The FloraFlex® FloraCap® (4 inch) is a revolutionary tool for top feeding that also helps eliminate algae. Place the FloraCap® on top of your 4 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with FloraClips. Each cap features 17 flower designed louvers that deliver water, nutrients, and air to the medium while blocking light. The FloraCap® strategically covers the top of the med..
he FloraFlex® 6″ FloraCap® is a patent pending revolutionary tool for top feeding that also helps eliminate algae. The FloraCap® 2.0 was redesigned to give you a more consistent flow rate, even distribution, a slightly increased air flow, and improved stabilization. Place the FloraCap® on top of your 6 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with FloraClips. Each cap feat..
The FloraFlex® FloraClip 2.0 easily transforms your FloraCap® from a top-feeding unit into an automated top-feeding system.
Now simply clasp the FloraClip over your 1/4″ OD tubing (instead of threading it through the opening) and clip it to your preferred location on the FloraCap®. Then sit back and let your FloraCap® do the rest!
We recommend you use (2) FloraClips per FloraCap®.
Use (2) FloraClips 2.0 with a FloraCap® and Tubing (1/4” OD) to automate..
The FloraFlex® FloraCap® is a revolutionary tool for top feeding that also helps eliminate algae. If cared for properly you can get multiple uses out of this tool. Place the Single Use FloraCap® on top of your 6 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with built in holes for tubing. Each cap features strategically designed slots that deliver water and nutrients to the med..
FloraFlex® Drip Shields provide a superior drip system. Place the Drip Shield on top of a 6” rockwool cube and enjoy countless combinations as you mix and match any of the following products utilizing the Drip Shield’s two inserts: Short Plunge Drippers, Long Plunge Drippers, Short Rocket Drippers and Eliminators. By covering the meidia, the Drip Shield blocks light allowing roots to flourish and eliminates algae.
Compatible with all 6” rockwool cubes.
..
FloraFlex® Long Plunge Drippers are used with the Drip Shield. FloraFlex® drippers are all strategically designed to be a Subsurface Drip System with water and nutrients delivered straight to the root zone of your plants. Water and nutrients travel down a 1, 2, or 4 GPH torturous path, the drops then fall 3/4” below the surface dispensing out of the three slots at its bottom.
1/4” Barbed Nozzle.
Use with the FloraFlex® Drip Shield.
Self-Cleaning..
The FloraFlex® Round Flood and Drip Shield + Quicker Dripper instantly gives you control over your feeding plan and was designed for those who want a faster feed than the Gravity Drippers. Place the Round Flood and Drip Shield on top of your plant and use the built in measuring table to fill the reservoir with water and nutrients. Quicker Drippers pop into the 5 holes and slowly deliver the exact amount of water and nutrients you want to distribute to your..
The FloraFlex® Tubing is a flexible premium vinyl, food grade hose. At 1/4” OD, our Tubing fits perfectly with ALL FloraFlex® tools. Color coordinate and automate!
100 feet in length.
1/4” OD.
3/16” ID.
Flexible premium vinyl.
FloraFlex® Green.
FloraFlex® Logo printed on the tubing...
The FloraFlex® Bubbler is an 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool.
Completely gutted inside to allow maximum pressure while still evenly distributing water.
1/2” inlet which seamlessly screws into our Quick Disconnect without glue
8 barbed ports that connect to 1/4” OD Tubing
Rubber grip on top for easy use
ABS Pla..
The FloraFlex® Bubbler Flow Insert allows you to deliver water to your plants at your desired flow rate (2, 6, 10, or 20 GPH). Use with FloraFlex® Multi Flow Bubbler.
Quick loading available in 2 (YELLOW), 6 (BLACK), 10 (RED) & 20 (BLUE) GPH
Use with your FloraFlex® Open Flow Bubbler
Color coded for easy recognition
Sold in packs of 12...
The FloraFlex® Quick Disconnect Pipe System is an eight outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly.
Assembled Unit Includes:
Flora Pipe Fitting 3/4”
Flora Valve
Quick Disconnect
Open Flow Bubbler
20-60 psi..
The FloraFlex® Quick Disconnect tool easily connects your Flora Valve to your FloraFlex® Bubbler. Eliminates the need for using Teflon Tape during manifold assembly. Allows you to effortlessly disconnect the bubbler for cleaning purposes.
3/4” Garden hose connection on one side and standard 1/2” thread that connects to Flora Flex Bubblers on the other
No threading required
Leak free design
Rubber grip for easy use
ABS Plastic..
The FloraFlex® shut off valve also allows you to control the pressure of water and nutrients being delivered through the manifold to your plants. Easily snaps into the Flora Pipe Fitting T or Elbow and screws into the Quick Disconnect.
Flora Pipe Fittings “T” and “Elbow,” snap into this unit with no glue required
Connects with ForaFlex GHP to NPT Quick Disconnect, no threading required
Manual off and on action, with easy to use valve handle
Max..
The FloraFlex® Pipe Fitting T (1” or 3/4”) allows you to connect multiple manifolds to your PVC line. Glue your PVC to the Flora Pipe fitting and then easily snap the Fitting into the Flora Valve.
Compatible with regular 1” or ¾” PVC pipe.
Attaches to Flora Valve with snap feature (no glue required).
O-Ring included.
Available in 1″ or 3/4″.
O-Ring should be lubed (if not already) for easy install and prevention of leakage.
120 psi
PVC..
The FloraFlex® Pipe Fitting Elbow (1” or 3/4”) is used for the last manifold on your PVC line. Glue your PVC to the Flora Pipe Fitting and then easily snap the Fitting into the Flora Valve.
Compatible with regular 1” or ¾” PVC pipe.
Attaches to Flora Valve with snap feature (no glue required).
O-Ring included.
Available in 1″ or 3/4″.
O-Ring should be lubed (if not already) for easy install and prevention of leakage.
120 psi
PVC..
The FloraFlex® Matrix System is a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your potted plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. The Matrix was not designed to be suspended above, but rather directly on top of, or touching the medium. There are two dimensions for each unit, the larger one is the outer diameter. Measure you..
The FloraFlex® Matrix Pad is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator.
Water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushe..
The FloraFlex® Stackers allow you to stack your 4” rockwool cube onto a 6” rockwool cube, or a 6″ rockwool cube onto a 8″ rockwool cube. The Stackers conserve space in your Veg room by allowing you to use a smaller medium and then add on to it with a bigger medium during your flip to Flower...
The FloraFlex® Air Bleed Valve (3/4”) should be installed at the highest point (above manifold) on any mainline to prevent air locks. When water starts to flow, air is forced out of the Air Bleed Valve. When water hits the valve, the valve closes and water flows freely through the line. This product gives you more control over the accuracy of your feedings.⠀
¾” Male pipe thread
Max operating pressure 80 psi
Min operating pressure 5 psi (opens when pre..
The FloraFlex® Matrix Circulator is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator.
With the FloraFlex® Matrix System water and nutrients travel into the Circulator, ..
FloraMax Cloner is a protective stem dip for treating cuttings prior to planting.
Its specialized gel formulation provides a protective coating on the cut-end. This helps seal the wound and prevent air bubbles from entering the stem tissue.
Has an indefinite shelf-life and is resistant to drying-out.
Has high resistance to cross contamination and does not go rank in the bottle.
Dosage:
Predip cuttings prior to planting
Bac..
Prevents blocked drippers and build-up in hydroponics, coco and soil systems
Will System Maintenance improve the effective working life of nutrient batches?
Yes, provided light ingress and evaporation are minimized, shade (or bury) the reservoir to minimize nutrient temperature, and avoid the use of sugary additives such as carbohydrates and molasses. With a super-stable nutrient such as Veg-1 or VegaFlora and their associated additives, batches ca..
The FloraFlex® FloraCap® (4 inch) is a revolutionary tool for top feeding that also helps eliminate algae. Place the FloraCap® on top of your 4 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with FloraClips. Each cap features 17 flower designed louvers that deliver water, nutrients, and air to the medium while blocking light. The FloraCap® strategically covers the top of the med..
he FloraFlex® 6″ FloraCap® is a patent pending revolutionary tool for top feeding that also helps eliminate algae. The FloraCap® 2.0 was redesigned to give you a more consistent flow rate, even distribution, a slightly increased air flow, and improved stabilization. Place the FloraCap® on top of your 6 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with FloraClips. Each cap feat..
The FloraFlex® FloraClip 2.0 easily transforms your FloraCap® from a top-feeding unit into an automated top-feeding system.
Now simply clasp the FloraClip over your 1/4″ OD tubing (instead of threading it through the opening) and clip it to your preferred location on the FloraCap®. Then sit back and let your FloraCap® do the rest!
We recommend you use (2) FloraClips per FloraCap®.
Use (2) FloraClips 2.0 with a FloraCap® and Tubing (1/4” OD) to automate..
The FloraFlex® FloraCap® is a revolutionary tool for top feeding that also helps eliminate algae. If cared for properly you can get multiple uses out of this tool. Place the Single Use FloraCap® on top of your 6 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with built in holes for tubing. Each cap features strategically designed slots that deliver water and nutrients to the med..
FloraFlex® Drip Shields provide a superior drip system. Place the Drip Shield on top of a 6” rockwool cube and enjoy countless combinations as you mix and match any of the following products utilizing the Drip Shield’s two inserts: Short Plunge Drippers, Long Plunge Drippers, Short Rocket Drippers and Eliminators. By covering the meidia, the Drip Shield blocks light allowing roots to flourish and eliminates algae.
Compatible with all 6” rockwool cubes.
..
FloraFlex® Long Plunge Drippers are used with the Drip Shield. FloraFlex® drippers are all strategically designed to be a Subsurface Drip System with water and nutrients delivered straight to the root zone of your plants. Water and nutrients travel down a 1, 2, or 4 GPH torturous path, the drops then fall 3/4” below the surface dispensing out of the three slots at its bottom.
1/4” Barbed Nozzle.
Use with the FloraFlex® Drip Shield.
Self-Cleaning..
The FloraFlex® Round Flood and Drip Shield + Quicker Dripper instantly gives you control over your feeding plan and was designed for those who want a faster feed than the Gravity Drippers. Place the Round Flood and Drip Shield on top of your plant and use the built in measuring table to fill the reservoir with water and nutrients. Quicker Drippers pop into the 5 holes and slowly deliver the exact amount of water and nutrients you want to distribute to your..
The FloraFlex® Tubing is a flexible premium vinyl, food grade hose. At 1/4” OD, our Tubing fits perfectly with ALL FloraFlex® tools. Color coordinate and automate!
100 feet in length.
1/4” OD.
3/16” ID.
Flexible premium vinyl.
FloraFlex® Green.
FloraFlex® Logo printed on the tubing...
The FloraFlex® Bubbler is an 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool.
Completely gutted inside to allow maximum pressure while still evenly distributing water.
1/2” inlet which seamlessly screws into our Quick Disconnect without glue
8 barbed ports that connect to 1/4” OD Tubing
Rubber grip on top for easy use
ABS Pla..
The FloraFlex® Bubbler Flow Insert allows you to deliver water to your plants at your desired flow rate (2, 6, 10, or 20 GPH). Use with FloraFlex® Multi Flow Bubbler.
Quick loading available in 2 (YELLOW), 6 (BLACK), 10 (RED) & 20 (BLUE) GPH
Use with your FloraFlex® Open Flow Bubbler
Color coded for easy recognition
Sold in packs of 12...
The FloraFlex® Quick Disconnect Pipe System is an eight outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly.
Assembled Unit Includes:
Flora Pipe Fitting 3/4”
Flora Valve
Quick Disconnect
Open Flow Bubbler
20-60 psi..
The FloraFlex® Quick Disconnect tool easily connects your Flora Valve to your FloraFlex® Bubbler. Eliminates the need for using Teflon Tape during manifold assembly. Allows you to effortlessly disconnect the bubbler for cleaning purposes.
3/4” Garden hose connection on one side and standard 1/2” thread that connects to Flora Flex Bubblers on the other
No threading required
Leak free design
Rubber grip for easy use
ABS Plastic..
The FloraFlex® shut off valve also allows you to control the pressure of water and nutrients being delivered through the manifold to your plants. Easily snaps into the Flora Pipe Fitting T or Elbow and screws into the Quick Disconnect.
Flora Pipe Fittings “T” and “Elbow,” snap into this unit with no glue required
Connects with ForaFlex GHP to NPT Quick Disconnect, no threading required
Manual off and on action, with easy to use valve handle
Max..
The FloraFlex® Pipe Fitting T (1” or 3/4”) allows you to connect multiple manifolds to your PVC line. Glue your PVC to the Flora Pipe fitting and then easily snap the Fitting into the Flora Valve.
Compatible with regular 1” or ¾” PVC pipe.
Attaches to Flora Valve with snap feature (no glue required).
O-Ring included.
Available in 1″ or 3/4″.
O-Ring should be lubed (if not already) for easy install and prevention of leakage.
120 psi
PVC..
The FloraFlex® Pipe Fitting Elbow (1” or 3/4”) is used for the last manifold on your PVC line. Glue your PVC to the Flora Pipe Fitting and then easily snap the Fitting into the Flora Valve.
Compatible with regular 1” or ¾” PVC pipe.
Attaches to Flora Valve with snap feature (no glue required).
O-Ring included.
Available in 1″ or 3/4″.
O-Ring should be lubed (if not already) for easy install and prevention of leakage.
120 psi
PVC..
The FloraFlex® Matrix System is a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your potted plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. The Matrix was not designed to be suspended above, but rather directly on top of, or touching the medium. There are two dimensions for each unit, the larger one is the outer diameter. Measure you..
The FloraFlex® Matrix Pad is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator.
Water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushe..
The FloraFlex® Stackers allow you to stack your 4” rockwool cube onto a 6” rockwool cube, or a 6″ rockwool cube onto a 8″ rockwool cube. The Stackers conserve space in your Veg room by allowing you to use a smaller medium and then add on to it with a bigger medium during your flip to Flower...
The FloraFlex® Air Bleed Valve (3/4”) should be installed at the highest point (above manifold) on any mainline to prevent air locks. When water starts to flow, air is forced out of the Air Bleed Valve. When water hits the valve, the valve closes and water flows freely through the line. This product gives you more control over the accuracy of your feedings.⠀
¾” Male pipe thread
Max operating pressure 80 psi
Min operating pressure 5 psi (opens when pre..
The FloraFlex® Matrix Circulator is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator.
With the FloraFlex® Matrix System water and nutrients travel into the Circulator, ..
FloraMax Cloner is a protective stem dip for treating cuttings prior to planting.
Its specialized gel formulation provides a protective coating on the cut-end. This helps seal the wound and prevent air bubbles from entering the stem tissue.
Has an indefinite shelf-life and is resistant to drying-out.
Has high resistance to cross contamination and does not go rank in the bottle.
Dosage:
Predip cuttings prior to planting
Bac..
Prevents blocked drippers and build-up in hydroponics, coco and soil systems
Will System Maintenance improve the effective working life of nutrient batches?
Yes, provided light ingress and evaporation are minimized, shade (or bury) the reservoir to minimize nutrient temperature, and avoid the use of sugary additives such as carbohydrates and molasses. With a super-stable nutrient such as Veg-1 or VegaFlora and their associated additives, batches ca..