Search
Search
Product Compare (0)
Bluelab Conductivity Probe Care Kit
The instrument is only as accurate as the probe is clean. Probe cleaning is one of the most important parts of owning or operating any Bluelab meter, monitor or controller. If the probe is contaminated or dirty, it affects the accuracy of the reading displayed. The Bluelab Truncheon® Meter and Bluelab Conductivity Probes read low when the probe is contaminated. The probe surface is where the instrument takes the reading of the solution. The in..
£13.95
Ex Tax:
Conductivity Standard
Solutions of a known electrical conductivity (EC), used to check and calibrate EC meters. This should be a regular procedure to ensure best results from the meter. Available EC standard solutions: 1.413 mS/cm and 2.76 mS/cm..
£2.95
Ex Tax:
MW802 pH & Conductivity Combination Meter
3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! The MW802, with a conductivity range that goes up to 6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production. Soil and well water pH that is too acidic or alkaline can have an adverse effect on plant nutrient and water uptake and directly effect the efficiency of fertilizer, herbicides and pesticides. Soil Cond..
£363.95
Ex Tax:
Conductivity Economical Pocket Tester CD611
Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions. All EC/TDS testers compensate for the temperature variance automatically. The CD611 is a Conductivity tester specifically designed for water analysis. The calibration procedure is very simple and fast. Thi..
£61.95
Ex Tax:
Bluelab Pro Controller Conductivity Probe
Replacement conductivity probe for the Bluelab Pro Controller Connect. Easy to clean Low maintenance Fully submersible probe 2-metre/6.56-foot standard cable..
£42.95
Ex Tax:
Bluelab Probe Care Kit - pH & Conductivity
A complete maintenance kit for Bluelab Conductivity and pH probes. pH and Conductivity Probe care instructions 20 ml single-use Bluelab Solution Sachets, 2 each of pH7.0, pH 4.0, KCl, and 2.77 EC Conductivity Standard Solution 3x plastic cups Bluelab pH Probe Cleaning Solution Bluelab Conductivity Probe Cleaning Solution Bluelab Toothbrush (pH probe cleaning instrument) Bluelab Chamois (conductivity probe cleaning instrument)..
£21.95
Ex Tax:
Hanna PRIMO4 Pocket Conductivity Tester (0 to 10.00mS/cm)
This pocket tester is fitted with a conductivity probe on a 1m long cable and has a measurement range of 0.00 to 10.00mS with 0.01mS/cm resolution. Primo 4 is a rugged and reliable tester for quick and accurate conductivity testing. Perfect for use in hydroponics, drinking water and aquariums. The PRIMO4 is ideally suited to the rigorous demands of water quality professionals who will appreciate the practicality of the clear, easy to read LCD for demonst..
£78.95
Ex Tax:
Hanna Pocket Conductivity Tester (0 to 2000MS/cm) HI-98303
This pocket sized conductivity tester has a range of 0 to 1999uS/cm with 1uS/cm resolution. The HI-98303 is a rugged and reliable pocket-sized tester that offers quick and accurate readings of conductivity and ideal for testing in the field and the laboratory. This tester features an amperometric graphite electrode that provides better repeatability in measurements since it does not oxidise. The HI-98303's non-oxidising graphite pins are able to provide ..
£104.95
Ex Tax:
Hanna Direct Soil Conductivity Kit HI-993310
The HI-993310 has been designed to address the need for fast and accurate conductivity measurements in soil and liquids. It is supplied with two probes: HI-76305 with stainless steel, conical tip for direct soil measurement and HI-76304 for fertiliser enriched solutions. The HI-993310 measures soil conductivity in EC (mS/cm) as well as salt activity (g/L). The different scales can be selected through two keys on the front panel and two LEDs indicate which..
£1,013.95
Ex Tax:
Hanna Multi-range Conductivity Meter HI-8633
This portable meter is supplied complete with a rugged conductivity probe and is programmed with 4 ranges of conductivity to meet all applications. Temperature compensation is manually set via a rotary knob on the front of the meter. The HI-8633 is a conductivity meter that has been designed for use in areas of production and quality control. This meter utilises four ring potentiometric probes that offer greater versatility over typical amperometric desi..
£735.95
Ex Tax:
GroLab Conductivity Probe
Probe for measuring EC of a liquid solution. This conductivity probe comes with an electrode capable of constantly acquires EC values from your solution. With a 2 meters cable and an BNC connector easily connect this probe with TankBot and start getting all the information that you may need from your solution. Specifications: Operating Voltage: 5 VDC Sensor Type: Electrode Cell Constant: 1.0 ± 2 Measuring Range: 0 to 19990 μS/cm Accuracy:..
£93.95
Ex Tax:
Growlink Conductivity Sensor Replacement
Used for Laboratory and Light Industrial Applications: Cells are made from graphite to provide good performance for the value. Choose from 2 cell constants: 0.1/cm and 1.0/cm. Process versions: with 10 ft (3m) cable, PT1000 temperature element, and tinned lead (for use with Growlink Batch Tank Monitors)..
£363.95
Ex Tax:
Bluelab pH and Conductivity Starter Pack
Everything you need to measure pH, conductivity and temperature Handheld design is compact and convenient The backlit display is bright and easy to read Designed for nutrient reservoirs, the Bluelab pens are waterproof and float in any solution Bluelab pH Pen Measure pH and temperature Double-junction probe and simple, 2-point pH calibration with 30-day reminder Bluelab Conductivity Pen Measure conductivity in EC, ppm 500..
£206.95
Ex Tax:
Bluelab Probe Care Kit – pH and Conductivity
Everything you need to clean, calibrate and maintain your pH and conductivity probes Your Bluelab Probe Care Kit – pH and Conductivity contains: Probe care instructions 18 ml single-use Bluelab Solution Sachets - two each of: pH 7.0, pH 4.0, KCl and 2.77 EC standard solution Three plastic cups Bluelab pH Probe Cleaner Bluelab Conductivity Probe Cleaner Toothbru..
£31.95
Ex Tax:
Bluelab Probe Care Kit - Conductivity
Everything you need to clean and maintain your conductivity probes Your Bluelab Probe Care Kit – Conductivity contains: Probe care instructions Two 18 ml single-use sachets of Bluelab 2.77 EC Conductivity Standard Solution One plastic cup Bluelab Conductivity Probe Cleaner Chamois for cleaning your conductivity probe Packaging may vary Caring for your Bluelab con..
£17.95
Ex Tax:
Bluelab 2.77 EC Conductivity Standard Solution
Conductivity standard solutions - a must in every grower's toolbox. Improve EC/PPM accuracy with regular cleaning...
£13.95
Ex Tax:
