Search
Search
Product Compare (0)
350L Reservoir - Includes Connection Kit
350L Reservoir Plus Connection Kit. Heavy duty tank ideal for creating gravity feed or pumped irrigation systems such as the AutoPot system. The 350L Reservoir Plus Connection Kit can also be used as a secondary source of solution for DualFlow and gully systems...
£96.95
Ex Tax:
Barbed Female Connector
Barbed irrigation fittings for use with LDPE pipe, hose & porous pipe...
£1.95
Ex Tax:
13mm - 4mm Cross Connector
Irrigation pipe and fittings can be used when you need to water and feed several plants at the same time. They are great for pot culture, drip systems, homemade hydroponic irrigation systems and can also be used outside to water hanging baskets, pots and raised beds...
£1.95
Ex Tax:
Dripper Line Connector
High quality fitting made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions...
£1.95
Ex Tax:
13mm Barbed to 1/2" Thread Connector
Allows a barb fitting off a tank or reservoir. Ideal for a 20mm hole...
£2.95
Ex Tax:
13mm Barbed to 3/4" Thread Connector (Internal and External Thread)
Allows a barb fitting off a tank or reservoir. Ideal for a 27mm hole. The inner thread allows for both internal and external barb fittings...
£2.95
Ex Tax:
3/8" BSP Female to 1/4" BSP Male Connector - Fixed for CO2 Kit
The 3/8" BSP Female to 1/4" BSP Male Connector - Fixed for CO2 Kit is a high quality CO2 spare part...
£9.95
Ex Tax:
100L Reservoir with Connection Kit for up to 12 AQUAvalves
Heavy duty tank ideal for creating a gravity feed or pumped irrigation system such as the AutoPot system. The 100L Reservoir plus Connection Kit allows you to make your own bespoke kit for 1-12 pots. This kits also contains all the pipe and fittings you require...
£82.95
Ex Tax:
250L Reservoir with Connection Kit for up to 24 AQUAvalves
Heavy duty tank ideal for creating a gravity feed or pumped irrigation system such as the AutoPot system. The 250L Reservoir plus Connection Kit allows you to make your own bespoke kit for 1-24 pots. This kit also contains all the pipe and fittings you require...
£98.95
Ex Tax:
350L Reservoir with Connection Kit for up to 48 AQUAvalves
Heavy duty tank ideal for creating a gravity feed or pumped irrigation system such as the AutoPot system. The 350L Reservoir plus Connection Kit allows you to make your own bespoke kit for 1-48 pots. This kit also contains all the pipe and fittings you require...
£214.95
Ex Tax:
Guardian Monitor Connect pH/EC/Temp
New Version now available - Click Here The Bluelab Guardian Monitor Connect is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark fo..
£407.95
Ex Tax:
Bluelab pH Controller Connect - Monitor & Doser
Clever monitoring, dosing and data logging of solution pH levels. Made easy. Sometimes the more you know, the better. And when it comes to managing the pH of your nutrient solution, exact knowledge makes a world of difference. Our brainy pH controller connect constantly monitors and fine-tunes the pH levels for you. But more than that, it wirelessly data logs to your computer too, putting continuous information at your fingertips. Use the data to make sy..
£635.95
Ex Tax:
Bluelab Connect Stick
New Version Now Available Get connected – data log and view nutrient measurements from your crop wirelessly. The Bluelab Connect Stick receives wireless data from Bluelab Connect Monitors, logging the data to the cloud. ONE Connect Stick will receive data from multiple Bluelab Connect Devices. Simply place the Connect Stick into a USB port on your computer, download and install the FREE Connect Software from the Bluelab website to begin monitoring crop ..
£87.95
Ex Tax:
Bluelab Connect Range Extender
Boost the range between Bluelab Connect products. The Bluelab Connect Range Extender is required if you need to boost the signal range for wireless monitoring of your crop. Simply plug into a power supply to use when there is a longer distance to cover between Bluelab Connect devices and the Bluelab Connect Stick. For extra-long distances multiple Connect Range Extenders can be used. Features International Power Supply included (may differ from image..
£171.95
Ex Tax:
Ultraviolet Lamp Kit 4W 1/4" Connection
4 litres per minute UV kit, added bacterial control for any supply water. Transformer Fittings Wall mount clips 3 m. Tubing..
