. The Unis Co2 Controller is really simple to set up and use, you simply dial in the grow room size on your Unis Controller and connect up the regulator to your gas bottle. The easiest and most effective way to inject Co2 into your grow room. The beauty of this kit is that it has its own built in special Co2 timer, so all that you need to do is tell it the size of your grow room and it does the rest for yo..
iGROW: Power, Flexability & Control at Your Fingertips
The SUNMASTER iGROW controller is a device using Powerline communication technology to control SUNMASTER digital ballasts without additional wiring. SUNMASTER iGROW controller is equipped with functions to gain maximum control over a grow lighting with simple approach for connection and settings. Functions include basic switch ON and OFF times, dimming timer, dusk and dawn simulation for continuou..
The Imperium is a precision feed controller, which offer’s greater control over feeding duration and frequency to match each life-stage in a plants growth. Ideal as part of an irrigation system to water plants for the exact amount of time needed. It allows you to feed little and often which will produce maximum yields and allows the use of more oxygen rich media such as a 50;50 mix of Coco and Clay pebbles that would normally dry out without more regular f..
The Imperium Plus is a precision feed controller featuring an integrated Grasslin segmental timer that can be set to run from as little as 1 second up to 15 minutes, at the push of a button which offer’s greater control over feeding duration and frequency to match each life-stage in a plants growth. Ideal as part of an irrigation system to water plants for the exact amount of time needed. It allows you to feed little and often which will produce maximum yi..
(European version: requires plug adapter)
The D1-PPM Carbon Dioxide controller provides high-end performance, at economy pricing.
Starts by using a highly accurate NDIR CO2 sensor. The CO2 Sensor is located in a remote sensor enclosure that can be positioned up to 5 meters from the main controller.
Included inside the remote sensor enclosure is also a photocell which will detect light levels to activate the CO2 control function ONLY when desired by the ..
The SMS alarm controller kit is an easy-to-use standalone alarm system with alarm output via SMS. The SMS alarm controller provides ten independent input / output ports. By virtue of its many sensors and its individual terminal assignment, the SMS alarm controller meets all requirements.
The SMS alarm controller offers additional functions such as the option to store up to five phone number's and to switch any standard 230V device on or off via SMS.
 ..
The SMS alarm controller is an easy-to-use standalone alarm system with alarm output via SMS. The SMS alarm controller provides ten independent input / output ports. By virtue of its many sensors and its individual terminal assignment, the SMS alarm controller meets all requirements.
The SMS alarm controller offers additional functions such as the option to store up to five phone number's and to switch any standard 230V device on or off via SMS.
..
Temperature and Humidity alarm sensors for surveliance of the min. / max Temperature and Humidity.
The settings will be done over the GSM telephone. The sensor respond via SMS if the temperature or the Humidity is over/under the setting.
The sensor comes with 6m cable.
Sizes and technical data's:
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Humidity accuracy ±4.5%rh
..
Clever monitoring, dosing and data logging of solution pH levels. Made easy.
Sometimes the more you know, the better. And when it comes to managing the pH of your nutrient solution, exact knowledge makes a world of difference.
Our brainy pH controller connect constantly monitors and fine-tunes the pH levels for you. But more than that, it wirelessly data logs to your computer too, putting continuous information at your fingertips. Use the data to make sy..
The PowerPlant Hobby Kit is a complete horticultural lighting system. This system comes with a PowerPlant 600w DayLite Ballast and a PowerPlant EuroWing Reflector. Also included is a pack of 2 Eazi Rolls to allow for height adjustment, a Grolux lamp and hanging hooks. It is ready to use...
The PowerPlant Hobby Kit is a complete horticultural lighting system. This system comes with a PowerPlant 600w DayLite Ballast and a PowerPlant EuroWing Reflector. Also included is a pack of 2 Eazi Rolls to allow for height adjustment, a PowerPlant HPS lamp and hanging hooks. It is ready to use...
The PowerPlant Easy-Roll light hangers are great for achieving optimum height level for any reflector. Great hanging support with easy set up and easy to adjust. Simply pull up and down to the desired height. These handy rolls will definitely save you time and hassle...
The Twin Controller Mk2 makes it easy to control IN and OUT fans to maintain temperature and negative pressure.
Features:
Easy to set Just dial in temperature and min/max fan speeds.
Fans operate between min and max settings to maintain temperature
SMSCOM 'Motion Flow' software guarantees the smoothest fan operation
No sudden jumps in fan speed for high level accuracy and a quieter running system
Highly accurate temperature maintenance of +/1 degre..
The Twin Controller Mk2 makes it easy to control IN and OUT fans to maintain temperature and negative pressure.
Features:
Easy to set Just dial in temperature and min/max fan speeds.
Fans operate between min and max settings to maintain temperature
SMSCOM 'Motion Flow' software guarantees the smoothest fan operation
No sudden jumps in fan speed for high level accuracy and a quieter running system
Highly accurate temperature maintenance of +/1 degre..
The SMSCOM SwitchBox 2L All-in-One is a complete control unit for lights, heater and ventilators. The SwitchBox 2L All-in-One allows you to control 2 lights of a maximum of 600w each. The added Double Digital Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the SwitchBox 2L All-in-One is analogue but the control is digital which offers many advantages over controllers without software control. The..
The SMSCOM SwitchBox 4L All-in-One is a complete control unit for lights, heater and ventilators. The SwitchBox 4L All-in-One allows you to control 4 lights of a maximum of 600w each. The added Double Digital Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the SwitchBox 4L All-in-One is analogue but the control is digital which offers many advantages over controllers without software control. The..
The SMSCOM Hybrid SwitchBox 4L All-in-One is a complete control unit for lights, heater and ventilators. The Hybrid SwitchBox 4L All-in-One allows you to control 4 lights of a maximum of 600w each. The added Hybrid Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the Hybrid SwitchBox 4L All-in-One is analogue but the control is digital which offers many advantages over controllers without software..
The Faran HR Digital Humidity and Temperature Control (HR-DHTC) is a superb environmental controller and is ideal for maintaining a perfect climate for your plants.
Environmental control should be first on the list when growing indoors, when using hydroponics the HR-DHTC takes much of the micromanagement out of humidity control to make it easier for you to focus on other important areas of your grow room.
There is a close relationship between the tempera..
Hands-free monitoring and dosing of solution pH levels. Simple.
We know pH levels can be the difference between a great crop and well, a disaster. Measuring and adjusting nutrient solution levels constantly can be time-consuming. And let’s face it; you have better things to do.
Our clever pH controller automatically monitors and fine-tunes the pH levels for you. You simply set it, and forget. The pH is taken care of. So you can relax…
Features
..
The RAM AIR-PRO is an intelligent and silent indoor climate controller, designed to control extraction and intake fans thermostatically, monitoring and keeping a desired room temperature and air pressure. All you have to do is plug in the fans, set the required air temperature and fan speed/balance and the RAM AIR-PRO will do the rest. It will maintain a continuous temperature in the room and give full control over negative pressure. The RAM Air-PRO featur..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature sensor, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature sensor, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature sensor, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
Plastic case tube fans with built in thermostat and temperature controller. The fan has an idle speed to always maintain negative air pressure. It will then automatically adjust its speed through three higher speed settings to maintain the desired temperature.
The control system is integrated into the unit and completely wired. Speed control is done by winding taps, so there is no extra noise caused by a controller.
Features:
Backward curved c..
The Rhino Fan series is designed to be used with the other members of the Rhino product range. The durable casing is manufactured from reinforced plastic and on particular models steel, to give the fan a very strong outer casing that prevents leaks.
The fans are easily installed and removed and come with an easy to fit mounting clamp.
Rhino Fans come hard wired and are ready to be used from removal from the box.
• Speed-controllable
• Can be inst..
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECREASE humidity indepen..
The Active Circulation System - available to control both AquaFarm and WaterFarm systems. A series of either type of module can be connected together with the controller supplying water and nutrients to all the modules.
