Perfect for the AutoGrow IntelliDose system and AutoGrow Mini Dosers An affordable, highly accurate dosing pump for use with the AutoGrow IntelliDose system and both AutoGrow Mini Dosers (EC and pH) single unit...
The new Mini Doser EC nutrient controller can work in units of EC, CF or TDS. The complete kit comes with a sensor and two economy solenoid valves pre-wired on a small panel.
The controller continuously measures the nutrient concentration in the mixing tank and adds A and B nutrients as required to maintain the EC set point. The controller counts the number of doses and in theevent of the dose count per hour exceeding a set value and alarm can be sounded...
The new Mini Doser continuously measures the pH in the mixing tank and adds either pH lower (acid) or pH raise (alkali) as required to maintain the pH set point. The controller counts the number of doses and in the event of the dose count per hour exceeding a set value an alarm can be sounded. In addition alarms can be set to sound should the pH wander outside user set limits. If the dose count per hour exceeds a user setting, the controller will stop dosi..
Feature packed
This hydroponic doser sets a new benchmark in the small dosing controller market. The Intelli-Dose is absolutely feature packed to enable it to cope with just about any hydroponic system. Just take a look at the specification overleaf.
Simple to operate
The secret to its simplicity is that the controller can be configured to suit various systems and when this is done all of the irrelevant settings disappear from the..
These are great little machines aimed at the budget conscious and those who don't need a computer interface. Ideal for hobby gardeners, schools, etc. Even large commercial growers use them - particularly for water pre-treatment (pH) or if they have a trial area with a number of reservoir tanks.
The new Mini Doser can work in units of EC, CF or TDS. The complete kit comes with a sensor and two economy solenoid valves pre-wired on a small panel...
These are great little machines aimed at the budget conscious and those who don't need a computer interface. Ideal for hobby gardeners, schools, etc. Even large commercial growers use them - particularly for water pre-treatment (pH) or if they have a trial area with a number of reservoir tanks.
The new Mini Doser can work in units of EC, CF or TDS. The complete kit comes with a sensor and two economy solenoid valves pre-wired on a small panel...
The irrigation timer is used to control a pump for irrigating crops.
This timer is ideal for scheduled Ebb & Flow systems and normal irrigation droplets or NFT systems.
The pulse time and the interval time can be set separately for day and night irrigation. The unit comes complete in a waterproof housing with hinged lids, compatible mains sockets and a built in light sensor with 4m low voltage cable which detects day/night-time; making it the perfect ..
Essential Trident - pH, EC/CF and Temp Meter - Highly accurate, professional all-in-one meter for easy nutrient control
The all-in-one conductivity, pH and temperature meter is designed to make nutrient measurement quick and easy. It can be used as a stirrer and makes it easier to take readings in deep tanks.
Accurate and rapid conductivity, pH and temperature measurement - Nutrient strength in EC, CF or PPM - Easy push button calibration - Auto turn-off..
No batteries means a 100% moisture proof design which stops liquid getting into the circuitry and allows for a greater overall lifespan. A couple of shakes and you're away!
• No Calibration Required
• No Batteries Required
• Auto Temperature Calibration
• Fully Waterproof
• Provided with EC Scale
• 5 Years Warranty..
It is essential when growing with a hydroponic solution to KNOW what the strength of the solution is before feeding your plants AND while they are growing.
This is easy if you use the Bluelab Truncheon® Nutrient Meter! To take a reading of your solution -simply place the probe head into the solution for 1-2 minutes to reach the same temperature of your nutrient. The reading is indicated by the flashing lights. Calibration of the Meter is not required.
..
The new HortiStick is a three-in-one instrument that combines the measurement of pH, conductivity (mS) and temperature. The unit simultaneously displays nutrient concentration along with either pH or temperature. This simple, easy to use meter is ideal for the testing of hydroponic solutions and water treatment processes.
The instrument features two clear LCD displays and indicates pH and temperature over the range of 0 to 14 pH and 0 to 49.9 °C. The Hor..
The pH PAL Plus tester is a user-friendly and simple to use pH meter that incorporates an automatic calibration feature. At the touch of a button, the instrument will automatically re-calibrate itself when used in conjunction with a 7.00 pH buffer solution.
The pH PAL Plus is housed in a water resistant case and features an easy to read 8 mm LCD display indicating pH over the range of 0 to 14 pH with a resolution of 0.1 pH and an accuracy of ±0.2 pH. Thi..
The HortiCare nutrient tester is designed to test the levels of nutrient concentrations in solutions that feed plant roots. The unit will test the levels of other essential mineral elements in soluble form. This simple to use instrument is housed in a water resistant case, suitable for everyday use and features an easy to read 8mm LCD display. The unit measures EC (mS), cF or TDS (ppm) at the switch of a button.
The HortiCare nutrient tester incorporates..
The Essentials pH meter is truly the most rugged glass type pH tester around. It is water and drop resistant. Easy to use, just dip the sensor into test solution, stir and wait. The unit will deliver a stable reading in about 20 seconds...
The Essentials EC meter gives direct accurate readings of nutrient solution and is very helpful in mixing nutrient concentrate with water. All readings are automatically temperature compensated. Easy to use, just dip the sensor into test solution, stir and wait. The unit will deliver a stable reading in about 20 seconds...
The ESSENTIALS pH Pro & EC Pro meters are professional quality, reliable and available with replacement probes. They have a large screen to view results and are very easy to use. They have screw calibration and come with a built in small screw driver. A feature that many customers have been asking us for.
The meters have a lifespan of about 1 to 3 years depending on rate of sampling. (Units are good for 365 accurate tests.)
These meters are some of t..
Advanced microprocessor for fast efficient readings. Hold Function: saves measurements for convenient reading and recording. Built-in digital thermometer.
Fantastic value! Advanced microprocessor for fast efficient readings
Hold Function: saves measurements for convenient reading and recording
Auto-off function: the meter shuts off after 10 minutes of non-use to conserve batteries
Built-in digital thermometer
Comes with carry case
3 ..
Advanced microprocessor for fast efficient readings. Hold Function: saves measurements for convenient reading and recording. Built-in digital thermometer.
Fantastic value! Advanced microprocessor for fast efficient readings
Hold Function: saves measurements for convenient reading and recording
Auto-off function: the meter shuts off after 10 minutes of non-use to conserve batteries
Built-in digital thermometer
Comes with carry case
3 ..
A reliable, long lasting EC meter purposely designed for the UK hydroponics market. Reads in mS, ppt, as well as uS and ppm.
A reliable, long lasting EC meter purposely designed for the UK hydroponics market
Reads in mS, ppt, as well as uS and ppm
Best value in its class
Accurately measures Electrical Conductivity (EC), TDS and temperature
Water resistant housing
Hold button and auto shut-off
Digital calibration (push button)..
Measures EC, TDS and temperature. Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl). Automatic temperature control (ATC) using three temperature co-efficiencies.
High-end EC meter
Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl)
Automatic temperature control (ATC) using three temperature co-efficiencies
Digital calibration (push button) to any point within the meter’s range
Auto-off functi..
Measures EC, TDS and temperature. Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl). Automatic temperature control (ATC) using three temperature co-efficiencies.
High-end EC meter
Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl)
Automatic temperature control (ATC) using three temperature co-efficiencies
Digital calibration (push button) to any point within the meter’s range
Auto-off functi..
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration.Includes a 7.0 pH buffer powder packet and a dropper of KCI electrode storage solution.
High-end PH meter
Resolution: pH: 0.01 pH, 0.00 – 14.0 pH
Accurate to +/- 0.02 pH
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration
Low battery indicator
Replaceable probe
Clear cap to notice moisture(or lack of) on probe
Glass encased ..
The ultimate handy solution for measuring pH!
Plants get their nutrition from minerals but they can only get all the right minerals they need if certain conditions are right.
A key factor that affects food uptake is whether your solution is acid or alkaline. We measure this in pH.
The Bluelab pH Pen is the latest innovation for hand held meters. It provides a compact quick and handy way to manage the success of your crops to ensure maximum uptake of nut..
The ultimate handy solution for measuring conductivity!
The Bluelab EC Pen is the latest innovation for hand held conductivity meters. It provides a compact, quick and handy way to manage the success of your crops.
The Bluelab EC Pen simply tells you that your plants have the right amount of nutrient in your solution and lets you know if adjustments are needed.
Display options available in °C, °F, EC, CF, ppm 500 and ppm 700.
Teamed with our Bluelab pH ..
The 8000 pH meter features an easy to read, LCD display and is supplied with a general purpose combination glass electrode.
The 8000 pH meter indicates pH over the range of 0 to 14 pH with a resolution of 0.01 pH and an accuracy of ±0.05 pH. The pH readings are manually temperature compensated over the range of 0 to 60 °C (default 25 °C).
The unit will power off automatically after ten minutes, maximising battery life.
At the touch of a button, the inst..
The 8100 pH and temperature meter features an easy to read, LCD display and is supplied as a kit which includes a 8100 pH meter, general purpose combination glass electrode, temperature probe, 4.01 and 7.00 pH buffer solutions and carrying case.
The 8100 pH meter indicates pH over the range of 0 to 14 pH with a resolution of 0.01 pH and temperature over the range of 0 to 99.9 °C with a resolution of 0.1 °C. The pH readings are automatically temperature co..
When measuring the pH of a solution is important… reach for the Bluelab pH Meter.
The Bluelab pH Meter is used to accurately measure the pH value of a solution.
Simply place the Bluelab pH probe into the solution and the reading will be displayed on the screen. As the meter is portable and does not need a power supply to operate, it can be used anywhere and anytime to help you manage your crops’ daily nutrient requirements.
Calibrati..
It’s all you need for simple and reliable crop management and it’s all within arm’s reach!
The Bluelab Combo Meter is a pH, conductivity and temperature meter all in one.
The Bluelab pH Probe and the Bluelab Conductivity/Temperature Probe are simply placed into the solution and the selected reading is displayed on screen.
As the Bluelab Combo Meter is portable and does not require a power supply to operate, it can be used anytime and..
In just one glance it magically measures all 3 critical parameters for successful growth; pH, conductivity AND temperature.
The Bluelab Guardian Monitor is a constant indicator of the desired levels of EC/ppm 700/TDS/CF, pH and temperature, enabling the grower to optimise these parameters as the crop progresses through each growing phase.
The Bluelab Guardian Monitor is mains powered and is mounted to the wall or hung on a support and the probes..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
The Bluelab pH Probe is a replacement pH probe suitable for use with Bluelab products that use a BNC fitting.
pH probes do not last forever as they age through normal use and will eventually fail. With good care and use (keeping the probe tip moist and cleaning once a month) you will extend its life.
The Bluelab pH Probe has a double junction reference providing longer life and is a gel filled non-refillable probe so is maintenance free.
Features
Ea..
The instrument is only as accurate as the probe is clean.
Probe cleaning is one of the most important parts of owning or operating any Bluelab meter, monitor or controller.
If the probe is contaminated or dirty, it affects the accuracy of the reading displayed. The Bluelab Truncheon® Meter and Bluelab Conductivity Probes read low when the probe is contaminated.
The probe surface is where the instrument takes the reading of the solution. The in..
The instrument is only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth.
Probe cleaning and correctly storing pH probes ensures you get the most accurate readings possible and will maximize the life of a probe.
The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like t..
Prolong the life of the pH-80, pH-200 and other brands of pH meter by adding a few drops of pH-STOR to the sponge in the meter cap.
Contains fungicide and sterilising agents...
Prolong the life of the pH-80, pH-200 and other brands of pH meter by adding a few drops of pH-STOR to the sponge in the meter cap.
Contains fungicide and sterilising agents...
It is important to maintain the temperature nutrient solution between 20-24°C as this will ensure better growth rates and is particularly important during the colder season
With water heaters they are only to be used in environments that are very cold. You are not meant to heat the water just remove the chill from it. The water would still seem colder than it would hotter. Feeding your plants warm water is more detrimental than feeding them cold water...
Thermostatically controlled indestructible water heaters. The Bentley of water heaters, how many traditional glass ones have you already been thru? Well never again with these all singing and dancing beauties...
The THEO water heater has all the necessary features for safe and precise temperature maintance of the water in your tank.
The exclusive technology and the high quality of the components guarantee a long lasting product.
Submersible, no thermal shock, high impact resistance, graduated scale, vertical and horizontal positioning, precise maintenance of set temperature...
New design manufactured from impact resistant, translucent polycarbonate.
Incorporates a unique LITE-SET lamp life timer technology - a tricolour neon lamp life indicator which alerts you to when the UV lamp needs to be changed.
Supplied with a LITE-SET torch to reset the lamp life indicator after changing the UV lamp.
Opposing inlet and outlet for easy installation and connection to the water supply.
Four stage hosetails for flexible hose from 1/2" to ..
A very efficient water disinfectant device that can deliver from 0 to 300mg/hr of Ozone. Highly effective against microbes such as bacteria, viruses and pythium. Ozone promotes high oxygenation of nutrient solutions, cleans pipes, trays and growing media all without the use of chemicals or other additives...
The sterilisation of ozone is 1.5 to 5 times greater than ultra violet light, three hundred to three thousand times faster than chlorine related products.
This ozonizer can produce a high standard of sanitary disinfection. The ozonizer has the function of killing germs, viruses, parasites and microbes. In addition, it brightens water, keeps it fresh, removes odours, colours and resolves poisonous harmful chemicals. The ozoniser is specifically curative fo..
Up to 100L Reservoir Chiller
Warm water will become the ultimate breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and all kinds of other infections and diseases. Warm water also greatly reduces the oxygen content able to be transported in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have little..
This Reverse Osmosis (RO) unit is supplied with everything needed in the one box to start producing high quality RO water.
The kit includes; 1 x 254mm 5 micron pre-filter (stage 1), 1 x 254mm CTO carbon filter (stage 2), 1 x 50 GPD high rejection RO membrane (stage 3) and 1 x 254mm clear 620ml refillable DI vessel with Indicator colour change resin (stage 4).
This RO unit is fitted with a back–wash valve, auto shut–off valve as standard and is supplied w..
This highly affordable RO unit from Aquariopure will clean up hard of mineralised water so it can be used for plants in a hydroponics system.
Equiped with 3 RO tubes and 2 12 inch cartridges for greater durability.
RO Membranes will need replacing every 12 to 18 months.
Filters will need replacing every 6 to 12 months...
Capacity – 500 litres per day
Water conditions:
Temperature 25ºC
Pressure: Min. 3 kg Max. 6 kg
Quality (500 tds or ppm)
Other conditions can reduce the water production Replacement cartridges every 4 – 6 months.
Reverse osmosis system optimized for gardening and hydroponic uses, up to 500 L/D of pure water. Eliminates up to 95% of all of salts and heavy metals. Also eliminates 99% of chlorine and sediments down to 5 microns, immediately!
..
Capacity – 1000 litres per day
Water conditions:
Temperature 25ºC
Pressure: Min. 3 kg Max. 6 kg
Quality (500 tds or ppm)
Other conditions can reduce the water production Replacement cartridges every 4 – 6 months.
Reverse osmosis system optimized for gardening and hydroponic uses, up to 1000 L/D of pure water. Eliminates up to 95% of all of salts and heavy metals. Also eliminates 99% of chlorine and sediments down to 5 microns, immedia..
Capacity – 3000 litres per day
Water conditions:
Temperature 30ºC
Pressure: Min. 4 kg Max. 6 kg
Quality (500 tds or ppm)
Other conditions can reduce the water production Replacement cartridges every 4 – 6 months.
Reverse osmosis system optimized for gardening and hydroponic uses, up to 3000 L/D of pure water. Eliminates up to 95% of all of salts and heavy metals. Also eliminates 99% of chlorine and sediments down to 5 microns, immedia..
Produces up to 500 L/d - No waiting, produces up to 20 L/h ULTRA PURE WATER!Easier maintenance of the water quality (pH, nitarates and alkalinity). Ensure your aquatic life gets the purest water possible. ULTRA PURE water helps you maintain minimal algae growth ans balanced pH level.Get an EC of 000PPM. Removes up to 99% of ChlorineImproves fertilizer perf..
Two stage filter system with optimum flow for garden use. Eliminates 99% of chlorine and reduces sediment down to 5 microns. immediately!
Faster growing plants and gardens.
Healthier fruits and vegetables.
Strengthens plant roots.
Protects soils, great for organics.
Removes:
Chlorine, Sediment, dirt, rust, oxidation
Herbicides and Pesticides
Volatile Organic Contaminants
(Chemical Contaminants, Benzenes,Toluene, Oils, THM’s, Detergents, PCB’s..
High capacity two stage filter system with optimum flow for garden use. Eliminates 99% of chlorine and reduces sediment down to 5 microns. immediately. This system is designed for large indoor gardens or outdoor gardens.
Faster growing plants and gardens.
Healthier fruits and vegetables.
Strengthens plant roots.
Protects soils, great for organics.
Removes:
Chlorine, Sediment, dirt, rust, oxidation
Herbicides and Pesticides
Volatile Organic Con..
A two stage filter system with optimum flow for garden use. Eliminates 99% of chlorine and reduces sediment down to 5 microns immediately!
Faster growing plants and gardens.
Healthier fruits and vegetables.
Strengthens plant roots.
Protects soils, great for organics.
Removes:
Chlorine, Sediment, dirt, rust, oxidation
Herbicides and Pesticides
Volatile Organic Contaminants
(Chemical Contaminants, Benzenes,Toluene, Oils, THM’s, Detergents, PCB’..
A ready to use two stage filter system with optimum flow for garden use. Eliminates 99% of chlorine and reduces sediment down to 5 microns immediately!
Faster growing plants and gardens.
Healthier fruits and vegetables.
Strengthens plant roots.
Protects soils, great for organics.
Removes:
Chlorine, Sediment, dirt, rust, oxidation
Herbicides and Pesticides
Volatile Organic Contaminants
(Chemical Contaminants, Benzenes,Toluene, Oils, THM’s, Det..
We use a 3rd party lab for all our nutrient and water analyses. We will organise the analysis and we will also provide a report to help in the interpretation of that analysis.
For anyone contemplating a horticultural project it is a great idea to get a water analysis right at the beginning - before any significant investment is made. This is especially important in cases where the water supplied from wells, bores or from natural sources, such as rivers. I..
We use a 3rd party lab for all our nutrient and water analyses. We will organise the analysis and we will also provide a report to help in the interpretation of that analysis.
Commercial growers analyse the nutrient solution is in balance. We recommend this for large tanks that are not changed regularly.
Supply a 250ml sample in a clean plastic bottle...
The PLANT!T Dirt Pot offer value and versatility to all gardening enthusiasts. Made from porous breathable fabric, PLANT!T Dirt Pots allow your plants to thrive, promote exceptional root health and vigorous plant growth. The soft-sided construction allows the planter to conform to your terrain, making them the perfect choice for all growing areas. The planters have reinforced seams and strength-tested fabric, so they will not tear when supporting even the ..
High quality root pruning pots
Unique design prevents root circling
Air prunes roots as they reach the wall of the pot causing plants to put out secondary roots.
Results include much larger root mass, faster rowing roots, increased nutrient uptake and bigger plants!
Available in six sizes; 2L, 4.5L, 7.5L, 9.5L, 12L, and 20L..
The Superoots Air-Pot is a recyclable, reusable plastic container that actively enhances the quality of the root systems of plants.
This revolutionary approach to containerizing tree stock produces fabulous, non-spiralling root systems that are impossible to develop in any other available container.
Made of recycled HDPE, the Superoots Air-Pot is circular in shape with a perforated sidewall, which is textured like an egg carton. There are no flat surface..
The RTA System allows multiple Air-Pot containers to be watered by hand or with a drip irrigation system. The water/nutrient can be re-circulated or run to waste depending on the chosen growing method.
How does it work?
Using a watering can or drip irrigation system, plants are fed through the tops of the Air-Pot containers. Excess water drains through the Air-Pot containers and into the RTA Stands where it is piped into the RTA Control Unit. As th..
The RTA System allows multiple Air-Pot containers to be watered by hand or with a drip irrigation system. The water/nutrient can be re-circulated or run to waste depending on the chosen growing method.
How does it work?
Using a watering can or drip irrigation system, plants are fed through the tops of the Air-Pot containers. Excess water drains through the Air-Pot containers and into the RTA Stands where it is piped into the RTA Control Unit. As th..
The RTA System allows multiple Air-Pot containers to be watered by hand or with a drip irrigation system. The water/nutrient can be re-circulated or run to waste depending on the chosen growing method.
How does it work?
Using a watering can or drip irrigation system, plants are fed through the tops of the Air-Pot containers. Excess water drains through the Air-Pot containers and into the RTA Stands where it is piped into the RTA Control Unit. As th..
The RTA System allows multiple Air-Pot containers to be watered by hand or with a drip irrigation system. The water/nutrient can be re-circulated or run to waste depending on the chosen growing method.
How does it work?
Using a watering can or drip irrigation system, plants are fed through the tops of the Air-Pot containers. Excess water drains through the Air-Pot containers and into the RTA Stands where it is piped into the RTA Control Unit. As th..
The RTA System allows multiple Air-Pot containers to be watered by hand or with a drip irrigation system. The water/nutrient can be re-circulated or run to waste depending on the chosen growing method.
How does it work?
Using a watering can or drip irrigation system, plants are fed through the tops of the Air-Pot containers. Excess water drains through the Air-Pot containers and into the RTA Stands where it is piped into the RTA Control Unit. As th..
The RTA Stand has been purposely designed for use with the Air-Pot. It allows the run off from the Air-Pot container to drain away conveniently and then be re circulated or run to waste. The RTA stand can be used individually or linked together to form a multi pot system.
- Accommodates 6, 10, 15 & 20ltr Air-Pot containers.
- Dimensions: 395x395mm
- Volume: 6ltrs
- Drilled, no Sealing Gland..
Great for pot culture and drip systems. These affordable pots and saucer come in matching black plastic. Use with PLANT!T Clay Pebbles or Canna Coco or a mixture of the two...
Square pots are useful for propagation, flood and drain, drip feed systems or for your own home made system. Use with Hydroton Clay or CANNA Coco Coir or a mixture of the two...
Round net pots are useful for propagation, aeroponics, flood and drain, drip feed systems or for your own home made system. Use with Hydroton Clay or CANNA Coco Coir or a mixture of the two...
Great for pot culture and drip systems. Similar to net pots at the base but with solid sides, these plastic pots are custom designed for Aeroponics and Hydroponics. Offer a slightly delayed drain time compared with net pots and are great for flood systems.
Note: For Hyperpod systems select '18 Litre HyperPod Inner Basket' from product options below...
These ingenious cloches can bring plants forward roughly one month after the seed sewing process. Vulnerable seedlings, cuttings and young plants are readily protected from frost, wind, rain and birds. They can be used at the end of the season to protect low growing crops and be secured to the ground for extra stability with ground pegs (supplied)...
An innovative solution for grow rooms with restricted access points, these flexible trays fit where other trays can’t go. Can be used as a catchment tray or to keep work spaces clean, these durable trays are manufactured in-house, ensuring high quality...
The ROOT!T large propagator has been designed to be large enough to fit a whole SBS tray (Cultilene/Grodan/Jiffy) without the need to trim away any plugs. Sold in boxes of 18. Tray and lid sold separately...
The ROOT!T large propagator has been designed to be large enough to fit a whole SBS tray (Cultilene/Grodan/Jiffy) without the need to trim away any plugs. Sold in boxes of 18. Tray and lid sold separately...
Water Pump & filter for use with coolgen when operating a long distance reservoir (10-40 meters).
Features:
- High pressure(3.5Bar).
- Pump,suction hose and filter.
- 3500LPH(litres per hour).
- Max pressure: 3.5 bar.
- Max recommended hose length: 40m
- Self-priming
- Course and fine filters
- Spare seal set included
- 2 year guarantee..
The bud box aqua tank is a quality collapsible water storage tank that can easily be flat packed down, making it easy to get in and out of tight spaces just as cellars and lofts.
It also makes storing your aqua tank incredibly easy between grows. To construct your bud box aqua tank simply slide the legs and the support circle into the tanks fabric outer shell, and voila!..
The FlexiTank Reservoir revolutionises water storage, it is everything you need in one compact box. It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. The FlexiTank Reservoir can fit where other reservoirs cannot go and can be packed away and stored at the end of the season. All of these features make the FlexiTank Reservoir a truly cutting edge product and the perfect practic..
We have been so impressed with these as not only can they hold a huge 200L, but also when not in use they can be folded down and easily stored away.
Easy to clean and maintain, these collapsible tanks were very popular when we showed them off at the Grow 2011 exhibition in Manchester, and everyone loved the fact that it comes with a lid that can be zipped shut, a water level indicator and a tap.
They can even be linked together for additional water stora..
350L Reservoir Plus Connection Kit. Heavy duty tank ideal for creating gravity feed or pumped irrigation systems such as the AutoPot system.
The 350L Reservoir Plus Connection Kit can also be used as a secondary source of solution for DualFlow and gully systems...
Completely adjustable to suit your growing needs. Pro Pots can be set at three different heights giving you increased levels of water storage with improved airflow and drainage, which will help maximise growth. The basket pot allows for rapid drainage and holds and substrate, this makes it excellent for DWC.
All surfaces where connectors will be attached are flat to prevent leaks. Heavy duty construction - Made to last!..
Gravity feed and main pressure irrigation controller
The PLANT!T® Water Timer can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir. Simply select the time you want the water supply to be turned on and off, link up to your irrigation dripper line and the timer will do the rest.
Key Features:
2 easy steps to programme – turn RUN TIME dial to desired irrigation time and turn FRE..
100% Natural, chemical free and non toxic
What is it? A naturally, specially blended, proprietary formulation of soy-based chemistry combining the power and versatility of the soybean to create a renewable alternative to petroleum based products.
Cleans organic debris and mineral deposits from ALL vinyl, rubber, polyethylene, EPDM, butyl and plastic surfaces, such as plant containers and hydroponic systems. Correct mineral problems such as scaling, stain..
High flow rate of 7 gallons per minute or 420 gallons per hour.
Whole house filter or stand alone (*with optional garden hose connection kit).
50,000 gallon capacity.
Removes 99% of chlorine and 95%+ of sediment.
Give your plants and family pure H20 with NO offensive tastes or odors...
Achieve the highest flow rates from THE MOST EFFICIENT RO SYSTEM ON THE PLANET!
Capable of producing more than 1,000 GPD or 42 gallons per hour of pure water
Remove 95%+ of all Parts Per Million from your tap water
SAVE MORE WATER by running a 2:1 waste to product water ratio, or optional 1:1 ratio (included)
Includes custom KDF/Catalytic carbon filter for reduction of chlorine, chloramines, iron, sulfur and heavy metals...
