Up to 100L Reservoir Chiller
Warm water will become the ultimate breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and all kinds of other infections and diseases. Warm water also greatly reduces the oxygen content able to be transported in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have little..
These versatile little pumps have have the ability to work in low water conditions. Features - ABS case and high quality stainless steel shaft, suitable for fresh and sea water and ideal for use with nutrient salts.
Ideal for pumping nutrients in NFT/Flood and Drain applications - Mounted on suction cups for secure location. Includes air pipe.
Designed for continuous use.
650 Litre/Hour - Maximum head of 1.2m
2000 Litre/Hour - Maximum head of 2.8m..
Can be used in low water levels to provide a strong circulation of flow below the water level. The pump produces water columns that rise up 2.4m above the waters surface. 2500 LPH...
They don’t come any more powerful than this! Supercharge your system with these and your plants will be very pleased with you in more ways than one :)..
This versatile high jet pump has a wide range of applications and is fully immersible. Plus it can be used inline (outside water). It is supplied with clip on filter hoods. The pump has a ceramic shaft for fresh and sea water dual use (ideal for handling nutrient solutions). It has a double water-cooled structure for rapid heat dissipation and a super quality ABS plastic case which is anti-alkali and anti-corrosive. This HAILEA pump is mounted on suction c..
Super silent with multi-level muffler. Pump has two outlets with 3.6 l/min from each outlet. The pump also includes an integral variable flow control...
Oil free design provides contamination free air. Designed to run several air stones from a single pump. Robust alloy casing absorbs noise for whisper quiet operation. Ideal for inside or outdoor use. Exceptionally low power consumption from only 10W. Suited to both intermittent and continuous duty use...
Oil free design provides contamination free air. Designed to run several air stones from a single pump. Robust alloy casing absorbs noise for whisper quiet operation. Ideal for inside or outdoor use. Exceptionally low power consumption from only 10W. Suited to both intermittent and continuous duty use...
Oil free design provides contamination free air. Designed to run several air stones from a single pump. Robust alloy casing absorbs noise for whisper quiet operation. Ideal for inside or outdoor use. Exceptionally low power consumption from only 10W. Suited to both intermittent and continuous duty use...
Oil free design provides contamination free air. Designed to run several air stones from a single pump. Robust alloy casing absorbs noise for whisper quiet operation. Ideal for inside or outdoor use. Exceptionally low power consumption from only 35W. Suited to both intermittent and continuous duty use...
Oil free design ensures contamination free pumping. Ergonomic waterproof casing. Double dampening system and anti vibration feet ensure low noise levels. Supplied complete with manifold to run several systems from the same pump. Application ideas include aeration for nutrients, compost tea brewers and bubble features...
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 63 x 73 x 83 mm..
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 90 x 73 x 110 mm..
Up to 150L Reservoir Chiller
Warm water will become the definitive breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and a number of other infections and diseases. Warm water also vastly reduces the oxygen content able to be transported in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have little..
Up to 300L Reservoir Chiller
Warm water ends up being the definitive breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and various other infections and diseases. Warm water also substantially reduces the oxygen content able to be carried in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have littl..
Up to 500L Reservoir Chiller
Warm water ends up being the definitive breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and all kinds of other infections and diseases. Warm water also greatly reduces the oxygen content able to be held in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have little to..
These air curtains are ideal for aerating your nutrient solution or root zone. They do the same job as air stones but are flexible so will fit in virtually any system...
The WaterFarm is a simple quality system that is great for longer term plants and trees. The kit includes a 12 litre reservoir, grow tray, air pump, pumping kit and illustrated easy to follow instructions. This kit comes with a Hailea ACO2201 Pump. The WaterFarm consists of a small air pump that recirculates the nutrient via a drip ring. The plants sit in the Clay Pebbles or a mixture of Clay Pebbles and Coco Coir. An external see-through tube le..
The GHE AquaFarm is a larger version of the GHE WaterFarm. The kit includes a 35 litre reservoir, grow tray, air pump, pumping kit and illustrated easy to follow instructions. This kit comes with a Hailea 75 Pump. The AquaFarm is a simple quality system that is ideal for medium to long term plants or even small trees. It consists of a small air pump the recirculates the nutrient via a drip ring. The plants sit in the Clay Pebbles or a mixture of Clay Pebbl..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 3600 l/hr
Max Lift: 2.6m
Power Consumption: 45W
Dimensions: 359x 135x 162mm
..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 5000 l/hr
Max Lift: 2.5m
Power Consumption: 60W
Dimensions: 359x 135x 162mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 6100 l/hr
Max Lift: 2.1m
Power Consumption: 65W
Dimensions: 359x 135x 162mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 7800 l/hr
Max Lift: 4m
Power Consumption: 80W
Dimensions: 359x 135x 162mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 10000 l/hr
Max Lift: 4.5m
Power Consumption: 135W
Dimensions: 359x 135x 162mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 11300 l/hr
Max Lift: 4.2m
Power Consumption: 155W
Dimensions: 359x 135x 162mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 15200 l/hr
Max Lift: 5.5m
Power Consumption: 210W
Dimensions: 402x 165x 189mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 19100 l/hr
Max Lift: 6.3m
Power Consumption: 318W
Dimensions: 402x 165x 189mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 25000 l/hr
Max Lift: 8.2m
Power Consumption: 620W
Dimensions: 402x 165x 189mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 4800 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 7150 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 10850 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 14200 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 17800 l/hr
Dimensions: 375x 365x 242mm..
Warm water ends up being the definitive breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and all kinds of other infections and diseases. Warm water also greatly reduces the oxygen content able to be held in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have little to no oxygen in it! Consequently..
The Hailea CP series of air pumps are ideal for portable tanks and aquariums; they allow you to manually adjust the flow output to match its user requirements. The pump has the unique feature of using a battery pack for portability so that can run for up to 8 hours at a time. It also has integrated retractable handle for ease of maneuverability. Driven by high quality motor for higher air output. Air output can be adjusted.
This pump enables the user to a..
The Hailea CP series of air pumps are ideal for portable tanks and aquariums; they allow you to manually adjust the flow output to match its user requirements. The pump has the unique feature of using a battery pack for portability so that can run for up to 8 hours at a time. It also has integrated retractable handle for ease of maneuverability. Driven by high quality motor for higher air output. Air output can be adjusted.
This pump enables the user to a..
Ideal for empying large reservoirs or for pumping from distant water sources.
12000 to 25000 litres per hour
Ideal for use in dirty water with particle sizes up to 6mm
Overload protection by means of a thermal overload tip
All the electrical parts are fully encapsulated in synthetic resin..
Up to 100L Reservoir Chiller
Warm water will become the ultimate breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and all kinds of other infections and diseases. Warm water also greatly reduces the oxygen content able to be transported in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have little..
These versatile little pumps have have the ability to work in low water conditions. Features - ABS case and high quality stainless steel shaft, suitable for fresh and sea water and ideal for use with nutrient salts.
Ideal for pumping nutrients in NFT/Flood and Drain applications - Mounted on suction cups for secure location. Includes air pipe.
Designed for continuous use.
650 Litre/Hour - Maximum head of 1.2m
2000 Litre/Hour - Maximum head of 2.8m..
Can be used in low water levels to provide a strong circulation of flow below the water level. The pump produces water columns that rise up 2.4m above the waters surface. 2500 LPH...
They don’t come any more powerful than this! Supercharge your system with these and your plants will be very pleased with you in more ways than one :)..
This versatile high jet pump has a wide range of applications and is fully immersible. Plus it can be used inline (outside water). It is supplied with clip on filter hoods. The pump has a ceramic shaft for fresh and sea water dual use (ideal for handling nutrient solutions). It has a double water-cooled structure for rapid heat dissipation and a super quality ABS plastic case which is anti-alkali and anti-corrosive. This HAILEA pump is mounted on suction c..
Super silent with multi-level muffler. Pump has two outlets with 3.6 l/min from each outlet. The pump also includes an integral variable flow control...
Oil free design provides contamination free air. Designed to run several air stones from a single pump. Robust alloy casing absorbs noise for whisper quiet operation. Ideal for inside or outdoor use. Exceptionally low power consumption from only 10W. Suited to both intermittent and continuous duty use...
Oil free design provides contamination free air. Designed to run several air stones from a single pump. Robust alloy casing absorbs noise for whisper quiet operation. Ideal for inside or outdoor use. Exceptionally low power consumption from only 10W. Suited to both intermittent and continuous duty use...
Oil free design provides contamination free air. Designed to run several air stones from a single pump. Robust alloy casing absorbs noise for whisper quiet operation. Ideal for inside or outdoor use. Exceptionally low power consumption from only 10W. Suited to both intermittent and continuous duty use...
Oil free design provides contamination free air. Designed to run several air stones from a single pump. Robust alloy casing absorbs noise for whisper quiet operation. Ideal for inside or outdoor use. Exceptionally low power consumption from only 35W. Suited to both intermittent and continuous duty use...
Oil free design ensures contamination free pumping. Ergonomic waterproof casing. Double dampening system and anti vibration feet ensure low noise levels. Supplied complete with manifold to run several systems from the same pump. Application ideas include aeration for nutrients, compost tea brewers and bubble features...
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 63 x 73 x 83 mm..
Plastic casing and high quality stainless steel shaft suitable for use in fresh and sea water. Fully adjustable flow regulator. Integral suction cup mounting feet for easy installation. Ability to work in low water levels. Ideal for pumping nutrients in NFT/flood and drain applications.
Dimensions: 90 x 73 x 110 mm..
Up to 150L Reservoir Chiller
Warm water will become the definitive breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and a number of other infections and diseases. Warm water also vastly reduces the oxygen content able to be transported in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have little..
Up to 300L Reservoir Chiller
Warm water ends up being the definitive breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and various other infections and diseases. Warm water also substantially reduces the oxygen content able to be carried in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have littl..
Up to 500L Reservoir Chiller
Warm water ends up being the definitive breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and all kinds of other infections and diseases. Warm water also greatly reduces the oxygen content able to be held in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have little to..
These air curtains are ideal for aerating your nutrient solution or root zone. They do the same job as air stones but are flexible so will fit in virtually any system...
The WaterFarm is a simple quality system that is great for longer term plants and trees. The kit includes a 12 litre reservoir, grow tray, air pump, pumping kit and illustrated easy to follow instructions. This kit comes with a Hailea ACO2201 Pump. The WaterFarm consists of a small air pump that recirculates the nutrient via a drip ring. The plants sit in the Clay Pebbles or a mixture of Clay Pebbles and Coco Coir. An external see-through tube le..
The GHE AquaFarm is a larger version of the GHE WaterFarm. The kit includes a 35 litre reservoir, grow tray, air pump, pumping kit and illustrated easy to follow instructions. This kit comes with a Hailea 75 Pump. The AquaFarm is a simple quality system that is ideal for medium to long term plants or even small trees. It consists of a small air pump the recirculates the nutrient via a drip ring. The plants sit in the Clay Pebbles or a mixture of Clay Pebbl..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 3600 l/hr
Max Lift: 2.6m
Power Consumption: 45W
Dimensions: 359x 135x 162mm
..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 5000 l/hr
Max Lift: 2.5m
Power Consumption: 60W
Dimensions: 359x 135x 162mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 6100 l/hr
Max Lift: 2.1m
Power Consumption: 65W
Dimensions: 359x 135x 162mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 7800 l/hr
Max Lift: 4m
Power Consumption: 80W
Dimensions: 359x 135x 162mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 10000 l/hr
Max Lift: 4.5m
Power Consumption: 135W
Dimensions: 359x 135x 162mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 11300 l/hr
Max Lift: 4.2m
Power Consumption: 155W
Dimensions: 359x 135x 162mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 15200 l/hr
Max Lift: 5.5m
Power Consumption: 210W
Dimensions: 402x 165x 189mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 19100 l/hr
Max Lift: 6.3m
Power Consumption: 318W
Dimensions: 402x 165x 189mm..
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out. Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
Flow: 25000 l/hr
Max Lift: 8.2m
Power Consumption: 620W
Dimensions: 402x 165x 189mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 4800 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 7150 l/hr
Dimensions: 353x 350x 175mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 10850 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 14200 l/hr
Dimensions: 375x 365x 242mm..
High quality aluminium and ceramic shaft ensure long life even in continuous duty. Can be used submersed or inline. Vortex impeller. Can pump suspended solids up to 6mm. Integral thermal cutout. Multi year warranty.
Flow: 17800 l/hr
Dimensions: 375x 365x 242mm..
Warm water ends up being the definitive breeding ground for pythium (root rot), fungus gnat larvae, any tank dwelling pests, fungi, viruses and all kinds of other infections and diseases. Warm water also greatly reduces the oxygen content able to be held in the water, ie the warmer the water, the less oxygen content in the water no matter if you are air infusing or dosing with h202; if the water is warm then you have little to no oxygen in it! Consequently..
The Hailea CP series of air pumps are ideal for portable tanks and aquariums; they allow you to manually adjust the flow output to match its user requirements. The pump has the unique feature of using a battery pack for portability so that can run for up to 8 hours at a time. It also has integrated retractable handle for ease of maneuverability. Driven by high quality motor for higher air output. Air output can be adjusted.
This pump enables the user to a..
The Hailea CP series of air pumps are ideal for portable tanks and aquariums; they allow you to manually adjust the flow output to match its user requirements. The pump has the unique feature of using a battery pack for portability so that can run for up to 8 hours at a time. It also has integrated retractable handle for ease of maneuverability. Driven by high quality motor for higher air output. Air output can be adjusted.
This pump enables the user to a..
Ideal for empying large reservoirs or for pumping from distant water sources.
12000 to 25000 litres per hour
Ideal for use in dirty water with particle sizes up to 6mm
Overload protection by means of a thermal overload tip
All the electrical parts are fully encapsulated in synthetic resin..