Perfect for the AutoGrow IntelliDose system and AutoGrow Mini Dosers An affordable, highly accurate dosing pump for use with the AutoGrow IntelliDose system and both AutoGrow Mini Dosers (EC and pH) single unit...
Feature packed
This hydroponic doser sets a new benchmark in the small dosing controller market. The Intelli-Dose is absolutely feature packed to enable it to cope with just about any hydroponic system. Just take a look at the specification overleaf.
Simple to operate
The secret to its simplicity is that the controller can be configured to suit various systems and when this is done all of the irrelevant settings disappear from the..
Intelligent Control
Doses up to 9 nutrients, additives and pH
Four (24 VDC) outputs available for irrigation if not used for nutrients.
Controls all growing methods - NFT, DFT/DWC, soil, media, drip, and aeroponics.
Proportional dosing rapidly adjusts between irrigations.
Sequential pump control allows each additive time to mix.
Displays EC, CF, TDS, ˚C, ˚F, pH
Set different Conductivity (EC) for day and night.
Water level control..
Easily connect IntelliDose into Edenic cloud software.
The IntelliLink provides internet connectivity to Bluelab Intelli devices, including IntelliDose. With IntelliLink, you can remotely access these systems via Edenic software.
Connects Bluelab IntelliDose Controller to the internet
Connect to your local router via Ethernet cable or Wi-Fi
Get your intelli-data on your mobile device
Remotely change recipes or parameters
Multiple devi..
The Bluelab Peristaltic Pump 1400ml was designed with improved pump performance and ease of maintenance in mind
Peristaltic Pump for Bluelab IntelliDose Controllers that doses up to 1400ml per minute
Requires no tools to replace the squeeze tube
The spring-loaded roller block design enhances both performance and squeeze tube life
Why Peristaltic Pumps?
Affordable commercial dosing volume
Des..
The Bluelab Peristaltic Pump 450ml was designed with improved pump performance and ease of maintenance in mind
Peristaltic Pump for Bluelab IntelliDose Controllers that doses up to 450ml per minute
Requires no tools to replace the squeeze tube
The spring-loaded roller block design enhances both performance and squeeze tube life
Why Peristaltic Pumps?
Affordable commercial dosing volume
Desig..
Measure the nutrient levels in your solution accurately and reliably
This probe is a direct replacement for the EC probe on the Bluelab IntelliDose Controller
With an accurate EC sensor, you can measure electrical conductivity (EC) in your solution and ensure crops are getting the right amount of nutrients they need to thrive
Wire configuration: Black, White, Red..
Direct replacement for the Intelli Range power supply 24DC 2.5A
Over time, power supplies can become unreliable. It is always good to have an extra power supply on hand. Available in global plug types.
This power supply is a direct replacement for the power supply on the following devices:
Bluelab IntelliDose Controller
IntelliClimate
Technical Specification: 100-240VAC, 50/60Hz, 1.4-0.7A Input; 24V 2.4A, 60W Max Output..
Perfect for the AutoGrow IntelliDose system and AutoGrow Mini Dosers An affordable, highly accurate dosing pump for use with the AutoGrow IntelliDose system and both AutoGrow Mini Dosers (EC and pH) single unit...
Feature packed
This hydroponic doser sets a new benchmark in the small dosing controller market. The Intelli-Dose is absolutely feature packed to enable it to cope with just about any hydroponic system. Just take a look at the specification overleaf.
Simple to operate
The secret to its simplicity is that the controller can be configured to suit various systems and when this is done all of the irrelevant settings disappear from the..
Intelligent Control
Doses up to 9 nutrients, additives and pH
Four (24 VDC) outputs available for irrigation if not used for nutrients.
Controls all growing methods - NFT, DFT/DWC, soil, media, drip, and aeroponics.
Proportional dosing rapidly adjusts between irrigations.
Sequential pump control allows each additive time to mix.
Displays EC, CF, TDS, ˚C, ˚F, pH
Set different Conductivity (EC) for day and night.
Water level control..
Easily connect IntelliDose into Edenic cloud software.
The IntelliLink provides internet connectivity to Bluelab Intelli devices, including IntelliDose. With IntelliLink, you can remotely access these systems via Edenic software.
Connects Bluelab IntelliDose Controller to the internet
Connect to your local router via Ethernet cable or Wi-Fi
Get your intelli-data on your mobile device
Remotely change recipes or parameters
Multiple devi..
The Bluelab Peristaltic Pump 1400ml was designed with improved pump performance and ease of maintenance in mind
Peristaltic Pump for Bluelab IntelliDose Controllers that doses up to 1400ml per minute
Requires no tools to replace the squeeze tube
The spring-loaded roller block design enhances both performance and squeeze tube life
Why Peristaltic Pumps?
Affordable commercial dosing volume
Des..
The Bluelab Peristaltic Pump 450ml was designed with improved pump performance and ease of maintenance in mind
Peristaltic Pump for Bluelab IntelliDose Controllers that doses up to 450ml per minute
Requires no tools to replace the squeeze tube
The spring-loaded roller block design enhances both performance and squeeze tube life
Why Peristaltic Pumps?
Affordable commercial dosing volume
Desig..
Measure the nutrient levels in your solution accurately and reliably
This probe is a direct replacement for the EC probe on the Bluelab IntelliDose Controller
With an accurate EC sensor, you can measure electrical conductivity (EC) in your solution and ensure crops are getting the right amount of nutrients they need to thrive
Wire configuration: Black, White, Red..
Direct replacement for the Intelli Range power supply 24DC 2.5A
Over time, power supplies can become unreliable. It is always good to have an extra power supply on hand. Available in global plug types.
This power supply is a direct replacement for the power supply on the following devices:
Bluelab IntelliDose Controller
IntelliClimate
Technical Specification: 100-240VAC, 50/60Hz, 1.4-0.7A Input; 24V 2.4A, 60W Max Output..