An OptiClimate canopy temperature camera can be connected to the system to monitor evaporation from the crop: an excessive canopy temperature is indicative of problems with the plants' evaporation capacity (for example, due too little water or excessive light).
If the canopy temperature rises to an excessive level then the DimLux ballasts are dimmed or switched off until the temperature falls to an acceptable level: failure to lower an excessive canopy te..
It is important to maintain the temperature nutrient solution between 20-24°C as this will ensure better growth rates and is particularly important during the colder season
With water heaters they are only to be used in environments that are very cold. You are not meant to heat the water just remove the chill from it. The water would still seem colder than it would hotter. Feeding your plants warm water is more detrimental than feeding them cold water...
Thermostatically controlled indestructible water heaters. The Bentley of water heaters, how many traditional glass ones have you already been thru? Well never again with these all singing and dancing beauties...
The THEO water heater has all the necessary features for safe and precise temperature maintance of the water in your tank.
The exclusive technology and the high quality of the components guarantee a long lasting product.
Submersible, no thermal shock, high impact resistance, graduated scale, vertical and horizontal positioning, precise maintenance of set temperature...
The HotBox Superb is a 2.7kW electronic Fan Heater. With Winter and Summer settings, it can help to keep your glasshouse cool or warm depending on the season.
HotBox Superb Click for larger image
• Half and full heat settings ensures maximum fuel economy
• Fan only setting use purely for air circulation
• Fitted with feet and hanging loops easy to install in the optimum position
• High output fan (250cfm, 450m3/hr) removes air quickly and efficiently
..
Following into the footsteps of the Hotbox Superb, but by no means standing in its shadow.
The Hotbox Sirocco has all the advantages and privileges of being “born” into the established Hotbox fold, ie a modern design, accurate thermostatic control, a powerful 1.8kW motor as well as our standard 2 year guarantee.
25cm long
21cm diameter
Airflow 400m3/hr or 230cfm..
Cold winter weather can be as much of a problem for indoor gardeners as summer heat, so we are now stocking Hylite greenhouse heaters to keep the frost at bay.
Hylite have designed their heaters to offer a cheap-to-run alternative to fan heaters and cleaner alternative to paraffin. Using less than 50W per foot - about the same as a standard household light bulb - they are a cost effective way to avoid cold stress.
This new slimline range come complete wi..
The 5kW Heater is a great addition to any XL Series or Stealth Series Indoor Air Handler. Maintain nighttime or winter temperatures with ease. Just slide the heater into an access door already made specifically for the heater. Plug the plastic connector onto the control board and use your existing power to the Indoor Air Handler. Next is to set your heating point on your digital thermostat that came with the existing system then let it do its job!
Key Ben..
Heat - Seeds or cuttings are placed on the heated base using any propagation medium. Desired temperature is set – within a range of to 5°C to 30°C - using the digital thermostat. Ultra accurate thermostat probe is placed inside the propagator to read and maintain the desired temperature to within 1°C.
Heat is dispersed evenly across the base, unlike most heated propagators there are no hot or cold spots; so no uneven growth.
Humidity – Vitopod layers and..
High Quality Heated Propagator with Room to Grow. Free starter kit of pots and trays included!
This heat and grow variable temperature propagator is fully adjustable, select between 12C and 28C. Temperature adjustment is easy via the easy-to-use remote thermostat. These utilise a long life 22 watt heater which uses less power than an ordinay light bulb. Fitted plug included...
Adding uniform heat to your plants will speed up germination by days! ROOT!T Heat Mat offers more uniform heating than others on the market with its intricate pattern of fine wire throughout its waterproof, frayproof layers delivering the durability to withstand rugged greenhouse environments.
This mat warms the rooting area to the ideal temperature required for perfect propagation, whether seed-germination or rooting cuttings. A thermostat is also availa..
A new version is now available here: ROOT!T Heat Mat Thermostat.
ROOT!T’s electronic temperature controller is compatible with all heat mats and is an optional accessory for the ROOT!T Heat Mats.
The thermostat controls the temperature of heat mats evenly in colder or warmer than normal environments. It provides constant optimum temperatures for specific plants. It has an easy plug-in operation with an illuminated indicator.
Features:
Easy t..
BioGreen heat mats are ready-to-use with a thermostatic temperature control in the range of 0-40°C.
Rapid germination
Faster growth
Even heat distribution
Spray waterproof, CE approved..
Ultra accurate digital thermostat; ideal fo heat mats or heater cables up to 500w.
Adjust temperature (where applicable) from 5C to 30C, accurate to within 1C...
This propagator is like a mini tunnel house that holds a couple of hundred cuttings, providing ideal humidity and bottom head for rapid rooting.
Large heated area 1200mm long by 500mm wide
Even heat distribution from the heat mat.
Accurate temperature control with thermostat(0-40°C)
Thermostat has a sensor which can be inserted into the actual soil of the seedlings for perfect temperature control where you need it.
High top to accommodate taller plants (5..
The X-Stream Heat combines the humidity retention of the X-Stream lid, along with even heat distribution across the entire base.
Even growth - no hot or cold spots means plants develop at the same rate.
Easy to use - just plug in and the base will automatically shut-off when optimum temperature is reached.
61cm x 42cm x 27cm
Also available with variable thermostat as pictured above.
X-Stream propagators now have SunBlaster-ready lids - c..
The X-Stream Heat combines the humidity retention of the X-Stream lid, along with even heat distribution across the entire base.
Even growth - no hot or cold spots means plants develop at the same rate.
Easy to use - just plug in and the base will automatically shut-off when optimum temperature is reached.
112cm x 62cm x 28cm
Also available with variable thermostat as pictured above.
X-Stream propagators now have SunBlaster-ready lids - ..
HOTBOX Elite greenhouse fan heater with heat output of 2.7kW. The thermostat control cuts the heat supply when the selected temperature is reached but allows the air fan to continue.
This updated model has a new ergonomic handle, wider legs for increased stability, rubberised flex and a thermal safety cut-out.
Fan heaters improve circulation and control the temperature, protecting against frost and cold weather.
The unit can be floor or bench mounted o..
HOTBOX Levant plus greenhouse heater has an output of 1.8kW, linked to a thermostat control which cuts the heat supply.
Fan heaters improve circulation and control the temperature, protecting against frost and cold weather.
These units can be used as fans in the summer months by switching off the heat unit.
They may be used in sheds, garages or conservatories and may be hung from the hooks and chains supplied.
Size 250mm. x 220mm. Diameter
Ideal for..
The DV-14K is a timed relay box which you can use to switch a maximum of 4×600 Watt, or 5×400 watt luminaires on and off. The DV-14K also has a heater contact, which means the heater will come on when the lights go off, keeping a more consistent temperature in the grow room.
Dimensions: 210x290x90mm
Required voltage: 230 Vac/50Hz.
Max. output: 15 Amp
Output heater: 15 Amp
Isolation level: IP-44..
Provides a stable environment to protect plants against sudden temperature and humidity fluctuations.
Helps reduce humidity and condensation when growing indoors thus protecting against fungal attack.
Ideal in propagation areas where a constant ambient temperature is critical...
Voodoo Heat is a brand new bio-stimulant product carefully designed to help plants cope with heat stress problems when growing in adverse conditions...
The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. Model with heating socket is on when lights are off (power management).
Sizes and technical data's:
Case: WxHxD = 200x255x95mm
Timer box: WxHxD = 230x300x110mm
1 Pole incl. connector 16A (EU) 4x600W
1 Pole incl. connector 10A (CH) 3x600W,
Volt: 230V / 50Hz
24h timer with 36h power rese..
The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. Model with heating socket is on when lights are off (power management).
Sizes and technical data's:
Case: WxHxD = 200x255x95mm
Timer box: WxHxD = 230x300x110mm
1 Pole incl. connector 16A (EU) 4x600W
1 Pole incl. connector 10A (CH) 3x600W,
Volt: 230V / 50Hz
24h timer with 36h power reserve 30m..
The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. Model with heating socket is on when lights are off (power management).
Sizes and technical data's:
Case: WxHxD = 200x255x95mm
Timer box: WxHxD = 230x300x110mm
1 Pole incl. connector 16A (EU) 4x600W
1 Pole incl. connector 10A (CH) 3x600W,
Volt: 230V / 50Hz
24h timer with 36h power reserve 30m..
The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. Model with heating socket is on when lights are off (power management).
Sizes and technical data's:
Case: WxHxD = 200x255x95mm
Timer box: WxHxD = 230x300x110mm
1 Pole incl. connector 16A (EU) 4x600W
1 Pole incl. connector 10A (CH) 3x600W,
Volt: 230V / 50Hz
24h timer with 36h power reserve 30m..
The PowerPlant Heat Shield cleverly redirects light and heat from the central 'hot spot' created beneath all horizontally mounted lamps towards growroom extremities. This enable your horizontal reflector to be placed much closer to plants to increase light levels and penetration whilst maintaining similar (often greater) areas of production under each lamp...
The PowerPlant Heat Shield cleverly redirects light and heat from the central 'hot spot' created beneath all horizontally mounted lamps towards growroom extremities. This enable your horizontal reflector to be placed much closer to plants to increase light levels and penetration whilst maintaining similar (often greater) areas of production under each lamp...
The DV-12K is a time controlled relay box with which a maximum 2 x 600 Watt fittings or 2 x 400 Watt fittings can be switched. Next to this, the DV-12K has an outlet for a heater.
Specifications
Dimensions: 110x210x70mm.
Required voltage: 230 Vac/50Hz.
Max. output: 6
Output heater: 6A
Isolation level: IP-44
European Plugs..
The DV-12K is a time controlled relay box with which a maximum 2 x 600 Watt fittings or 2 x 400 Watt fittings can be switched. Next to this, the DV-12K has an outlet for a heater.
The Timer Relay Davin DV28K manages up to 8x600W but unlike traditional timers, when the lights shut down, the heater connected to the third outlet of Davin DV28K (reserved for this connection) takes over and compensates for the lack of heat which could plants suffer.
Combining ..
The DV-14K is a timed relay box which you can use to switch a maximum of 4×600 Watt, or 5×400 watt luminaries on and off. The DV-14K also has a heater contact. Combining serenity and efficiency, all Davin products are equipped with a timer GRASSLIN, which are the most efficient on the indoor horticulture market.
Specifications
2 years warranty.
Dimensions: 210x290x90mm.
Required voltage: 230 Vac/50Hz.
Max. Output: 15A
Output heater: 15A
Isolation ..
The DV-44 is a timed relay box which you can use to switch a maximum of 16×600 Watt, or 20×400 Watt luminaires on and off.
Specifications
Dimensions: 210x290x90mm.
Required voltage: 230 Vac/50Hz.
Max. output: 4×15 Amperé.
Isolation Level: IP-44.
European Plugs..
The DV-33 is a timed relay box which you can use to switch a maximum of 12×600 Watt, or 16×400 Watt luminaires on and off.
Specifications
Dimensions: 210x290x90mm.
Required voltage: 230 Vac/50Hz.
Max. output: 3×15 Amperé.
Isolation level: IP-44.
European Plugs..
Helps Protect Plants from Cold Conditions
Help plants grow and thrive when temperatures drop below 5 degrees Celsius using VitaLink Heat. An advanced bio stimulant designed for use by growers striving to achieve maximum yield, cost-effectively and using advanced technology.
Benefits:
Protects plants against stress in cold and frosty conditions
Prevents flower abortion
Allows side shoots and buds to develop in low temperaturesEncourages growth hormon..
The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The smallest unit of the series, the Ultra 300 emits only 20dB of noise and is therefore even more quiet than a standard household refrigerator..
These quality Bimex Rosmalen heaters have been designed to regulate the temperature of the water to avoid crystallisation of nutrition at a low water temperature. They are made up of a glass drum heater, covered with plastic casing for extra durability and protection. They are long lasting and resistant to damage in normal situations. They have an adjustable variable temperature range from 20C to 34C with a deviation of 1C...
These quality Bimex Rosmalen heaters have been designed to regulate the temperature of the water to avoid crystallisation of nutrition at a low water temperature. They are made up of a glass drum heater, covered with plastic casing for extra durability and protection. They are long lasting and resistant to damage in normal situations. They have an adjustable variable temperature range from 20C to 34C with a deviation of 1C...
These quality Bimex Rosmalen heaters have been designed to regulate the temperature of the water to avoid crystallisation of nutrition at a low water temperature. They are made up of a glass drum heater, covered with plastic casing for extra durability and protection. They are long lasting and resistant to damage in normal situations. They have an adjustable variable temperature range from 20C to 34C with a deviation of 1C...
Efficient Cooling Technology
The exclusive use of high-quality compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP (Coefficient Of Performance) contributing to significant energy savings.
Digital Thermostat
Intuitive setting of functions and accurate temperature detection, resolution 0.1°C/0.2°F. The..
Efficient Cooling Technology
The exclusive use of high-quality compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP (Coefficient Of Performance) contributing to significant energy savings.
Digital Thermostat
Intuitive setting of functions and accurate temperature detection, resolution 0.1°C/0.2°F. The setti..
High Refrigerating technology
The exclusive use of internationally recognised high-performance rotary compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP – coefficient of performance – contributing to remarkable energy savings.
Digital Thermostat
The setting of functions is intuitive and the temperat..
High Refrigerating technology
The exclusive use of internationally recognised high-performance rotary compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP – coefficient of performance – contributing to remarkable energy savings.
Digital Thermostat
The setting of functions is intuitive and the temperat..
Efficient Cooling Technology
high-efficiency heat exchanger in titanium
ecological refrigeration units
rotative compressors
reduced energy consumption
extremely low noise levels
Easy In-line Installation
no need for specialised technicians
1½” water intake/output couplings
external installation
Digital Thermostat
easy set-up
temperature maintenance set with a differential of 1°C
temperature range 5°C – 35°C
vis..
Efficient Cooling Technology
high-efficiency heat exchanger in titanium
ecological refrigeration units
rotative compressors
reduced energy consumption
extremely low noise levels
Easy In-line Installation
no need for specialised technicians
1½” water intake/output couplings
external installation
Digital Thermostat
easy set-up
temperature maintenance set with a differential of 1°C
temperature range 5°C – 35°C
vis..
Efficient Cooling Technology
high-efficiency heat exchanger in titanium
ecological refrigeration units
rotative compressors
reduced energy consumption
extremely low noise levels
Easy In-line Installation
no need for specialised technicians
1½” water intake/output couplings
external installation
Digital Thermostat
easy set-up
temperature maintenance set with a differential of 1°C
temperature range 5°C – 35°C
vis..
The Ballast Basic is a digitally controlled relay controller that can switch 5x600W + Heater. Thanks to the digital control, this relay controller has great features.
For example, it has a digital display and a digital time clock, which is easy to operate. During the clock setting process you can choose between a 24-hour cycle or an asymmetrical cycle. In case of the asymmetric timer, you can set your own preferences for the duration of the cycle (maximum..
ROOT!T Hobby 11 W Heat Mats are essential for early propagation. Creating a gentle heat when placed under a propagator, they will keep the cold at bay protecting your seedlings.
Size: 350mm x 250mm..
ROOT!T Hobby 60 W Heat Mats are essential for early propagation. Creating a gentle heat when placed under a propagator, they will keep the cold at bay protecting your seedlings.
Size: 1200mm x 400mm..
The Hydor ETH External Thermal Heater is the first unique external heater for reservoirs with the exclusive PTC (Positive Thermal Coefficient) technology.
The self-timing PTC heating element guarantees maximum safety against any risk of overheating and blowing. This extra safe element and the durable materials used mean that this heater is both energy efficient, safe and long lasting.
The ETH heater can only be used vertically, it is ideal to use in a ca..
The ROOT!T Heat Mat Thermostat helps maintain the optimum rooting temperature for faster seedling and cutting growth. It does so by allowing you greater control over your growing environment, by monitoring the temperature and switching your heat mat on and off as required, within a pre-defined temperature range.
An easy to read digital display ensures that users are able to monitor temperatures and take action where required.
Key USPs:
1..
ROOT!T Hobby 30 W Heat Mats are essential for early propagation. Creating a gentle heat when placed under a propagator, they will keep the cold at bay protecting your seedlings.
Size: 600 mm x 400 mm..
Insulated mat to place underneath your heated propagation mat. This will ensure that all heat produced is directed upward into your proagator and not lost into work tops...
Insulated mat to place underneath your heated propagation mat. This will ensure that all heat produced is directed upward into your proagator and not lost into work tops...
Insulated mat to place underneath your heated propagation mat. This will ensure that all heat produced is directed upward into your propagator and not lost into work tops...
The LightHouse 3kW Greenhouse Heater is a great tool to use when trying to maintain temperatures during the cooler months. The 3kW powerful output means it can quickly and effectively heat up large spaces. It also allows growers to reach and preserve the desired temperature allowing their plants to thrive. The simple but robust design allows growers to easily use and place in a busy grow room environment. Also, the added feature of 3 power control of diffe..
A handy convector heater with 3 heat settings and overheat protection. The room thermostat is adjustable, allowing for temperature to be easily controlled. Ideal for home and individual use when additional heat is required.
3 Heat settings: 750W, 1250W and 2000W.
Adjustable room thermostat , Overheat protection, LED power indicator...
A compact plug-in wall heater with 2 speed settings and an ultra-quiet fan. The heat thermostat is adjustable, allowing for temperature to be easily controlled. This space saving, portable heater can be plugged directly into the wall with a rotating plug for convenient access to any socket, making it quick and easy to use when additional heat is required.
Space saving design for ultimate portability
Adjustable heat thermostat from 15°C to 32°C
12-Hour..
The timer III is built with high quality components such as Hager timer Germany and Iskra contactors Slowenia. A serious housing with cover and seal joint result a high protection class of IP44. On 2 safety breaker you can switch ON/OFF the power circuits.
The timer box III is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. All model with heating socket is ..
The timer III is built with high quality components such as Hager timer Germany and Iskra contactors Slowenia. A serious housing with cover and seal joint result a high protection class of IP44. On 3 safety breaker you can switch ON/OFF the power circuits.
The timer box III is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. All model with heating socket is ..
The timer III is built with high quality components such as Hager timer Germany and Iskra contactors Slowenia. A serious housing with cover and seal joint result a high protection class of IP44. On 1-3 safety breaker you can switch ON/OFF the power circuits.
The timer box III is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. All model with heating socket i..
High quality growing system nutrient tank heat mats from Ultratherm simply place underneath your nutrient tank this will in time keep your water temperatures perfect, thermostatic controller sold separately...
These Ora Oil filled heaters are an easy and energy efficient way of providing low-cost, constant background heating to your grow room. Having a portable oil filled radiator makes warming up your growing rooms easy – you can move it around whenever necessary without disrupting anything from your grow room set-up.
11 Fin 2500W with interrogated timer
Three heat settings: 1000W / 1500W / 2500W
Thermostatic control within the three heat settings
Coverag..
These Ora Oil filled heaters are an easy and energy efficient way of providing low-cost, constant background heating to your grow room. Having a portable oil filled radiator makes warming up your growing rooms easy – you can move it around whenever necessary without disrupting anything from your grow room set-up.
Three heat settings: 400W / 600W / 1000W
Thermostatic control within the three heat settings
Coverage: Heats up to 10m2
Overheat protection..
Thanks to its high airflow, this effective ORA 3KW PTC ceramic space heater is ideal for keeping the surrounding area of medium to large grows warm.
Features multi-stage temperature control with three heat settings, and a separate cold air stage.
Integrated cut off thermostat and overheating protection
Fan post-cooling function to cool down components
Fan motor with thermal protection
Easy to transport and operate
Ceramic PTC heating drum..
Aaffordable 2KW compact Metal fan heater.
Power 2000 KW
Dimensions 19.7 x 19.7 x 20.5CM
Air Displacement - 120 m3/hr
Heating Area - 40 m3
Weight - 2.06KG
IP21 Protection..
The Hylite Slimline 28W 300mm Tubular Heater With Thermostat is the only tube heater on the market which can be used floor standing or wall mounted, and which features a patented built-in thermostat, which keeps energy usage to a minimum...
Ultra Flat Grow Room Heater
This perfectly flat, ultra light heater can be easily suspended by a single hook. It is humidity resistant meaning it can be used in almost any environment. It can be rolled up for easy storage and transportation.
A built in economical stabiliser maintains the temperature at 65°. This heating system reproduces the effects of the sun for flowers and plants without burning oxygen.
Voltage: 220-250 V
Weight: 360 ..
The EarlyGrow Heated Windowsill Propagator is great to grow a variety of plants, utilising the 3 bay design. Made out of a robust plastic, with a shatterproof lid, our Windowsill Propagator is resistant to bumps, knocks and drops. The heated tray means you can get your plants underway early by instigating germination at a set temperature between 16-19 degrees centigrade.
Adjustable ventilation
Lightweight tray with no holes
12 Watt
54.5cm x 21.5cm x ..
The EarlyGrow Heated 3-Bay Windowsill Propagator with Capillary Mat and Tray is great to grow a variety of plants, utilising the 3 bay design. Made out of a robust plastic, with a shatterproof lid, our Heated 3-Bay Windowsill Propagator with Capillary Mat and Tray is resistant to bumps, knocks and drops. The Capillary Mat and Tray allow your plants to self water meaning you can leave your plants for a period of time without worry. The built in heater also ..
The EarlyGrow Heated 2 Bay Propagator with Capillary Mat and Tray is a self-watering propagator whereby the user can fill up the water reservoir and leave their seeds to self-water allowing you to use your time more better spent with friends, family etc. The heated base instigates germination early and creates the optimal growing conditions for young plant growth. The 9 watt heated base creates a soil temperature of approximately 16-19 degrees centigrade, ..
The EarlyGrow Heated Windowsill Propagator is great to grow a variety of plants, utilising the 3 bay design. Made out of a robust plastic, with a shatterproof lid, our Windowsill Propagator is resistant to bumps, knocks and drops. The heated tray means you can get your plants underway early by instigating germination at a set temperature between 16-19 degrees centigrade.
Adjustable ventilation
Lightweight tray with no holes
12 Watt
54.5cm x 21.5cm x ..
The Heated Medium Propagator is made out of a robust plastic, with a shatter resistant lid, making it resistant to bumps, knocks and drops. This Heated Propagator is great to start growing your plants early from seeds or cuttings. The 9 watt heater increases soil temperature up to and around 16-19 degrees centigrade (dependent on the external environment). Because of the increase in temperature germination is instigated early, irrelevant of the weather out..
A major innovation in low-cost, energy-efficient heating, the Grow Gadgets Tube Heater offers discreet mounting brackets for walls or floors with reversible left or right-hand cable entry. At 300mm long, this compact tube heater generates extreme heat with a 90°C overheat protection.
Features:
Thermostat Control
1 Heat Setting
60W No Timer Function
Non-Programmable
Wall-Mounted
Even heat distribution across heater body
Discreet mounting brackets
..
Warms root area 10 – 20 degrees above room temperature.
Speeds germination and encourages strong root growth.
Fits under any standard size seed tray.
High quality and water resistant.
Can be used with thermostat for temperature control...
Warms root area 10 – 20 degrees above room temperature.
Speeds germination and encourages strong root growth.
Fits under any standard size seed tray.
High quality and water resistant.
Can be used with thermostat for temperature control...
Warms root area 10 – 20 degrees above room temperature.
Speeds germination and encourages strong root growth.
Fits under any standard size seed tray.
High quality and water resistant.
Can be used with thermostat for temperature control...
The Electric 2.8kW Professional GroWarm Heater is one of the best ways to keep grow rooms warm during cold weather.
The device is primarily a heater and it can kick out a great amount of warmth via it’s 3 different settings at 1kW, 1.8kW and 2.8kW.
The heater comes with metal lugs on the housing which allows it to be suspended from ceilings, allowing for better air circulation.
Features
3 Power settings for more control over heat o..
Liquid heat has proven to reduce the effects of low temperatures in growing environments on plants, allowing the plants to not only cope but thrive when temperatures drop below 5oC. Liquid Heat is designed to be used by growers who are striving to reach high levels of production economically and with the technology of tomorrow, all year round.
ANTIFREEZE FOR PLANTS
Another unique Evoponic product
Advanced Biostimulant
Protects against stress in cold ..
Designed & manufactured by us especially for high humidity greenhouse use. Supplied with 3metre Mains Lead & Plug and 3metre Sensor Lead.
Stainless Steel Case
For longlife. 265 x 305 x 240mm
(9”dia x 12”long x 91/2”high).
Accurate Temperature
Built in Electronic Thermostat.
Dual Sheathed Elements
Not affected by high humidities. Provides 3kw.
(Elements cut in providing heat as required.)
Large Fan 7.5"
Provides quick,even heat distribution 320..
The Maxiswitch Powerhouse is available with either four, six or eight way control units with heater socket are a professional heavy duty unit that controls your HID lighting by diverting the high electrical loads from a timer to a heavy-duty contractor.
Designed with a solid metal enclosure that can be wall or pole mounted, the Maxiswitch Powerhouse gives you a completely integrated unit perfect for indoor growing environments.
Heavy Duty..
The Maxiswitch Powerhouse is available with either four, six or eight way control units with heater socket are a professional heavy duty unit that controls your HID lighting by diverting the high electrical loads from a timer to a heavy-duty contractor.
Designed with a solid metal enclosure that can be wall or pole mounted, the Maxiswitch Powerhouse gives you a completely integrated unit perfect for indoor growing environments.
Heavy Duty..
The Maxiswitch Powerhouse is available with either four, six or eight way control units with heater socket are a professional heavy duty unit that controls your HID lighting by diverting the high electrical loads from a timer to a heavy-duty contractor.
Designed with a solid metal enclosure that can be wall or pole mounted, the Maxiswitch Powerhouse gives you a completely integrated unit perfect for indoor growing environments.
Heavy Duty..
Heated PVC mat can increase the temperature of the rooting area approx. 15°C higher than the ambient temperature
Suitable for use in humid environments such as propagation and resistant to temporary immersions in water. Can be used with but NOT in contact with animals
Promotes seed germination and plant growth in cold environments where otherwise a heated propagator would be required
55x35cm size for EarlyGrow large sized propagators.
38.5w heated mat ..
The timer box is used to switch several inductive loads such as high-pressure vapor lamps with a high inrush current to switch ON and OFF at the same time. The timer box 4 has a digital display that is based on a 24 hour mechanical timer. With an encoder button left-right and press, It's an easy way setting the clock even faster than a mechanical timer. 48 segments show the current time and the programmed duration at a glance.
The clock has a 12h or 18h cy..
The timer box is used to switch several inductive loads such as high-pressure vapor lamps with a high inrush current to switch ON and OFF at the same time. The timer box 4 has a digital display that is based on a 24 hour mechanical timer. With an encoder button left-right and press, It's an easy way setting the clock even faster than a mechanical timer. 48 segments show the current time and the programmed duration at a glance.
The clock has a 12h or 18h cy..
The timer box is used to switch several inductive loads such as high-pressure vapor lamps with a high inrush current to switch ON and OFF at the same time. The timer box 4 has a digital display that is based on a 24 hour mechanical timer. With an encoder button left-right and press, It's an easy way setting the clock even faster than a mechanical timer. 48 segments show the current time and the programmed duration at a glance.
The clock has a 12h or 18h cy..
An OptiClimate canopy temperature camera can be connected to the system to monitor evaporation from the crop: an excessive canopy temperature is indicative of problems with the plants' evaporation capacity (for example, due too little water or excessive light).
If the canopy temperature rises to an excessive level then the DimLux ballasts are dimmed or switched off until the temperature falls to an acceptable level: failure to lower an excessive canopy te..
It is important to maintain the temperature nutrient solution between 20-24°C as this will ensure better growth rates and is particularly important during the colder season
With water heaters they are only to be used in environments that are very cold. You are not meant to heat the water just remove the chill from it. The water would still seem colder than it would hotter. Feeding your plants warm water is more detrimental than feeding them cold water...
Thermostatically controlled indestructible water heaters. The Bentley of water heaters, how many traditional glass ones have you already been thru? Well never again with these all singing and dancing beauties...
The THEO water heater has all the necessary features for safe and precise temperature maintance of the water in your tank.
The exclusive technology and the high quality of the components guarantee a long lasting product.
Submersible, no thermal shock, high impact resistance, graduated scale, vertical and horizontal positioning, precise maintenance of set temperature...
The HotBox Superb is a 2.7kW electronic Fan Heater. With Winter and Summer settings, it can help to keep your glasshouse cool or warm depending on the season.
HotBox Superb Click for larger image
• Half and full heat settings ensures maximum fuel economy
• Fan only setting use purely for air circulation
• Fitted with feet and hanging loops easy to install in the optimum position
• High output fan (250cfm, 450m3/hr) removes air quickly and efficiently
..
Following into the footsteps of the Hotbox Superb, but by no means standing in its shadow.
The Hotbox Sirocco has all the advantages and privileges of being “born” into the established Hotbox fold, ie a modern design, accurate thermostatic control, a powerful 1.8kW motor as well as our standard 2 year guarantee.
25cm long
21cm diameter
Airflow 400m3/hr or 230cfm..
Cold winter weather can be as much of a problem for indoor gardeners as summer heat, so we are now stocking Hylite greenhouse heaters to keep the frost at bay.
Hylite have designed their heaters to offer a cheap-to-run alternative to fan heaters and cleaner alternative to paraffin. Using less than 50W per foot - about the same as a standard household light bulb - they are a cost effective way to avoid cold stress.
This new slimline range come complete wi..
The 5kW Heater is a great addition to any XL Series or Stealth Series Indoor Air Handler. Maintain nighttime or winter temperatures with ease. Just slide the heater into an access door already made specifically for the heater. Plug the plastic connector onto the control board and use your existing power to the Indoor Air Handler. Next is to set your heating point on your digital thermostat that came with the existing system then let it do its job!
Key Ben..
Heat - Seeds or cuttings are placed on the heated base using any propagation medium. Desired temperature is set – within a range of to 5°C to 30°C - using the digital thermostat. Ultra accurate thermostat probe is placed inside the propagator to read and maintain the desired temperature to within 1°C.
Heat is dispersed evenly across the base, unlike most heated propagators there are no hot or cold spots; so no uneven growth.
Humidity – Vitopod layers and..
High Quality Heated Propagator with Room to Grow. Free starter kit of pots and trays included!
This heat and grow variable temperature propagator is fully adjustable, select between 12C and 28C. Temperature adjustment is easy via the easy-to-use remote thermostat. These utilise a long life 22 watt heater which uses less power than an ordinay light bulb. Fitted plug included...
Adding uniform heat to your plants will speed up germination by days! ROOT!T Heat Mat offers more uniform heating than others on the market with its intricate pattern of fine wire throughout its waterproof, frayproof layers delivering the durability to withstand rugged greenhouse environments.
This mat warms the rooting area to the ideal temperature required for perfect propagation, whether seed-germination or rooting cuttings. A thermostat is also availa..
A new version is now available here: ROOT!T Heat Mat Thermostat.
ROOT!T’s electronic temperature controller is compatible with all heat mats and is an optional accessory for the ROOT!T Heat Mats.
The thermostat controls the temperature of heat mats evenly in colder or warmer than normal environments. It provides constant optimum temperatures for specific plants. It has an easy plug-in operation with an illuminated indicator.
Features:
Easy t..
BioGreen heat mats are ready-to-use with a thermostatic temperature control in the range of 0-40°C.
Rapid germination
Faster growth
Even heat distribution
Spray waterproof, CE approved..
Ultra accurate digital thermostat; ideal fo heat mats or heater cables up to 500w.
Adjust temperature (where applicable) from 5C to 30C, accurate to within 1C...
This propagator is like a mini tunnel house that holds a couple of hundred cuttings, providing ideal humidity and bottom head for rapid rooting.
Large heated area 1200mm long by 500mm wide
Even heat distribution from the heat mat.
Accurate temperature control with thermostat(0-40°C)
Thermostat has a sensor which can be inserted into the actual soil of the seedlings for perfect temperature control where you need it.
High top to accommodate taller plants (5..
The X-Stream Heat combines the humidity retention of the X-Stream lid, along with even heat distribution across the entire base.
Even growth - no hot or cold spots means plants develop at the same rate.
Easy to use - just plug in and the base will automatically shut-off when optimum temperature is reached.
61cm x 42cm x 27cm
Also available with variable thermostat as pictured above.
X-Stream propagators now have SunBlaster-ready lids - c..
The X-Stream Heat combines the humidity retention of the X-Stream lid, along with even heat distribution across the entire base.
Even growth - no hot or cold spots means plants develop at the same rate.
Easy to use - just plug in and the base will automatically shut-off when optimum temperature is reached.
112cm x 62cm x 28cm
Also available with variable thermostat as pictured above.
X-Stream propagators now have SunBlaster-ready lids - ..
HOTBOX Elite greenhouse fan heater with heat output of 2.7kW. The thermostat control cuts the heat supply when the selected temperature is reached but allows the air fan to continue.
This updated model has a new ergonomic handle, wider legs for increased stability, rubberised flex and a thermal safety cut-out.
Fan heaters improve circulation and control the temperature, protecting against frost and cold weather.
The unit can be floor or bench mounted o..
HOTBOX Levant plus greenhouse heater has an output of 1.8kW, linked to a thermostat control which cuts the heat supply.
Fan heaters improve circulation and control the temperature, protecting against frost and cold weather.
These units can be used as fans in the summer months by switching off the heat unit.
They may be used in sheds, garages or conservatories and may be hung from the hooks and chains supplied.
Size 250mm. x 220mm. Diameter
Ideal for..
The DV-14K is a timed relay box which you can use to switch a maximum of 4×600 Watt, or 5×400 watt luminaires on and off. The DV-14K also has a heater contact, which means the heater will come on when the lights go off, keeping a more consistent temperature in the grow room.
Dimensions: 210x290x90mm
Required voltage: 230 Vac/50Hz.
Max. output: 15 Amp
Output heater: 15 Amp
Isolation level: IP-44..
Provides a stable environment to protect plants against sudden temperature and humidity fluctuations.
Helps reduce humidity and condensation when growing indoors thus protecting against fungal attack.
Ideal in propagation areas where a constant ambient temperature is critical...
Voodoo Heat is a brand new bio-stimulant product carefully designed to help plants cope with heat stress problems when growing in adverse conditions...
The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. Model with heating socket is on when lights are off (power management).
Sizes and technical data's:
Case: WxHxD = 200x255x95mm
Timer box: WxHxD = 230x300x110mm
1 Pole incl. connector 16A (EU) 4x600W
1 Pole incl. connector 10A (CH) 3x600W,
Volt: 230V / 50Hz
24h timer with 36h power rese..
The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. Model with heating socket is on when lights are off (power management).
Sizes and technical data's:
Case: WxHxD = 200x255x95mm
Timer box: WxHxD = 230x300x110mm
1 Pole incl. connector 16A (EU) 4x600W
1 Pole incl. connector 10A (CH) 3x600W,
Volt: 230V / 50Hz
24h timer with 36h power reserve 30m..
The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. Model with heating socket is on when lights are off (power management).
Sizes and technical data's:
Case: WxHxD = 200x255x95mm
Timer box: WxHxD = 230x300x110mm
1 Pole incl. connector 16A (EU) 4x600W
1 Pole incl. connector 10A (CH) 3x600W,
Volt: 230V / 50Hz
24h timer with 36h power reserve 30m..
The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. Model with heating socket is on when lights are off (power management).
Sizes and technical data's:
Case: WxHxD = 200x255x95mm
Timer box: WxHxD = 230x300x110mm
1 Pole incl. connector 16A (EU) 4x600W
1 Pole incl. connector 10A (CH) 3x600W,
Volt: 230V / 50Hz
24h timer with 36h power reserve 30m..
The PowerPlant Heat Shield cleverly redirects light and heat from the central 'hot spot' created beneath all horizontally mounted lamps towards growroom extremities. This enable your horizontal reflector to be placed much closer to plants to increase light levels and penetration whilst maintaining similar (often greater) areas of production under each lamp...
The PowerPlant Heat Shield cleverly redirects light and heat from the central 'hot spot' created beneath all horizontally mounted lamps towards growroom extremities. This enable your horizontal reflector to be placed much closer to plants to increase light levels and penetration whilst maintaining similar (often greater) areas of production under each lamp...
The DV-12K is a time controlled relay box with which a maximum 2 x 600 Watt fittings or 2 x 400 Watt fittings can be switched. Next to this, the DV-12K has an outlet for a heater.
Specifications
Dimensions: 110x210x70mm.
Required voltage: 230 Vac/50Hz.
Max. output: 6
Output heater: 6A
Isolation level: IP-44
European Plugs..
The DV-12K is a time controlled relay box with which a maximum 2 x 600 Watt fittings or 2 x 400 Watt fittings can be switched. Next to this, the DV-12K has an outlet for a heater.
The Timer Relay Davin DV28K manages up to 8x600W but unlike traditional timers, when the lights shut down, the heater connected to the third outlet of Davin DV28K (reserved for this connection) takes over and compensates for the lack of heat which could plants suffer.
Combining ..
The DV-14K is a timed relay box which you can use to switch a maximum of 4×600 Watt, or 5×400 watt luminaries on and off. The DV-14K also has a heater contact. Combining serenity and efficiency, all Davin products are equipped with a timer GRASSLIN, which are the most efficient on the indoor horticulture market.
Specifications
2 years warranty.
Dimensions: 210x290x90mm.
Required voltage: 230 Vac/50Hz.
Max. Output: 15A
Output heater: 15A
Isolation ..
The DV-44 is a timed relay box which you can use to switch a maximum of 16×600 Watt, or 20×400 Watt luminaires on and off.
Specifications
Dimensions: 210x290x90mm.
Required voltage: 230 Vac/50Hz.
Max. output: 4×15 Amperé.
Isolation Level: IP-44.
European Plugs..
The DV-33 is a timed relay box which you can use to switch a maximum of 12×600 Watt, or 16×400 Watt luminaires on and off.
Specifications
Dimensions: 210x290x90mm.
Required voltage: 230 Vac/50Hz.
Max. output: 3×15 Amperé.
Isolation level: IP-44.
European Plugs..
Helps Protect Plants from Cold Conditions
Help plants grow and thrive when temperatures drop below 5 degrees Celsius using VitaLink Heat. An advanced bio stimulant designed for use by growers striving to achieve maximum yield, cost-effectively and using advanced technology.
Benefits:
Protects plants against stress in cold and frosty conditions
Prevents flower abortion
Allows side shoots and buds to develop in low temperaturesEncourages growth hormon..
The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The smallest unit of the series, the Ultra 300 emits only 20dB of noise and is therefore even more quiet than a standard household refrigerator..
These quality Bimex Rosmalen heaters have been designed to regulate the temperature of the water to avoid crystallisation of nutrition at a low water temperature. They are made up of a glass drum heater, covered with plastic casing for extra durability and protection. They are long lasting and resistant to damage in normal situations. They have an adjustable variable temperature range from 20C to 34C with a deviation of 1C...
These quality Bimex Rosmalen heaters have been designed to regulate the temperature of the water to avoid crystallisation of nutrition at a low water temperature. They are made up of a glass drum heater, covered with plastic casing for extra durability and protection. They are long lasting and resistant to damage in normal situations. They have an adjustable variable temperature range from 20C to 34C with a deviation of 1C...
These quality Bimex Rosmalen heaters have been designed to regulate the temperature of the water to avoid crystallisation of nutrition at a low water temperature. They are made up of a glass drum heater, covered with plastic casing for extra durability and protection. They are long lasting and resistant to damage in normal situations. They have an adjustable variable temperature range from 20C to 34C with a deviation of 1C...
Efficient Cooling Technology
The exclusive use of high-quality compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP (Coefficient Of Performance) contributing to significant energy savings.
Digital Thermostat
Intuitive setting of functions and accurate temperature detection, resolution 0.1°C/0.2°F. The..
Efficient Cooling Technology
The exclusive use of high-quality compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP (Coefficient Of Performance) contributing to significant energy savings.
Digital Thermostat
Intuitive setting of functions and accurate temperature detection, resolution 0.1°C/0.2°F. The setti..
High Refrigerating technology
The exclusive use of internationally recognised high-performance rotary compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP – coefficient of performance – contributing to remarkable energy savings.
Digital Thermostat
The setting of functions is intuitive and the temperat..
High Refrigerating technology
The exclusive use of internationally recognised high-performance rotary compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP – coefficient of performance – contributing to remarkable energy savings.
Digital Thermostat
The setting of functions is intuitive and the temperat..
Efficient Cooling Technology
high-efficiency heat exchanger in titanium
ecological refrigeration units
rotative compressors
reduced energy consumption
extremely low noise levels
Easy In-line Installation
no need for specialised technicians
1½” water intake/output couplings
external installation
Digital Thermostat
easy set-up
temperature maintenance set with a differential of 1°C
temperature range 5°C – 35°C
vis..
Efficient Cooling Technology
high-efficiency heat exchanger in titanium
ecological refrigeration units
rotative compressors
reduced energy consumption
extremely low noise levels
Easy In-line Installation
no need for specialised technicians
1½” water intake/output couplings
external installation
Digital Thermostat
easy set-up
temperature maintenance set with a differential of 1°C
temperature range 5°C – 35°C
vis..
Efficient Cooling Technology
high-efficiency heat exchanger in titanium
ecological refrigeration units
rotative compressors
reduced energy consumption
extremely low noise levels
Easy In-line Installation
no need for specialised technicians
1½” water intake/output couplings
external installation
Digital Thermostat
easy set-up
temperature maintenance set with a differential of 1°C
temperature range 5°C – 35°C
vis..
The Ballast Basic is a digitally controlled relay controller that can switch 5x600W + Heater. Thanks to the digital control, this relay controller has great features.
For example, it has a digital display and a digital time clock, which is easy to operate. During the clock setting process you can choose between a 24-hour cycle or an asymmetrical cycle. In case of the asymmetric timer, you can set your own preferences for the duration of the cycle (maximum..
ROOT!T Hobby 11 W Heat Mats are essential for early propagation. Creating a gentle heat when placed under a propagator, they will keep the cold at bay protecting your seedlings.
Size: 350mm x 250mm..
ROOT!T Hobby 60 W Heat Mats are essential for early propagation. Creating a gentle heat when placed under a propagator, they will keep the cold at bay protecting your seedlings.
Size: 1200mm x 400mm..
The Hydor ETH External Thermal Heater is the first unique external heater for reservoirs with the exclusive PTC (Positive Thermal Coefficient) technology.
The self-timing PTC heating element guarantees maximum safety against any risk of overheating and blowing. This extra safe element and the durable materials used mean that this heater is both energy efficient, safe and long lasting.
The ETH heater can only be used vertically, it is ideal to use in a ca..
The ROOT!T Heat Mat Thermostat helps maintain the optimum rooting temperature for faster seedling and cutting growth. It does so by allowing you greater control over your growing environment, by monitoring the temperature and switching your heat mat on and off as required, within a pre-defined temperature range.
An easy to read digital display ensures that users are able to monitor temperatures and take action where required.
Key USPs:
1..
ROOT!T Hobby 30 W Heat Mats are essential for early propagation. Creating a gentle heat when placed under a propagator, they will keep the cold at bay protecting your seedlings.
Size: 600 mm x 400 mm..
Insulated mat to place underneath your heated propagation mat. This will ensure that all heat produced is directed upward into your proagator and not lost into work tops...
Insulated mat to place underneath your heated propagation mat. This will ensure that all heat produced is directed upward into your proagator and not lost into work tops...
Insulated mat to place underneath your heated propagation mat. This will ensure that all heat produced is directed upward into your propagator and not lost into work tops...
The LightHouse 3kW Greenhouse Heater is a great tool to use when trying to maintain temperatures during the cooler months. The 3kW powerful output means it can quickly and effectively heat up large spaces. It also allows growers to reach and preserve the desired temperature allowing their plants to thrive. The simple but robust design allows growers to easily use and place in a busy grow room environment. Also, the added feature of 3 power control of diffe..
A handy convector heater with 3 heat settings and overheat protection. The room thermostat is adjustable, allowing for temperature to be easily controlled. Ideal for home and individual use when additional heat is required.
3 Heat settings: 750W, 1250W and 2000W.
Adjustable room thermostat , Overheat protection, LED power indicator...
A compact plug-in wall heater with 2 speed settings and an ultra-quiet fan. The heat thermostat is adjustable, allowing for temperature to be easily controlled. This space saving, portable heater can be plugged directly into the wall with a rotating plug for convenient access to any socket, making it quick and easy to use when additional heat is required.
Space saving design for ultimate portability
Adjustable heat thermostat from 15°C to 32°C
12-Hour..
The timer III is built with high quality components such as Hager timer Germany and Iskra contactors Slowenia. A serious housing with cover and seal joint result a high protection class of IP44. On 2 safety breaker you can switch ON/OFF the power circuits.
The timer box III is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. All model with heating socket is ..
The timer III is built with high quality components such as Hager timer Germany and Iskra contactors Slowenia. A serious housing with cover and seal joint result a high protection class of IP44. On 3 safety breaker you can switch ON/OFF the power circuits.
The timer box III is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. All model with heating socket is ..
The timer III is built with high quality components such as Hager timer Germany and Iskra contactors Slowenia. A serious housing with cover and seal joint result a high protection class of IP44. On 1-3 safety breaker you can switch ON/OFF the power circuits.
The timer box III is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads. All model with heating socket i..
High quality growing system nutrient tank heat mats from Ultratherm simply place underneath your nutrient tank this will in time keep your water temperatures perfect, thermostatic controller sold separately...
These Ora Oil filled heaters are an easy and energy efficient way of providing low-cost, constant background heating to your grow room. Having a portable oil filled radiator makes warming up your growing rooms easy – you can move it around whenever necessary without disrupting anything from your grow room set-up.
11 Fin 2500W with interrogated timer
Three heat settings: 1000W / 1500W / 2500W
Thermostatic control within the three heat settings
Coverag..
These Ora Oil filled heaters are an easy and energy efficient way of providing low-cost, constant background heating to your grow room. Having a portable oil filled radiator makes warming up your growing rooms easy – you can move it around whenever necessary without disrupting anything from your grow room set-up.
Three heat settings: 400W / 600W / 1000W
Thermostatic control within the three heat settings
Coverage: Heats up to 10m2
Overheat protection..
Thanks to its high airflow, this effective ORA 3KW PTC ceramic space heater is ideal for keeping the surrounding area of medium to large grows warm.
Features multi-stage temperature control with three heat settings, and a separate cold air stage.
Integrated cut off thermostat and overheating protection
Fan post-cooling function to cool down components
Fan motor with thermal protection
Easy to transport and operate
Ceramic PTC heating drum..
Aaffordable 2KW compact Metal fan heater.
Power 2000 KW
Dimensions 19.7 x 19.7 x 20.5CM
Air Displacement - 120 m3/hr
Heating Area - 40 m3
Weight - 2.06KG
IP21 Protection..
The Hylite Slimline 28W 300mm Tubular Heater With Thermostat is the only tube heater on the market which can be used floor standing or wall mounted, and which features a patented built-in thermostat, which keeps energy usage to a minimum...
Ultra Flat Grow Room Heater
This perfectly flat, ultra light heater can be easily suspended by a single hook. It is humidity resistant meaning it can be used in almost any environment. It can be rolled up for easy storage and transportation.
A built in economical stabiliser maintains the temperature at 65°. This heating system reproduces the effects of the sun for flowers and plants without burning oxygen.
Voltage: 220-250 V
Weight: 360 ..
The EarlyGrow Heated Windowsill Propagator is great to grow a variety of plants, utilising the 3 bay design. Made out of a robust plastic, with a shatterproof lid, our Windowsill Propagator is resistant to bumps, knocks and drops. The heated tray means you can get your plants underway early by instigating germination at a set temperature between 16-19 degrees centigrade.
Adjustable ventilation
Lightweight tray with no holes
12 Watt
54.5cm x 21.5cm x ..
The EarlyGrow Heated 3-Bay Windowsill Propagator with Capillary Mat and Tray is great to grow a variety of plants, utilising the 3 bay design. Made out of a robust plastic, with a shatterproof lid, our Heated 3-Bay Windowsill Propagator with Capillary Mat and Tray is resistant to bumps, knocks and drops. The Capillary Mat and Tray allow your plants to self water meaning you can leave your plants for a period of time without worry. The built in heater also ..
The EarlyGrow Heated 2 Bay Propagator with Capillary Mat and Tray is a self-watering propagator whereby the user can fill up the water reservoir and leave their seeds to self-water allowing you to use your time more better spent with friends, family etc. The heated base instigates germination early and creates the optimal growing conditions for young plant growth. The 9 watt heated base creates a soil temperature of approximately 16-19 degrees centigrade, ..
The EarlyGrow Heated Windowsill Propagator is great to grow a variety of plants, utilising the 3 bay design. Made out of a robust plastic, with a shatterproof lid, our Windowsill Propagator is resistant to bumps, knocks and drops. The heated tray means you can get your plants underway early by instigating germination at a set temperature between 16-19 degrees centigrade.
Adjustable ventilation
Lightweight tray with no holes
12 Watt
54.5cm x 21.5cm x ..
The Heated Medium Propagator is made out of a robust plastic, with a shatter resistant lid, making it resistant to bumps, knocks and drops. This Heated Propagator is great to start growing your plants early from seeds or cuttings. The 9 watt heater increases soil temperature up to and around 16-19 degrees centigrade (dependent on the external environment). Because of the increase in temperature germination is instigated early, irrelevant of the weather out..
A major innovation in low-cost, energy-efficient heating, the Grow Gadgets Tube Heater offers discreet mounting brackets for walls or floors with reversible left or right-hand cable entry. At 300mm long, this compact tube heater generates extreme heat with a 90°C overheat protection.
Features:
Thermostat Control
1 Heat Setting
60W No Timer Function
Non-Programmable
Wall-Mounted
Even heat distribution across heater body
Discreet mounting brackets
..
Warms root area 10 – 20 degrees above room temperature.
Speeds germination and encourages strong root growth.
Fits under any standard size seed tray.
High quality and water resistant.
Can be used with thermostat for temperature control...
Warms root area 10 – 20 degrees above room temperature.
Speeds germination and encourages strong root growth.
Fits under any standard size seed tray.
High quality and water resistant.
Can be used with thermostat for temperature control...
Warms root area 10 – 20 degrees above room temperature.
Speeds germination and encourages strong root growth.
Fits under any standard size seed tray.
High quality and water resistant.
Can be used with thermostat for temperature control...
The Electric 2.8kW Professional GroWarm Heater is one of the best ways to keep grow rooms warm during cold weather.
The device is primarily a heater and it can kick out a great amount of warmth via it’s 3 different settings at 1kW, 1.8kW and 2.8kW.
The heater comes with metal lugs on the housing which allows it to be suspended from ceilings, allowing for better air circulation.
Features
3 Power settings for more control over heat o..
Liquid heat has proven to reduce the effects of low temperatures in growing environments on plants, allowing the plants to not only cope but thrive when temperatures drop below 5oC. Liquid Heat is designed to be used by growers who are striving to reach high levels of production economically and with the technology of tomorrow, all year round.
ANTIFREEZE FOR PLANTS
Another unique Evoponic product
Advanced Biostimulant
Protects against stress in cold ..
Designed & manufactured by us especially for high humidity greenhouse use. Supplied with 3metre Mains Lead & Plug and 3metre Sensor Lead.
Stainless Steel Case
For longlife. 265 x 305 x 240mm
(9”dia x 12”long x 91/2”high).
Accurate Temperature
Built in Electronic Thermostat.
Dual Sheathed Elements
Not affected by high humidities. Provides 3kw.
(Elements cut in providing heat as required.)
Large Fan 7.5"
Provides quick,even heat distribution 320..
The Maxiswitch Powerhouse is available with either four, six or eight way control units with heater socket are a professional heavy duty unit that controls your HID lighting by diverting the high electrical loads from a timer to a heavy-duty contractor.
Designed with a solid metal enclosure that can be wall or pole mounted, the Maxiswitch Powerhouse gives you a completely integrated unit perfect for indoor growing environments.
Heavy Duty..
The Maxiswitch Powerhouse is available with either four, six or eight way control units with heater socket are a professional heavy duty unit that controls your HID lighting by diverting the high electrical loads from a timer to a heavy-duty contractor.
Designed with a solid metal enclosure that can be wall or pole mounted, the Maxiswitch Powerhouse gives you a completely integrated unit perfect for indoor growing environments.
Heavy Duty..
The Maxiswitch Powerhouse is available with either four, six or eight way control units with heater socket are a professional heavy duty unit that controls your HID lighting by diverting the high electrical loads from a timer to a heavy-duty contractor.
Designed with a solid metal enclosure that can be wall or pole mounted, the Maxiswitch Powerhouse gives you a completely integrated unit perfect for indoor growing environments.
Heavy Duty..
Heated PVC mat can increase the temperature of the rooting area approx. 15°C higher than the ambient temperature
Suitable for use in humid environments such as propagation and resistant to temporary immersions in water. Can be used with but NOT in contact with animals
Promotes seed germination and plant growth in cold environments where otherwise a heated propagator would be required
55x35cm size for EarlyGrow large sized propagators.
38.5w heated mat ..
The timer box is used to switch several inductive loads such as high-pressure vapor lamps with a high inrush current to switch ON and OFF at the same time. The timer box 4 has a digital display that is based on a 24 hour mechanical timer. With an encoder button left-right and press, It's an easy way setting the clock even faster than a mechanical timer. 48 segments show the current time and the programmed duration at a glance.
The clock has a 12h or 18h cy..
The timer box is used to switch several inductive loads such as high-pressure vapor lamps with a high inrush current to switch ON and OFF at the same time. The timer box 4 has a digital display that is based on a 24 hour mechanical timer. With an encoder button left-right and press, It's an easy way setting the clock even faster than a mechanical timer. 48 segments show the current time and the programmed duration at a glance.
The clock has a 12h or 18h cy..
The timer box is used to switch several inductive loads such as high-pressure vapor lamps with a high inrush current to switch ON and OFF at the same time. The timer box 4 has a digital display that is based on a 24 hour mechanical timer. With an encoder button left-right and press, It's an easy way setting the clock even faster than a mechanical timer. 48 segments show the current time and the programmed duration at a glance.
The clock has a 12h or 18h cy..