Search
Search
Product Compare (0)
Superpro AC-1 Analogue Atmosphere / CO2 Controller
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy. AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on. Note: CO2 levels must be measured and regulated by user. Modes Mode A: LOWER temperature and DECREASE humidity indepen..
£385.95
Ex Tax:
Superpro DDAC-1 Deluxe Digital Atmosphere / CO2 Controller
The Superpro DDAC-1 receives information from the sensors and activates external fans, air conditioners, dehumidifiers, heaters, and CO2 equipment as needed to maintain optimum levels for indoor agriculture. Until now, this simple idea was easier said than done. A 15-amp / 120 or 10-amp / 240 vot circuit breaker and heavy-duty internal construction ensures that the unit will operate for years without fail. We only use high-quality UL / CE listed component..
£825.95
Ex Tax:
Dimlux Maxi Controller
The Maxi Controller can adjust the output according to the ambient temperature: the lamps are dimmed automatically when the temperature exceeds a maximum pre-defined level. Using the DimLux with a Maxi Controller enables you to plug the DimLux directly into a wall socket without needing an intervening relay, time delay unit or time switch – which saves you costs. A DimLux controlled by a Maxi Controller is the only (digital) ballast that does not need to..
£274.95
Ex Tax:
Bluelab Guardian Monitor
In just one glance it magically measures all 3 critical parameters for successful growth; pH, conductivity AND temperature. The Bluelab Guardian Monitor is a constant indicator of the desired levels of EC/ppm 700/TDS/CF, pH and temperature, enabling the grower to optimise these parameters as the crop progresses through each growing phase. The Bluelab Guardian Monitor is mains powered and is mounted to the wall or hung on a support and the probes..
£352.95
Ex Tax:
Superpro CO2 PPM Controller - CARBON-B1
The CARBON -B1 is designed to cost-effectively control the CO2 level inside a growing area. An extremely accurate NDIR CO2 PPM sensor (part-per-million meter) is combined with a digital microprocessor to create an accurate and simple method to control supplemental CO2 use in a greenhouse. The unit can control CO2 levels up to 2500PPM. The user selects the desired CO2 level to be maintained. A built-in photocell automatically activates the unit only during..
£385.95
Ex Tax:
BZ25 CO2 Air Quality Monitoring Device
CO2-Sensor: NDIR sensor (non-dispersive infrared) Carbon dioxide measuring range: 0 to 9,999 ppm CO2 Carbon dioxide resolution (accuracy): 1 ppm (±75 ppm or ±5 % of the measuring value) Temperature measuring range: -5 °C to +50 °C Temperature resolution (accuracy): 0.1 °C (±0.5 °C) Relative humidity measuring range: 0.1 % RH to 99.9 % RH Relative humidity resolution (accuracy): 0.1 % RH (max. ±3 % RH) Measuring interval: 2 seconds Memory: 50,000 me..
£170.95
Ex Tax:
BZ30 CO2 Air Quality Data Logger
CO2-Sensor: NDIR sensor (non-dispersive infrared) Carbon dioxide measuring range: 0 to 9,999 ppm CO2 Carbon dioxide resolution (accuracy): 1 ppm (±75 ppm or ±5 % of the measuring value) Temperature measuring range: -5 °C to +50 °C Temperature resolution (accuracy): 0.1 °C (±0.5 °C) Relative humidity measuring range: 0.1 % RH to 99.9 % RH Relative humidity resolution (accuracy): 0.1 % RH (max. ±3 % RH) Measuring interval: 2 seconds Memory: 50,000 me..
£203.95
Ex Tax:
CO2 Monitor / Controller / Sensor
The GI professional CO2 monitor/controller combines the very latest technology with plug and play operation. We have added a photosensor to detect light and dark, this automaticaly changes the working mode of the controller. Other features include: fully adjustable between 0-2000ppm, wall mountable, extremely accurate external sensor with 3 meter cable & automatic calibration. The GI controller can be used with CO2 generators, CO2 injection devices, s..
£145.95
Ex Tax:
CO2 Monitor and Doser - Computer Controlled Complete
The Ultimate CO 2 Controller. • Simple to use. • Four separate modes of operation. • Can be used with or without Analyser. • Latest Microprocessor technology. • Intelligent Multi Stage CO 2 dosing. • Wall mountable. • User friendly. • Full 1 year warranty. • Low Cost Carbon Dioxide is one of the most important factors in an indoor growroom or glass house. Photosynthesis is the term used to describe the process by which plants combine CO 2 molecul..
£659.95
Ex Tax:
Harvest Master CO2 Easi
A simple to use, innovative CO² sensor and controller, the Harvest Master CO² Easi Controller monitors the growing environment of your grow room – vital for healthy plant growth! The operation of CO2 EASi. CO2 EASi is intelligent control of CO2 and at the same time, an Intelligent Temperature controller when the COOL KIT is attached. In Light ON periods (Day): The controller will try to maintain Max co2 high PPM for the longest duration. It aggressively..
£768.95
Ex Tax:
Superpro D1-PPM Digital CO2 Controller
(European version: requires plug adapter) The D1-PPM Carbon Dioxide controller provides high-end performance, at economy pricing. Starts by using a highly accurate NDIR CO2 sensor. The CO2 Sensor is located in a remote sensor enclosure that can be positioned up to 5 meters from the main controller. Included inside the remote sensor enclosure is also a photocell which will detect light levels to activate the CO2 control function ONLY when desired by the ..
£440.95
Ex Tax:
Guardian Monitor Connect pH/EC/Temp
New Version now available - Click Here The Bluelab Guardian Monitor Connect is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark fo..
£407.95
Ex Tax:
Bluelab pH Controller Connect - Monitor & Doser
Clever monitoring, dosing and data logging of solution pH levels. Made easy. Sometimes the more you know, the better. And when it comes to managing the pH of your nutrient solution, exact knowledge makes a world of difference. Our brainy pH controller connect constantly monitors and fine-tunes the pH levels for you. But more than that, it wirelessly data logs to your computer too, putting continuous information at your fingertips. Use the data to make sy..
£635.95
Ex Tax:
Humidistat HR-DHTC
The Faran HR Digital Humidity and Temperature Control (HR-DHTC) is a superb environmental controller and is ideal for maintaining a perfect climate for your plants. Environmental control should be first on the list when growing indoors, when using hydroponics the HR-DHTC takes much of the micromanagement out of humidity control to make it easier for you to focus on other important areas of your grow room. There is a close relationship between the tempera..
£214.95
Ex Tax:
Waterproof pH/EC PCTestr 35
Basic multi parameter measurements on the go is so easy! Eutech's Testr 35 multi-parameter series allows you to measure pH conductivity and temperature with just one handy instrument. Made to fit your pocket both in size and budget. pH Range: 0.0 to 15.0 pH pH Resolution: 0.1 pH pH Accuracy: ±0.1 pH EC Range: 0.0 to 199.99uS/200/1999uS/2.00mS to 20.mS EC Resolution: 0.1uS/1uS/0.01mS EC Accuracy: ±0.1 % Temperature coefficient: 0.0 to 10.0%/Degree ..
£171.95
Ex Tax:
Professional Nutrient Management Kit
Kit includes: pHTestr 10 ECTestr 11 pH Buffer 4 pH Buffer 7 Conductivity (EC) Standard Replacement Batteries and Carry Case..
£241.95
Ex Tax:
Waterproof EcoTestr EC High
The Eutech EcoTestr EC High comes with rugged, sturdy stainless steel pin sensors, giving you quick, reliable measurements in a wide variety of applications. Ideal for use in hydroponics and other water applications. Range: 0.0 to 19.90mS Resolution: 0.1 mS Accuracy: ±0.1 % (±0.2 above 10 mS) Calibration: 1 points Automatic Temperature Compensation: Yes Non-Volatile Memory: Yes Hold Function: Yes Auto-Off: 8.5 minutes after last key press LCD di..
£63.95
Ex Tax:
Waterproof pHTestr 10
pH measurement has never been easier with the pH Testr 10. Accurate, handy and user friendly, the pH Testr 10 is the best pocket tester in its class. Range: 0.0 to 15.0 pH Resolution: 0.01 pH Accuracy: ±0.01 pH Calibration: Up to 3 points (4.0,7.0 or 10) Auto Buffer Recognition. Automatic Temperature Compensation: Yes Non-Volatile Memory: Yes Hold Function: Yes Auto-Off: 8.5 minutes after last key press (Can be disabled) LCD display: Custom Dual..
£115.95
Ex Tax:
Waterproof EcoTestr pH 1
Economical pH measurements is a breeze with the EcoTestr pH 1. Designed for fuss free measurements on the go. the EcoTestr pH 1 is ideal for quick pH measurements in hydroponic gardening, aquaculture and agriculture. Range: 0.0 to 14.0 pH Resolution: 0.1 pH Accuracy: ±0.1 pH Calibration: Up to 3 points (4.0,7.0 or 10) Auto Buffer Recognition. Non-Volatile Memory: Yes Hold Function: Yes Auto-Off: 8.5 minutes after last key press LCD display 31/2 d..
£61.95
Ex Tax:
Waterproof EcoTestr pH 2
Economical pH measurements is a breeze with the EcoTestr pH2. Designed for fuss free measurements on the go. the pH 2 is ideal for quick pH measurements in hydroponic gardening, aquaculture and agriculture. Range: 0.0 to 14.0 pH Resolution: 0.1 pH Accuracy: ±0.1 pH Calibration: Up to 3 points (4.0,7.0 or 10) Auto Buffer Recognition. Automatic Temperature Compensation: Yes Non-Volatile Memory: Yes Hold Function: Yes Auto-Off: 8.5 minutes after las..
£72.95
Ex Tax:
Waterproof ECTestr 11
Combining the ranges of thee testers into one, the Eutech multi-range EC Testr 11 now measures a wider conductivity range. User friendly features such as simultaneous temperature display, auto-ranging option, adjustable TDS factor and automatic temperature compensation make EC measurement on the go quick and easy! Range: Dual Range 0.0 to 2000uS/0.0 to 20.00ms Resolution: 0.1uS/1uS/0.01mS Accuracy: ±1% Full Scale Calibration: 2 points auto 2 point ma..
£109.95
Ex Tax:
Sensor for Eutech Waterproof PCTestr 35
Replacement pH/EC/Temp Sensor for PCTestr 35...
£57.95
Ex Tax:
OptiClimate CO2 Monitor with RH and Temperature Sensor
OptiClimate CO2 Monitor with humidity (RH) and temperature sensor. The OptiClimate CO2 Monitor clearly indicates the CO2 level in the room. This device is also equipped with a humidity sensor and a temperature sensor. Furthermore, these values are clearly readible in the digital display of the CO2 monitor. This CO2 monitor can only be used as a reference, and has no adjustment options...
£234.95
Ex Tax:
Conductivity Standard
Solutions of a known electrical conductivity (EC), used to check and calibrate EC meters. This should be a regular procedure to ensure best results from the meter. Available EC standard solutions: 1.413 mS/cm and 2.76 mS/cm..
£2.95
Ex Tax:
MW802 pH & Conductivity Combination Meter
3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! The MW802, with a conductivity range that goes up to 6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production. Soil and well water pH that is too acidic or alkaline can have an adverse effect on plant nutrient and water uptake and directly effect the efficiency of fertilizer, herbicides and pesticides. Soil Cond..
£363.95
Ex Tax:
pH Tester with 1 Point Calibration pH600
pH600 pH Economical Pocket Tester Milwaukee's economical testers are easy-to-use and low cost instruments to measure quick and reliable pH, EC or TDS values. Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions. All EC/TDS testers compensate for the temperatu..
£60.95
Ex Tax:
Conductivity Economical Pocket Tester CD611
Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions. All EC/TDS testers compensate for the temperature variance automatically. The CD611 is a Conductivity tester specifically designed for water analysis. The calibration procedure is very simple and fast. Thi..
£61.95
Ex Tax:
Growboss Nutrient Monitoring System
The Nutradip GrowBoss sets a new standard for Nutrient Monitoring, ease of use and affordability. The Nutradip Growboss is a nutrient monitoring system that assists growers in achieving maximum results for their growing efforts. The Growboss is a constant monitoring meter that indicates to the grower the exact levels of Nutrient strength, pH and temperature.This allows the grower to adjust and optimize each parameter as the crop progresses through each g..
£329.95
Ex Tax:
Autopilot CO2 Monitor & Logger
Developed to detect the presence of CO2 in ambient air, the Autopilot desktop CO2 monitor is smart, compact and easy to use. In addition to measuring the CO2 concentration, APCEM also measures the ambient temperature and the relative humidity. High quality LCD display. Independent CO2, RH and temperature readings. Calculates and displays ventilation rates. - Built in data logger can store 48 sets of CO2, temperature and humidity over 24 hours; one log ever..
£201.95
Ex Tax:
Hydromaster HM-500 Continuous pH/EC/TDS/Temp Monitor
HM-500: Continuous pH/EC/TDS/Temp Monitor hydromasterThe HM Digital HydroMaster (HM-500) monitors pH, Temp˚C/˚F, EC & TDS providing accurate, stable readings the user can rely on. The unit can be wall mounted, is portable thanks to its rechargeable battery, and can be used as a benchtop monitor with its stand. Continuous pH/EC/TDS/Temp Monitor Rechargeable battery RF Resistant Portable/Wall Mount/Benchtop Data Storage: Up to 20 measurement read..
£324.95
Ex Tax:
Hanna Groline Monitor HI-981420
Make your nutrient solution easy to manage with the GroLine Monitor and combined pH/EC/Temperature probe. Quick to setup and simple to use, the monitor was designed for hydroponics, aquaponics, and greenhouses. The HI-981420 GroLine Monitor provides 24 hour continuous monitoring of pH, conductivity (EC or TDS), and temperature in hydroponic nutrients. Results every 15 minutes . . . The GroLine Monitor automatically logs your results every 15 minutes ove..
£475.95
Ex Tax:
theMinder Remote Grow Room Monitor
theMinder is designed to help you track and manage your grow environment remotely from anywhere in the world. theMinder monitors and logs environmental data and alerts you when things start to go wrong so you can take the appropriate action. Better Yields & Returns Fine tune your environment to maximise output Avoid issues through early alerts KNOW MORE, GROW MORE Quick and Easy Less than 10 min to be up and running 3 Step process No app d..
£109.95
Ex Tax:
Mini CO2 Monitor
The Mini CO2 Monitor is a low-cost, compact and easy-to-use mini carbon dioxide and temperature meter. The CO2mini is easy to use: just plug it in to a PC or any USB port with the included cable and it will begin to measure air quality instantly. It has no moving parts, and is designed to last for years. Three LEDs - green, yellow and red - show overall air quality instantly, or you can read the CO2 and temperature levels on the large display.Specification..
£97.95
Ex Tax:
RAM CO2 Monitor and Controller
The RAM CO₂ monitor and controller has a range of features allowing easy monitoring and control of the CO₂ climate in your grow room. You can easily set a desired CO₂ range specifying a PPM limit either side of a desired target level. Offering a unique 2 in 1 system, the 24-hour CO₂ data log allows you to spot trends over a 24-hour period, leading to greater insight and a higher amount of control over your grow. Another key feature is the day/night sensor ..
£439.95
Ex Tax:
Bluelab Guardian Monitor Connect Inline
Monitor your key parameters 24/7 - Save time and effort with continuous monitoring With the Bluelab Guardian Monitor Connect Inline, you will be able to continuously monitor pH, EC and temperature in your nutrient feed line. There’s no need for manual spot checks; instead, you’ll ensure that your nutrient delivery system is working optimally at all times. That’s because when you track the three fundamental parameters of nutrient uptake, you’re able t..
£523.95
Ex Tax:
Milwaukee PH/EC Temp Monitor w/ Manual Calibration
Why Guard when you can Monitor! The Milwaukee MC810 MAX pH/EC/Temp. Monitor lets you monitor your pH/TDS/Temp levels 24/7 automatically. Comments From Field Testing “I run this unit 24/7 and have not had any problems for the past two months. I can monitor 24/7, point a camera on it and connect to my phone.” “Easy to calibrate.” “Using this now, far less expensive than what my friends paid … I recommend this to any serious grower.” Summary The MC811 ..
£248.95
Ex Tax:
Hanna Groline PH/EC/TDS/Temp Monitor
Quick to setup and simple to use, this monitor was designed with hydroponics, aquaponics, and greenhouses in mind. Make your nutrient solution easy to manage with the Groline monitor and combined pH/EC/temperature probe. Instantly view all measurements The versatile display of the Groline monitor allows for three screen modes. The LCD can display all three essential hydroponic nutrients measurements at one time, a 3-second cycle of single measurements, ..
£599.95
Ex Tax:
Essentials CO2 Monitor
The Essentials CO₂ Monitor is a user-friendly indoor air quality monitor, which detects CO₂ levels using a Non-Dispersive Infrared (NDIR) spectroscopic sensor. Its large-format display shows the real-time CO₂ level, ambient temperature and relative humidity, along with a clock and a bar-chart indicating how CO₂ levels have changed over the previous 24 hours. It can be set to give a green / amber / red backlight to indicate normal / raised / high levels of ..
£132.95
Ex Tax:Superpro AC-1 Analogue Atmosphere / CO2 Controller *SALE*
Was £350 - Now £300 The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy. AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on. Note: CO2 levels must be measured and regulated by user. Modes Mode A: LOWER temperature and DECR..
£330.95
Ex Tax:RAM CO2 Monitor and Controller *SALE*
Only 1 Available - Was £399.99 - Now £340 The RAM CO₂ monitor and controller has a range of features allowing easy monitoring and control of the CO₂ climate in your grow room. You can easily set a desired CO₂ range specifying a PPM limit either side of a desired target level. Offering a unique 2 in 1 system, the 24-hour CO₂ data log allows you to spot trends over a 24-hour period, leading to greater insight and a higher amount of control over your grow. A..
£374.95
Ex Tax:
Lo-Flo 3/4" Monitor Kit - Water-Powered Nutrient Delivery System
This Water-Powered Nutrient Delivery System Monitor Kit measures and displays the well-blended outgoing solution providing peace of mind. To complete the LO-FLO Nutrient Delivery System, you will also need Dosatron Injectors, the DAB Starter Kit or Standard Starter Kit, Mixing Chamber Kit(s), and the Water Hammer Arrestor Kit. Features: Union Close nipples Nipples Tee Pressure gauge tee Pressure gauge Cross Che..
£461.95
Ex Tax:
ControlLED Remote Sensor Temp. CO2 and Humidity Monitor Unit
ControlLED Dio-Tech Remote sensor - Temp. CO2 and Humidity plug in monitor Unit is a WIFI ready unit that only needs a power supply to work. The sensor connects up via point to point mesh Wifi technology directly to the controlLed controller which means much less mess when installing it into a grow room environment. Features WIFI Ready 3m power cable point to point mesh technology..
£88.95
Ex Tax:
Bluelab Guardian Monitor Inline Wi-Fi pH/EC/Temp
Always On. Being There Optional. Monitor your dosing pH, Conductivity and Temperature with alerts on your phone when using the Wi-Fi capable Bluelab Guardian Monitor Inline. Built-in Wi-Fi (with option to disable) High/low pH, temperature and conductivity alarms Non-volatile memory – keep settings through power loss Plant-safe green LEDs with adjustable display brightness 2 metre / 6.6 foot measurement probe ..
£522.95
Ex Tax:
Bluelab Guardian Monitor Wi-Fi pH/EC/Temp
Always On. Being There Optional. Monitor your reservoir pH, Conductivity and Temperature with alerts on your phone when using the Wi-Fi capable Bluelab Guardian Monitor. Built-in Wi-Fi (with option to disable) High/low pH, temperature and conductivity alarms Non-volatile memory – keep settings through power loss Plant-safe green LEDs with adjustable display brightness 2 metre / 6.6 foot measurement probe cables 110 – 240 VAC (Mains p..
£356.95
Ex Tax:
