Temperature is one of the most important environmental factors in your grow room / glasshouse all plants have an optimum temperature at which they will grow at and a minimum and maximum temperature that they can survive therefore temperature is very important to the health & growth rate of all plants.
The Evolution digital temperature control System constantly monitors the temperature in the growing area and independently controls fans, heaters and hu..
The EMS-Pro is the culmination of a lengthy research and development program at Ecotechnics, our design goal was to create a simple usb sensor to measure temperature, humidity & CO2 levels and to record them for later analysis.
Key features:
Plug and play USB sensor
Windows compatible
Realtime graphics display
Records all levels for graphing
1 year warranty..
This is the new digital precision timer from Ecotechnics to replace their old individual timers.
Specifications:
4A maximum load
7 day cycle
Accurate timer
Solid state zero crossing
Standard IEC output
1 year warranty..
The new Evolution PPM Controller is an intelligent level controller for CO₂ and offers a reliable, low cost solution to CO₂ control. It can be used with gas regulators or propane burners for long term stable CO₂ readings.
Simple to use
Self-learning auto tune
Low cost CO₂ control
Solid state sensor
1 year warranty..
Monitors and controls the levels of temperature and humidity in your growing area. It runs a maximum of 7 amps of fan load and has a 0–10 volt DC output that can be used to run EC fans or can be connected to one or more units if more than 7 amps of load needs to be controlled.
day/night settings
7 amp ac voltage
0-10 volt dc fan output..
The Ecotechnics PowerStar Pro Contactors have been specifically designed to allow the timed switching of horticultural lighting and appliances. In use the PowerStar Pro Contactor is very simple and should provide years of trouble free use. All Powerstar Pro’s have 1m cable for the sockets and plugs.
Many novice growers tend to use a 24 Hour timer found in their local DIY shop to set the day length in their growroom. This type of 24 Hour timer is not desig..
The Ecotechnics PowerStar Pro Contactors have been specifically designed to allow the timed switching of horticultural lighting and appliances. In use the PowerStar Pro Contactor is very simple and should provide years of trouble free use. All Powerstar Pro’s have 1m cable for the sockets and plugs.
Many novice growers tend to use a 24 Hour timer found in their local DIY shop to set the day length in their growroom. This type of 24 Hour timer is not desig..
EcoTechnics Mini Diamond Reflector mini diamond for 315, 400 and 600w lamps The newest addition to the diamond reflector range has been manufactured so that a 315w CDM bulb sits perfectly centrally. Used with 400w and 600w HID bulbs they produce a uniform light spread over a 1.2m square area...
Temperature is one of the most important environmental factors in your grow room / glasshouse all plants have an optimum temperature at which they will grow at and a minimum and maximum temperature that they can survive therefore temperature is very important to the health & growth rate of all plants.
The Evolution digital temperature control System constantly monitors the temperature in the growing area and independently controls fans, heaters and hu..
The EMS-Pro is the culmination of a lengthy research and development program at Ecotechnics, our design goal was to create a simple usb sensor to measure temperature, humidity & CO2 levels and to record them for later analysis.
Key features:
Plug and play USB sensor
Windows compatible
Realtime graphics display
Records all levels for graphing
1 year warranty..
This is the new digital precision timer from Ecotechnics to replace their old individual timers.
Specifications:
4A maximum load
7 day cycle
Accurate timer
Solid state zero crossing
Standard IEC output
1 year warranty..
The new Evolution PPM Controller is an intelligent level controller for CO₂ and offers a reliable, low cost solution to CO₂ control. It can be used with gas regulators or propane burners for long term stable CO₂ readings.
Simple to use
Self-learning auto tune
Low cost CO₂ control
Solid state sensor
1 year warranty..
Monitors and controls the levels of temperature and humidity in your growing area. It runs a maximum of 7 amps of fan load and has a 0–10 volt DC output that can be used to run EC fans or can be connected to one or more units if more than 7 amps of load needs to be controlled.
day/night settings
7 amp ac voltage
0-10 volt dc fan output..
The Ecotechnics PowerStar Pro Contactors have been specifically designed to allow the timed switching of horticultural lighting and appliances. In use the PowerStar Pro Contactor is very simple and should provide years of trouble free use. All Powerstar Pro’s have 1m cable for the sockets and plugs.
Many novice growers tend to use a 24 Hour timer found in their local DIY shop to set the day length in their growroom. This type of 24 Hour timer is not desig..
The Ecotechnics PowerStar Pro Contactors have been specifically designed to allow the timed switching of horticultural lighting and appliances. In use the PowerStar Pro Contactor is very simple and should provide years of trouble free use. All Powerstar Pro’s have 1m cable for the sockets and plugs.
Many novice growers tend to use a 24 Hour timer found in their local DIY shop to set the day length in their growroom. This type of 24 Hour timer is not desig..
EcoTechnics Mini Diamond Reflector mini diamond for 315, 400 and 600w lamps The newest addition to the diamond reflector range has been manufactured so that a 315w CDM bulb sits perfectly centrally. Used with 400w and 600w HID bulbs they produce a uniform light spread over a 1.2m square area...