Search
Search
Product Compare (0)
Barbed Female Connector
Barbed irrigation fittings for use with LDPE pipe, hose & porous pipe...
£1.95
Ex Tax:
13mm - 4mm Cross Connector
Irrigation pipe and fittings can be used when you need to water and feed several plants at the same time. They are great for pot culture, drip systems, homemade hydroponic irrigation systems and can also be used outside to water hanging baskets, pots and raised beds...
£1.95
Ex Tax:
Dripper Line Connector
High quality fitting made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions...
£1.95
Ex Tax:
13mm Barbed to 1/2" Thread Connector
Allows a barb fitting off a tank or reservoir. Ideal for a 20mm hole...
£2.95
Ex Tax:
13mm Barbed to 3/4" Thread Connector (Internal and External Thread)
Allows a barb fitting off a tank or reservoir. Ideal for a 27mm hole. The inner thread allows for both internal and external barb fittings...
£2.95
Ex Tax:
3/8" BSP Female to 1/4" BSP Male Connector - Fixed for CO2 Kit
The 3/8" BSP Female to 1/4" BSP Male Connector - Fixed for CO2 Kit is a high quality CO2 spare part...
£9.95
Ex Tax:
E40 to 315 Lamp Adapter
Do you love using your Maxibright DAYLIGHT 315 but miss using it with your favourite reflector? Well GOOD NEWS those days are over! You can now use any HID reflector with an E40 lamp holder with the DAYLIGHT 315 by using the handy E40 Adaptor! How does it work? Simply screw the E40 Adaptor into the E40 lamp holder then fit the PHILIPS 315W Lamp into the E40 Adaptor and your ready to go!..
£10.95
Ex Tax:
13mm Barb to Snap-On Female Hose Connector
13mm Barb to Snap-On Female Hose Connector..
£3.95
Ex Tax:
Trolmaster (ECS-3) RJ12 to Threaded Waterproof Connector converter cable
The ECS-3 provides a 5/8” diameter connector for some of Fluence brands LED fixtures using Threaded Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / Threaded Waterproof Connector cable. Contains: 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to 3pin IP67 converter cable 1 x T-shaped Splitter..
£25.95
Ex Tax:
Telos h Connector
Link up your Telos lights with just one power cable using the Telos h Connector. Its waterproof and compatible design can be used with the Telos Link Cable for a versatile lighting system. These connectors are made and tested by Wieland Electrical, they are safe, secure and and are protected up to IP66. Rated current: 16 A Rated voltage: 250 V Rated voltage2: 400 V Rated impulse voltage: 4 kV Ingress protection: IP66 Note: Its important to limit t..
£10.95
Ex Tax:
NIDO Connector Valve
Quick connection valva for the NIDO Hydroponics Automations system...
£25.95
Ex Tax:
Trolmaster (ECS-5) RJ12 to PushLock Converter Cable - Hydro-X
The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable. Contains 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to PushLock Waterproof Connector converter cable 1 x T-shaped Splitter Please note: Lead time 1-2 weeks...
£52.95
Ex Tax:
-12ft-RJ12-to-4-pin-IP65-Connector-Cable-228x228.jpg "Trolmaster (ECS-9) 12ft RJ12 to 4-pin IP65 Connector Cable")
Trolmaster (ECS-9) 12ft RJ12 to 4-pin IP65 Connector Cable
The ECS-9 RJ12 to 4pin connector cable is simply a 12 ft cable to use with Lighting Control Adaptor T (LMA-T) and ThinkGrow LEDs with Threaded Waterproof Connectors for interconnecting...
£36.95
Ex Tax:
Large Mixer Tap Connector
Large Mixer Tap Connector conviniently makes watering your garden so much easier. This tap connector is ideal for us with large kitchen taps, and it connects directly to the hose pipe to make light work of watering your garden. The kingfisher large garden tap connector is a part of kingfisher value gardening choice, which provides innovative and practical products at a great price. Robust construction – long lasting Fits most large kitchen taps – highl..
£10.95
Ex Tax:
Blumat T-Piece 8-8-8mm Connector
For use with Blumat 8mm Supply Tube, these high quality fittings allow for a tidy installation of your Blumat irrigation system...
£1.95
Ex Tax:
Blumat Tank Connector
Used to create a watertight connection for 8mm tuning on a tank, bucket, or any water vessel! Comes with a rubber washer and nut, simply drill an 11mm hole in the water vessel and tighten by hand...
£2.95
Ex Tax:
GAS Controller Replacement Probe – Standard Length with Connector
Please contact our technical department if you need help to determine which type of replacement probe you need...
£33.95
Ex Tax:GAS Controller Replacement Probe – Long Length with Connector
Please contact our technical department if you need help to determine which type of replacement probe you need...
£51.95
Ex Tax:
Migro Aray 2 & 4 Connector Bracket
A connection bracket to join multiple ARAY 2 and ARAY 4 models together. You can upgrade your ARAY 2 to an ARAY 4 or connect multiple ARAY 4s together. Complete with 4 x stainless steel Hex Screws for fitting. 270mm or 10.5" long...
£16.95
Ex Tax:
Migro Aray 3 Connector Bracket
A connection bracket to join multiple ARAY 3 models together. Complete with 4 x stainless steel Hex Screws for fitting. 205mm or 8" long..
£16.95
Ex Tax:
Dimlux T Connectors for Alpha Optics 98 Reflector
The DimLux T-piece is designed for linking multiple Alpha Optics reflector 98's simultaneously...
£19.95
Ex Tax:
AutoPot (16mm to 4 x 4mm Quad) X Cross Connector 4 Outlet
AutoPot X cross Connector (16mm to 4 x 4mm)...
£1.49
Ex Tax:
Plug Connector for PE Pipe Coupling - Stop 20x20mm
Plug Connector for PE Pipe Coupling - STOP 20x20mm...
£0.59
Ex Tax:Plug Connector for PE Pipe Coupling - Stop 25x25mm
Plug Connector for PE Pipe Coupling - STOP 25x25mm...
£0.89
Ex Tax:
Plug Connector for PE Pipe Coupling - Valve 16x16mm
Plug Connector for PE Pipe Coupling - VALVE 16x16mm...
£2.49
Ex Tax:Plug Connector for PE Pipe Coupling - Valve 20x20mm
Plug Connector for PE Pipe Coupling - VALVE 20x20mm...
£2.49
Ex Tax:Plug Connector for PE Pipe Coupling - Valve 25x25mm
Plug Connector for PE Pipe Coupling - VALVE 25x25mm...
£2.49
Ex Tax:
Plug Connector for PE Pipe Coupling - 1/2" Valve Male 20mm
Plug Connector for PE Pipe Coupling - 1/2" Valve Male 20mm...
£2.49
Ex Tax:Plug Connector for PE Pipe Coupling - 1/2" Valve Male 16mm
Plug Connector for PE Pipe Coupling - 1/2" Valve Male 16mm...
£2.49
Ex Tax:Plug Connector for PE Pipe Coupling - 3/4" Valve Male 20mm
Plug Connector for PE Pipe Coupling - 3/4" Valve Male 20mm...
£2.49
Ex Tax:Plug Connector for PE Pipe Coupling - 3/4" Valve Male 25mm
Plug Connector for PE Pipe Coupling - 3/4" Valve Male 25mm...
£2.49
Ex Tax:
Plug Connector for PE Pipe Coupling - 3/4" Female Stop
Plug Connector for PE Pipe Coupling - 3/4" Female Stop...
£0.95
Ex Tax:Plug Connector for PE Pipe Coupling - 1" Female Stop
Plug Connector for PE Pipe Coupling - 1" Female Stop...
£0.95
Ex Tax:Plug Connector for PE Pipe Coupling - 1/2" Female Stop
Plug Connector for PE Pipe Coupling - 1/2" Female Stop...
£0.95
Ex Tax:
MaxiLED Propagation LED T Connector and Link Cable
MaxiLED Propagation LED T Connector and Link Cable...
£5.95
Ex Tax:
Pulse 3-way T Connector
Contacts -- 5 Pins on each side Gender -- One male and two females IP Rating -- IP 67 in locked condition UL Certified..
£24.95
Ex Tax:
Pulse 6-way T Connector
Gender -- One Male and Five Females Contacts -- 5 Pins IP Rating -- IP 67 UL Certified..
£48.95
Ex Tax:
Pulse TEROS 12 Retrofit Kit TRS 3.5mm Connector
Already own a Hub-ready sensor? Use a retrofit kit to get it connected to your Hub. Includes: 1x Hub Retrofit Cable or Connector 2x Hub ID & Integration Labels 1x Mini Screwdriver (DIY only) 1x Wiring Diagram (DIY only) NOTE: DIY kits require minor wiring that uses the included screwdriver (estimated 5-10 minute install)...
£86.95
Ex Tax:
Pulse TEROS 12 Retrofit Kit M8 4-pin Connector
Already own a Hub-ready sensor? Use a retrofit kit to get it connected to your Hub. Includes: 1x Hub Retrofit Cable or Connector 2x Hub ID & Integration Labels 1x Mini Screwdriver (DIY only) 1x Wiring Diagram (DIY only) NOTE: DIY kits require minor wiring that uses the included screwdriver (estimated 5-10 minute install). Select the connector type that matches your sensor (bare wires, 4-pin or 3.5mm)...
£86.95
Ex Tax:
