An OptiClimate canopy temperature camera can be connected to the system to monitor evaporation from the crop: an excessive canopy temperature is indicative of problems with the plants' evaporation capacity (for example, due too little water or excessive light).
If the canopy temperature rises to an excessive level then the DimLux ballasts are dimmed or switched off until the temperature falls to an acceptable level: failure to lower an excessive canopy te..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The OptiClimate water cooled air conditioner is equipped with an active carbon filter cloth, which constantly odors particles from the air to prevent any odors. The OptiClimate water cooled air will come standard with a carbon filter cloth, which must be replaced every six months in order to guarantee the best quality...
The water-cooled air conditioning Opticlimate become standard with vibration rubbers. Attached to the Opticlimate these special insulation springs are designed on the weight of the Opticlimate and provide optimal insulation. These springs are mainly of interest in placing the Opticlimate on a solid surface, with installation on steel wire are not necessary...
The OptiClimate water cooled air conditioner is equipped with an active carbon filter cloth, which constantly odors particles from the air to prevent any odors. The OptiClimate water cooled air will come standard with a carbon filter cloth, which must be replaced every six months in order to guarantee the best quality...
With the waterstroke damper you catch pressure differences in the water. By stopping or initiating a flow of water it causes a pressure difference which will be absorbed by the waterstroke damper...
The OptiClimate is controlled by the standard included remote control. The extensive remote control is also a controller that runs all processes automatically and is easy to follow. After the remote has been set to the minimum temperature (night), maximum temperature (day), the Opticlimate will heat or cool depending on the day or night time...
Head up to 4 meters. The connection is suitable for 7/4MM PVC hose. This pump is needed if the OptiClimate is lower than the drain and condensation water can not flow away from the slope...
The evaporative cooler can drain water from the OptiClimate cool and ready for re-use. The hot water outlet (50 ° Celcius) is cooled, so it can be re-used directly as cooling medium...
Most humidifiers do not support integrated scale filter, whereby the lime particles are not removed. Out of the mist In combination with a Opticlimate there is a chance that this lime particles precipitate in the engine, leading to faster wear.
Through this external water filter, you can be sure that all lime particles are removed before the spray is released...
OptiClimate Plenumbox 3500 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 3500 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 3500 PRO3
Dimensions: 480 x 399mm
Flange: 250 mm
Especially for: Dual-Room s..
OptiClimate Plenumbox 6000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 6000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 6000 PRO3
Dimensions: 597 x 497mm
Flange: 250 mm
Especially for: Dual-Room s..
OptiClimate Plenumbox 10000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 10000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 10000 PRO3
Dimensions: 688 x 497 mm
Flange: 355 mm
Especially for: Dual-Ro..
OptiClimate Plenumbox 15000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 15000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 15000 PRO3
Dimensions: 890 x 538 mm
Flange: 355 mm
Especially for: Dual-Ro..
OptiClimate CO2 pressure reducing valve for gas cylinders. This product is of industrial grade quality and has large, easily legible pressure gauges. It is equipped with a high-quality magnetic valve that does not buzz or vibrate. Provided with fine adjustment in increments of 1-30L/min for accurately controlling the climate of any room, large or small. Cheaper valves often have no fine adjustment and are fixed at 15L/min, creating peaks in CO2 level..
OptiClimate 3500 PRO4 watercooled aircon.
The OptiClimate 3500 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 3,5 kW
Dimensions: 870 x 630 x 405 mm
Weight: 58 kg
Water usage: 1 up to 2 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 2x1500W
Phase: 1 - 3
Split Unit: ..
OptiClimate 6500 PRO4 Watercooled Aircon.
The OptiClimate 6500 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 6 kW
Dimensions: 990 x 760 x 505 mm
Weight: 85 kg
Water usage: 2 up to 4 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1500W
Phase: 1 - 3
Split Unit: No..
OptiClimate 10000 PRO4 Watercooled Aircon.
The OptiClimate 10000 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 10 kW
Dimensions: 1050 x 800 x 505 mm
Weight: 125 kg
Water usage: 3 up to 6 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1200W
Phase: 1 - 3
Split Uni..
OptiClimate 15000 PRO4 Watercooled Aircon.
The OptiClimate 15000 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 15 kW
Dimensions: 1230 x 900 x 545 mm
Weight: 165 kg
Water usage: 5 up to 9 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2700W
Phase: 3
Split Unit: N..
OptiClimate 3500 PRO4 Split air-cooled Aircon.
The OptiClimate 3500 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 3.5 kW
Dimensions: 870 x 630 x 405 mm
Weight: 58 kg
Voltage: 230V
Power consumtion: 820W
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 2x1500W
Phase: 1 - 3
Split Unit: Yes
Extended Re..
OptiClimate 6000 PRO4 Split air-cooled Aircon.
The OptiClimate 6000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 6 kW
Dimensions: 990 x 760 x 505 mm
Weight: 85 kg
Power Consumption: 1590W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1500W
Phase: 1 - 3
Split Unit: Yes
Extended Re..
OptiClimate 10000 PRO4 Split air-cooled Aircon.
The OptiClimate 10000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 10 kW
Dimensions: 1050 x 800 x 505 mm
Weight: 125 kg
Power Consumption: 2390W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2000W
Phase: 1 - 3
Split Unit: Yes
Extend..
OptiClimate 15000 PRO4 Split air-cooled Aircon.
The OptiClimate 15000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 15 kW
Dimensions: 1230 x 900 x 545 mm
Weight: 165 kg
Power Consumption: 3500W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2700W
Phase: 1 - 3
Split Unit: Yes
Extend..
OptiClimate CO2 Monitor with humidity (RH) and temperature sensor. The OptiClimate CO2 Monitor clearly indicates the CO2 level in the room. This device is also equipped with a humidity sensor and a temperature sensor. Furthermore, these values are clearly readible in the digital display of the CO2 monitor. This CO2 monitor can only be used as a reference, and has no adjustment options...
OptiClimate CO2 Sensor for Maxi Controller Gas Protect. Separate OptiClimate CO2 sensor that can be connected to the Maxi Controller, and which also controls the CO2 generator or CO2 pressure reducing valve. The sensors use the Dual Beam NDIR technology which delivers unprecedented calibration stability and accuracy. Other CO2 sensors are Single beam and need to be regularly calibrated. Dual Beam sensors are two sensors in one where the measuring sens..
A separate OptiClimate CO2 sensor that can be connected to the DimLux Controller, and which also controls the CO2 generator or CO2 pressure reducing valve. The sensors use the Dual Beam NDIR technology which delivers unprecedented calibration stability and accuracy. Other CO2 sensors are Single beam and need to be regularly calibrated. Dual Beam sensors are two sensors in one where the measuring sensor is periodically adjusted by the second sensor. Be..
OptiClimate three-way valve 250mm is suitable for the OptiClimate 3500, 6000 PRO3 and PRO4.
This three-way valve for the OptiClimate 3500, 6000 PRO3 and PRO4 should be used within the Dual Room setup: only one OptiClimate will be required to cool two rooms. However, an additional temperature sensor is required which you can order here as well...
OptiClimate 355mm three-way valve is suitable for the OptiClimate 10000, 15000 PRO3 and PRO4.
The three-way valve is used within the Dual Room System. Using the Dual Room System, only one OptiClimate will be required to cool two rooms. However, an additional temperature sensor is required. When used with the three-way valve, the night-time heating and dehumidifying function is cancelled...
OptiClimate damping plates with adhesive layer. These damping plates are specifically designed for all versions of the OptiClimate watercooled airco and ensure extra damping and a quieter system. 2 pieces...
OptiClimate Thermal Vapour Barrier Film (25 x 1.5m roll). The OptiClimate thermal vapour barrier reflective film is well suited to isolate and reflect an area all along. Due to the bubble profile all the heat stays inside the area. This product is best to combine with the aluminum reflective tape. 25 x 1.5m roll...
The OptiClimate Auto Pilot Natural Gas (NG) 4KW CO2 generator works without a pilot burner with electric ignition, and has the added benefit of lower gas consumption, however, it is less suitable for smaller spaces as it is not adjustable. This 4KW model is suitable for 16 to 30 m2 spaces, depending on the extraction efficiencies. For larger spaces, we recommend that several heaters be used in different areas of the space, ideally with a CO2 generato..
The OptiClimate Auto Pilot Natural Gas (NG) 8KW CO2 generator works without a pilot burner with electric ignition, and has the added benefit of lower gas consumption, however, it is less suitable for smaller spaces as it is not adjustable. This 8KW model is suitable for 32 to 60 m2 spaces, depending on the extraction efficiencies. For larger spaces, we recommend that several heaters be used in different areas of the space, ideally with a CO2 generato..
The OptiClimate Auto Pilot 4KW CO2 generator works without a pilot burner but with an electric ignition, and has the added benefit of lower gas consumption, however, it is less suitable for smaller spaces as it is not adjustable. The 4 KW model is suitable for 16 to 30 m2 rooms, depending on the extraction efficiencies. For larger rooms, we recommend that several heaters be used in different areas of the space, ideally with a CO2 generator for each Op..
The OptiClimate Auto Pilot Propane (LPG) 8KW CO2 generator works without a pilot burner with electric ignition, and has the added benefit of lower gas consumption, however, it is less suitable for smaller spaces as it is not adjustable. The 8 KW model is suitable for 32 to 60 m2 rooms, depending on the extraction efficiencies. For larger rooms, we recommend that several heaters be used in different areas of the space, ideally with a CO2 generato..
The Biogreen CO2 generator comes with a pilot burner. The capacity control is infinitely variable from 0.75 to 4.5 kW. An advantage of the infinitely variable control is that the generator's capacity can be adjusted to the specific requirements of the room, whereas fixed-capacity generators trigger peaks in the CO2 output.
During the growth period, the pilot burner supplies just enough CO2 to supplement the CO2 in the growing environment. The ..
CO2 Generator BioGreen Propane (LPG) 1-4KW. The Biogreen CO2 generator comes with a pilot burner. The capacity control is infinitely variable from 0.75 to 4.5 kW. An advantage of the infinitely variable control is that the generator's capacity can be adjusted to the specific requirements of the room, whereas fixed-capacity generators trigger peaks in the CO2 output.
During the growth period, the pilot burner supplies just enough CO2 to supplem..
This special air distribution hose is made of high quality anti-static white LDPE film with a thickness of 180 Mu. There are round holes punched in an area of 120˘Ş. As a result, the air is directed to 1/3 of the circle and the air at a high velocity is blown out. As use is made of white film, the air distribution hose is light reflective...
The connection set comes standard with the OptiClimate. Separately available connection sets typically consists of:
Magnetic valve
LDPE connectors
Vibration insulating rubbers with mounting hardware
Condensate water connecting nipple
Teflon tape
Adhesive gel to prevent connectors from loosening over time
7m cord for securing the circuit board, and operating instructions..
The flanges are provided with screw holes, which can also be used to secure the flange against a surface. The hose connection is tapered for easy installation. The flanges are available in four different diameters, but each flange also comes in one or more smaller sizes.
Flange code information: The first number indicates the diameter of the filter on which the flange can be mounted. The second number is the diameter of the flange connectio..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain t..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
This version can be wired single or 3 phase.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical me..
This version can be wired single or 3 phase.
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their ..
OptiClimate 15000 PRO4 Split air-cooled Aircon.
The OptiClimate 15000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 15 kW
Dimensions: 1230 x 900 x 545 mm
Weight: 165 kg
Power Consumption: 3500W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2700W
Phase: 1 - 3
Split Unit: Yes
Extend..
Small and lightweight water chiller, ideal for small spaces in residential and commercial buildings.
OptiClimate Compact Ultra Vertical Water Cooler Specifications:
Capacity: from 4 to 53 kW
Tube diameter:3/8" smooth inner surface (S) and grooved inner surface (R)
Fin spacing:2,1 mm
Fan motor diameters:350 mm - 4 and 6 poles
Available number of fan motors:from 1 to 2x3 fan motors
4.5KW Specifications:
Weight: 7 KG
Dimensions (mm..
Solid water chiller, with a large cooling capacity.
12 kW, 17 kW and 32 kW - Vertical position.
Additional Information:
Capacity:from 14 to 280 kW
3/8" tube diameter: grooved inner surface and high-efficiency fin with 2..1 mm spacing for turbo models
3/8" tube diameter: smooth inner surface and corrugated fin with 2.1 mm spacing for standard models
Fan motor diameters: 450 mm, 500 mm and 630 mm - 4 poles, 6 poles and 12 poles
Available nu..
Solid water chiller, with a large cooling capacity.
Addition Information:
3/8" tube diameter:grooved inner surface and high-efficiency fin with 2..1 mm spacing for turbo models
3/8" tube diameter: smooth inner surface and corrugated fin with 2.1 mm spacing for standard models
Fan motor diameters:800 mm and 910 mm - 6 poles, 8 poles and 12 poles
Available number of fan motors:from 1 to 2x5 fan motorsSpecifications:Weight: 125KGDimensions (mm)..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
This kit contains 2 x elbow pieces that connect to your Opticlimate and allow the fitting of speedfit pipe. It also contains the fittings for the leak detector shut-off valve.
Selected to fit your Opticlimate
Fits every size of Opticlimate
Allows you to connect to speedfit pipe for easy installation
For use with 15mm pipe
Kit Contains:
2 x elbow fittings with speedfit connectors (inlet and drain)
2 x coupler fittings for the auto-off valve (wit..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
The RevomaxII is a climate control system with our new Infinity DC inverter technology, which has the broadest capacity range of all existing air conditioning units. We can go as low as 20-30% cooling capacity where other products can only go as low as 60%. This results in a super stable climate no matter if the customer installed less fixtures than optimum.
Super stable humidity. With the RevomaxII, the humidity will be within ±4%RH from the set-point (f..
Ex-Demo - 1 Hour of Use - 2 Available
Brand new price: £3111.48
Ex-Demo price: £2489
Small and lightweight water chiller, ideal for small spaces in residential and commercial buildings.
OptiClimate Compact Ultra Vertical Water Cooler Specifications:
Capacity: from 4 to 53 kW
Tube diameter:3/8" smooth inner surface (S) and grooved inner surface (R)
Fin spacing:2,1 mm
Fan motor diameters:350 mm - 4 and 6 poles
Available number of fan motors:from 1 ..
An OptiClimate canopy temperature camera can be connected to the system to monitor evaporation from the crop: an excessive canopy temperature is indicative of problems with the plants' evaporation capacity (for example, due too little water or excessive light).
If the canopy temperature rises to an excessive level then the DimLux ballasts are dimmed or switched off until the temperature falls to an acceptable level: failure to lower an excessive canopy te..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The OptiClimate water cooled air conditioner is equipped with an active carbon filter cloth, which constantly odors particles from the air to prevent any odors. The OptiClimate water cooled air will come standard with a carbon filter cloth, which must be replaced every six months in order to guarantee the best quality...
The water-cooled air conditioning Opticlimate become standard with vibration rubbers. Attached to the Opticlimate these special insulation springs are designed on the weight of the Opticlimate and provide optimal insulation. These springs are mainly of interest in placing the Opticlimate on a solid surface, with installation on steel wire are not necessary...
The OptiClimate water cooled air conditioner is equipped with an active carbon filter cloth, which constantly odors particles from the air to prevent any odors. The OptiClimate water cooled air will come standard with a carbon filter cloth, which must be replaced every six months in order to guarantee the best quality...
With the waterstroke damper you catch pressure differences in the water. By stopping or initiating a flow of water it causes a pressure difference which will be absorbed by the waterstroke damper...
The OptiClimate is controlled by the standard included remote control. The extensive remote control is also a controller that runs all processes automatically and is easy to follow. After the remote has been set to the minimum temperature (night), maximum temperature (day), the Opticlimate will heat or cool depending on the day or night time...
Head up to 4 meters. The connection is suitable for 7/4MM PVC hose. This pump is needed if the OptiClimate is lower than the drain and condensation water can not flow away from the slope...
The evaporative cooler can drain water from the OptiClimate cool and ready for re-use. The hot water outlet (50 ° Celcius) is cooled, so it can be re-used directly as cooling medium...
Most humidifiers do not support integrated scale filter, whereby the lime particles are not removed. Out of the mist In combination with a Opticlimate there is a chance that this lime particles precipitate in the engine, leading to faster wear.
Through this external water filter, you can be sure that all lime particles are removed before the spray is released...
OptiClimate Plenumbox 3500 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 3500 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 3500 PRO3
Dimensions: 480 x 399mm
Flange: 250 mm
Especially for: Dual-Room s..
OptiClimate Plenumbox 6000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 6000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 6000 PRO3
Dimensions: 597 x 497mm
Flange: 250 mm
Especially for: Dual-Room s..
OptiClimate Plenumbox 10000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 10000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 10000 PRO3
Dimensions: 688 x 497 mm
Flange: 355 mm
Especially for: Dual-Ro..
OptiClimate Plenumbox 15000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 15000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 15000 PRO3
Dimensions: 890 x 538 mm
Flange: 355 mm
Especially for: Dual-Ro..
OptiClimate CO2 pressure reducing valve for gas cylinders. This product is of industrial grade quality and has large, easily legible pressure gauges. It is equipped with a high-quality magnetic valve that does not buzz or vibrate. Provided with fine adjustment in increments of 1-30L/min for accurately controlling the climate of any room, large or small. Cheaper valves often have no fine adjustment and are fixed at 15L/min, creating peaks in CO2 level..
OptiClimate 3500 PRO4 watercooled aircon.
The OptiClimate 3500 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 3,5 kW
Dimensions: 870 x 630 x 405 mm
Weight: 58 kg
Water usage: 1 up to 2 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 2x1500W
Phase: 1 - 3
Split Unit: ..
OptiClimate 6500 PRO4 Watercooled Aircon.
The OptiClimate 6500 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 6 kW
Dimensions: 990 x 760 x 505 mm
Weight: 85 kg
Water usage: 2 up to 4 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1500W
Phase: 1 - 3
Split Unit: No..
OptiClimate 10000 PRO4 Watercooled Aircon.
The OptiClimate 10000 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 10 kW
Dimensions: 1050 x 800 x 505 mm
Weight: 125 kg
Water usage: 3 up to 6 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1200W
Phase: 1 - 3
Split Uni..
OptiClimate 15000 PRO4 Watercooled Aircon.
The OptiClimate 15000 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 15 kW
Dimensions: 1230 x 900 x 545 mm
Weight: 165 kg
Water usage: 5 up to 9 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2700W
Phase: 3
Split Unit: N..
OptiClimate 3500 PRO4 Split air-cooled Aircon.
The OptiClimate 3500 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 3.5 kW
Dimensions: 870 x 630 x 405 mm
Weight: 58 kg
Voltage: 230V
Power consumtion: 820W
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 2x1500W
Phase: 1 - 3
Split Unit: Yes
Extended Re..
OptiClimate 6000 PRO4 Split air-cooled Aircon.
The OptiClimate 6000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 6 kW
Dimensions: 990 x 760 x 505 mm
Weight: 85 kg
Power Consumption: 1590W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1500W
Phase: 1 - 3
Split Unit: Yes
Extended Re..
OptiClimate 10000 PRO4 Split air-cooled Aircon.
The OptiClimate 10000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 10 kW
Dimensions: 1050 x 800 x 505 mm
Weight: 125 kg
Power Consumption: 2390W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2000W
Phase: 1 - 3
Split Unit: Yes
Extend..
OptiClimate 15000 PRO4 Split air-cooled Aircon.
The OptiClimate 15000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 15 kW
Dimensions: 1230 x 900 x 545 mm
Weight: 165 kg
Power Consumption: 3500W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2700W
Phase: 1 - 3
Split Unit: Yes
Extend..
OptiClimate CO2 Monitor with humidity (RH) and temperature sensor. The OptiClimate CO2 Monitor clearly indicates the CO2 level in the room. This device is also equipped with a humidity sensor and a temperature sensor. Furthermore, these values are clearly readible in the digital display of the CO2 monitor. This CO2 monitor can only be used as a reference, and has no adjustment options...
OptiClimate CO2 Sensor for Maxi Controller Gas Protect. Separate OptiClimate CO2 sensor that can be connected to the Maxi Controller, and which also controls the CO2 generator or CO2 pressure reducing valve. The sensors use the Dual Beam NDIR technology which delivers unprecedented calibration stability and accuracy. Other CO2 sensors are Single beam and need to be regularly calibrated. Dual Beam sensors are two sensors in one where the measuring sens..
A separate OptiClimate CO2 sensor that can be connected to the DimLux Controller, and which also controls the CO2 generator or CO2 pressure reducing valve. The sensors use the Dual Beam NDIR technology which delivers unprecedented calibration stability and accuracy. Other CO2 sensors are Single beam and need to be regularly calibrated. Dual Beam sensors are two sensors in one where the measuring sensor is periodically adjusted by the second sensor. Be..
OptiClimate three-way valve 250mm is suitable for the OptiClimate 3500, 6000 PRO3 and PRO4.
This three-way valve for the OptiClimate 3500, 6000 PRO3 and PRO4 should be used within the Dual Room setup: only one OptiClimate will be required to cool two rooms. However, an additional temperature sensor is required which you can order here as well...
OptiClimate 355mm three-way valve is suitable for the OptiClimate 10000, 15000 PRO3 and PRO4.
The three-way valve is used within the Dual Room System. Using the Dual Room System, only one OptiClimate will be required to cool two rooms. However, an additional temperature sensor is required. When used with the three-way valve, the night-time heating and dehumidifying function is cancelled...
OptiClimate damping plates with adhesive layer. These damping plates are specifically designed for all versions of the OptiClimate watercooled airco and ensure extra damping and a quieter system. 2 pieces...
OptiClimate Thermal Vapour Barrier Film (25 x 1.5m roll). The OptiClimate thermal vapour barrier reflective film is well suited to isolate and reflect an area all along. Due to the bubble profile all the heat stays inside the area. This product is best to combine with the aluminum reflective tape. 25 x 1.5m roll...
The OptiClimate Auto Pilot Natural Gas (NG) 4KW CO2 generator works without a pilot burner with electric ignition, and has the added benefit of lower gas consumption, however, it is less suitable for smaller spaces as it is not adjustable. This 4KW model is suitable for 16 to 30 m2 spaces, depending on the extraction efficiencies. For larger spaces, we recommend that several heaters be used in different areas of the space, ideally with a CO2 generato..
The OptiClimate Auto Pilot Natural Gas (NG) 8KW CO2 generator works without a pilot burner with electric ignition, and has the added benefit of lower gas consumption, however, it is less suitable for smaller spaces as it is not adjustable. This 8KW model is suitable for 32 to 60 m2 spaces, depending on the extraction efficiencies. For larger spaces, we recommend that several heaters be used in different areas of the space, ideally with a CO2 generato..
The OptiClimate Auto Pilot 4KW CO2 generator works without a pilot burner but with an electric ignition, and has the added benefit of lower gas consumption, however, it is less suitable for smaller spaces as it is not adjustable. The 4 KW model is suitable for 16 to 30 m2 rooms, depending on the extraction efficiencies. For larger rooms, we recommend that several heaters be used in different areas of the space, ideally with a CO2 generator for each Op..
The OptiClimate Auto Pilot Propane (LPG) 8KW CO2 generator works without a pilot burner with electric ignition, and has the added benefit of lower gas consumption, however, it is less suitable for smaller spaces as it is not adjustable. The 8 KW model is suitable for 32 to 60 m2 rooms, depending on the extraction efficiencies. For larger rooms, we recommend that several heaters be used in different areas of the space, ideally with a CO2 generato..
The Biogreen CO2 generator comes with a pilot burner. The capacity control is infinitely variable from 0.75 to 4.5 kW. An advantage of the infinitely variable control is that the generator's capacity can be adjusted to the specific requirements of the room, whereas fixed-capacity generators trigger peaks in the CO2 output.
During the growth period, the pilot burner supplies just enough CO2 to supplement the CO2 in the growing environment. The ..
CO2 Generator BioGreen Propane (LPG) 1-4KW. The Biogreen CO2 generator comes with a pilot burner. The capacity control is infinitely variable from 0.75 to 4.5 kW. An advantage of the infinitely variable control is that the generator's capacity can be adjusted to the specific requirements of the room, whereas fixed-capacity generators trigger peaks in the CO2 output.
During the growth period, the pilot burner supplies just enough CO2 to supplem..