£154.95
Ex Tax:
OptiClimate Connection Set
The connection set comes standard with the OptiClimate. Separately available connection sets typically consists of: Magnetic valve LDPE connectors Vibration insulating rubbers with mounting hardware Condensate water connecting nipple Teflon tape Adhesive gel to prevent connectors from loosening over time 7m cord for securing the circuit board, and operating instructions..
£218.95
Ex Tax:
E40 to 315 Lamp Adapter
Do you love using your Maxibright DAYLIGHT 315 but miss using it with your favourite reflector? Well GOOD NEWS those days are over! You can now use any HID reflector with an E40 lamp holder with the DAYLIGHT 315 by using the handy E40 Adaptor! How does it work? Simply screw the E40 Adaptor into the E40 lamp holder then fit the PHILIPS 315W Lamp into the E40 Adaptor and your ready to go!..
£10.95
Ex Tax:
13mm Barb to Snap-On Female Hose Connector
13mm Barb to Snap-On Female Hose Connector..
£3.95
Ex Tax:
GoGro Reservoir Connection Kit Bag
Required for a start-up GoGro System. Includes the correct fittings to attach the GoGro irrigation to the nutrient reservoir. Contains: 13mm Snap-on hose connector (female) 13mm Ratchet clamp ¾”BSP Nut & Tail 13mm Inline Filter 13mm Inline Tap See GoGro 15L & GoGro 25L pots and systems...
£11.95
Ex Tax:
FloraFlex Quick Disconnect Pipe System
The FloraFlex® Quick Disconnect Pipe System is an eight outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. Assembled Unit Includes: Flora Pipe Fitting 3/4” Flora Valve Quick Disconnect Open Flow Bubbler 20-60 psi..
£44.95
Ex Tax:
FloraFlex GHT to NPT Quick Disconnect Set
The FloraFlex® Quick Disconnect tool easily connects your Flora Valve to your FloraFlex® Bubbler. Eliminates the need for using Teflon Tape during manifold assembly. Allows you to effortlessly disconnect the bubbler for cleaning purposes. 3/4” Garden hose connection on one side and standard 1/2” thread that connects to Flora Flex Bubblers on the other No threading required Leak free design Rubber grip for easy use ABS Plastic..
£5.95
Ex Tax:
CDM Horizon Connect Wide-Angle Reflector 2.4m x 1.2m
The Horizon Connect allows you to “Connect” the *Daylight 315W ballast directly to the Horizon wide angle reflector. The Daylight 315 ballast fixes simply to the Horizon Connect by two fixing points, then plug the IEC connectors together and it’s ready to use - a true plug & play product. Compact reflector, ideal to use as standalone or supplement other lighting. Please note: 315 Ballast is sold seperately...
£65.95
Ex Tax:
Maxibright CDM 315W Horizon Connect Wide-Angle Kit
The Horizon Connect allows you to “Connect” the Daylight 315W ballast directly to the Horizon wide angle reflector. The Daylight 315 ballast fixes simply to the Horizon Connect by two fixing points, then plug the IEC connectors together and it’s ready to use - a true plug & play product. Compact reflector, ideal to use as standalone or supplement other lighting. Maxibright Daylight 315W CDM Ballast Digital power pack for CMH/CDM lamps - LEP-style ..
£285.95
Ex Tax:
Techgrow Ballact Connect 6 x 600W with Thermal Protection
The Ballast Connect is a digitally controlled relay controller that controls up to 6 x 600W. Each outlet is individually controlled by hybrid relays: during the switching moment the hybrid relay will switch on every 5 seconds. Thanks to the digital control and the 6 relays, the Ballast Connect has a lot to offer! It has temperature protection, start-up delay, an ammeter, a 24-hour timer, an asymmetrical timer and even a log book function that allows you t..
£435.95
Ex Tax:
Techgrow Ballast Connect Micro 2 x 600W
TechGrow’s Ballast Connect Micro is a digitally controlled relay controller that can switch up to 2 x 600W. Each outlet is individually switched by hybrid relays. Thanks to the digital control and the 2 relays, this controller has a lot to offer. For example, the Ballast Connect Micro has temperature protection and the relays switch on every 5 seconds during switching time. This controller comes without Temp Probe. Features: Suitable for 2 x 600W lig..
£246.95
Ex Tax:
Bluelab Pro Controller Connect
Automated Constant Control of Reservoir pH and Nutrient Levels When connected to a dosing system the Bluelab Pro Controller Connect manages pH, conductivity and temperature levels in reservoirs. As your plants feed, pH and nutrients are automatically adjusted to the desired range. The controller allows you to monitor, data log and control your system in real time for immediate response to personalised settings and system alerts, direct from your compute..
£1,099.95
Ex Tax:
4" - 14" Ducting Connection Kits
Save loads of time with the ducting connection kit. The kit contains a METU clamp with an Allen key, a quick release duct clip, PhonicTrap duct tape and a female coupling...
£22.95
Ex Tax:
Trolmaster (ECS-3) RJ12 to Threaded Waterproof Connector converter cable
The ECS-3 provides a 5/8” diameter connector for some of Fluence brands LED fixtures using Threaded Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / Threaded Waterproof Connector cable. Contains: 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to 3pin IP67 converter cable 1 x T-shaped Splitter..
£25.95
Ex Tax:
Telos h Connector
Link up your Telos lights with just one power cable using the Telos h Connector. Its waterproof and compatible design can be used with the Telos Link Cable for a versatile lighting system. These connectors are made and tested by Wieland Electrical, they are safe, secure and and are protected up to IP66. Rated current: 16 A Rated voltage: 250 V Rated voltage2: 400 V Rated impulse voltage: 4 kV Ingress protection: IP66 Note: Its important to limit t..
£10.95
Ex Tax:
Gavita Interconnect Cables
Interconnect cables are used to join light fixtures using a splitter. Join two splitters and joins splitter to light fixtures...
£6.95
Ex Tax:
Gavita Repeater Bus Interconnect 3m Cable (GAV-ICRB3)
Connects repeater bus light fixtures, direct connection between fixtures. (Slimline or CMH fixtures). Please note: colour may vary...
£28.95
Ex Tax:
Gavita LED Interconnect 3m Cable (GAV-RJIC3)
Cable to connect E-series LED adapters together...
£7.95
Ex Tax:
Bluelab Guardian Monitor Connect Inline
Monitor your key parameters 24/7 - Save time and effort with continuous monitoring With the Bluelab Guardian Monitor Connect Inline, you will be able to continuously monitor pH, EC and temperature in your nutrient feed line. There’s no need for manual spot checks; instead, you’ll ensure that your nutrient delivery system is working optimally at all times. That’s because when you track the three fundamental parameters of nutrient uptake, you’re able t..
£523.95
Ex Tax:
Bluelab Connect Stick 2
Remote monitoring for complete peace of mind Enjoy complete peace of mind with remote monitoring - Stay connected whenever you leave your crops With the Bluelab Connect Stick 2, you’ll be able to improve crop performance and reduce errors. What’s more, through the power of data and remote monitoring, you can stay connected to your crops - even when you’re on holiday. To connect, simply download our free Connect software. Once installed on y..
£123.95
Ex Tax:
Bluelab Connect Range Extender 2
Boost the wireless range between Bluelab Connect products Improve range between Bluelab Connect devices - Send your Connect data further If you’re currently working within a large growing facility or environment, you can use the Bluelab Connect Range Extender 2 to boost your range, sending your Bluelab Connect wireless data even further. All you need to do is plug the Bluelab Connect Range Extender 2 into a power supply between Bluelab Connect devices a..
£184.95
Ex Tax:
NIDO Connector Valve
Quick connection valva for the NIDO Hydroponics Automations system...
£25.95
Ex Tax:
Ultra Heavy Duty Plant Support Stakes + Connectors - 0.75m x 16mm
Our new HD heavy duty plant support stakes are perfect for garden and allotment use. At 16mm, these ultra thick plastic coated steel plant stakes are ideal for supporting plants and flowers, including roses and peonies, as well as climbing fruit and veg such as peas and runner beans. You can also use them with our range of plant stake connectors to create fruit cages, wigwams, pea frames and other garden structures. UV protected and rust proof, these plant..
£28.95
Ex Tax:Ultra Heavy Duty Plant Support Stakes + Connectors - 0.75m x 16mm
Our new HD heavy duty plant support stakes are perfect for garden and allotment use. At 16mm, these ultra thick plastic coated steel plant stakes are ideal for supporting plants and flowers, including roses and peonies, as well as climbing fruit and veg such as peas and runner beans. You can also use them with our range of plant stake connectors to create fruit cages, wigwams, pea frames and other garden structures. UV protected and rust proof, these plant..
