The Variispeed Single Fan Speed Controller adjusts and controls the speed of your fans. This then ensures a long life for the fan motor. It has variable speed control along with full power or completely off and is suitable for up to 300w...
The SPC is a twin fan controller that automatically adjusts the speed of inlet and exhaust extraction fans to maintain a set temperature. It is the perfect controller for mid to large sized grow rooms.
There is no need to adjust the speed of the fans yourself as The SPC will do this for you automatically.
The SPC gradually increases and decreases the fans speed in perfect synchronization so you will always have negative air pressure inside the room as wel..
The Prima Controller - combined fan speed controller and thermostat which controls exhaust and intake fans. This can be wired to fans, program your requirements and it will do the rest. The Prima Controller has three analogue dials:
one dial sets the best temperature for the controller to maintain
one dial sets the minimum airflow for the inlet fan
one dial sets the minimum airflow for the outlet fan
This ensures continuous air flow, regardless of t..
The minimum speed controller is a temperature depended speed controller for ventilated rooms with one or more fans. The minimum speed controller keeps the temperature constantly and impedes to run under the set minimum-speed. It can be easily controlled, adjusting the required temperature and the minimum speed on two knobs.
The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistan..
The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. It can be easily controlled, adjusting the required temperature, minimum speed and the pressure of your room on four knobs. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.
The control..
The RAM AIR-PRO is an intelligent low noise hydroponic fan speed controller, designed to control an extractor and intake fan thermostatically. Automatically monitors and keeps desired room temperature and air pressure. Simple to use plug and play hydroponic fan speed controller, all you have to do is plug in the fans, set the required air temperature and fan speed/ balance and the AIR-PRO will do the rest.
Air-Pro twin fan speed controller is suitable for..
The Twin Controller Mk2 makes it easy to control IN and OUT fans to maintain temperature and negative pressure.
Features:
Easy to set Just dial in temperature and min/max fan speeds.
Fans operate between min and max settings to maintain temperature
SMSCOM 'Motion Flow' software guarantees the smoothest fan operation
No sudden jumps in fan speed for high level accuracy and a quieter running system
Highly accurate temperature maintenance of +/1 degre..
The Twin Controller Mk2 makes it easy to control IN and OUT fans to maintain temperature and negative pressure.
Features:
Easy to set Just dial in temperature and min/max fan speeds.
Fans operate between min and max settings to maintain temperature
SMSCOM 'Motion Flow' software guarantees the smoothest fan operation
No sudden jumps in fan speed for high level accuracy and a quieter running system
Highly accurate temperature maintenance of +/1 degre..
The RAM AIR-PRO is an intelligent and silent indoor climate controller, designed to control extraction and intake fans thermostatically, monitoring and keeping a desired room temperature and air pressure. All you have to do is plug in the fans, set the required air temperature and fan speed/balance and the RAM AIR-PRO will do the rest. It will maintain a continuous temperature in the room and give full control over negative pressure. The RAM Air-PRO featur..
The Davin DV-11 fancontroller is designed to easily run an electrical motor at a desired speed. With the DV11 you can set the speed of your extractor or inlet fan, for example. The DV11 is protected by a 6 Amp thermal fuse.
The thermal fuse ensures that the DV11 switches off with a short-circuit or overloading. The advantage of the thermal fuse is that when the problem has been fixed you only need to press the "reset" button and the DV11 starts working ag..
The Davin DV-11-T fancontroller with thermostat is designed to keep the temperature in your greenhouse or any kind of room, under control. With the DV-11-T you set the desired temperature, and connect the extractor fan to it. You then set the minimum and maximum speed of your motor so it never runs faster or slower then desired.
The thermal fuse ensures that the DV-11-T switches off with a short-circuit or overloading. The advantage of the thermal fuse is..
The DV 11-TII is a thermostatically controlled ventilation system for an EXHAUSTER or BLOWER, with minimum and maximum regulation for both engines.
Specifications
Dimensions: 110x210x70mm.
Required voltage: 230 Vac/50Hz.
Max. output: 6A
Isolation level: IP-44.
European Plugs..
Silently controls both intake and exhaust fans, allowing negative pressure to be maintained.
Totally silent operation.
Controls both intake and exhaust fans, allowing negative pressure to be maintained.
5 speed settings.
Heavy duty steel casing.
Design and manufactured in the UK.
..
This controller adjusts fans to run at different speeds during lights-on and lights-off periods – and it runs them silently.
That’s not all though, it powers an oscillating fan when lights are on and a heater when lights are off.
Silently controls both intake and exhaust fans
Adjusts fans to run at different speeds during lights-on and lights-off periods
5 speed settings
Heavy duty steel casing
Design and manufactured in the UK..
EC is a new motor architecture (available in all Q-Max and Max-Fan Pro Series extractors) that represents a step forward in the sector, since it considerably improves the aerodynamic efficiency in relation with power consumption, what means better features with less power. Moreover, this technology is compatible with the EC Controller.
The Can-Fan EC Controller controls the speed of the air extractors connected to the unit in an efficient and silent way. ..
Fan Controller Options:
Single Fan Connection:
Run one temperature controlled out-take fan from the controller.
Twin Fan Connection:
Run two or more temperature controlled out-take/in-take fans from one controller by adding “Y” splitter cables - Use smaller in-take fans to achieve negative pressure.
Controller & Balancer Connection:
Connect the balancer to the controller to run two independently, speed controlled out-take/in-tak..
This EC fan controller with LCD display, keyboard and power led allows a very easy setting and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and rounds per minute of the exhaust fan. A built in light sensor in the probe recognize day/night modes.
The EC fan controller comes with power adaptor 1m cable, a 4m sensor cable and 2x 4m fan cable including all conn..
The most versatile fan controller on the market, the GHC Multi-fan controller runs virtually any fan available with no worries.
The Multi-fan controller gives growers full control over what type of fan they control on intake and extract (e.g. Hyperfan/Box fan etc.), has a fan balancer built in, can control day & night temperatures and can adjust day and night humidity levels.
EC fans (such as Hyperfan) are becoming more and more popular due to their o..
With advanced digital temperature-sensing technology, the Super-Pro Air-Pro Fan Controllers are the perfect addition for any grower looking to regulate the output of in-line duct fans, keeping air flow under control.
The Air-Pro E1 Smart Controller is designed to maintain a constant temperature inside the room by keeping airflow under control.
This smart controller uses specialised motion flow software to react to the surrounding temperature. Whe..
Super-Pro Air-Pro T-Series Fan Controller
With advanced digital temperature-sensing technology, the Super-Pro Air-Pro Fan Controllers are the perfect addition for any grower looking to regulate the output of in-line duct fans, keeping air flow under control.
Air-Pro is a 5-speed Fan Controller. It can automatically adjust the wind speed through software technology to maintain a constant temperature and control airflow. The Air-Pro Fan Speed Con..
Super-Pro Air-Pro T-Series Fan Controller
With advanced digital temperature-sensing technology, the Super-Pro Air-Pro Fan Controllers are the perfect addition for any grower looking to regulate the output of in-line duct fans, keeping air flow under control.
Air-Pro is a 5-speed Fan Controller. It can automatically adjust the wind speed through software technology to maintain a constant temperature and control airflow. The Air-Pro Fan Speed Con..
Super-Pro Air-Pro T-Series Fan Controller
With advanced digital temperature-sensing technology, the Super-Pro Air-Pro Fan Controllers are the perfect addition for any grower looking to regulate the output of in-line duct fans, keeping air flow under control.
Air-Pro is a 5-speed Fan Controller. It can automatically adjust the wind speed through software technology to maintain a constant temperature and control airflow. The Air-Pro Fan Speed Con..
The Rhino 2EC + RH Fan Controller is the ultimate controller offering precision control over intake and out-take fans, with separate day and night settings. The digital sensor monitors the temperature, humidity and light, whilst the controller automatically maintains the environment to the desired settings.
The built-in fan balancer enables negative pressure to be established accurately to 1% of fan speed. The intake fan will remain off unt..
The Rhino 2EC controller is a small but powerful EC controller with built-in fan balancer. It controls and balances Rhino Ultra Fans, allowing you to fine tune your environment to create negative pressure. Thermostatic control keeps the temperature perfectly at set point, maintaining the environment. It plugs directly into Rhino Ultra Fans, so there is no need for an external power supply, allowing complete fan control with maximum and minimum ..
The Rhino 1EC fan controller is the perfect solution for controlling
an out-take fan. It has minimum and maximum fan speed settings, enabling
you to have full control over your extraction fan. Thermostatic control
keeps the temperature perfectly at set point, maintaining the
environment. It plugs directly into Rhino Ultra Fans, so there is no
need for an external power supply, allowing for complete fan control.
Thermostatically control your fanS..
The Variispeed Single Fan Speed Controller adjusts and controls the speed of your fans. This then ensures a long life for the fan motor. It has variable speed control along with full power or completely off and is suitable for up to 300w...
The SPC is a twin fan controller that automatically adjusts the speed of inlet and exhaust extraction fans to maintain a set temperature. It is the perfect controller for mid to large sized grow rooms.
There is no need to adjust the speed of the fans yourself as The SPC will do this for you automatically.
The SPC gradually increases and decreases the fans speed in perfect synchronization so you will always have negative air pressure inside the room as wel..
The Prima Controller - combined fan speed controller and thermostat which controls exhaust and intake fans. This can be wired to fans, program your requirements and it will do the rest. The Prima Controller has three analogue dials:
one dial sets the best temperature for the controller to maintain
one dial sets the minimum airflow for the inlet fan
one dial sets the minimum airflow for the outlet fan
This ensures continuous air flow, regardless of t..
The minimum speed controller is a temperature depended speed controller for ventilated rooms with one or more fans. The minimum speed controller keeps the temperature constantly and impedes to run under the set minimum-speed. It can be easily controlled, adjusting the required temperature and the minimum speed on two knobs.
The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistan..
The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. It can be easily controlled, adjusting the required temperature, minimum speed and the pressure of your room on four knobs. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.
The control..
The RAM AIR-PRO is an intelligent low noise hydroponic fan speed controller, designed to control an extractor and intake fan thermostatically. Automatically monitors and keeps desired room temperature and air pressure. Simple to use plug and play hydroponic fan speed controller, all you have to do is plug in the fans, set the required air temperature and fan speed/ balance and the AIR-PRO will do the rest.
Air-Pro twin fan speed controller is suitable for..
The Twin Controller Mk2 makes it easy to control IN and OUT fans to maintain temperature and negative pressure.
Features:
Easy to set Just dial in temperature and min/max fan speeds.
Fans operate between min and max settings to maintain temperature
SMSCOM 'Motion Flow' software guarantees the smoothest fan operation
No sudden jumps in fan speed for high level accuracy and a quieter running system
Highly accurate temperature maintenance of +/1 degre..
The Twin Controller Mk2 makes it easy to control IN and OUT fans to maintain temperature and negative pressure.
Features:
Easy to set Just dial in temperature and min/max fan speeds.
Fans operate between min and max settings to maintain temperature
SMSCOM 'Motion Flow' software guarantees the smoothest fan operation
No sudden jumps in fan speed for high level accuracy and a quieter running system
Highly accurate temperature maintenance of +/1 degre..
The RAM AIR-PRO is an intelligent and silent indoor climate controller, designed to control extraction and intake fans thermostatically, monitoring and keeping a desired room temperature and air pressure. All you have to do is plug in the fans, set the required air temperature and fan speed/balance and the RAM AIR-PRO will do the rest. It will maintain a continuous temperature in the room and give full control over negative pressure. The RAM Air-PRO featur..
The Davin DV-11 fancontroller is designed to easily run an electrical motor at a desired speed. With the DV11 you can set the speed of your extractor or inlet fan, for example. The DV11 is protected by a 6 Amp thermal fuse.
The thermal fuse ensures that the DV11 switches off with a short-circuit or overloading. The advantage of the thermal fuse is that when the problem has been fixed you only need to press the "reset" button and the DV11 starts working ag..
The Davin DV-11-T fancontroller with thermostat is designed to keep the temperature in your greenhouse or any kind of room, under control. With the DV-11-T you set the desired temperature, and connect the extractor fan to it. You then set the minimum and maximum speed of your motor so it never runs faster or slower then desired.
The thermal fuse ensures that the DV-11-T switches off with a short-circuit or overloading. The advantage of the thermal fuse is..
The DV 11-TII is a thermostatically controlled ventilation system for an EXHAUSTER or BLOWER, with minimum and maximum regulation for both engines.
Specifications
Dimensions: 110x210x70mm.
Required voltage: 230 Vac/50Hz.
Max. output: 6A
Isolation level: IP-44.
European Plugs..
Silently controls both intake and exhaust fans, allowing negative pressure to be maintained.
Totally silent operation.
Controls both intake and exhaust fans, allowing negative pressure to be maintained.
5 speed settings.
Heavy duty steel casing.
Design and manufactured in the UK.
..
This controller adjusts fans to run at different speeds during lights-on and lights-off periods – and it runs them silently.
That’s not all though, it powers an oscillating fan when lights are on and a heater when lights are off.
Silently controls both intake and exhaust fans
Adjusts fans to run at different speeds during lights-on and lights-off periods
5 speed settings
Heavy duty steel casing
Design and manufactured in the UK..
EC is a new motor architecture (available in all Q-Max and Max-Fan Pro Series extractors) that represents a step forward in the sector, since it considerably improves the aerodynamic efficiency in relation with power consumption, what means better features with less power. Moreover, this technology is compatible with the EC Controller.
The Can-Fan EC Controller controls the speed of the air extractors connected to the unit in an efficient and silent way. ..
Fan Controller Options:
Single Fan Connection:
Run one temperature controlled out-take fan from the controller.
Twin Fan Connection:
Run two or more temperature controlled out-take/in-take fans from one controller by adding “Y” splitter cables - Use smaller in-take fans to achieve negative pressure.
Controller & Balancer Connection:
Connect the balancer to the controller to run two independently, speed controlled out-take/in-tak..
This EC fan controller with LCD display, keyboard and power led allows a very easy setting and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and rounds per minute of the exhaust fan. A built in light sensor in the probe recognize day/night modes.
The EC fan controller comes with power adaptor 1m cable, a 4m sensor cable and 2x 4m fan cable including all conn..
The most versatile fan controller on the market, the GHC Multi-fan controller runs virtually any fan available with no worries.
The Multi-fan controller gives growers full control over what type of fan they control on intake and extract (e.g. Hyperfan/Box fan etc.), has a fan balancer built in, can control day & night temperatures and can adjust day and night humidity levels.
EC fans (such as Hyperfan) are becoming more and more popular due to their o..
With advanced digital temperature-sensing technology, the Super-Pro Air-Pro Fan Controllers are the perfect addition for any grower looking to regulate the output of in-line duct fans, keeping air flow under control.
The Air-Pro E1 Smart Controller is designed to maintain a constant temperature inside the room by keeping airflow under control.
This smart controller uses specialised motion flow software to react to the surrounding temperature. Whe..
Super-Pro Air-Pro T-Series Fan Controller
With advanced digital temperature-sensing technology, the Super-Pro Air-Pro Fan Controllers are the perfect addition for any grower looking to regulate the output of in-line duct fans, keeping air flow under control.
Air-Pro is a 5-speed Fan Controller. It can automatically adjust the wind speed through software technology to maintain a constant temperature and control airflow. The Air-Pro Fan Speed Con..
Super-Pro Air-Pro T-Series Fan Controller
With advanced digital temperature-sensing technology, the Super-Pro Air-Pro Fan Controllers are the perfect addition for any grower looking to regulate the output of in-line duct fans, keeping air flow under control.
Air-Pro is a 5-speed Fan Controller. It can automatically adjust the wind speed through software technology to maintain a constant temperature and control airflow. The Air-Pro Fan Speed Con..
Super-Pro Air-Pro T-Series Fan Controller
With advanced digital temperature-sensing technology, the Super-Pro Air-Pro Fan Controllers are the perfect addition for any grower looking to regulate the output of in-line duct fans, keeping air flow under control.
Air-Pro is a 5-speed Fan Controller. It can automatically adjust the wind speed through software technology to maintain a constant temperature and control airflow. The Air-Pro Fan Speed Con..
The Rhino 2EC + RH Fan Controller is the ultimate controller offering precision control over intake and out-take fans, with separate day and night settings. The digital sensor monitors the temperature, humidity and light, whilst the controller automatically maintains the environment to the desired settings.
The built-in fan balancer enables negative pressure to be established accurately to 1% of fan speed. The intake fan will remain off unt..
The Rhino 2EC controller is a small but powerful EC controller with built-in fan balancer. It controls and balances Rhino Ultra Fans, allowing you to fine tune your environment to create negative pressure. Thermostatic control keeps the temperature perfectly at set point, maintaining the environment. It plugs directly into Rhino Ultra Fans, so there is no need for an external power supply, allowing complete fan control with maximum and minimum ..
The Rhino 1EC fan controller is the perfect solution for controlling
an out-take fan. It has minimum and maximum fan speed settings, enabling
you to have full control over your extraction fan. Thermostatic control
keeps the temperature perfectly at set point, maintaining the
environment. It plugs directly into Rhino Ultra Fans, so there is no
need for an external power supply, allowing for complete fan control.
Thermostatically control your fanS..