The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECREASE humidity indepen..
The Mini Grower is a complete controller for indoor growing systems with an artificial lighting. It defines the lighting interval for 9X600W lights, defines the watering interval by the GSE Water timer and regulates the climate by the GSE Temperature and negative pressure fan controller. All connections are wired to plugs with flap lid and can be controlled over a main switch integrate safety breaker 3x16A.
- Case: WxHxD = 200x430x95mm
- Connection 3 pole..
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a standard daytime recycling t..
The Superpro DDAC-1 receives information from the sensors and activates external fans, air conditioners, dehumidifiers, heaters, and CO2 equipment as needed to maintain optimum levels for indoor agriculture. Until now, this simple idea was easier said than done.
A 15-amp / 120 or 10-amp / 240 vot circuit breaker and heavy-duty internal construction ensures that the unit will operate for years without fail. We only use high-quality UL / CE listed component..
The Maxi Controller can adjust the output according to the ambient temperature: the lamps are dimmed automatically when the temperature exceeds a maximum pre-defined level.
Using the DimLux with a Maxi Controller enables you to plug the DimLux directly into a wall socket without needing an intervening relay, time delay unit or time switch – which saves you costs.
A DimLux controlled by a Maxi Controller is the only (digital) ballast that does not need to..
The SMSCOM SwitchBox 2L All-in-One is a complete control unit for lights, heater and ventilators. The SwitchBox 2L All-in-One allows you to control 2 lights of a maximum of 600w each. The added Double Digital Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the SwitchBox 2L All-in-One is analogue but the control is digital which offers many advantages over controllers without software control. The..
The SMSCOM SwitchBox 4L All-in-One is a complete control unit for lights, heater and ventilators. The SwitchBox 4L All-in-One allows you to control 4 lights of a maximum of 600w each. The added Double Digital Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the SwitchBox 4L All-in-One is analogue but the control is digital which offers many advantages over controllers without software control. The..
The SMSCOM Hybrid SwitchBox 4L All-in-One is a complete control unit for lights, heater and ventilators. The Hybrid SwitchBox 4L All-in-One allows you to control 4 lights of a maximum of 600w each. The added Hybrid Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the Hybrid SwitchBox 4L All-in-One is analogue but the control is digital which offers many advantages over controllers without software..
The Davin Mini-Grower is a complete switchboard that includes a temperature controller, and a analog water seconds timer. The DAVIN mini-grower lets you easily monitor plants in a grow tent without the need for any other equipment.
Specifications
Dimensions: 500x228x150mm.
Required voltage: 230 Vac/50Hz.
Max. output: 3×16A
Isolation Level: IP-44...
The DAVIN Mini-Grower is a complete switchboard that includes a temperature controller, and a analog water seconds timer. The DAVIN mini-grower lets you easily monitor plants in a grow tent without the need for any other equipment.
Specifications
Dimensions: 500x228x150mm.
Required voltage: 380 Vac/50Hz.
Max. output: 25A
Isolation Level: IP-44...
Was £350 - Now £300
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECR..
Was £449.95 - Now £380
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a stan..
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECREASE humidity indepen..
The Mini Grower is a complete controller for indoor growing systems with an artificial lighting. It defines the lighting interval for 9X600W lights, defines the watering interval by the GSE Water timer and regulates the climate by the GSE Temperature and negative pressure fan controller. All connections are wired to plugs with flap lid and can be controlled over a main switch integrate safety breaker 3x16A.
- Case: WxHxD = 200x430x95mm
- Connection 3 pole..
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a standard daytime recycling t..
The Superpro DDAC-1 receives information from the sensors and activates external fans, air conditioners, dehumidifiers, heaters, and CO2 equipment as needed to maintain optimum levels for indoor agriculture. Until now, this simple idea was easier said than done.
A 15-amp / 120 or 10-amp / 240 vot circuit breaker and heavy-duty internal construction ensures that the unit will operate for years without fail. We only use high-quality UL / CE listed component..
The Maxi Controller can adjust the output according to the ambient temperature: the lamps are dimmed automatically when the temperature exceeds a maximum pre-defined level.
Using the DimLux with a Maxi Controller enables you to plug the DimLux directly into a wall socket without needing an intervening relay, time delay unit or time switch – which saves you costs.
A DimLux controlled by a Maxi Controller is the only (digital) ballast that does not need to..
The SMSCOM SwitchBox 2L All-in-One is a complete control unit for lights, heater and ventilators. The SwitchBox 2L All-in-One allows you to control 2 lights of a maximum of 600w each. The added Double Digital Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the SwitchBox 2L All-in-One is analogue but the control is digital which offers many advantages over controllers without software control. The..
The SMSCOM SwitchBox 4L All-in-One is a complete control unit for lights, heater and ventilators. The SwitchBox 4L All-in-One allows you to control 4 lights of a maximum of 600w each. The added Double Digital Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the SwitchBox 4L All-in-One is analogue but the control is digital which offers many advantages over controllers without software control. The..
The SMSCOM Hybrid SwitchBox 4L All-in-One is a complete control unit for lights, heater and ventilators. The Hybrid SwitchBox 4L All-in-One allows you to control 4 lights of a maximum of 600w each. The added Hybrid Fan Controller makes it possible to control two ventilators of a maximum of 1200w combined.
The operation of the Hybrid SwitchBox 4L All-in-One is analogue but the control is digital which offers many advantages over controllers without software..
The Davin Mini-Grower is a complete switchboard that includes a temperature controller, and a analog water seconds timer. The DAVIN mini-grower lets you easily monitor plants in a grow tent without the need for any other equipment.
Specifications
Dimensions: 500x228x150mm.
Required voltage: 230 Vac/50Hz.
Max. output: 3×16A
Isolation Level: IP-44...
The DAVIN Mini-Grower is a complete switchboard that includes a temperature controller, and a analog water seconds timer. The DAVIN mini-grower lets you easily monitor plants in a grow tent without the need for any other equipment.
Specifications
Dimensions: 500x228x150mm.
Required voltage: 380 Vac/50Hz.
Max. output: 25A
Isolation Level: IP-44...
Was £350 - Now £300
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECR..
Was £449.95 - Now £380
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a stan..