£28.95
Ex Tax:
TECOnnect Wi-Fi Device - HY500/HY1000/HY2000
The TECOnnect Wi-Fi Device is compatible with the HY500, HY1000 & HY2000 TECO Chillers. The added benefit of Wi-Fi connectivity with an optional App means easy connectivity and effortless monitoring of your chillers. It allows growers to change the temperature of their nutrients remotely, monitoring the conditions and reacting to climatic conditions. For example, if the weather is warmer over a weekend you could remotely drop the nutrient temperature ..
£134.95
Ex Tax:
Trolmaster (ECS-5) RJ12 to PushLock Converter Cable - Hydro-X
The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable. Contains 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to PushLock Waterproof Connector converter cable 1 x T-shaped Splitter Please note: Lead time 1-2 weeks...
£52.95
Ex Tax:
HR-15 & HR-50 Fitting Kit
Fitting kit for the HR-15 and HR-50 humidifiers. Also fits other systems, contact us for details...
£16.95
Ex Tax:
Air Comfort Wireless Connection Full Kit
Full kit includes: AirComfort SoilQuality Probe iBebot Hub Monitors: Humidity Temperature Soil Moisture Soil Nutrient Data Logging ..
£176.95
Ex Tax:
-12ft-RJ12-to-4-pin-IP65-Connector-Cable-228x228.jpg "Trolmaster (ECS-9) 12ft RJ12 to 4-pin IP65 Connector Cable")
Trolmaster (ECS-9) 12ft RJ12 to 4-pin IP65 Connector Cable
The ECS-9 RJ12 to 4pin connector cable is simply a 12 ft cable to use with Lighting Control Adaptor T (LMA-T) and ThinkGrow LEDs with Threaded Waterproof Connectors for interconnecting...
£36.95
Ex Tax:
SANlight FLEX 2 Pin Waterproof Connection Cable
SANlight FLEX 2 Pin Waterproof Connection Cable..
£4.95
Ex Tax:
Large Mixer Tap Connector
Large Mixer Tap Connector conviniently makes watering your garden so much easier. This tap connector is ideal for us with large kitchen taps, and it connects directly to the hose pipe to make light work of watering your garden. The kingfisher large garden tap connector is a part of kingfisher value gardening choice, which provides innovative and practical products at a great price. Robust construction – long lasting Fits most large kitchen taps – highl..
£10.95
Ex Tax:
Blumat T-Piece 8-8-8mm Connector
For use with Blumat 8mm Supply Tube, these high quality fittings allow for a tidy installation of your Blumat irrigation system...
£1.95
Ex Tax:
Blumat Tank Connector
Used to create a watertight connection for 8mm tuning on a tank, bucket, or any water vessel! Comes with a rubber washer and nut, simply drill an 11mm hole in the water vessel and tighten by hand...
£2.95
Ex Tax:
GAS Controller Replacement Probe – Standard Length with Connector
Please contact our technical department if you need help to determine which type of replacement probe you need...
£33.95
Ex Tax:GAS Controller Replacement Probe – Long Length with Connector
Please contact our technical department if you need help to determine which type of replacement probe you need...
£51.95
Ex Tax:
Migro Aray 2 & 4 Connector Bracket
A connection bracket to join multiple ARAY 2 and ARAY 4 models together. You can upgrade your ARAY 2 to an ARAY 4 or connect multiple ARAY 4s together. Complete with 4 x stainless steel Hex Screws for fitting. 270mm or 10.5" long...
£16.95
Ex Tax:
Migro Aray 3 Connector Bracket
A connection bracket to join multiple ARAY 3 models together. Complete with 4 x stainless steel Hex Screws for fitting. 205mm or 8" long..
£16.95
Ex Tax:
Growlink The All-In-One Connect Controller
Elevate your cultivation process with the Growlink Connect All-In-One Room Controller with built-in I/O. This single, unified device provides unparalleled control, merging climate and irrigation management with real-time monitoring, ensuring an optimal conditions for your crops.Connect offers a diverse range of advanced features to cater to the needs of growers, regardless of their scale. In addition to the standard control functions, the Connect is capabl..
£3,664.95
Ex Tax:
Hard/Soft Wall Connecting Pipe for Humidifiers
Hard/Soft Wall Connecting Pipe for Humidifiers.Sold per metre...
£0.49
Ex Tax:
Dimlux T Connectors for Alpha Optics 98 Reflector
The DimLux T-piece is designed for linking multiple Alpha Optics reflector 98's simultaneously...
£19.95
Ex Tax:
AutoPot (16mm to 4 x 4mm Quad) X Cross Connector 4 Outlet
AutoPot X cross Connector (16mm to 4 x 4mm)...
£1.49
Ex Tax:
Plug Connector for PE Pipe Coupling - Stop 20x20mm
Plug Connector for PE Pipe Coupling - STOP 20x20mm...
£0.59
Ex Tax:Plug Connector for PE Pipe Coupling - Stop 25x25mm
Plug Connector for PE Pipe Coupling - STOP 25x25mm...
£0.89
Ex Tax:
Plug Connector for PE Pipe Coupling - Valve 16x16mm
Plug Connector for PE Pipe Coupling - VALVE 16x16mm...
£2.49
Ex Tax:Plug Connector for PE Pipe Coupling - Valve 20x20mm
Plug Connector for PE Pipe Coupling - VALVE 20x20mm...
£2.49
Ex Tax:Plug Connector for PE Pipe Coupling - Valve 25x25mm
Plug Connector for PE Pipe Coupling - VALVE 25x25mm...
£2.49
Ex Tax:
Plug Connector for PE Pipe Coupling - 1/2" Valve Male 20mm
Plug Connector for PE Pipe Coupling - 1/2" Valve Male 20mm...
£2.49
Ex Tax:Plug Connector for PE Pipe Coupling - 1/2" Valve Male 16mm
Plug Connector for PE Pipe Coupling - 1/2" Valve Male 16mm...
£2.49
Ex Tax:Plug Connector for PE Pipe Coupling - 3/4" Valve Male 20mm
Plug Connector for PE Pipe Coupling - 3/4" Valve Male 20mm...
£2.49
Ex Tax:Plug Connector for PE Pipe Coupling - 3/4" Valve Male 25mm
Plug Connector for PE Pipe Coupling - 3/4" Valve Male 25mm...
£2.49
Ex Tax:
Plug Connector for PE Pipe Coupling - 3/4" Female Stop
Plug Connector for PE Pipe Coupling - 3/4" Female Stop...
£0.95
Ex Tax:Plug Connector for PE Pipe Coupling - 1" Female Stop
Plug Connector for PE Pipe Coupling - 1" Female Stop...
£0.95
Ex Tax:Plug Connector for PE Pipe Coupling - 1/2" Female Stop
Plug Connector for PE Pipe Coupling - 1/2" Female Stop...
£0.95
Ex Tax:
MaxiLED Propagation LED T Connector and Link Cable
MaxiLED Propagation LED T Connector and Link Cable...
£5.95
Ex Tax:
Pulse 3-way T Connector
Contacts -- 5 Pins on each side Gender -- One male and two females IP Rating -- IP 67 in locked condition UL Certified..
£24.95
Ex Tax:
Pulse 6-way T Connector
Gender -- One Male and Five Females Contacts -- 5 Pins IP Rating -- IP 67 UL Certified..
£48.95
Ex Tax:
Pulse TEROS 12 Retrofit Kit TRS 3.5mm Connector
Already own a Hub-ready sensor? Use a retrofit kit to get it connected to your Hub. Includes: 1x Hub Retrofit Cable or Connector 2x Hub ID & Integration Labels 1x Mini Screwdriver (DIY only) 1x Wiring Diagram (DIY only) NOTE: DIY kits require minor wiring that uses the included screwdriver (estimated 5-10 minute install)...
£86.95
Ex Tax:
Pulse TEROS 12 Retrofit Kit M8 4-pin Connector
Already own a Hub-ready sensor? Use a retrofit kit to get it connected to your Hub. Includes: 1x Hub Retrofit Cable or Connector 2x Hub ID & Integration Labels 1x Mini Screwdriver (DIY only) 1x Wiring Diagram (DIY only) NOTE: DIY kits require minor wiring that uses the included screwdriver (estimated 5-10 minute install). Select the connector type that matches your sensor (bare wires, 4-pin or 3.5mm)...
£86.95
Ex Tax:
