This digital fan controller is a humidity and temperature dependent speed controller for rooms with intake and exhaust fans (2 x 600watt). The fan controller keeps the room humidity and temperature constant and under pressure to prevent odour from escaping.
A reliable fan controller complete with:
Sealed water resistant cover
Plugs with flap-lids and a low voltage sensor making it perfect for humid rooms.
Protection class IP44
Digital sensor supplie..
With an ever-changing and a somewhat erroneous climate – the traditional method of open-air cultivation is experiencing industry turbulence and there is emerging support for Closed Environment Agriculture (otherwise known as Closed Loop systems). A tried and tested technique in the North American market – our system enables the end user to maintain key growing factors within an isolated room space. These include maintaining optimal temperature*, relative h..
Our easy to install self fit air conditioner range are the ideal installation for a CGE (closed growing environment) where no extraction or inlet is used. We stock 12000BTU all the way through to 36000BTU units.
Grow all year round at the same temperature whilst using the Coolgen to easily maintain 1500ppm of CO2.
Inverter heat pump air conditioning is very energy efficient, it carries an "A" ENERGY RATING. Energy rating "A" is the most efficient. Heat p..
The Rapture 65L is a portable industrial dehumidifier for efficiently drying rooms during fire and flood restoration.
Features and benefits include hot gas bypass for low temperature defrost, humidistat as Standard 'to stop over drying', automatic pump out, easy to clean air filter, low noise and telescopic handle with semi-pneumatic wheels.
Features and Benefits
Hot gas bypass for low temperature defrost
Humidistat as standard "to s..
Recommended for rooms with up to 30 large plants or up to 60 small plants
Used in closed environment applications throughout the USA for years, and proven to stand up to the challenge of indoor growing conditions, these are the highest quality dehumidifiers available.
This model is the lower end and cheapest in the range, but don’t let that lead you to think it is an inferior product, these machines are all built to last and made with high quality compon..
Suitable for rooms with up to 25 large plants or up to 50 small plants
Used in closed loop applications all over the USA for years, and proven to stand up to the challenge of indoor growing conditions, these are the very best dehumidifiers around.
This model is the mid range model of the range, and has built in Humidistat control for maintaining your humidity exactly where you want it.
These dehumidifiers are all built to last and made with high qu..
Recommended for rooms with up to 40 large plants or up to 80 small plants
Used in closed environment applications throughout the USA for years, and proven to remain true to the challenge of indoor growing conditions, these are the highest quality dehumidifiers around.
This model is completely state of the art, a top end model in the range, and has built in Humidistat control for maintaining your humidity exactly where you require it, onboard softwa..
Recommended for grow rooms with up to 60 large plants or up to 120 small plants
Used in closed environment applications throughout the USA for several years, and proven to remain true to the challenge of indoor growing conditions, these are the very best quality dehumidifiers around.
This version is absolutely state of the art, a top end model in the range, and has built-in Humidistat control for maintaining your humidity precisely where you want i..
The most powerful water cooled split on the market, the MCSe14.6 takes everything the MCSe7.3 has to offer then doubles it. With a massive 14.6kW cooling duty, powerful EC fan technology and low GWP refrigerant combining to deliver cool air with maximum efficiency and minimum environmental impact.
As with the MCSe7.3 the MCSe14.6 doesn’t require any ducting and the main unit can be sited up to 35M from the outdoor section allowing it to be sited deep with..
To regulate and monitor air humidity. Measurement range 30 - 100% r.F., measurement accuracy ±3% r.F., operating range 35 - 100% r.F.
The HG 130 hygrostat is a bangbang servo designed to control the relative humidity of humidifiers and dehumidifiers in environments with temperatures between 0 to 60 °C.
Fields of application are, for example, humidity control in climate cabinets, offices and computer rooms, storage facilities for foodstuffs, alcohol and t..
The HotBox Superb is a 2.7kW electronic Fan Heater. With Winter and Summer settings, it can help to keep your glasshouse cool or warm depending on the season.
HotBox Superb Click for larger image
• Half and full heat settings ensures maximum fuel economy
• Fan only setting use purely for air circulation
• Fitted with feet and hanging loops easy to install in the optimum position
• High output fan (250cfm, 450m3/hr) removes air quickly and efficiently
..
Following into the footsteps of the Hotbox Superb, but by no means standing in its shadow.
The Hotbox Sirocco has all the advantages and privileges of being “born” into the established Hotbox fold, ie a modern design, accurate thermostatic control, a powerful 1.8kW motor as well as our standard 2 year guarantee.
25cm long
21cm diameter
Airflow 400m3/hr or 230cfm..
Up to 30m² coverage.
No plant can live without water, indeed most plants are composed mostly out of water and the health of a plant will depend directly on the relative Humidity of its surroundings.
Leaves lose water through evaporation through their stomata – small openings in special cells on the leaf surface where gaseous exchange takes place.
If the relative Humidity is too low, a plant will start to give up some of its water into the surrounding air..
Up to 150m² coverage.
No plant can live without water, indeed most plants are composed mostly out of water and the health of a plant will depend directly on the relative Humidity of its surroundings.
Leaves lose water through evaporation through their stomata – small openings in special cells on the leaf surface where gaseous exchange takes place.
If the relative Humidity is too low, a plant will start to give up some of its water into the surrounding ai..
To increase humidity in enclosed spaces you cannot improve on a purpose-designed humidifier. These little beauties are designed to increase humidity in growing areas and propagators.
Features
3.0 litre capacity
Ultrasonic Misting
Mist capacity adjustable..
To increase humidity in enclosed spaces you cannot improve on a purpose-designed humidifier. These little beauties are designed to increase humidity in growing areas and propagators.
Features
Ultrasonic misting
Mist capacity adjustable
Manual Hygrostat
4ltr water reservoir..
To increase humidity in enclosed spaces you cannot improve on a purpose-designed humidifier. These little beauties are designed to increase humidity in growing areas and propagators.
Features
Digital Thermo/Hygrostat
4 Mode settings/display
Mist intensity control
Time/timer setting
Humidity display
Room temperature display
Mist intensity display
Water scarce display
Time display
5ltr water reservoir..
Up to 150m² coverage.
One Humidifier, 3 settings. Choose from between 3, 5 or 6.5ltrs output by simply adjusting the housing.
No plant can live without water, indeed most plants are composed mostly out of water and the health of a plant will depend directly on the relative Humidity of its surroundings.
Leaves lose water through evaporation through their stomata – small openings in special cells on the leaf surface where gaseous exchange takes place.
If ..
Cool and Warm Mist Humidifier. Automatic humidity control. Transparent water tank: 7 l. Easy maintenance. Alarm for water refilling& tank cleaning.
- Suitable for rooms up to 50 sq. m
- Cool and Warm Mist Humidifier
- Automatic humidity control
- Transparent water tank: 7 l
- Easy maintenance
- Alarm for water refilling& tank cleaning
- Spray control function
- Digital display
- Vibration prevention mechanism
- Safety lock
- Max spray: Cool mist :..
Easy to use plug and play Hygrostat.
10 – 80% RH
Simply plug the Hygrostat into a socket, plug the Humidifier into the Hygrostat and set required humidity level...
These thermostatically controlled radiators gently heat your grow room without the worry of stripping the environment of humidity or for that matter adding humidity. Will not dry out the plants or the atmosphere unlike fan or convection heaters currently available.
2kw - 9 radiator panel and 2.5kw - 11 radiator panel versions available with adjustable thermostat, 3 heat settings, power indicator, 24 hour timer built-in, castors, carry handle and overheat ..
Cold winter weather can be as much of a problem for indoor gardeners as summer heat, so we are now stocking Hylite greenhouse heaters to keep the frost at bay.
Hylite have designed their heaters to offer a cheap-to-run alternative to fan heaters and cleaner alternative to paraffin. Using less than 50W per foot - about the same as a standard household light bulb - they are a cost effective way to avoid cold stress.
This new slimline range come complete wi..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The OptiClimate water cooled air conditioner is equipped with an active carbon filter cloth, which constantly odors particles from the air to prevent any odors. The OptiClimate water cooled air will come standard with a carbon filter cloth, which must be replaced every six months in order to guarantee the best quality...
The water-cooled air conditioning Opticlimate become standard with vibration rubbers. Attached to the Opticlimate these special insulation springs are designed on the weight of the Opticlimate and provide optimal insulation. These springs are mainly of interest in placing the Opticlimate on a solid surface, with installation on steel wire are not necessary...
The OptiClimate water cooled air conditioner is equipped with an active carbon filter cloth, which constantly odors particles from the air to prevent any odors. The OptiClimate water cooled air will come standard with a carbon filter cloth, which must be replaced every six months in order to guarantee the best quality...
Technical Specifications:
Supply voltage 230-240 Hz V/50/60
Power consumption (idle / active) ± 13 mA
Dim. (w x h x d) 100 x 90 x 210 mm
Contact Rating 230V 50/60Hz, max 16A resistive Load
Noise level (max. / Per channel) 80 dB / 1 m
Type of contact (NC / NO or both) Grounded power outlet, grounded connect..
With the waterstroke damper you catch pressure differences in the water. By stopping or initiating a flow of water it causes a pressure difference which will be absorbed by the waterstroke damper...
The OptiClimate is controlled by the standard included remote control. The extensive remote control is also a controller that runs all processes automatically and is easy to follow. After the remote has been set to the minimum temperature (night), maximum temperature (day), the Opticlimate will heat or cool depending on the day or night time...
Head up to 4 meters. The connection is suitable for 7/4MM PVC hose. This pump is needed if the OptiClimate is lower than the drain and condensation water can not flow away from the slope...
The evaporative cooler can drain water from the OptiClimate cool and ready for re-use. The hot water outlet (50 ° Celcius) is cooled, so it can be re-used directly as cooling medium...
Most humidifiers do not support integrated scale filter, whereby the lime particles are not removed. Out of the mist In combination with a Opticlimate there is a chance that this lime particles precipitate in the engine, leading to faster wear.
Through this external water filter, you can be sure that all lime particles are removed before the spray is released...
The XL Series Air Cooled Air Conditioning unit is Excel’s flagship product and is built from a Split System design.
The Split System design allows for the Indoor Air Handler to act as the blower inside while the Outdoor Condensing unit rejects indoor heat from the refrigerant to the fresh air outside. This unit comes equipped with Plug and Play fittings making it your best choice for quick and easy installations. The XL Series is available in sizes rangin..
The Stealth Series Air Cooled Air Conditioning unit is Excel’s newest product. It’s all in the name; the Stealth Series is based on a Triple Split Design which allows for the compressor to be removed from the Outdoor Condensing Unit and placed in it’s own sound deadened box, eliminating all compressor noise from the outdoors! The unit also comes with Plug and Play fittings making installations quick and simple. Available in sizes ranging from 2.0 TON (24,0..
The 5kW Heater is a great addition to any XL Series or Stealth Series Indoor Air Handler. Maintain nighttime or winter temperatures with ease. Just slide the heater into an access door already made specifically for the heater. Plug the plastic connector onto the control board and use your existing power to the Indoor Air Handler. Next is to set your heating point on your digital thermostat that came with the existing system then let it do its job!
Key Ben..
The Excel UV Air Purifier is designed to change the molecular structure of the contaminants through DNA Sterilization and Photo-Oxidation using UV-C (254nm), destroying both biological and chemical contaminants. It will kill mold, bacteria and viruses! Simply mount inside air handler or ductwork and easily wire the power supply to your existing 24v control board in your air handler.
Key Benefits
Destroy mold, bacteria and spores
Ozone Free
E..
A Damper Control Package is used to control the temperature in two rooms. Only one room per cycle will be controlled using only one Air Handler. There are two motorized dampers connected to the supply air and two motorized dampers connected to the return air. One set of dampers will be connected to Room 1 (Supply and Return) which will be configured as the “OPEN” state and one set of dampers will be connected to Room 2 (Supply and Return) which will be con..
The Excel Odor Eliminator is perfect for any area where extreme smell is an issue. Unlike other filters this multistage filter will remove the harshest smells, giving you peace of mind. Either place the two piece unit inside your area or easily duct to and from your room, ensuring thorough air circulation past the primary and secondary filters, then through the 5 trays of Custom Charcoal. Plug the bottom box blower into any 115V plug and it will start elim..
Ducting has never been easier with Excel Air Systems’ new fabric air duct. Simply run the included tension cable from one end of the room to the other and attach the 15’ section of fabric duct to the cable using the integrated clips. Using the supplied lock-down strap attach one end of the fabric duct to your top plenum on your Indoor Air Handler. It’s that easy! Additional duct lengths can be added using the ducts’ built-in zipper system. The kit comes as..
This pump allows condensation from the Indoor Air Handler to flow into the pump, then when the internal float raises the condensate water can be pumped a distance of 20’ along with the capability of 15’ vertically to a drain source. Comes with a 6’ electrical cord and 20’ 3/8 tubing. Available in 120/230V applications.
Key Benefits
Automatic operation
Collect condensation from multiple sources
Pump condensation anywhere..
The VAPOR-B1 is a humidity controller that can control either a dehumidifier or humidifier. Once the VAPOR-B1 is connected to a power source, and the humidification device is connected to the VAPOR-B1 power outlet, the device connected will be automatically controlled by the settings on the VAPOR-B1.
The user can choose to have different Day and Night humidity settings which will be automatically switched to the correct mode by the built-in photocell. The..
Greenhouse heater ideal for mini or lean-to greenhouses
To guard against frost damage.
Thermostatically controlled and will cut in when required, protecting your plants.
For safety the heating element is sheathed and all electrical connections are protected inside the enclosure at the end of the heater.
Floor or wall mounted.
Size 120mm. Diameter x 540mm.long.
1kW heater..
HOTBOX Elite greenhouse fan heater with heat output of 2.7kW. The thermostat control cuts the heat supply when the selected temperature is reached but allows the air fan to continue.
This updated model has a new ergonomic handle, wider legs for increased stability, rubberised flex and a thermal safety cut-out.
Fan heaters improve circulation and control the temperature, protecting against frost and cold weather.
The unit can be floor or bench mounted o..
HOTBOX Levant plus greenhouse heater has an output of 1.8kW, linked to a thermostat control which cuts the heat supply.
Fan heaters improve circulation and control the temperature, protecting against frost and cold weather.
These units can be used as fans in the summer months by switching off the heat unit.
They may be used in sheds, garages or conservatories and may be hung from the hooks and chains supplied.
Size 250mm. x 220mm. Diameter
Ideal for..
Electric convection Greenhouse heater.
Strong industrial grade sheet metal case powder coated.
Thermostatic control.
2200 Watts.
230V Supply 13A plug.
Ideal for up to 6 x 6 foot greenhouse.
Size 360mm. x 160mm. x 540mm high...
Provides a stable environment to protect plants against sudden temperature and humidity fluctuations.
Helps reduce humidity and condensation when growing indoors thus protecting against fungal attack.
Ideal in propagation areas where a constant ambient temperature is critical...
Temperature and Humidity alarm sensors for surveliance of the min. / max Temperature and Humidity.
The settings will be done over the GSM telephone. The sensor respond via SMS if the temperature or the Humidity is over/under the setting.
The sensor comes with 6m cable.
Sizes and technical data's:
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Humidity accuracy ±4.5%rh
..
Ideal for smaller grow tents or large propagator to maintain high levels of humidity.
This powerful and compact humdifier produces water vapour via ultrasonic vibration for a very fine micron size droplet correcting the humidity of the air dried out by central heating or environmental conditions associated with indoor growing. Each unit is cool running and gives 100% humidity. Mist Makers maintain the optimum growing environment required for cuttings..
Ideal for medium sized grow tents to maintain high level of humidity.
This powerful and compact humdifier produces water vapour via ultrasonic vibration for a very fine micron size droplet correcting the humidity of the air dried out by central heating or environmental conditions associated with indoor growing. Each unit is cool running and gives 100% humidity. Mist Makers maintain the optimum growing environment required for cuttings and seedlings a..
Quiet running small to medium room unit. Removes 750ml of moisture per day - ideal for using during the cropping phase of your growth cycle. 1.16 litre reservoir...
Mist Makers maintain the optimum growing environment required for cuttings and seedlings as well as growth through the vegetative stage of your plant cycle. Place in a large propagator or centre of the growroom and watch the vapour float around your cuttings producing rapid growth rates and delivering greater nutrient uptake along with nutrient transportation...
Mist Makers maintain the optimum growing environment required for cuttings and seedlings as well as growth through the vegetative stage of your plant cycle. Place in a large propagator or centre of the growroom and watch the vapour float around your cuttings producing rapid growth rates and delivering greater nutrient uptake along with nutrient transportation...
OptiClimate Plenumbox 3500 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 3500 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 3500 PRO3
Dimensions: 480 x 399mm
Flange: 250 mm
Especially for: Dual-Room s..
OptiClimate Plenumbox 6000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 6000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 6000 PRO3
Dimensions: 597 x 497mm
Flange: 250 mm
Especially for: Dual-Room s..
OptiClimate Plenumbox 10000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 10000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 10000 PRO3
Dimensions: 688 x 497 mm
Flange: 355 mm
Especially for: Dual-Ro..
OptiClimate Plenumbox 15000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 15000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 15000 PRO3
Dimensions: 890 x 538 mm
Flange: 355 mm
Especially for: Dual-Ro..
The Faran HR Digital Humidity and Temperature Control (HR-DHTC) is a superb environmental controller and is ideal for maintaining a perfect climate for your plants.
Environmental control should be first on the list when growing indoors, when using hydroponics the HR-DHTC takes much of the micromanagement out of humidity control to make it easier for you to focus on other important areas of your grow room.
There is a close relationship between the tempera..
Bergdorf Optima Features
Day & night recognition
No water required (at all)
Plug & play – (no engineer required)
Co2 diffuser ‐ (introduce co2 at plant canopy height)
Silent outdoor unit (this is the quietest unit on the market – by a huge margin!)
In‐built (replaceable) germicidal lamp (eradicate all contaminant issues)
Low current consumption (no ‘spike’ in electrical consumption)
R h control feature (‘dry’ operation mode)
In‐built act..
The Airsonic GS380 is equiped with a negative ion generating system to increase the diffusion’s quality and an adjustable potentiometer that allows control of the air flow for much precision. It also includes a mechanical hygrostat, automatic stop when tank is empty and is a very quiet performer.
Specifications
Watts: 50
Volts: 220/240
Litres per hour: 0.4
Size: 33x26x36cm
Capacity: 6 litres..
The innovative strength of the Climate Butler cannot only be found in its high efficiency and cost-effectiveness. It is also the result of the elimination of a counterproductive factor. If air is heated or cooled by a single air conditioning unit, humidity is instantly affected. The problem is that this effect can be detrimental. One air conditioning unit cannot dehumidify and heat air simultaneously, due to the fact that air conditioners dehumidify air by..
OptiClimate 3500 PRO4 watercooled aircon.
The OptiClimate 3500 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 3,5 kW
Dimensions: 870 x 630 x 405 mm
Weight: 58 kg
Water usage: 1 up to 2 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 2x1500W
Phase: 1 - 3
Split Unit: ..
OptiClimate 6500 PRO4 Watercooled Aircon.
The OptiClimate 6500 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 6 kW
Dimensions: 990 x 760 x 505 mm
Weight: 85 kg
Water usage: 2 up to 4 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1500W
Phase: 1 - 3
Split Unit: No..
OptiClimate 10000 PRO4 Watercooled Aircon.
The OptiClimate 10000 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 10 kW
Dimensions: 1050 x 800 x 505 mm
Weight: 125 kg
Water usage: 3 up to 6 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1200W
Phase: 1 - 3
Split Uni..
OptiClimate 15000 PRO4 Watercooled Aircon.
The OptiClimate 15000 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 15 kW
Dimensions: 1230 x 900 x 545 mm
Weight: 165 kg
Water usage: 5 up to 9 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2700W
Phase: 3
Split Unit: N..
OptiClimate 3500 PRO4 Split air-cooled Aircon.
The OptiClimate 3500 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 3.5 kW
Dimensions: 870 x 630 x 405 mm
Weight: 58 kg
Voltage: 230V
Power consumtion: 820W
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 2x1500W
Phase: 1 - 3
Split Unit: Yes
Extended Re..
OptiClimate 6000 PRO4 Split air-cooled Aircon.
The OptiClimate 6000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 6 kW
Dimensions: 990 x 760 x 505 mm
Weight: 85 kg
Power Consumption: 1590W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1500W
Phase: 1 - 3
Split Unit: Yes
Extended Re..
OptiClimate 10000 PRO4 Split air-cooled Aircon.
The OptiClimate 10000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 10 kW
Dimensions: 1050 x 800 x 505 mm
Weight: 125 kg
Power Consumption: 2390W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2000W
Phase: 1 - 3
Split Unit: Yes
Extend..
OptiClimate 15000 PRO4 Split air-cooled Aircon.
The OptiClimate 15000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 15 kW
Dimensions: 1230 x 900 x 545 mm
Weight: 165 kg
Power Consumption: 3500W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2700W
Phase: 1 - 3
Split Unit: Yes
Extend..
The DimLux humidity (RH) sensor displays the humidity on the DimLux Maxi Controller. If the RH sensor is connected, a humidifier can also be switched on with the DimLux Maxi Controller. An additional plant temperature sensor is required in order to calculated the Vapour Pressure Deficit (VPD). Comes with extra long 10m cable...
OptiClimate CO2 Monitor with humidity (RH) and temperature sensor. The OptiClimate CO2 Monitor clearly indicates the CO2 level in the room. This device is also equipped with a humidity sensor and a temperature sensor. Furthermore, these values are clearly readible in the digital display of the CO2 monitor. This CO2 monitor can only be used as a reference, and has no adjustment options...
OptiClimate three-way valve 250mm is suitable for the OptiClimate 3500, 6000 PRO3 and PRO4.
This three-way valve for the OptiClimate 3500, 6000 PRO3 and PRO4 should be used within the Dual Room setup: only one OptiClimate will be required to cool two rooms. However, an additional temperature sensor is required which you can order here as well...
OptiClimate 355mm three-way valve is suitable for the OptiClimate 10000, 15000 PRO3 and PRO4.
The three-way valve is used within the Dual Room System. Using the Dual Room System, only one OptiClimate will be required to cool two rooms. However, an additional temperature sensor is required. When used with the three-way valve, the night-time heating and dehumidifying function is cancelled...
OptiClimate damping plates with adhesive layer. These damping plates are specifically designed for all versions of the OptiClimate watercooled airco and ensure extra damping and a quieter system. 2 pieces...
OptiClimate Thermal Vapour Barrier Film (25 x 1.5m roll). The OptiClimate thermal vapour barrier reflective film is well suited to isolate and reflect an area all along. Due to the bubble profile all the heat stays inside the area. This product is best to combine with the aluminum reflective tape. 25 x 1.5m roll...
This special air distribution hose is made of high quality anti-static white LDPE film with a thickness of 180 Mu. There are round holes punched in an area of 120˘Ş. As a result, the air is directed to 1/3 of the circle and the air at a high velocity is blown out. As use is made of white film, the air distribution hose is light reflective...
The connection set comes standard with the OptiClimate. Separately available connection sets typically consists of:
Magnetic valve
LDPE connectors
Vibration insulating rubbers with mounting hardware
Condensate water connecting nipple
Teflon tape
Adhesive gel to prevent connectors from loosening over time
7m cord for securing the circuit board, and operating instructions..
The flanges are provided with screw holes, which can also be used to secure the flange against a surface. The hose connection is tapered for easy installation. The flanges are available in four different diameters, but each flange also comes in one or more smaller sizes.
Flange code information: The first number indicates the diameter of the filter on which the flange can be mounted. The second number is the diameter of the flange connectio..
Added humidity is often required by plants when growing indoors. It is particularly beneficial during the propagation and vegetative growth phase of a plants life.
These new units are easy to use ‘plug, fill and play.’
Adjustable dosing up to 250ml/hr lasting up to 16 hours.
Reliable, buy with confidence, 2 year warranty (doesn’t cover units using incorrect water.)
Only use Deionised, distilled or R.O. water with misters...
Added humidity is often required by plants when growing indoors. It is particularly beneficial during the propagation and vegetative growth phase of a plants life.
These new units are easy to use ‘plug, fill and play.’
Adjustable dosing up to 350ml/hr lasting up to 32 hours.
Reliable, buy with confidence, 2 year warranty (doesn’t cover units using incorrect water.)
Only use Deionised, distilled or R.O. water with misters...
Dimlux Temperature and Humidity Module
With the Dimlux Aux Box you can now manage your Temperature and humidity parameters.
The Auxbox is connected to the Dimlux Maxi Controller through the Auxiliary port on the unit with this module you can connect a heater/heating system, humidifier or dehumidifier to control the Relative humidity, Temp and RH Set points for both day and night operation within your micro climate...
This all-in-one sensor measures CO2, temperature, humidity and detects light simultaneously. Also, the sensor is equipped with a built-in calibration function to calibrate the CO2 sensor against outdoor air. The calibration menu is only accesible through a CO2 controller. Also equipped with a built-in switch to prevent unwanted calibration...
The EMS-Pro is the culmination of a lengthy research and development program at Ecotechnics, our design goal was to create a simple usb sensor to measure temperature, humidity & CO2 levels and to record them for later analysis.
Key features:
Plug and play USB sensor
Windows compatible
Realtime graphics display
Records all levels for graphing
1 year warranty..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain t..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
D1-HUM/Digital Humidity Controller
The D1-HUM Digital Day/Night humidity controller is a very accurate device that allows the user to control EITHER a humidifying or dehumidifying device.
A two meter long remote humidity sensor can be placed where it can sense the moisture level (rH) that the D1-HUM will be controlling.
The user first selects whether they are controlling a humidifying or dehumidifying device.
Feature with Day and Night humidity setti..
This EC fan controller with LCD display, keyboard and power led allows a very easy setting and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and rounds per minute of the exhaust fan. A built in light sensor in the probe recognize day/night modes.
The EC fan controller comes with power adaptor 1m cable, a 4m sensor cable and 2x 4m fan cable including all conn..
This digital fan controller is a humidity and temperature dependent speed controller for rooms with intake and exhaust fans (2 x 600watt). The fan controller keeps the room humidity and temperature constant and under pressure to prevent odour from escaping.
A reliable fan controller complete with:
Sealed water resistant cover
Plugs with flap-lids and a low voltage sensor making it perfect for humid rooms.
Protection class IP44
Digital sensor supplie..
With an ever-changing and a somewhat erroneous climate – the traditional method of open-air cultivation is experiencing industry turbulence and there is emerging support for Closed Environment Agriculture (otherwise known as Closed Loop systems). A tried and tested technique in the North American market – our system enables the end user to maintain key growing factors within an isolated room space. These include maintaining optimal temperature*, relative h..
Our easy to install self fit air conditioner range are the ideal installation for a CGE (closed growing environment) where no extraction or inlet is used. We stock 12000BTU all the way through to 36000BTU units.
Grow all year round at the same temperature whilst using the Coolgen to easily maintain 1500ppm of CO2.
Inverter heat pump air conditioning is very energy efficient, it carries an "A" ENERGY RATING. Energy rating "A" is the most efficient. Heat p..
The Rapture 65L is a portable industrial dehumidifier for efficiently drying rooms during fire and flood restoration.
Features and benefits include hot gas bypass for low temperature defrost, humidistat as Standard 'to stop over drying', automatic pump out, easy to clean air filter, low noise and telescopic handle with semi-pneumatic wheels.
Features and Benefits
Hot gas bypass for low temperature defrost
Humidistat as standard "to s..
Recommended for rooms with up to 30 large plants or up to 60 small plants
Used in closed environment applications throughout the USA for years, and proven to stand up to the challenge of indoor growing conditions, these are the highest quality dehumidifiers available.
This model is the lower end and cheapest in the range, but don’t let that lead you to think it is an inferior product, these machines are all built to last and made with high quality compon..
Suitable for rooms with up to 25 large plants or up to 50 small plants
Used in closed loop applications all over the USA for years, and proven to stand up to the challenge of indoor growing conditions, these are the very best dehumidifiers around.
This model is the mid range model of the range, and has built in Humidistat control for maintaining your humidity exactly where you want it.
These dehumidifiers are all built to last and made with high qu..
Recommended for rooms with up to 40 large plants or up to 80 small plants
Used in closed environment applications throughout the USA for years, and proven to remain true to the challenge of indoor growing conditions, these are the highest quality dehumidifiers around.
This model is completely state of the art, a top end model in the range, and has built in Humidistat control for maintaining your humidity exactly where you require it, onboard softwa..
Recommended for grow rooms with up to 60 large plants or up to 120 small plants
Used in closed environment applications throughout the USA for several years, and proven to remain true to the challenge of indoor growing conditions, these are the very best quality dehumidifiers around.
This version is absolutely state of the art, a top end model in the range, and has built-in Humidistat control for maintaining your humidity precisely where you want i..
The most powerful water cooled split on the market, the MCSe14.6 takes everything the MCSe7.3 has to offer then doubles it. With a massive 14.6kW cooling duty, powerful EC fan technology and low GWP refrigerant combining to deliver cool air with maximum efficiency and minimum environmental impact.
As with the MCSe7.3 the MCSe14.6 doesn’t require any ducting and the main unit can be sited up to 35M from the outdoor section allowing it to be sited deep with..
To regulate and monitor air humidity. Measurement range 30 - 100% r.F., measurement accuracy ±3% r.F., operating range 35 - 100% r.F.
The HG 130 hygrostat is a bangbang servo designed to control the relative humidity of humidifiers and dehumidifiers in environments with temperatures between 0 to 60 °C.
Fields of application are, for example, humidity control in climate cabinets, offices and computer rooms, storage facilities for foodstuffs, alcohol and t..
The HotBox Superb is a 2.7kW electronic Fan Heater. With Winter and Summer settings, it can help to keep your glasshouse cool or warm depending on the season.
HotBox Superb Click for larger image
• Half and full heat settings ensures maximum fuel economy
• Fan only setting use purely for air circulation
• Fitted with feet and hanging loops easy to install in the optimum position
• High output fan (250cfm, 450m3/hr) removes air quickly and efficiently
..
Following into the footsteps of the Hotbox Superb, but by no means standing in its shadow.
The Hotbox Sirocco has all the advantages and privileges of being “born” into the established Hotbox fold, ie a modern design, accurate thermostatic control, a powerful 1.8kW motor as well as our standard 2 year guarantee.
25cm long
21cm diameter
Airflow 400m3/hr or 230cfm..
Up to 30m² coverage.
No plant can live without water, indeed most plants are composed mostly out of water and the health of a plant will depend directly on the relative Humidity of its surroundings.
Leaves lose water through evaporation through their stomata – small openings in special cells on the leaf surface where gaseous exchange takes place.
If the relative Humidity is too low, a plant will start to give up some of its water into the surrounding air..
Up to 150m² coverage.
No plant can live without water, indeed most plants are composed mostly out of water and the health of a plant will depend directly on the relative Humidity of its surroundings.
Leaves lose water through evaporation through their stomata – small openings in special cells on the leaf surface where gaseous exchange takes place.
If the relative Humidity is too low, a plant will start to give up some of its water into the surrounding ai..
To increase humidity in enclosed spaces you cannot improve on a purpose-designed humidifier. These little beauties are designed to increase humidity in growing areas and propagators.
Features
3.0 litre capacity
Ultrasonic Misting
Mist capacity adjustable..
To increase humidity in enclosed spaces you cannot improve on a purpose-designed humidifier. These little beauties are designed to increase humidity in growing areas and propagators.
Features
Ultrasonic misting
Mist capacity adjustable
Manual Hygrostat
4ltr water reservoir..
To increase humidity in enclosed spaces you cannot improve on a purpose-designed humidifier. These little beauties are designed to increase humidity in growing areas and propagators.
Features
Digital Thermo/Hygrostat
4 Mode settings/display
Mist intensity control
Time/timer setting
Humidity display
Room temperature display
Mist intensity display
Water scarce display
Time display
5ltr water reservoir..
Up to 150m² coverage.
One Humidifier, 3 settings. Choose from between 3, 5 or 6.5ltrs output by simply adjusting the housing.
No plant can live without water, indeed most plants are composed mostly out of water and the health of a plant will depend directly on the relative Humidity of its surroundings.
Leaves lose water through evaporation through their stomata – small openings in special cells on the leaf surface where gaseous exchange takes place.
If ..
Cool and Warm Mist Humidifier. Automatic humidity control. Transparent water tank: 7 l. Easy maintenance. Alarm for water refilling& tank cleaning.
- Suitable for rooms up to 50 sq. m
- Cool and Warm Mist Humidifier
- Automatic humidity control
- Transparent water tank: 7 l
- Easy maintenance
- Alarm for water refilling& tank cleaning
- Spray control function
- Digital display
- Vibration prevention mechanism
- Safety lock
- Max spray: Cool mist :..
Easy to use plug and play Hygrostat.
10 – 80% RH
Simply plug the Hygrostat into a socket, plug the Humidifier into the Hygrostat and set required humidity level...
These thermostatically controlled radiators gently heat your grow room without the worry of stripping the environment of humidity or for that matter adding humidity. Will not dry out the plants or the atmosphere unlike fan or convection heaters currently available.
