The CleanLight technique is a clean and effective way of protecting and strengthening the crops.
How does CleanLight work?
CleanLight is based on UV technology. We have known that UV light kills fungi for more than 100 years. However, this early knowledge concerned very high doses of UV light. If crops were exposed to this kind of dosage, then people, crops and biological control would be at risk. So conventional UV disinfection is not applicab..
The CleanLight Air is a professional grower grade air filtration system that fights bacteria, viruses, and fungi in your grow room. Designed, tested, and manufactured in the European Union, the CleanLight Air is made of high quality components.
The CleanLight Air treats areas up to 100 cubic meters or around 3500 cubic feet. The square footage this equates to varies depending on the size of your ceiling. This will treat 437 square feet in grow rooms with ..
Airbourne insects are attracted to ultraviolet (UV) light. UV light placed behind an electric grid can be used to attract and electrocute flying insects. Such traps are usually a requirement in food preparation establishments such as butchers, for hygiene. They are also found at holiday resorts and commercial green houses to reduce pests. A domestic scale bug killer is available for general use...
This little device allows you to gently bend the branches of your plants so they can receive more light than if they grew naturally. As the plant grows, BendZ are clipped to the stems which change their growing direction...
By clipping on more, you can sculpt the shape of your plant to provide maximum light penetration and increase flower development. After a week or so they can be removed and the bend will remain, they can then be used elsewhere on the p..
The Shield Large diffuser is capable of covering areas of up to 60m2.
The Shield Spider Mite repellent diffuser is the simplest way to help prevent and protect plants against unwanted visitors without the need of spray. The Shield diffuser uses micron technology to deliver microscopic particles in the air, thus we recommend the Shield diffuser is used after eradicating any immediate infestation with the Shield RTU to ensure your crops are protected. At ..
The Shield Large diffuser is capable of covering areas of up to 25m2.
The Shield Spider Mite repellent diffuser is the simplest way to help prevent and protect plants against unwanted visitors without the need of spray.
The Shield diffuser uses micron technology to deliver microscopic particles in the air, thus we recommend the Shield diffuser is used after eradicating any immediate infestation with the Shield RTU to ensure your crops are protected. At t..
For Hydro-X Info:
The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.
For Aqua-X Info:
The TrolMaster DSP-1 program device module (timer module) works like a multi-function irrigation timer. The timers for the DSP-1 can be set to..
Specially designed for the control of CO2 devices in the Hydro-X Control System. CO2 control relay, single pack with cable set.
Features:
LED Power Indicator
3-Prong Attaching Plug
RJ12 Cable Socket
Addressing
Plug & Play
Contents:
1 x Device Station
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter..
Specially designed for the control of 240V temperature devices in the Hydro-X Control System. 240V temperature control relay, single pack with cable set. Same as the DST-1 except 240v instead of 120v.
Features:
LED Power Indicator
3-Prong Attaching Plug
RJ12 Cable Socket
Addressing
Plug & Play
Contents:
1 x Device Station
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter
Specifications:
Input Voltage: 240 VAC, 50/60Hz
Out..
Specially designed for the control of 240V humidity devices in the Hydro-X Control System. 240V humidity control relay, single pack with cable set.
Features:
LED Power Indicator
3-Prong Attaching Plug
RJ12 Cable Socket
Addressing
Plug & Play
Contents:
1 x Device Station
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter
Specifications:
Input Voltage: 240 VAC, 50/60Hz
Output Current: 10A
Output Voltage: 100~240 VAC..
The TECOnnect Wi-Fi Device is compatible with the HY500, HY1000 & HY2000 TECO Chillers.
The added benefit of Wi-Fi connectivity with an optional App means easy connectivity and effortless monitoring of your chillers. It allows growers to change the temperature of their nutrients remotely, monitoring the conditions and reacting to climatic conditions. For example, if the weather is warmer over a weekend you could remotely drop the nutrient temperature ..
The TrolMaster DSP-2 program device module (timer module) works like a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 240 volts or less can be controlled by the DSP-2.
Features
LED Power Indicator
RJ12 Cable Socket
Addressing
Plug & Play
Specifications
Input Voltage: 100~240 VAC, 50/60Hz
Output Current: 10A
Output Voltage: 100~2..
The CleanLight technique is a clean and effective way of protecting and strengthening the crops.
How does CleanLight work?
CleanLight is based on UV technology. We have known that UV light kills fungi for more than 100 years. However, this early knowledge concerned very high doses of UV light. If crops were exposed to this kind of dosage, then people, crops and biological control would be at risk. So conventional UV disinfection is not applicab..
The CleanLight Air is a professional grower grade air filtration system that fights bacteria, viruses, and fungi in your grow room. Designed, tested, and manufactured in the European Union, the CleanLight Air is made of high quality components.
The CleanLight Air treats areas up to 100 cubic meters or around 3500 cubic feet. The square footage this equates to varies depending on the size of your ceiling. This will treat 437 square feet in grow rooms with ..
Airbourne insects are attracted to ultraviolet (UV) light. UV light placed behind an electric grid can be used to attract and electrocute flying insects. Such traps are usually a requirement in food preparation establishments such as butchers, for hygiene. They are also found at holiday resorts and commercial green houses to reduce pests. A domestic scale bug killer is available for general use...
This little device allows you to gently bend the branches of your plants so they can receive more light than if they grew naturally. As the plant grows, BendZ are clipped to the stems which change their growing direction...
By clipping on more, you can sculpt the shape of your plant to provide maximum light penetration and increase flower development. After a week or so they can be removed and the bend will remain, they can then be used elsewhere on the p..
The Shield Large diffuser is capable of covering areas of up to 60m2.
The Shield Spider Mite repellent diffuser is the simplest way to help prevent and protect plants against unwanted visitors without the need of spray. The Shield diffuser uses micron technology to deliver microscopic particles in the air, thus we recommend the Shield diffuser is used after eradicating any immediate infestation with the Shield RTU to ensure your crops are protected. At ..
The Shield Large diffuser is capable of covering areas of up to 25m2.
The Shield Spider Mite repellent diffuser is the simplest way to help prevent and protect plants against unwanted visitors without the need of spray.
The Shield diffuser uses micron technology to deliver microscopic particles in the air, thus we recommend the Shield diffuser is used after eradicating any immediate infestation with the Shield RTU to ensure your crops are protected. At t..
For Hydro-X Info:
The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.
For Aqua-X Info:
The TrolMaster DSP-1 program device module (timer module) works like a multi-function irrigation timer. The timers for the DSP-1 can be set to..
Specially designed for the control of CO2 devices in the Hydro-X Control System. CO2 control relay, single pack with cable set.
Features:
LED Power Indicator
3-Prong Attaching Plug
RJ12 Cable Socket
Addressing
Plug & Play
Contents:
1 x Device Station
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter..
Specially designed for the control of 240V temperature devices in the Hydro-X Control System. 240V temperature control relay, single pack with cable set. Same as the DST-1 except 240v instead of 120v.
Features:
LED Power Indicator
3-Prong Attaching Plug
RJ12 Cable Socket
Addressing
Plug & Play
Contents:
1 x Device Station
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter
Specifications:
Input Voltage: 240 VAC, 50/60Hz
Out..
Specially designed for the control of 240V humidity devices in the Hydro-X Control System. 240V humidity control relay, single pack with cable set.
Features:
LED Power Indicator
3-Prong Attaching Plug
RJ12 Cable Socket
Addressing
Plug & Play
Contents:
1 x Device Station
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter
Specifications:
Input Voltage: 240 VAC, 50/60Hz
Output Current: 10A
Output Voltage: 100~240 VAC..
The TECOnnect Wi-Fi Device is compatible with the HY500, HY1000 & HY2000 TECO Chillers.
The added benefit of Wi-Fi connectivity with an optional App means easy connectivity and effortless monitoring of your chillers. It allows growers to change the temperature of their nutrients remotely, monitoring the conditions and reacting to climatic conditions. For example, if the weather is warmer over a weekend you could remotely drop the nutrient temperature ..
The TrolMaster DSP-2 program device module (timer module) works like a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 240 volts or less can be controlled by the DSP-2.
Features
LED Power Indicator
RJ12 Cable Socket
Addressing
Plug & Play
Specifications
Input Voltage: 100~240 VAC, 50/60Hz
Output Current: 10A
Output Voltage: 100~2..