The water-cooled air conditioning Opticlimate become standard with vibration rubbers. Attached to the Opticlimate these special insulation springs are designed on the weight of the Opticlimate and provide optimal insulation. These springs are mainly of interest in placing the Opticlimate on a solid surface, with installation on steel wire are not necessary...
Fits all PowerPlant ALB reflectors and great for hanging lamps
Ideal for hanging lamps in you’re your grow room. If you are using HID lamps and ballasts then purchase the IEC version. If using self ballasted CFL lamps then purchase the 3 pin version. This adaptor allows PowerPlant's world beating reflectors to be used with any IEC ballast...
The LUMii HID Reflector Extension Lead is available in 1.5m and 5m lengths. Suitable for use with all LUMii and IEC reflectors. Please make sure that when you are using extension leads for HID, your ballast is built to ignite the lamp over long distances. PowerPlant and LUMii ballasts are able to ignite a lamp from up to 15 metres from the ballast...
Suitable for use with all LUMii and IEC reflectors. Please make sure that when you are using extension leads for HID, your ballast is built to ignite the lamp over long distances. PowerPlant and LUMii ballasts are able to ignite a lamp from up to 15 metres from the ballast...
The PowerPlant AeroWing Reflector is great for all general growroom needs where heat is an issue and it now has an easy clean hinged glass design. The PowerPlant AeroWing allows 'closer to plant' growing through its unique air cooled design which draws air past the lamp through a 6" outlet at the rear of the lamp holder. Also ideal in a multiple reflector inline ducted system. The PowerPlant AeroWing features a stronger more robust glass fixing method and ..
OptiClimate damping plates with adhesive layer. These damping plates are specifically designed for all versions of the OptiClimate watercooled airco and ensure extra damping and a quieter system. 2 pieces...
The FloraFlex® Pipe Fitting T (1” or 3/4”) allows you to connect multiple manifolds to your PVC line. Glue your PVC to the Flora Pipe fitting and then easily snap the Fitting into the Flora Valve.
Compatible with regular 1” or ¾” PVC pipe.
Attaches to Flora Valve with snap feature (no glue required).
O-Ring included.
Available in 1″ or 3/4″.
O-Ring should be lubed (if not already) for easy install and prevention of leakage.
120 psi
PVC..
Great for joining ducting without the sharp bends of a traditional tee. Suitable for joining a fan to two ducts or two fans to one duct to double airflow...
The flexible shape of the Omega Adjustable Reflector allows the user to tweak the intensity of their light at different stages of growth to recreate the conditions that plants normally experience outdoors. It's easy to adjust the maintain optimum light levels and an even spread across the canopy.
Increase yields with the easy to set up Adjustable Reflector from Omega Lighting
Omega's Adjustable Reflector is a high-quality aluminium adjustable reflector, ..
Protect your growing empire with AirTitan
The AirTitan Sanitizer from G.A.S utilises advanced sterilizing
technologies that have previously been used in space exploration, and
now set to revolutionise the horticulture and growing industry.
Scientifically proven to sterilize a room. Any airborne particles or
bacteria are instantly neutralised when passing through the unit thanks
to the AirTitan’s innovative four stage process which ensures a clean..
The water-cooled air conditioning Opticlimate become standard with vibration rubbers. Attached to the Opticlimate these special insulation springs are designed on the weight of the Opticlimate and provide optimal insulation. These springs are mainly of interest in placing the Opticlimate on a solid surface, with installation on steel wire are not necessary...
Fits all PowerPlant ALB reflectors and great for hanging lamps
Ideal for hanging lamps in you’re your grow room. If you are using HID lamps and ballasts then purchase the IEC version. If using self ballasted CFL lamps then purchase the 3 pin version. This adaptor allows PowerPlant's world beating reflectors to be used with any IEC ballast...
The LUMii HID Reflector Extension Lead is available in 1.5m and 5m lengths. Suitable for use with all LUMii and IEC reflectors. Please make sure that when you are using extension leads for HID, your ballast is built to ignite the lamp over long distances. PowerPlant and LUMii ballasts are able to ignite a lamp from up to 15 metres from the ballast...
Suitable for use with all LUMii and IEC reflectors. Please make sure that when you are using extension leads for HID, your ballast is built to ignite the lamp over long distances. PowerPlant and LUMii ballasts are able to ignite a lamp from up to 15 metres from the ballast...
The PowerPlant AeroWing Reflector is great for all general growroom needs where heat is an issue and it now has an easy clean hinged glass design. The PowerPlant AeroWing allows 'closer to plant' growing through its unique air cooled design which draws air past the lamp through a 6" outlet at the rear of the lamp holder. Also ideal in a multiple reflector inline ducted system. The PowerPlant AeroWing features a stronger more robust glass fixing method and ..
OptiClimate damping plates with adhesive layer. These damping plates are specifically designed for all versions of the OptiClimate watercooled airco and ensure extra damping and a quieter system. 2 pieces...
The FloraFlex® Pipe Fitting T (1” or 3/4”) allows you to connect multiple manifolds to your PVC line. Glue your PVC to the Flora Pipe fitting and then easily snap the Fitting into the Flora Valve.
Compatible with regular 1” or ¾” PVC pipe.
Attaches to Flora Valve with snap feature (no glue required).
O-Ring included.
Available in 1″ or 3/4″.
O-Ring should be lubed (if not already) for easy install and prevention of leakage.
120 psi
PVC..
Great for joining ducting without the sharp bends of a traditional tee. Suitable for joining a fan to two ducts or two fans to one duct to double airflow...
The flexible shape of the Omega Adjustable Reflector allows the user to tweak the intensity of their light at different stages of growth to recreate the conditions that plants normally experience outdoors. It's easy to adjust the maintain optimum light levels and an even spread across the canopy.
Increase yields with the easy to set up Adjustable Reflector from Omega Lighting
Omega's Adjustable Reflector is a high-quality aluminium adjustable reflector, ..
Protect your growing empire with AirTitan
The AirTitan Sanitizer from G.A.S utilises advanced sterilizing
technologies that have previously been used in space exploration, and
now set to revolutionise the horticulture and growing industry.
Scientifically proven to sterilize a room. Any airborne particles or
bacteria are instantly neutralised when passing through the unit thanks
to the AirTitan’s innovative four stage process which ensures a clean..