45 litres..
Lighting control at your fingertips
Using a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram), set the dials on the fixtures to EXT (External control), plug the controller and the fixtures directly into mains and you are set to go.
The controller can switch all the inte..
Lighting control at your fingertips
Using a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram), set the dials on the fixtures to EXT (External control), plug the controller and the fixtures directly into mains and you are set to go.
The controller can switch all the inter..
The Mini Grower is a complete controller for indoor growing systems with an artificial lighting. It defines the lighting interval for 9X600W lights, defines the watering interval by the GSE Water timer and regulates the climate by the GSE Temperature and negative pressure fan controller. All connections are wired to plugs with flap lid and can be controlled over a main switch integrate safety breaker 3x16A.
- Case: WxHxD = 200x430x95mm
- Connection 3 pole..
These fans have been designed to include an integral power cable and an integral thermostat - making it easy to ventilate your grow room.
Features:
- Integral thermostat
- Integral speed control
- Integral 4m power cable
- Wall mounting bracket
- Quality ‘Prima Klima’ brand
- Reducers available on request (max 2 per fan)..
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a standard daytime recycling t..
The Superpro DDAC-1 receives information from the sensors and activates external fans, air conditioners, dehumidifiers, heaters, and CO2 equipment as needed to maintain optimum levels for indoor agriculture. Until now, this simple idea was easier said than done.
A 15-amp / 120 or 10-amp / 240 vot circuit breaker and heavy-duty internal construction ensures that the unit will operate for years without fail. We only use high-quality UL / CE listed component..
The Maxi Controller can adjust the output according to the ambient temperature: the lamps are dimmed automatically when the temperature exceeds a maximum pre-defined level.
Using the DimLux with a Maxi Controller enables you to plug the DimLux directly into a wall socket without needing an intervening relay, time delay unit or time switch – which saves you costs.
A DimLux controlled by a Maxi Controller is the only (digital) ballast that does not need to..
An OptiClimate canopy temperature camera can be connected to the system to monitor evaporation from the crop: an excessive canopy temperature is indicative of problems with the plants' evaporation capacity (for example, due too little water or excessive light).
If the canopy temperature rises to an excessive level then the DimLux ballasts are dimmed or switched off until the temperature falls to an acceptable level: failure to lower an excessive canopy te..
The IntelliClimate is the ideal climate controller for all sizes of grow chamber. It controls temperature, humidity, lights and CO2 in a unified way to obtain the best possible growing climate. It does all this whilst minimising wastage of CO2 and electricity.
A standard feature of the IntelliClimate is the USB connection to a PC. This provides a new level of user friendliness and allows the gro..
The Harvest Master range of climate controllers make life easier and safer. They give you more control over pretty much every aspect of your grow room and as a result, you can expect to increase your yields.
CO2 EASi' Controller (with CO2 Sensing)
Operating the CO2 Easi is simple, the CO2 EASi is an intelligent control system that takes care of CO2 and at the same time is an intelligent Temperature Controller when the COOL KIT is attached.
Light ON peri..
With 8 Outputs the Harvest Master Climate Controller is capable of many things.
The Climate Controller from Harvest Master takes the guesswork out of growing your plants and turning them into a crop. With the Harvest Master Climate you simply plug the machine in and it automatically checks what you have connected and how it works.
You hardly need to open the manual. the system is capable of learning pretty much everything, and keep on lea..
With 8 Outputs the Harvest Master PRO Controller is comes with the same specification as the the Climate model, but includes the ability to monitor CO2, like the Climate, the PRO is capable of many things.
Climate 'Pro' Controller (with CO2 Sensing)
Do everything the 'Climate' Controller does AND monitor and control the feeding of CO2 to your plants for massive growth, massive cropping, fast.
Potency in your crop
Organics with flavour, power and prod..
The Harvest Master CLIMATE PLUS Controller will do everything the 'Climate' Controller does PLUS an 8 extra outputs to control up to 8 additional actions of your choice. That's a total of 16 RCA Control Points!