Perfect for the AutoGrow IntelliDose system and AutoGrow Mini Dosers An affordable, highly accurate dosing pump for use with the AutoGrow IntelliDose system and both AutoGrow Mini Dosers (EC and pH) single unit...
The new Mini Doser EC nutrient controller can work in units of EC, CF or TDS. The complete kit comes with a sensor and two economy solenoid valves pre-wired on a small panel.
The controller continuously measures the nutrient concentration in the mixing tank and adds A and B nutrients as required to maintain the EC set point. The controller counts the number of doses and in theevent of the dose count per hour exceeding a set value and alarm can be sounded...
The new Mini Doser continuously measures the pH in the mixing tank and adds either pH lower (acid) or pH raise (alkali) as required to maintain the pH set point. The controller counts the number of doses and in the event of the dose count per hour exceeding a set value an alarm can be sounded. In addition alarms can be set to sound should the pH wander outside user set limits. If the dose count per hour exceeds a user setting, the controller will stop dosi..
Feature packed
This hydroponic doser sets a new benchmark in the small dosing controller market. The Intelli-Dose is absolutely feature packed to enable it to cope with just about any hydroponic system. Just take a look at the specification overleaf.
Simple to operate
The secret to its simplicity is that the controller can be configured to suit various systems and when this is done all of the irrelevant settings disappear from the..
These are great little machines aimed at the budget conscious and those who don't need a computer interface. Ideal for hobby gardeners, schools, etc. Even large commercial growers use them - particularly for water pre-treatment (pH) or if they have a trial area with a number of reservoir tanks.
The new Mini Doser can work in units of EC, CF or TDS. The complete kit comes with a sensor and two economy solenoid valves pre-wired on a small panel...
These are great little machines aimed at the budget conscious and those who don't need a computer interface. Ideal for hobby gardeners, schools, etc. Even large commercial growers use them - particularly for water pre-treatment (pH) or if they have a trial area with a number of reservoir tanks.
The new Mini Doser can work in units of EC, CF or TDS. The complete kit comes with a sensor and two economy solenoid valves pre-wired on a small panel...
The irrigation timer is used to control a pump for irrigating crops.
This timer is ideal for scheduled Ebb & Flow systems and normal irrigation droplets or NFT systems.
The pulse time and the interval time can be set separately for day and night irrigation. The unit comes complete in a waterproof housing with hinged lids, compatible mains sockets and a built in light sensor with 4m low voltage cable which detects day/night-time; making it the perfect ..
Essential Trident - pH, EC/CF and Temp Meter - Highly accurate, professional all-in-one meter for easy nutrient control
The all-in-one conductivity, pH and temperature meter is designed to make nutrient measurement quick and easy. It can be used as a stirrer and makes it easier to take readings in deep tanks.
Accurate and rapid conductivity, pH and temperature measurement - Nutrient strength in EC, CF or PPM - Easy push button calibration - Auto turn-off..
No batteries means a 100% moisture proof design which stops liquid getting into the circuitry and allows for a greater overall lifespan. A couple of shakes and you're away!
• No Calibration Required
• No Batteries Required
• Auto Temperature Calibration
• Fully Waterproof
• Provided with EC Scale
• 5 Years Warranty..
It is essential when growing with a hydroponic solution to KNOW what the strength of the solution is before feeding your plants AND while they are growing.
This is easy if you use the Bluelab Truncheon® Nutrient Meter! To take a reading of your solution -simply place the probe head into the solution for 1-2 minutes to reach the same temperature of your nutrient. The reading is indicated by the flashing lights. Calibration of the Meter is not required.
..
The new HortiStick is a three-in-one instrument that combines the measurement of pH, conductivity (mS) and temperature. The unit simultaneously displays nutrient concentration along with either pH or temperature. This simple, easy to use meter is ideal for the testing of hydroponic solutions and water treatment processes.
The instrument features two clear LCD displays and indicates pH and temperature over the range of 0 to 14 pH and 0 to 49.9 °C. The Hor..
The pH PAL Plus tester is a user-friendly and simple to use pH meter that incorporates an automatic calibration feature. At the touch of a button, the instrument will automatically re-calibrate itself when used in conjunction with a 7.00 pH buffer solution.
The pH PAL Plus is housed in a water resistant case and features an easy to read 8 mm LCD display indicating pH over the range of 0 to 14 pH with a resolution of 0.1 pH and an accuracy of ±0.2 pH. Thi..
The HortiCare nutrient tester is designed to test the levels of nutrient concentrations in solutions that feed plant roots. The unit will test the levels of other essential mineral elements in soluble form. This simple to use instrument is housed in a water resistant case, suitable for everyday use and features an easy to read 8mm LCD display. The unit measures EC (mS), cF or TDS (ppm) at the switch of a button.
The HortiCare nutrient tester incorporates..
The Essentials pH meter is truly the most rugged glass type pH tester around. It is water and drop resistant. Easy to use, just dip the sensor into test solution, stir and wait. The unit will deliver a stable reading in about 20 seconds...
The Essentials EC meter gives direct accurate readings of nutrient solution and is very helpful in mixing nutrient concentrate with water. All readings are automatically temperature compensated. Easy to use, just dip the sensor into test solution, stir and wait. The unit will deliver a stable reading in about 20 seconds...
The ESSENTIALS pH Pro & EC Pro meters are professional quality, reliable and available with replacement probes. They have a large screen to view results and are very easy to use. They have screw calibration and come with a built in small screw driver. A feature that many customers have been asking us for.
The meters have a lifespan of about 1 to 3 years depending on rate of sampling. (Units are good for 365 accurate tests.)
These meters are some of t..
Advanced microprocessor for fast efficient readings. Hold Function: saves measurements for convenient reading and recording. Built-in digital thermometer.
Fantastic value! Advanced microprocessor for fast efficient readings
Hold Function: saves measurements for convenient reading and recording
Auto-off function: the meter shuts off after 10 minutes of non-use to conserve batteries
Built-in digital thermometer
Comes with carry case
3 ..
Advanced microprocessor for fast efficient readings. Hold Function: saves measurements for convenient reading and recording. Built-in digital thermometer.
Fantastic value! Advanced microprocessor for fast efficient readings
Hold Function: saves measurements for convenient reading and recording
Auto-off function: the meter shuts off after 10 minutes of non-use to conserve batteries
Built-in digital thermometer
Comes with carry case
3 ..
A reliable, long lasting EC meter purposely designed for the UK hydroponics market. Reads in mS, ppt, as well as uS and ppm.
A reliable, long lasting EC meter purposely designed for the UK hydroponics market
Reads in mS, ppt, as well as uS and ppm
Best value in its class
Accurately measures Electrical Conductivity (EC), TDS and temperature
Water resistant housing
Hold button and auto shut-off
Digital calibration (push button)..
Measures EC, TDS and temperature. Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl). Automatic temperature control (ATC) using three temperature co-efficiencies.
High-end EC meter
Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl)
Automatic temperature control (ATC) using three temperature co-efficiencies
Digital calibration (push button) to any point within the meter’s range
Auto-off functi..
Measures EC, TDS and temperature. Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl). Automatic temperature control (ATC) using three temperature co-efficiencies.
High-end EC meter
Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl)
Automatic temperature control (ATC) using three temperature co-efficiencies
Digital calibration (push button) to any point within the meter’s range
Auto-off functi..
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration.Includes a 7.0 pH buffer powder packet and a dropper of KCI electrode storage solution.
High-end PH meter
Resolution: pH: 0.01 pH, 0.00 – 14.0 pH
Accurate to +/- 0.02 pH
Automatic Calibration: Auto-ranging to 4, 7 or 10 pH by push button digital calibration
Low battery indicator
Replaceable probe
Clear cap to notice moisture(or lack of) on probe
Glass encased ..
The ultimate handy solution for measuring pH!
Plants get their nutrition from minerals but they can only get all the right minerals they need if certain conditions are right.
A key factor that affects food uptake is whether your solution is acid or alkaline. We measure this in pH.
The Bluelab pH Pen is the latest innovation for hand held meters. It provides a compact quick and handy way to manage the success of your crops to ensure maximum uptake of nut..
The ultimate handy solution for measuring conductivity!
The Bluelab EC Pen is the latest innovation for hand held conductivity meters. It provides a compact, quick and handy way to manage the success of your crops.
The Bluelab EC Pen simply tells you that your plants have the right amount of nutrient in your solution and lets you know if adjustments are needed.
Display options available in °C, °F, EC, CF, ppm 500 and ppm 700.
Teamed with our Bluelab pH ..
The 8000 pH meter features an easy to read, LCD display and is supplied with a general purpose combination glass electrode.
The 8000 pH meter indicates pH over the range of 0 to 14 pH with a resolution of 0.01 pH and an accuracy of ±0.05 pH. The pH readings are manually temperature compensated over the range of 0 to 60 °C (default 25 °C).
The unit will power off automatically after ten minutes, maximising battery life.
At the touch of a button, the inst..
The 8100 pH and temperature meter features an easy to read, LCD display and is supplied as a kit which includes a 8100 pH meter, general purpose combination glass electrode, temperature probe, 4.01 and 7.00 pH buffer solutions and carrying case.
The 8100 pH meter indicates pH over the range of 0 to 14 pH with a resolution of 0.01 pH and temperature over the range of 0 to 99.9 °C with a resolution of 0.1 °C. The pH readings are automatically temperature co..
When measuring the pH of a solution is important… reach for the Bluelab pH Meter.
The Bluelab pH Meter is used to accurately measure the pH value of a solution.
Simply place the Bluelab pH probe into the solution and the reading will be displayed on the screen. As the meter is portable and does not need a power supply to operate, it can be used anywhere and anytime to help you manage your crops’ daily nutrient requirements.
Calibrati..
It’s all you need for simple and reliable crop management and it’s all within arm’s reach!
The Bluelab Combo Meter is a pH, conductivity and temperature meter all in one.
The Bluelab pH Probe and the Bluelab Conductivity/Temperature Probe are simply placed into the solution and the selected reading is displayed on screen.
As the Bluelab Combo Meter is portable and does not require a power supply to operate, it can be used anytime and..
In just one glance it magically measures all 3 critical parameters for successful growth; pH, conductivity AND temperature.
The Bluelab Guardian Monitor is a constant indicator of the desired levels of EC/ppm 700/TDS/CF, pH and temperature, enabling the grower to optimise these parameters as the crop progresses through each growing phase.
The Bluelab Guardian Monitor is mains powered and is mounted to the wall or hung on a support and the probes..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
The Bluelab pH Probe is a replacement pH probe suitable for use with Bluelab products that use a BNC fitting.
pH probes do not last forever as they age through normal use and will eventually fail. With good care and use (keeping the probe tip moist and cleaning once a month) you will extend its life.
The Bluelab pH Probe has a double junction reference providing longer life and is a gel filled non-refillable probe so is maintenance free.
Features
Ea..
The instrument is only as accurate as the probe is clean.
Probe cleaning is one of the most important parts of owning or operating any Bluelab meter, monitor or controller.
If the probe is contaminated or dirty, it affects the accuracy of the reading displayed. The Bluelab Truncheon® Meter and Bluelab Conductivity Probes read low when the probe is contaminated.
The probe surface is where the instrument takes the reading of the solution. The in..
The instrument is only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth.
Probe cleaning and correctly storing pH probes ensures you get the most accurate readings possible and will maximize the life of a probe.
The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like t..
Prolong the life of the pH-80, pH-200 and other brands of pH meter by adding a few drops of pH-STOR to the sponge in the meter cap.
Contains fungicide and sterilising agents...
Prolong the life of the pH-80, pH-200 and other brands of pH meter by adding a few drops of pH-STOR to the sponge in the meter cap.
Contains fungicide and sterilising agents...
It is important to maintain the temperature nutrient solution between 20-24°C as this will ensure better growth rates and is particularly important during the colder season
With water heaters they are only to be used in environments that are very cold. You are not meant to heat the water just remove the chill from it. The water would still seem colder than it would hotter. Feeding your plants warm water is more detrimental than feeding them cold water...
Thermostatically controlled indestructible water heaters. The Bentley of water heaters, how many traditional glass ones have you already been thru? Well never again with these all singing and dancing beauties...
The THEO water heater has all the necessary features for safe and precise temperature maintance of the water in your tank.
The exclusive technology and the high quality of the components guarantee a long lasting product.
Submersible, no thermal shock, high impact resistance, graduated scale, vertical and horizontal positioning, precise maintenance of set temperature...
New design manufactured from impact resistant, translucent polycarbonate.
Incorporates a unique LITE-SET lamp life timer technology - a tricolour neon lamp life indicator which alerts you to when the UV lamp needs to be changed.
Supplied with a LITE-SET torch to reset the lamp life indicator after changing the UV lamp.
Opposing inlet and outlet for easy installation and connection to the water supply.
Four stage hosetails for flexible hose from 1/2" to ..
A very efficient water disinfectant device that can deliver from 0 to 300mg/hr of Ozone. Highly effective against microbes such as bacteria, viruses and pythium. Ozone promotes high oxygenation of nutrient solutions, cleans pipes, trays and growing media all without the use of chemicals or other additives...
The sterilisation of ozone is 1.5 to 5 times greater than ultra violet light, three hundred to three thousand times faster than chlorine related products.
This ozonizer can produce a high standard of sanitary disinfection. The ozonizer has the function of killing germs, viruses, parasites and microbes. In addition, it brightens water, keeps it fresh, removes odours, colours and resolves poisonous harmful chemicals. The ozoniser is specifically curative fo..
Up to 100L Reservoir Chiller
Warm water will become the ultimate breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and all kinds of other infections and diseases. Warm water also greatly reduces the oxygen content able to be transported in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have little..
This Reverse Osmosis (RO) unit is supplied with everything needed in the one box to start producing high quality RO water.
The kit includes; 1 x 254mm 5 micron pre-filter (stage 1), 1 x 254mm CTO carbon filter (stage 2), 1 x 50 GPD high rejection RO membrane (stage 3) and 1 x 254mm clear 620ml refillable DI vessel with Indicator colour change resin (stage 4).
This RO unit is fitted with a back–wash valve, auto shut–off valve as standard and is supplied w..
This highly affordable RO unit from Aquariopure will clean up hard of mineralised water so it can be used for plants in a hydroponics system.
Equiped with 3 RO tubes and 2 12 inch cartridges for greater durability.
RO Membranes will need replacing every 12 to 18 months.
Filters will need replacing every 6 to 12 months...
Capacity – 500 litres per day
Water conditions:
Temperature 25ºC
Pressure: Min. 3 kg Max. 6 kg
Quality (500 tds or ppm)
Other conditions can reduce the water production Replacement cartridges every 4 – 6 months.
Reverse osmosis system optimized for gardening and hydroponic uses, up to 500 L/D of pure water. Eliminates up to 95% of all of salts and heavy metals. Also eliminates 99% of chlorine and sediments down to 5 microns, immediately!
..
Capacity – 1000 litres per day
Water conditions:
Temperature 25ºC
Pressure: Min. 3 kg Max. 6 kg
Quality (500 tds or ppm)
Other conditions can reduce the water production Replacement cartridges every 4 – 6 months.
Reverse osmosis system optimized for gardening and hydroponic uses, up to 1000 L/D of pure water. Eliminates up to 95% of all of salts and heavy metals. Also eliminates 99% of chlorine and sediments down to 5 microns, immedia..
Capacity – 3000 litres per day
Water conditions:
Temperature 30ºC
Pressure: Min. 4 kg Max. 6 kg
Quality (500 tds or ppm)
Other conditions can reduce the water production Replacement cartridges every 4 – 6 months.
Reverse osmosis system optimized for gardening and hydroponic uses, up to 3000 L/D of pure water. Eliminates up to 95% of all of salts and heavy metals. Also eliminates 99% of chlorine and sediments down to 5 microns, immedia..
Produces up to 500 L/d - No waiting, produces up to 20 L/h ULTRA PURE WATER!Easier maintenance of the water quality (pH, nitarates and alkalinity). Ensure your aquatic life gets the purest water possible. ULTRA PURE water helps you maintain minimal algae growth ans balanced pH level.Get an EC of 000PPM. Removes up to 99% of ChlorineImproves fertilizer perf..
Two stage filter system with optimum flow for garden use. Eliminates 99% of chlorine and reduces sediment down to 5 microns. immediately!
Faster growing plants and gardens.
Healthier fruits and vegetables.
Strengthens plant roots.
Protects soils, great for organics.
Removes:
Chlorine, Sediment, dirt, rust, oxidation
Herbicides and Pesticides
Volatile Organic Contaminants
(Chemical Contaminants, Benzenes,Toluene, Oils, THM’s, Detergents, PCB’s..
High capacity two stage filter system with optimum flow for garden use. Eliminates 99% of chlorine and reduces sediment down to 5 microns. immediately. This system is designed for large indoor gardens or outdoor gardens.
Faster growing plants and gardens.
Healthier fruits and vegetables.
Strengthens plant roots.
Protects soils, great for organics.
Removes:
Chlorine, Sediment, dirt, rust, oxidation
Herbicides and Pesticides
Volatile Organic Con..
A two stage filter system with optimum flow for garden use. Eliminates 99% of chlorine and reduces sediment down to 5 microns immediately!
Faster growing plants and gardens.
Healthier fruits and vegetables.
Strengthens plant roots.
Protects soils, great for organics.
Removes:
Chlorine, Sediment, dirt, rust, oxidation
Herbicides and Pesticides
Volatile Organic Contaminants
(Chemical Contaminants, Benzenes,Toluene, Oils, THM’s, Detergents, PCB’..
A ready to use two stage filter system with optimum flow for garden use. Eliminates 99% of chlorine and reduces sediment down to 5 microns immediately!
Faster growing plants and gardens.
Healthier fruits and vegetables.
Strengthens plant roots.
Protects soils, great for organics.
Removes:
Chlorine, Sediment, dirt, rust, oxidation
Herbicides and Pesticides
Volatile Organic Contaminants
(Chemical Contaminants, Benzenes,Toluene, Oils, THM’s, Det..
We use a 3rd party lab for all our nutrient and water analyses. We will organise the analysis and we will also provide a report to help in the interpretation of that analysis.
For anyone contemplating a horticultural project it is a great idea to get a water analysis right at the beginning - before any significant investment is made. This is especially important in cases where the water supplied from wells, bores or from natural sources, such as rivers. I..
We use a 3rd party lab for all our nutrient and water analyses. We will organise the analysis and we will also provide a report to help in the interpretation of that analysis.
Commercial growers analyse the nutrient solution is in balance. We recommend this for large tanks that are not changed regularly.
Supply a 250ml sample in a clean plastic bottle...
The PLANT!T Dirt Pot offer value and versatility to all gardening enthusiasts. Made from porous breathable fabric, PLANT!T Dirt Pots allow your plants to thrive, promote exceptional root health and vigorous plant growth. The soft-sided construction allows the planter to conform to your terrain, making them the perfect choice for all growing areas. The planters have reinforced seams and strength-tested fabric, so they will not tear when supporting even the ..
High quality root pruning pots
Unique design prevents root circling
Air prunes roots as they reach the wall of the pot causing plants to put out secondary roots.
Results include much larger root mass, faster rowing roots, increased nutrient uptake and bigger plants!
Available in six sizes; 2L, 4.5L, 7.5L, 9.5L, 12L, and 20L..
The Superoots Air-Pot is a recyclable, reusable plastic container that actively enhances the quality of the root systems of plants.
This revolutionary approach to containerizing tree stock produces fabulous, non-spiralling root systems that are impossible to develop in any other available container.
Made of recycled HDPE, the Superoots Air-Pot is circular in shape with a perforated sidewall, which is textured like an egg carton. There are no flat surface..
The RTA System allows multiple Air-Pot containers to be watered by hand or with a drip irrigation system. The water/nutrient can be re-circulated or run to waste depending on the chosen growing method.
How does it work?
Using a watering can or drip irrigation system, plants are fed through the tops of the Air-Pot containers. Excess water drains through the Air-Pot containers and into the RTA Stands where it is piped into the RTA Control Unit. As th..
The RTA System allows multiple Air-Pot containers to be watered by hand or with a drip irrigation system. The water/nutrient can be re-circulated or run to waste depending on the chosen growing method.
How does it work?
Using a watering can or drip irrigation system, plants are fed through the tops of the Air-Pot containers. Excess water drains through the Air-Pot containers and into the RTA Stands where it is piped into the RTA Control Unit. As th..
The RTA System allows multiple Air-Pot containers to be watered by hand or with a drip irrigation system. The water/nutrient can be re-circulated or run to waste depending on the chosen growing method.
How does it work?
Using a watering can or drip irrigation system, plants are fed through the tops of the Air-Pot containers. Excess water drains through the Air-Pot containers and into the RTA Stands where it is piped into the RTA Control Unit. As th..
The RTA System allows multiple Air-Pot containers to be watered by hand or with a drip irrigation system. The water/nutrient can be re-circulated or run to waste depending on the chosen growing method.
How does it work?
Using a watering can or drip irrigation system, plants are fed through the tops of the Air-Pot containers. Excess water drains through the Air-Pot containers and into the RTA Stands where it is piped into the RTA Control Unit. As th..
The RTA System allows multiple Air-Pot containers to be watered by hand or with a drip irrigation system. The water/nutrient can be re-circulated or run to waste depending on the chosen growing method.
How does it work?
Using a watering can or drip irrigation system, plants are fed through the tops of the Air-Pot containers. Excess water drains through the Air-Pot containers and into the RTA Stands where it is piped into the RTA Control Unit. As th..
The RTA Stand has been purposely designed for use with the Air-Pot. It allows the run off from the Air-Pot container to drain away conveniently and then be re circulated or run to waste. The RTA stand can be used individually or linked together to form a multi pot system.
- Accommodates 6, 10, 15 & 20ltr Air-Pot containers.
- Dimensions: 395x395mm
- Volume: 6ltrs
- Drilled, no Sealing Gland..
Great for pot culture and drip systems. These affordable pots and saucer come in matching black plastic. Use with PLANT!T Clay Pebbles or Canna Coco or a mixture of the two...
Square pots are useful for propagation, flood and drain, drip feed systems or for your own home made system. Use with Hydroton Clay or CANNA Coco Coir or a mixture of the two...
Round net pots are useful for propagation, aeroponics, flood and drain, drip feed systems or for your own home made system. Use with Hydroton Clay or CANNA Coco Coir or a mixture of the two...
Great for pot culture and drip systems. Similar to net pots at the base but with solid sides, these plastic pots are custom designed for Aeroponics and Hydroponics. Offer a slightly delayed drain time compared with net pots and are great for flood systems.
Note: For Hyperpod systems select '18 Litre HyperPod Inner Basket' from product options below...
These ingenious cloches can bring plants forward roughly one month after the seed sewing process. Vulnerable seedlings, cuttings and young plants are readily protected from frost, wind, rain and birds. They can be used at the end of the season to protect low growing crops and be secured to the ground for extra stability with ground pegs (supplied)...
An innovative solution for grow rooms with restricted access points, these flexible trays fit where other trays can’t go. Can be used as a catchment tray or to keep work spaces clean, these durable trays are manufactured in-house, ensuring high quality...
The ROOT!T large propagator has been designed to be large enough to fit a whole SBS tray (Cultilene/Grodan/Jiffy) without the need to trim away any plugs. Sold in boxes of 18. Tray and lid sold separately...
The ROOT!T large propagator has been designed to be large enough to fit a whole SBS tray (Cultilene/Grodan/Jiffy) without the need to trim away any plugs. Sold in boxes of 18. Tray and lid sold separately...
Water Pump & filter for use with coolgen when operating a long distance reservoir (10-40 meters).
Features:
- High pressure(3.5Bar).
- Pump,suction hose and filter.
- 3500LPH(litres per hour).
- Max pressure: 3.5 bar.
- Max recommended hose length: 40m
- Self-priming
- Course and fine filters
- Spare seal set included
- 2 year guarantee..
The bud box aqua tank is a quality collapsible water storage tank that can easily be flat packed down, making it easy to get in and out of tight spaces just as cellars and lofts.
It also makes storing your aqua tank incredibly easy between grows. To construct your bud box aqua tank simply slide the legs and the support circle into the tanks fabric outer shell, and voila!..
The FlexiTank Reservoir revolutionises water storage, it is everything you need in one compact box. It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. The FlexiTank Reservoir can fit where other reservoirs cannot go and can be packed away and stored at the end of the season. All of these features make the FlexiTank Reservoir a truly cutting edge product and the perfect practic..
We have been so impressed with these as not only can they hold a huge 200L, but also when not in use they can be folded down and easily stored away.
Easy to clean and maintain, these collapsible tanks were very popular when we showed them off at the Grow 2011 exhibition in Manchester, and everyone loved the fact that it comes with a lid that can be zipped shut, a water level indicator and a tap.
They can even be linked together for additional water stora..
350L Reservoir Plus Connection Kit. Heavy duty tank ideal for creating gravity feed or pumped irrigation systems such as the AutoPot system.
The 350L Reservoir Plus Connection Kit can also be used as a secondary source of solution for DualFlow and gully systems...
Completely adjustable to suit your growing needs. Pro Pots can be set at three different heights giving you increased levels of water storage with improved airflow and drainage, which will help maximise growth. The basket pot allows for rapid drainage and holds and substrate, this makes it excellent for DWC.
All surfaces where connectors will be attached are flat to prevent leaks. Heavy duty construction - Made to last!..
Gravity feed and main pressure irrigation controller
The PLANT!T® Water Timer can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir. Simply select the time you want the water supply to be turned on and off, link up to your irrigation dripper line and the timer will do the rest.
Key Features:
2 easy steps to programme – turn RUN TIME dial to desired irrigation time and turn FRE..
100% Natural, chemical free and non toxic
What is it? A naturally, specially blended, proprietary formulation of soy-based chemistry combining the power and versatility of the soybean to create a renewable alternative to petroleum based products.
Cleans organic debris and mineral deposits from ALL vinyl, rubber, polyethylene, EPDM, butyl and plastic surfaces, such as plant containers and hydroponic systems. Correct mineral problems such as scaling, stain..
High flow rate of 7 gallons per minute or 420 gallons per hour.
Whole house filter or stand alone (*with optional garden hose connection kit).
50,000 gallon capacity.
Removes 99% of chlorine and 95%+ of sediment.
Give your plants and family pure H20 with NO offensive tastes or odors...
Achieve the highest flow rates from THE MOST EFFICIENT RO SYSTEM ON THE PLANET!
Capable of producing more than 1,000 GPD or 42 gallons per hour of pure water
Remove 95%+ of all Parts Per Million from your tap water
SAVE MORE WATER by running a 2:1 waste to product water ratio, or optional 1:1 ratio (included)
Includes custom KDF/Catalytic carbon filter for reduction of chlorine, chloramines, iron, sulfur and heavy metals...