Efficiency and uniformity have been the main focus in the development of the Flowers-only reflector. Each ray of light coming from the lamp will either be transmitted directly to the plants or will only hit the 99.99% pure aluminium once before being transmitted to the plant. The unique design of the DLI reflector and the high uniformity of the light the reflector projects results in less hotspots on the canopy and a more even plant growth.
The DLI reflec..
A replacement Golf Filter Case Only – The 9mm or 6mm Golf Filter is for use with 30 L & 47 L plastic reservoirs. It is inserted into the pipe end inside the reservoir once the pipe is pushed through the Top Hat Grommet. It can be easily serviced and will float to the top if it comes detached from the tube, this will not happen if you make sure you have pushed the filter firmly into the tube...
The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only.
Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sen..
Nanolux LEDex Series Fixtures are designed for full-cycle commercial cultivation that features many advantages compared with traditional light sources, bringing new efficiencies for your grow facility that weren’t possible before. This technology is revolutionizing the horticultural lighting industry in both lowering electric usage and increasing overall crop yield.
Nanolux distributes the 110W bars individually in case quantities. This allows you to utili..
Nanolux LEDex Series Fixtures are designed for full-cycle commercial cultivation that features many advantages compared with traditional light sources, bringing new efficiencies for your grow facility that weren’t possible before. This technology is revolutionizing the horticultural lighting industry in both lowering electric usage and increasing overall crop yield.
Nanolux distributes the 110W bars individually in case quantities. This allows you to utili..
Nanolux LEDex Series Fixtures are designed for full-cycle commercial cultivation that features many advantages compared with traditional light sources, bringing new efficiencies for your grow facility that weren’t possible before. This technology is revolutionizing the horticultural lighting industry in both lowering electric usage and increasing overall crop yield.
Nanolux distributes the 110W bars individually in case quantities. This allows you to utili..
The AMP-3 Sensor Board can be used as a bridge between the sensors (pH Sensor & EC/Temp Sensor) and the Aqua-X Pro Controller. It is specially designed for the Aqua-X Pro system. It can be connected to the main controller with a standard RJ12 cable.
Multiple units can be connected into one system for multiple monitoring applications.
The pH level, EC level and water temperature will be displayed on its LCD screen and the Aqua-X Pro master controller ..
The DFM-1 is a 1" digital inline flow meter provides accurate measurements of water or a nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system. When it’s used with the Aqua-X Pro, users can set the irrigation schedule to be controlled “By volume”, and the DFM-1 will measure and allow the desired and precise amount of nutrient solution to be used. The DFM-1 sensor can also be used for future functions and may inc..
3-in-1 Temp/Humid/Light sensor for the Hydro-X system.
Note: This is a replacement or spare part. The main controller comes with a sensor already.
"Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
Features:
Built-In Photocell Detecting Day/Night Mode
Plug & Play
Specifications:
Output Voltage: 0~11.5V
Maximum Current: 0.2A
Wor..
The Gentle Cut Bucker Stand from Centurion allows the user to make the most of their processing time with the added ease of de-stemming and the added portability.
Durability
The Gentle Cut Bucker Stand from Centurion is made from the highest quality materials that include industrial casters.
Dimensions:
Height: 113
Length: 122
Width: 105
Please note: this item is the stand only...
The HI-98199 is a versatile meter that can monitor pH, EC, and dissolved oxygen when paired with the respective probe. Hanna’s pH probe is included with the HI-98199 and the EC and DO probes can be ordered separately.
Dissolved Oxygen
pH
The HI-98199 allows for the measurement of pH and temperature when used with the included HI-829113 digital pH probe.
Up to a three-point calibration with five standard buffers and one custom buffer available
pH ..
Efficiency and uniformity have been the main focus in the development of the Flowers-only reflector. Each ray of light coming from the lamp will either be transmitted directly to the plants or will only hit the 99.99% pure aluminium once before being transmitted to the plant. The unique design of the DLI reflector and the high uniformity of the light the reflector projects results in less hotspots on the canopy and a more even plant growth.
The DLI reflec..
A replacement Golf Filter Case Only – The 9mm or 6mm Golf Filter is for use with 30 L & 47 L plastic reservoirs. It is inserted into the pipe end inside the reservoir once the pipe is pushed through the Top Hat Grommet. It can be easily serviced and will float to the top if it comes detached from the tube, this will not happen if you make sure you have pushed the filter firmly into the tube...
The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only.
Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sen..
Nanolux LEDex Series Fixtures are designed for full-cycle commercial cultivation that features many advantages compared with traditional light sources, bringing new efficiencies for your grow facility that weren’t possible before. This technology is revolutionizing the horticultural lighting industry in both lowering electric usage and increasing overall crop yield.
Nanolux distributes the 110W bars individually in case quantities. This allows you to utili..
Nanolux LEDex Series Fixtures are designed for full-cycle commercial cultivation that features many advantages compared with traditional light sources, bringing new efficiencies for your grow facility that weren’t possible before. This technology is revolutionizing the horticultural lighting industry in both lowering electric usage and increasing overall crop yield.
Nanolux distributes the 110W bars individually in case quantities. This allows you to utili..
Nanolux LEDex Series Fixtures are designed for full-cycle commercial cultivation that features many advantages compared with traditional light sources, bringing new efficiencies for your grow facility that weren’t possible before. This technology is revolutionizing the horticultural lighting industry in both lowering electric usage and increasing overall crop yield.
Nanolux distributes the 110W bars individually in case quantities. This allows you to utili..
The AMP-3 Sensor Board can be used as a bridge between the sensors (pH Sensor & EC/Temp Sensor) and the Aqua-X Pro Controller. It is specially designed for the Aqua-X Pro system. It can be connected to the main controller with a standard RJ12 cable.
Multiple units can be connected into one system for multiple monitoring applications.
The pH level, EC level and water temperature will be displayed on its LCD screen and the Aqua-X Pro master controller ..
The DFM-1 is a 1" digital inline flow meter provides accurate measurements of water or a nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system. When it’s used with the Aqua-X Pro, users can set the irrigation schedule to be controlled “By volume”, and the DFM-1 will measure and allow the desired and precise amount of nutrient solution to be used. The DFM-1 sensor can also be used for future functions and may inc..
3-in-1 Temp/Humid/Light sensor for the Hydro-X system.
Note: This is a replacement or spare part. The main controller comes with a sensor already.
"Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
Features:
Built-In Photocell Detecting Day/Night Mode
Plug & Play
Specifications:
Output Voltage: 0~11.5V
Maximum Current: 0.2A
Wor..
The Gentle Cut Bucker Stand from Centurion allows the user to make the most of their processing time with the added ease of de-stemming and the added portability.
Durability
The Gentle Cut Bucker Stand from Centurion is made from the highest quality materials that include industrial casters.
Dimensions:
Height: 113
Length: 122
Width: 105
Please note: this item is the stand only...
The HI-98199 is a versatile meter that can monitor pH, EC, and dissolved oxygen when paired with the respective probe. Hanna’s pH probe is included with the HI-98199 and the EC and DO probes can be ordered separately.
Dissolved Oxygen
pH
The HI-98199 allows for the measurement of pH and temperature when used with the included HI-829113 digital pH probe.
Up to a three-point calibration with five standard buffers and one custom buffer available
pH ..