Just plug it in and it'll check what you have connected and how it works. You hardly need to open the manual. It'll learn about pretty much everything, and keep on learning about:
Atmosphere
Temperature
Humidity
Climate changes
.…minu..
The Climate 'PRO PLUS' 16-Output Controller with CO2 Sensing is the ultimate controller from Harvest Master, take full control of your grow room inc. CO2 and Light Systems
The PRO PLUS does the same as the 'Pro' Climate Controller but can also control other elements of your system. If you are an enthusiast or a professional that needs to do more, then you may need the Harvest Master PRO PLUS. Featuring 8 extra outputs for more actions (can be triggered by..
Harvest Master Quad and Tri Band Text Me GSM Modem
The Harvest Master GSM 'Text Me' Modem gives you instant text message updates, direct to your phone. Simply connect the Modem to any of the PLUS controllers and fully utilise the additional 8 in/outputs these controllers provide.
The Text Me GSM Modem will send 'status' updates, to get an update from your Harvest-Master controller from anywhere! You can trigger the updates by texting the unit with y..
The Variispeed Single Fan Speed Controller adjusts and controls the speed of your fans. This then ensures a long life for the fan motor. It has variable speed control along with full power or completely off and is suitable for up to 300w...
MK2 Version Now AvailableThe Fan Controller makes it simple to manually adjust the running speed of any type of extractor fan. The unit is compact, easy to use and there is no wiring necessary. Simply plug the Fan Controller into a power supply and plug your fan into the Fan Controller. Adjust the dial on the Fan Controller to regulate the running speed on the fan.
- MAX Load: 6.5A
- Plug and Play - No wiring necessary.
- Increased fan life span
- Mi..
This fan controller is for grow rooms where an extractor fan is being used to draw air out of the grow room but no fan is being used to draw air into the grow room (a passive inlet).
When you plug your extractor fan into the controller it will adjust the fan speed to provide constant air flow and maintain your chosen temperature.
Simply plug your extractor fan into the controller and lower the fan speed. Then set the temperature you wish your room to be. ..
Simply set your desired temperature and the minimum fan speed and the Smart Controller uses software to evaluate the correct fan speed to maintain the programmed temperature. This new technology ensures more accurate temperature control, smooth fan adjustment for less noise and longer fan life span.
Please note: The Smart Controller is available with the Temperature Sensor as a complete kit or available as seperate items...
The SPEED-B1 is designed to control a variable speed centrifugal fan up to 6-amps. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control the temperature within an area using a variable speed fan.
The user selects the temperature they would their area to be. At that temperature or above, the fan will be operated at full power to provide maximum cooling. Once the temperature drops 3°F b..
This unique product represents a real step forwards in automatic temperature control. Unlike other controllers that simply shunt fans from idle to full speed after temperature is exceeded, the Twin Controller automatically calculates the exact running speed for your fans to maintain the temperature you set. This new method provides more accurate temperature control, limits fan noise and guarantees negative pressure inside the room.
Simply plug in your fan..
This unique product represents a real step forwards in automatic temperature control. Unlike other controllers that simply shunt fans from idle to full speed after temperature is exceeded, the Twin Controller automatically calculates the exact running speed for your fans to maintain the temperature you set. This new method provides more accurate temperature control, limits fan noise and guarantees negative pressure inside the room.
Simply plug in your fan..
This unique product represents a real step forwards in automatic temperature control. Unlike other controllers that simply shunt fans from idle to full speed after temperature is exceeded, the Twin Controller automatically calculates the exact running speed for your fans to maintain the temperature you set. This new method provides more accurate temperature control, limits fan noise and guarantees negative pressure inside the room.
Simply plug in your fan..
The Twin Controller PRO works in exactly the same way as the original Twin Controller but has an additional programme added to its software to remove excess humidity from the growroom during the lights off cycle.
When the lights in the growroom switch off, the Twin Controller PRO will automatically switch to another programme that every hour, gently increases the fans speed for just long enough to remove excess humidity from the room. When the light..
The Twin Controller PRO works in exactly the same way as the original Twin Controller but has an additional programme added to its software to remove excess humidity from the growroom during the lights off cycle.
When the lights in the growroom switch off, the Twin Controller PRO will automatically switch to another programme that every hour, gently increases the fans speed for just long enough to remove excess humidity from the room. When the lights..
The Twin Controller PRO works in exactly the same way as the original Twin Controller but has an additional programme added to its software to remove excess humidity from the growroom during the lights off cycle.
When the lights in the growroom switch off, the Twin Controller PRO will automatically switch to another programme that every hour, gently increases the fans speed for just long enough to remove excess humidity from the room. When the lights..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The SPC is a heavy duty twin fan controller that automatically adjusts the speed of both an inlet and exhaust fan to maintain a set temperature and optimum air pressure inside the room. The SPC will automatically calculate the exact running speed for your fans to maintain the temperature you set. The highest and lowest speeds the fans can work between are user controllable.
• Extremely accurate temperature control
• Very smooth fan speed operation
• Aut..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature probe, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature probe, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature probe, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature probe, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The SPC is a twin fan controller that automatically adjusts the speed of inlet and exhaust extraction fans to maintain a set temperature. It is the perfect controller for mid to large sized grow rooms.
There is no need to adjust the speed of the fans yourself as The SPC will do this for you automatically.
The SPC gradually increases and decreases the fans speed in perfect synchronization so you will always have negative air pressure inside the room as wel..
The Prima Controller - combined fan speed controller and thermostat which controls exhaust and intake fans. This can be wired to fans, program your requirements and it will do the rest. The Prima Controller has three analogue dials:
one dial sets the best temperature for the controller to maintain
one dial sets the minimum airflow for the inlet fan
one dial sets the minimum airflow for the outlet fan
This ensures continuous air flow, regardless of t..
The minimum speed controller is a temperature depended speed controller for ventilated rooms with one or more fans. The minimum speed controller keeps the temperature constantly and impedes to run under the set minimum-speed. It can be easily controlled, adjusting the required temperature and the minimum speed on two knobs.
The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistan..
The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. It can be easily controlled, adjusting the required temperature, minimum speed and the pressure of your room on four knobs. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.
The control..
This digital temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one or more exhaust fans (up to 600 watt).
The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, ma..
This digital fan controller is a humidity and temperature dependent speed controller for rooms with intake and exhaust fans (2 x 600watt). The fan controller keeps the room humidity and temperature constant and under pressure to prevent odour from escaping.
A reliable fan controller complete with:
Sealed water resistant cover
Plugs with flap-lids and a low voltage sensor making it perfect for humid rooms.
Protection class IP44
Digital sensor supplie..
Adjustable temperature fan controller with underpressure control. Let Rhino do the work! The RC-1 enables growers to acurately control the air exchange, set desired temperature and maintain negative pressure in the grow room.
Intake and extraction fans will run at maximum speed to quickly establish desired temperature, once reached the fans will drop to a minimum idle speed ensuring the room is adequately ventilated and preventing air leaks.
How to use:..
The RAM AIR-PRO is an intelligent low noise hydroponic fan speed controller, designed to control an extractor and intake fan thermostatically. Automatically monitors and keeps desired room temperature and air pressure. Simple to use plug and play hydroponic fan speed controller, all you have to do is plug in the fans, set the required air temperature and fan speed/ balance and the AIR-PRO will do the rest.
Air-Pro twin fan speed controller is suitable for..
Temperature is one of the most important environmental factors in your grow room / glasshouse all plants have an optimum temperature at which they will grow at and a minimum and maximum temperature that they can survive therefore temperature is very important to the health & growth rate of all plants.
The Evolution digital temperature control System constantly monitors the temperature in the growing area and independently controls fans, heaters and hu..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
The OptiClimate is controlled by the standard included remote control. The extensive remote control is also a controller that runs all processes automatically and is easy to follow. After the remote has been set to the minimum temperature (night), maximum temperature (day), the Opticlimate will heat or cool depending on the day or night time...
The VAPOR-B1 is a humidity controller that can control either a dehumidifier or humidifier. Once the VAPOR-B1 is connected to a power source, and the humidification device is connected to the VAPOR-B1 power outlet, the device connected will be automatically controlled by the settings on the VAPOR-B1.
The user can choose to have different Day and Night humidity settings which will be automatically switched to the correct mode by the built-in photocell. The..
The THERM -B1 temperature controller is designed to activate a cooling or heating device. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control temperature between 7 to 35’C.
Activate a cooling heating device up to 15 amps
Separate Day and Night temperature settings
A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable me..
A new version is now available here: ROOT!T Heat Mat Thermostat.
ROOT!T’s electronic temperature controller is compatible with all heat mats and is an optional accessory for the ROOT!T Heat Mats.
The thermostat controls the temperature of heat mats evenly in colder or warmer than normal environments. It provides constant optimum temperatures for specific plants. It has an easy plug-in operation with an illuminated indicator.
Features:
Easy t..
Easy roll hangers make life easy when it comes to hanging your reflectors. Simply lift the reflector gently and it will automatically lock into place. Adjustable tension and a maxium load of 10kg per pair of easy roll hangers. Can also be used to hang adjustable mylar and other grow room equipment...
The CARBON -B1 is designed to cost-effectively control the CO2 level inside a growing area. An extremely accurate NDIR CO2 PPM sensor (part-per-million meter) is combined with a digital microprocessor to create an accurate and simple method to control supplemental CO2 use in a greenhouse. The unit can control CO2 levels up to 2500PPM. The user selects the desired CO2 level to be maintained.
A built-in photocell automatically activates the unit only during..
The GI professional CO2 monitor/controller combines the very latest technology with plug and play operation. We have added a photosensor to detect light and dark, this automaticaly changes the working mode of the controller. Other features include: fully adjustable between 0-2000ppm, wall mountable, extremely accurate external sensor with 3 meter cable & automatic calibration.
The GI controller can be used with CO2 generators, CO2 injection devices, s..
The Ultimate CO 2 Controller.
• Simple to use.
• Four separate modes of operation.
• Can be used with or without Analyser.
• Latest Microprocessor technology.
• Intelligent Multi Stage CO 2 dosing.
• Wall mountable.
• User friendly.
• Full 1 year warranty.
• Low Cost
Carbon Dioxide is one of the most important factors in an indoor growroom or glass house. Photosynthesis is the term used to describe the process by which plants combine CO 2 molecul..
A simple to use, innovative CO² sensor and controller, the Harvest Master CO² Easi Controller monitors the growing environment of your grow room – vital for healthy plant growth!
The operation of CO2 EASi.
CO2 EASi is intelligent control of CO2 and at the same time, an Intelligent Temperature controller when the COOL KIT is attached.
In Light ON periods (Day):
The controller will try to maintain Max co2 high PPM for the longest duration. It aggressively..
Temperature is one of the most important environmental factors in your grow room / glasshouse all plants have an optimum temperature at which they will grow at and a minimum and maximum temperature that they can survive therefore temperature is very important to the health & growth rate of all plants.
The Evolution digital temperature control System constantly monitors the temperature in the growing area and independently controls fans, heaters and hu..
The DV-14K is a timed relay box which you can use to switch a maximum of 4×600 Watt, or 5×400 watt luminaires on and off. The DV-14K also has a heater contact, which means the heater will come on when the lights go off, keeping a more consistent temperature in the grow room.
Dimensions: 210x290x90mm
Required voltage: 230 Vac/50Hz.
Max. output: 15 Amp
Output heater: 15 Amp
Isolation level: IP-44..
GSE Step Controllers allow accurate control of fans at low speed, without any low noise hum, which is often associated with fans running at low speeds.
The unit controls the fan speed based on the temperature of the grow room. The low voltage sensor is on a 4 metre long cable and the temperature and sensitivity are controlled independently. The controller has a water resistant cover and comes with a peace of mind 2 year warranty*...