This special air distribution hose is made of high quality anti-static white LDPE film with a thickness of 180 Mu. There are round holes punched in an area of 120˘Ş. As a result, the air is directed to 1/3 of the circle and the air at a high velocity is blown out. As use is made of white film, the air distribution hose is light reflective...
The connection set comes standard with the OptiClimate. Separately available connection sets typically consists of:
Magnetic valve
LDPE connectors
Vibration insulating rubbers with mounting hardware
Condensate water connecting nipple
Teflon tape
Adhesive gel to prevent connectors from loosening over time
7m cord for securing the circuit board, and operating instructions..
The flanges are provided with screw holes, which can also be used to secure the flange against a surface. The hose connection is tapered for easy installation. The flanges are available in four different diameters, but each flange also comes in one or more smaller sizes.
Flange code information: The first number indicates the diameter of the filter on which the flange can be mounted. The second number is the diameter of the flange connectio..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain t..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
This version can be wired single or 3 phase.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical me..
This version can be wired single or 3 phase.
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their ..
OptiClimate 15000 PRO4 Split air-cooled Aircon.
The OptiClimate 15000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 15 kW
Dimensions: 1230 x 900 x 545 mm
Weight: 165 kg
Power Consumption: 3500W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2700W
Phase: 1 - 3
Split Unit: Yes
Extend..
Small and lightweight water chiller, ideal for small spaces in residential and commercial buildings.
OptiClimate Compact Ultra Vertical Water Cooler Specifications:
Capacity: from 4 to 53 kW
Tube diameter:3/8" smooth inner surface (S) and grooved inner surface (R)
Fin spacing:2,1 mm
Fan motor diameters:350 mm - 4 and 6 poles
Available number of fan motors:from 1 to 2x3 fan motors
4.5KW Specifications:
Weight: 7 KG
Dimensions (mm..
Solid water chiller, with a large cooling capacity.
12 kW, 17 kW and 32 kW - Vertical position.
Additional Information:
Capacity:from 14 to 280 kW
3/8" tube diameter: grooved inner surface and high-efficiency fin with 2..1 mm spacing for turbo models
3/8" tube diameter: smooth inner surface and corrugated fin with 2.1 mm spacing for standard models
Fan motor diameters: 450 mm, 500 mm and 630 mm - 4 poles, 6 poles and 12 poles
Available nu..
Solid water chiller, with a large cooling capacity.
Addition Information:
3/8" tube diameter:grooved inner surface and high-efficiency fin with 2..1 mm spacing for turbo models
3/8" tube diameter: smooth inner surface and corrugated fin with 2.1 mm spacing for standard models
Fan motor diameters:800 mm and 910 mm - 6 poles, 8 poles and 12 poles
Available number of fan motors:from 1 to 2x5 fan motorsSpecifications:Weight: 125KGDimensions (mm)..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
This kit contains 2 x elbow pieces that connect to your Opticlimate and allow the fitting of speedfit pipe. It also contains the fittings for the leak detector shut-off valve.
Selected to fit your Opticlimate
Fits every size of Opticlimate
Allows you to connect to speedfit pipe for easy installation
For use with 15mm pipe
Kit Contains:
2 x elbow fittings with speedfit connectors (inlet and drain)
2 x coupler fittings for the auto-off valve (wit..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
The RevomaxII is a climate control system with our new Infinity DC inverter technology, which has the broadest capacity range of all existing air conditioning units. We can go as low as 20-30% cooling capacity where other products can only go as low as 60%. This results in a super stable climate no matter if the customer installed less fixtures than optimum.
Super stable humidity. With the RevomaxII, the humidity will be within ±4%RH from the set-point (f..
Ex-Demo - 1 Hour of Use - 2 Available
Brand new price: £3111.48
Ex-Demo price: £2489
Small and lightweight water chiller, ideal for small spaces in residential and commercial buildings.
OptiClimate Compact Ultra Vertical Water Cooler Specifications:
Capacity: from 4 to 53 kW
Tube diameter:3/8" smooth inner surface (S) and grooved inner surface (R)
Fin spacing:2,1 mm
Fan motor diameters:350 mm - 4 and 6 poles
Available number of fan motors:from 1 ..