2kw - 9 radiator panel and 2.5kw - 11 radiator panel versions available with adjustable thermostat, 3 heat settings, power indicator, 24 hour timer built-in, castors, carry handle and overheat ..
Cold winter weather can be as much of a problem for indoor gardeners as summer heat, so we are now stocking Hylite greenhouse heaters to keep the frost at bay.
Hylite have designed their heaters to offer a cheap-to-run alternative to fan heaters and cleaner alternative to paraffin. Using less than 50W per foot - about the same as a standard household light bulb - they are a cost effective way to avoid cold stress.
This new slimline range come complete wi..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The Split Unit version Opticlimate is the ideal solution for locations where water may be a bottleneck. By means of the external unit outside of the warm air is optimally cooled, without the use of water. Through cooling coils hot air is sent to the outdoor unit and cooled returned.
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best ..
The OptiClimate water cooled air conditioner is equipped with an active carbon filter cloth, which constantly odors particles from the air to prevent any odors. The OptiClimate water cooled air will come standard with a carbon filter cloth, which must be replaced every six months in order to guarantee the best quality...
The water-cooled air conditioning Opticlimate become standard with vibration rubbers. Attached to the Opticlimate these special insulation springs are designed on the weight of the Opticlimate and provide optimal insulation. These springs are mainly of interest in placing the Opticlimate on a solid surface, with installation on steel wire are not necessary...
The OptiClimate water cooled air conditioner is equipped with an active carbon filter cloth, which constantly odors particles from the air to prevent any odors. The OptiClimate water cooled air will come standard with a carbon filter cloth, which must be replaced every six months in order to guarantee the best quality...
Technical Specifications:
Supply voltage 230-240 Hz V/50/60
Power consumption (idle / active) ± 13 mA
Dim. (w x h x d) 100 x 90 x 210 mm
Contact Rating 230V 50/60Hz, max 16A resistive Load
Noise level (max. / Per channel) 80 dB / 1 m
Type of contact (NC / NO or both) Grounded power outlet, grounded connect..
With the waterstroke damper you catch pressure differences in the water. By stopping or initiating a flow of water it causes a pressure difference which will be absorbed by the waterstroke damper...
The OptiClimate is controlled by the standard included remote control. The extensive remote control is also a controller that runs all processes automatically and is easy to follow. After the remote has been set to the minimum temperature (night), maximum temperature (day), the Opticlimate will heat or cool depending on the day or night time...
Head up to 4 meters. The connection is suitable for 7/4MM PVC hose. This pump is needed if the OptiClimate is lower than the drain and condensation water can not flow away from the slope...
The evaporative cooler can drain water from the OptiClimate cool and ready for re-use. The hot water outlet (50 ° Celcius) is cooled, so it can be re-used directly as cooling medium...
Most humidifiers do not support integrated scale filter, whereby the lime particles are not removed. Out of the mist In combination with a Opticlimate there is a chance that this lime particles precipitate in the engine, leading to faster wear.
Through this external water filter, you can be sure that all lime particles are removed before the spray is released...
The XL Series Air Cooled Air Conditioning unit is Excel’s flagship product and is built from a Split System design.
The Split System design allows for the Indoor Air Handler to act as the blower inside while the Outdoor Condensing unit rejects indoor heat from the refrigerant to the fresh air outside. This unit comes equipped with Plug and Play fittings making it your best choice for quick and easy installations. The XL Series is available in sizes rangin..
The Stealth Series Air Cooled Air Conditioning unit is Excel’s newest product. It’s all in the name; the Stealth Series is based on a Triple Split Design which allows for the compressor to be removed from the Outdoor Condensing Unit and placed in it’s own sound deadened box, eliminating all compressor noise from the outdoors! The unit also comes with Plug and Play fittings making installations quick and simple. Available in sizes ranging from 2.0 TON (24,0..
The 5kW Heater is a great addition to any XL Series or Stealth Series Indoor Air Handler. Maintain nighttime or winter temperatures with ease. Just slide the heater into an access door already made specifically for the heater. Plug the plastic connector onto the control board and use your existing power to the Indoor Air Handler. Next is to set your heating point on your digital thermostat that came with the existing system then let it do its job!
Key Ben..
The Excel UV Air Purifier is designed to change the molecular structure of the contaminants through DNA Sterilization and Photo-Oxidation using UV-C (254nm), destroying both biological and chemical contaminants. It will kill mold, bacteria and viruses! Simply mount inside air handler or ductwork and easily wire the power supply to your existing 24v control board in your air handler.
Key Benefits
Destroy mold, bacteria and spores
Ozone Free
E..
A Damper Control Package is used to control the temperature in two rooms. Only one room per cycle will be controlled using only one Air Handler. There are two motorized dampers connected to the supply air and two motorized dampers connected to the return air. One set of dampers will be connected to Room 1 (Supply and Return) which will be configured as the “OPEN” state and one set of dampers will be connected to Room 2 (Supply and Return) which will be con..
The Excel Odor Eliminator is perfect for any area where extreme smell is an issue. Unlike other filters this multistage filter will remove the harshest smells, giving you peace of mind. Either place the two piece unit inside your area or easily duct to and from your room, ensuring thorough air circulation past the primary and secondary filters, then through the 5 trays of Custom Charcoal. Plug the bottom box blower into any 115V plug and it will start elim..
Ducting has never been easier with Excel Air Systems’ new fabric air duct. Simply run the included tension cable from one end of the room to the other and attach the 15’ section of fabric duct to the cable using the integrated clips. Using the supplied lock-down strap attach one end of the fabric duct to your top plenum on your Indoor Air Handler. It’s that easy! Additional duct lengths can be added using the ducts’ built-in zipper system. The kit comes as..
This pump allows condensation from the Indoor Air Handler to flow into the pump, then when the internal float raises the condensate water can be pumped a distance of 20’ along with the capability of 15’ vertically to a drain source. Comes with a 6’ electrical cord and 20’ 3/8 tubing. Available in 120/230V applications.
Key Benefits
Automatic operation
Collect condensation from multiple sources
Pump condensation anywhere..
The VAPOR-B1 is a humidity controller that can control either a dehumidifier or humidifier. Once the VAPOR-B1 is connected to a power source, and the humidification device is connected to the VAPOR-B1 power outlet, the device connected will be automatically controlled by the settings on the VAPOR-B1.
The user can choose to have different Day and Night humidity settings which will be automatically switched to the correct mode by the built-in photocell. The..
Greenhouse heater ideal for mini or lean-to greenhouses
To guard against frost damage.
Thermostatically controlled and will cut in when required, protecting your plants.
For safety the heating element is sheathed and all electrical connections are protected inside the enclosure at the end of the heater.
Floor or wall mounted.
Size 120mm. Diameter x 540mm.long.
1kW heater..
HOTBOX Elite greenhouse fan heater with heat output of 2.7kW. The thermostat control cuts the heat supply when the selected temperature is reached but allows the air fan to continue.
This updated model has a new ergonomic handle, wider legs for increased stability, rubberised flex and a thermal safety cut-out.
Fan heaters improve circulation and control the temperature, protecting against frost and cold weather.
The unit can be floor or bench mounted o..
HOTBOX Levant plus greenhouse heater has an output of 1.8kW, linked to a thermostat control which cuts the heat supply.
Fan heaters improve circulation and control the temperature, protecting against frost and cold weather.
These units can be used as fans in the summer months by switching off the heat unit.
They may be used in sheds, garages or conservatories and may be hung from the hooks and chains supplied.
Size 250mm. x 220mm. Diameter
Ideal for..
Electric convection Greenhouse heater.
Strong industrial grade sheet metal case powder coated.
Thermostatic control.
2200 Watts.
230V Supply 13A plug.
Ideal for up to 6 x 6 foot greenhouse.
Size 360mm. x 160mm. x 540mm high...
Provides a stable environment to protect plants against sudden temperature and humidity fluctuations.
Helps reduce humidity and condensation when growing indoors thus protecting against fungal attack.
Ideal in propagation areas where a constant ambient temperature is critical...
Temperature and Humidity alarm sensors for surveliance of the min. / max Temperature and Humidity.
The settings will be done over the GSM telephone. The sensor respond via SMS if the temperature or the Humidity is over/under the setting.
The sensor comes with 6m cable.
Sizes and technical data's:
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Humidity accuracy ±4.5%rh
..
Ideal for smaller grow tents or large propagator to maintain high levels of humidity.
This powerful and compact humdifier produces water vapour via ultrasonic vibration for a very fine micron size droplet correcting the humidity of the air dried out by central heating or environmental conditions associated with indoor growing. Each unit is cool running and gives 100% humidity. Mist Makers maintain the optimum growing environment required for cuttings..
Ideal for medium sized grow tents to maintain high level of humidity.
This powerful and compact humdifier produces water vapour via ultrasonic vibration for a very fine micron size droplet correcting the humidity of the air dried out by central heating or environmental conditions associated with indoor growing. Each unit is cool running and gives 100% humidity. Mist Makers maintain the optimum growing environment required for cuttings and seedlings a..
Quiet running small to medium room unit. Removes 750ml of moisture per day - ideal for using during the cropping phase of your growth cycle. 1.16 litre reservoir...
Mist Makers maintain the optimum growing environment required for cuttings and seedlings as well as growth through the vegetative stage of your plant cycle. Place in a large propagator or centre of the growroom and watch the vapour float around your cuttings producing rapid growth rates and delivering greater nutrient uptake along with nutrient transportation...
Mist Makers maintain the optimum growing environment required for cuttings and seedlings as well as growth through the vegetative stage of your plant cycle. Place in a large propagator or centre of the growroom and watch the vapour float around your cuttings producing rapid growth rates and delivering greater nutrient uptake along with nutrient transportation...
OptiClimate Plenumbox 3500 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 3500 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 3500 PRO3
Dimensions: 480 x 399mm
Flange: 250 mm
Especially for: Dual-Room s..
OptiClimate Plenumbox 6000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 6000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 6000 PRO3
Dimensions: 597 x 497mm
Flange: 250 mm
Especially for: Dual-Room s..
OptiClimate Plenumbox 10000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 10000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 10000 PRO3
Dimensions: 688 x 497 mm
Flange: 355 mm
Especially for: Dual-Ro..
OptiClimate Plenumbox 15000 PRO3. The plenum box is an insulated case that can be installed at the back of the OptiClimate 15000 PRO3. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room System with a three-way valve. The plenum box comes with four perforated holes that can be used to secure the air hose.
Suitable for: OptiClimate 15000 PRO3
Dimensions: 890 x 538 mm
Flange: 355 mm
Especially for: Dual-Ro..
The Faran HR Digital Humidity and Temperature Control (HR-DHTC) is a superb environmental controller and is ideal for maintaining a perfect climate for your plants.
Environmental control should be first on the list when growing indoors, when using hydroponics the HR-DHTC takes much of the micromanagement out of humidity control to make it easier for you to focus on other important areas of your grow room.
There is a close relationship between the tempera..
Bergdorf Optima Features
Day & night recognition
No water required (at all)
Plug & play – (no engineer required)
Co2 diffuser ‐ (introduce co2 at plant canopy height)
Silent outdoor unit (this is the quietest unit on the market – by a huge margin!)
In‐built (replaceable) germicidal lamp (eradicate all contaminant issues)
Low current consumption (no ‘spike’ in electrical consumption)
R h control feature (‘dry’ operation mode)
In‐built act..
The Airsonic GS380 is equiped with a negative ion generating system to increase the diffusion’s quality and an adjustable potentiometer that allows control of the air flow for much precision. It also includes a mechanical hygrostat, automatic stop when tank is empty and is a very quiet performer.
Specifications
Watts: 50
Volts: 220/240
Litres per hour: 0.4
Size: 33x26x36cm
Capacity: 6 litres..
The innovative strength of the Climate Butler cannot only be found in its high efficiency and cost-effectiveness. It is also the result of the elimination of a counterproductive factor. If air is heated or cooled by a single air conditioning unit, humidity is instantly affected. The problem is that this effect can be detrimental. One air conditioning unit cannot dehumidify and heat air simultaneously, due to the fact that air conditioners dehumidify air by..
OptiClimate 3500 PRO4 watercooled aircon.
The OptiClimate 3500 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 3,5 kW
Dimensions: 870 x 630 x 405 mm
Weight: 58 kg
Water usage: 1 up to 2 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 2x1500W
Phase: 1 - 3
Split Unit: ..
OptiClimate 6500 PRO4 Watercooled Aircon.
The OptiClimate 6500 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 6 kW
Dimensions: 990 x 760 x 505 mm
Weight: 85 kg
Water usage: 2 up to 4 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1500W
Phase: 1 - 3
Split Unit: No..
OptiClimate 10000 PRO4 Watercooled Aircon.
The OptiClimate 10000 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 10 kW
Dimensions: 1050 x 800 x 505 mm
Weight: 125 kg
Water usage: 3 up to 6 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1200W
Phase: 1 - 3
Split Uni..
OptiClimate 15000 PRO4 Watercooled Aircon.
The OptiClimate 15000 PRO4 from the new PRO 4 series is a lot more efficient with water and electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 15 kW
Dimensions: 1230 x 900 x 545 mm
Weight: 165 kg
Water usage: 5 up to 9 litres per minute
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2700W
Phase: 3
Split Unit: N..
OptiClimate 3500 PRO4 Split air-cooled Aircon.
The OptiClimate 3500 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 3.5 kW
Dimensions: 870 x 630 x 405 mm
Weight: 58 kg
Voltage: 230V
Power consumtion: 820W
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 2x1500W
Phase: 1 - 3
Split Unit: Yes
Extended Re..
OptiClimate 6000 PRO4 Split air-cooled Aircon.
The OptiClimate 6000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 6 kW
Dimensions: 990 x 760 x 505 mm
Weight: 85 kg
Power Consumption: 1590W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x1500W
Phase: 1 - 3
Split Unit: Yes
Extended Re..
OptiClimate 10000 PRO4 Split air-cooled Aircon.
The OptiClimate 10000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 10 kW
Dimensions: 1050 x 800 x 505 mm
Weight: 125 kg
Power Consumption: 2390W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2000W
Phase: 1 - 3
Split Unit: Yes
Extend..
OptiClimate 15000 PRO4 Split air-cooled Aircon.
The OptiClimate 15000 PRO4 Split from the new PRO 4 series is a lot more efficient with electricity and has a much higher dehumidifying capacity.
Specifications
Cooling capacity: 15 kW
Dimensions: 1230 x 900 x 545 mm
Weight: 165 kg
Power Consumption: 3500W
Voltage: 230V
Connection: 1 Fase 3x2,5 mm² + D16-1F Automatic
Heating elements: 3x2700W
Phase: 1 - 3
Split Unit: Yes
Extend..
The DimLux humidity (RH) sensor displays the humidity on the DimLux Maxi Controller. If the RH sensor is connected, a humidifier can also be switched on with the DimLux Maxi Controller. An additional plant temperature sensor is required in order to calculated the Vapour Pressure Deficit (VPD). Comes with extra long 10m cable...
OptiClimate CO2 Monitor with humidity (RH) and temperature sensor. The OptiClimate CO2 Monitor clearly indicates the CO2 level in the room. This device is also equipped with a humidity sensor and a temperature sensor. Furthermore, these values are clearly readible in the digital display of the CO2 monitor. This CO2 monitor can only be used as a reference, and has no adjustment options...
OptiClimate three-way valve 250mm is suitable for the OptiClimate 3500, 6000 PRO3 and PRO4.
This three-way valve for the OptiClimate 3500, 6000 PRO3 and PRO4 should be used within the Dual Room setup: only one OptiClimate will be required to cool two rooms. However, an additional temperature sensor is required which you can order here as well...
OptiClimate 355mm three-way valve is suitable for the OptiClimate 10000, 15000 PRO3 and PRO4.
The three-way valve is used within the Dual Room System. Using the Dual Room System, only one OptiClimate will be required to cool two rooms. However, an additional temperature sensor is required. When used with the three-way valve, the night-time heating and dehumidifying function is cancelled...
OptiClimate damping plates with adhesive layer. These damping plates are specifically designed for all versions of the OptiClimate watercooled airco and ensure extra damping and a quieter system. 2 pieces...
OptiClimate Thermal Vapour Barrier Film (25 x 1.5m roll). The OptiClimate thermal vapour barrier reflective film is well suited to isolate and reflect an area all along. Due to the bubble profile all the heat stays inside the area. This product is best to combine with the aluminum reflective tape. 25 x 1.5m roll...
This special air distribution hose is made of high quality anti-static white LDPE film with a thickness of 180 Mu. There are round holes punched in an area of 120˘Ş. As a result, the air is directed to 1/3 of the circle and the air at a high velocity is blown out. As use is made of white film, the air distribution hose is light reflective...
The connection set comes standard with the OptiClimate. Separately available connection sets typically consists of:
Magnetic valve
LDPE connectors
Vibration insulating rubbers with mounting hardware
Condensate water connecting nipple
Teflon tape
Adhesive gel to prevent connectors from loosening over time
7m cord for securing the circuit board, and operating instructions..
The flanges are provided with screw holes, which can also be used to secure the flange against a surface. The hose connection is tapered for easy installation. The flanges are available in four different diameters, but each flange also comes in one or more smaller sizes.
Flange code information: The first number indicates the diameter of the filter on which the flange can be mounted. The second number is the diameter of the flange connectio..
Added humidity is often required by plants when growing indoors. It is particularly beneficial during the propagation and vegetative growth phase of a plants life.
These new units are easy to use ‘plug, fill and play.’
Adjustable dosing up to 250ml/hr lasting up to 16 hours.
Reliable, buy with confidence, 2 year warranty (doesn’t cover units using incorrect water.)
Only use Deionised, distilled or R.O. water with misters...
Added humidity is often required by plants when growing indoors. It is particularly beneficial during the propagation and vegetative growth phase of a plants life.
These new units are easy to use ‘plug, fill and play.’
Adjustable dosing up to 350ml/hr lasting up to 32 hours.
Reliable, buy with confidence, 2 year warranty (doesn’t cover units using incorrect water.)
Only use Deionised, distilled or R.O. water with misters...
Dimlux Temperature and Humidity Module
With the Dimlux Aux Box you can now manage your Temperature and humidity parameters.
The Auxbox is connected to the Dimlux Maxi Controller through the Auxiliary port on the unit with this module you can connect a heater/heating system, humidifier or dehumidifier to control the Relative humidity, Temp and RH Set points for both day and night operation within your micro climate...
This all-in-one sensor measures CO2, temperature, humidity and detects light simultaneously. Also, the sensor is equipped with a built-in calibration function to calibrate the CO2 sensor against outdoor air. The calibration menu is only accesible through a CO2 controller. Also equipped with a built-in switch to prevent unwanted calibration...
The EMS-Pro is the culmination of a lengthy research and development program at Ecotechnics, our design goal was to create a simple usb sensor to measure temperature, humidity & CO2 levels and to record them for later analysis.
Key features:
Plug and play USB sensor
Windows compatible
Realtime graphics display
Records all levels for graphing
1 year warranty..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain t..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
AirSupplies Holland BV is an innovative, pioneering company which develops high-grade horticultural products in-house. Their goal is to develop products that achieve the best performance in every field. We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the optimum climate you need for maximum yields.
We achieve this goal by making use of advanced technical methods. Our products enable you to maintain the..
D1-HUM/Digital Humidity Controller
The D1-HUM Digital Day/Night humidity controller is a very accurate device that allows the user to control EITHER a humidifying or dehumidifying device.
A two meter long remote humidity sensor can be placed where it can sense the moisture level (rH) that the D1-HUM will be controlling.
The user first selects whether they are controlling a humidifying or dehumidifying device.
Feature with Day and Night humidity setti..
This EC fan controller with LCD display, keyboard and power led allows a very easy setting and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and rounds per minute of the exhaust fan. A built in light sensor in the probe recognize day/night modes.
The EC fan controller comes with power adaptor 1m cable, a 4m sensor cable and 2x 4m fan cable including all conn..