GSE Step Controllers allow accurate control of fans at low speed, without any low noise hum, which is often associated with fans running at low speeds.
The unit controls the fan speed based on the temperature of the grow room. The low voltage sensor is on a 4 metre long cable and the temperature and sensitivity are controlled independently. The controller has a water resistant cover and comes with a peace of mind 2 year warranty*...
The PLANT!T Spreader Mat breaks the surface tension of water and nutrient and helps to wet the surface of all types of systems. Especially useful for NFT systems...
User friendly Co2 controllers and are very reliable. The Unis Co2 Controller is really simple to set up and use, you simply dial in the grow room size on your Unis Controller and connect up the regulator to your gas bottle. The easiest and most effective way to inject Co2 into your grow room. The beauty of this kit is that it has its own built in special Co2 timer, so all that you need to do is tell it the size of your grow room and it does the rest for yo..
iGROW: Power, Flexability & Control at Your Fingertips
The SUNMASTER iGROW controller is a device using Powerline communication technology to control SUNMASTER digital ballasts without additional wiring. SUNMASTER iGROW controller is equipped with functions to gain maximum control over a grow lighting with simple approach for connection and settings. Functions include basic switch ON and OFF times, dimming timer, dusk and dawn simulation for continuou..
The Imperium is a precision feed controller, which offer’s greater control over feeding duration and frequency to match each life-stage in a plants growth. Ideal as part of an irrigation system to water plants for the exact amount of time needed. It allows you to feed little and often which will produce maximum yields and allows the use of more oxygen rich media such as a 50;50 mix of Coco and Clay pebbles that would normally dry out without more regular f..
The Imperium Plus is a precision feed controller featuring an integrated Grasslin segmental timer that can be set to run from as little as 1 second up to 15 minutes, at the push of a button which offer’s greater control over feeding duration and frequency to match each life-stage in a plants growth. Ideal as part of an irrigation system to water plants for the exact amount of time needed. It allows you to feed little and often which will produce maximum yi..
(European version: requires plug adapter)
The D1-PPM Carbon Dioxide controller provides high-end performance, at economy pricing.
Starts by using a highly accurate NDIR CO2 sensor. The CO2 Sensor is located in a remote sensor enclosure that can be positioned up to 5 meters from the main controller.
Included inside the remote sensor enclosure is also a photocell which will detect light levels to activate the CO2 control function ONLY when desired by the ..
The SMS alarm controller kit is an easy-to-use standalone alarm system with alarm output via SMS. The SMS alarm controller provides ten independent input / output ports. By virtue of its many sensors and its individual terminal assignment, the SMS alarm controller meets all requirements.
The SMS alarm controller offers additional functions such as the option to store up to five phone number's and to switch any standard 230V device on or off via SMS.
 ..
The SMS alarm controller is an easy-to-use standalone alarm system with alarm output via SMS. The SMS alarm controller provides ten independent input / output ports. By virtue of its many sensors and its individual terminal assignment, the SMS alarm controller meets all requirements.
The SMS alarm controller offers additional functions such as the option to store up to five phone number's and to switch any standard 230V device on or off via SMS.
..
Temperature and Humidity alarm sensors for surveliance of the min. / max Temperature and Humidity.
The settings will be done over the GSM telephone. The sensor respond via SMS if the temperature or the Humidity is over/under the setting.
The sensor comes with 6m cable.
Sizes and technical data's:
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Humidity accuracy ±4.5%rh
..
Clever monitoring, dosing and data logging of solution pH levels. Made easy.
Sometimes the more you know, the better. And when it comes to managing the pH of your nutrient solution, exact knowledge makes a world of difference.
Our brainy pH controller connect constantly monitors and fine-tunes the pH levels for you. But more than that, it wirelessly data logs to your computer too, putting continuous information at your fingertips. Use the data to make sy..
The PowerPlant Hobby Kit is a complete horticultural lighting system. This system comes with a PowerPlant 600w DayLite Ballast and a PowerPlant EuroWing Reflector. Also included is a pack of 2 Eazi Rolls to allow for height adjustment, a Grolux lamp and hanging hooks. It is ready to use...
The PowerPlant Hobby Kit is a complete horticultural lighting system. This system comes with a PowerPlant 600w DayLite Ballast and a PowerPlant EuroWing Reflector. Also included is a pack of 2 Eazi Rolls to allow for height adjustment, a PowerPlant HPS lamp and hanging hooks. It is ready to use...
The PowerPlant Easy-Roll light hangers are great for achieving optimum height level for any reflector. Great hanging support with easy set up and easy to adjust. Simply pull up and down to the desired height. These handy rolls will definitely save you time and hassle...
The Twin Controller Mk2 makes it easy to control IN and OUT fans to maintain temperature and negative pressure.
Features:
Easy to set Just dial in temperature and min/max fan speeds.
Fans operate between min and max settings to maintain temperature
SMSCOM 'Motion Flow' software guarantees the smoothest fan operation
No sudden jumps in fan speed for high level accuracy and a quieter running system
Highly accurate temperature maintenance of +/1 degre..
The Twin Controller Mk2 makes it easy to control IN and OUT fans to maintain temperature and negative pressure.
Features:
Easy to set Just dial in temperature and min/max fan speeds.
Fans operate between min and max settings to maintain temperature
SMSCOM 'Motion Flow' software guarantees the smoothest fan operation
No sudden jumps in fan speed for high level accuracy and a quieter running system
Highly accurate temperature maintenance of +/1 degre..
The SMSCOM SwitchBox 2L All-in-One is a complete control unit for lights, heater and ventilators. The SwitchBox 2L All-in-One allows you to control 2 lights of a maximum of 600w each. The added Double Digital Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the SwitchBox 2L All-in-One is analogue but the control is digital which offers many advantages over controllers without software control. The..
The SMSCOM SwitchBox 4L All-in-One is a complete control unit for lights, heater and ventilators. The SwitchBox 4L All-in-One allows you to control 4 lights of a maximum of 600w each. The added Double Digital Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the SwitchBox 4L All-in-One is analogue but the control is digital which offers many advantages over controllers without software control. The..
The SMSCOM Hybrid SwitchBox 4L All-in-One is a complete control unit for lights, heater and ventilators. The Hybrid SwitchBox 4L All-in-One allows you to control 4 lights of a maximum of 600w each. The added Hybrid Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the Hybrid SwitchBox 4L All-in-One is analogue but the control is digital which offers many advantages over controllers without software..
The Faran HR Digital Humidity and Temperature Control (HR-DHTC) is a superb environmental controller and is ideal for maintaining a perfect climate for your plants.
Environmental control should be first on the list when growing indoors, when using hydroponics the HR-DHTC takes much of the micromanagement out of humidity control to make it easier for you to focus on other important areas of your grow room.
There is a close relationship between the tempera..
Hands-free monitoring and dosing of solution pH levels. Simple.
We know pH levels can be the difference between a great crop and well, a disaster. Measuring and adjusting nutrient solution levels constantly can be time-consuming. And let’s face it; you have better things to do.
Our clever pH controller automatically monitors and fine-tunes the pH levels for you. You simply set it, and forget. The pH is taken care of. So you can relax…
Features
..
The RAM AIR-PRO is an intelligent and silent indoor climate controller, designed to control extraction and intake fans thermostatically, monitoring and keeping a desired room temperature and air pressure. All you have to do is plug in the fans, set the required air temperature and fan speed/balance and the RAM AIR-PRO will do the rest. It will maintain a continuous temperature in the room and give full control over negative pressure. The RAM Air-PRO featur..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature sensor, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature sensor, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..
The Hybrid Controller combines mechanical fan speed operation with the latest digital temperature sensing technology. The result is a completely silent, twin fan speed controller with highly accurate temperature control.
The Hybrid Controller has a 5m NTC temperature sensor, allowing the unit to be positioned in any convenient location.
The mechanical aspect guarantees a robust and heavy duty controller with completely silent fan speed operation. The on-bo..