Search
Search
Product Compare (0)
Tropf Blumat Sensors
Fully automated watering While many irrigation systems rely on timers and the guesswork of growers to determine when to water and how much, Tropf Blumat sensors do this automatically, maintaining a tight moisture range without allowing a wet-dry cycle. This is hugely beneficial not only to the health of your plants but also to the microbial life in the soil. Blumat Sensors are perfect for organics growers using living soil. Automatically waters the soi..
£5.95
Ex Tax:
Tropf Blumat Protection Cap
In some situations, these protection caps for the Tropf-Blumat sensors are especially useful. They prevent accidental adjustments from occurring when doing general maintenance, such as lower leaf and stem pruning, or top-dressing. Please note – once on they are quite tricky to remove without a small screwdriver...
£0.95
Ex Tax:
Blumat Distribution Drippers
These Distribution Drippers extend the watering capacity of the Trop-Blumat sensors on their own, while also creating an even distribution of water over the soil surface. Why distribution drippers? One Tropf-Blumat alone can water a circular area around 20-25cm in diameter. When growing in larger pots, the best way to extend the surface area a Tropf-Blumat sensor can water is using these distribution drippers. One Tropf-Blumat can be connected up to 5 of..
£0.95
Ex Tax:
Blumat T-Piece 8-8-8mm Connector
For use with Blumat 8mm Supply Tube, these high quality fittings allow for a tidy installation of your Blumat irrigation system...
£1.95
Ex Tax:
Blumat 8mm Elbow
For use with Blumat 8mm Supply Tube, these high quality fittings allow for a tidy installation of your Blumat irrigation system...
£0.95
Ex Tax:
Blumat T-Piece 3-3-3mm
For use with Blumat 3mm Drip, these high-quality fittings enable connections to be made between 3mm – 3mm pipe...
£1.95
Ex Tax:
Blumat 4mm > 3mm Reducer
For use with Blumat 3mm Drip, these high-quality fittings enable connections to be made between 3mm – 4mm pipe...
£0.95
Ex Tax:
Blumat T-Piece 8-3-8mm
For use with Blumat 3mm Drip, these high-quality fittings enable connections to be made between 3mm – 8mm pipe...
£1.95
Ex Tax:
Blumat End-Elbow 8-3mm
For use with Blumat 3mm Drip, these high-quality fittings enable connections to be made between 3mm – 8mm pipe...
£1.95
Ex Tax:
Blumat 8mm Supply Tube
Essential to all Blumat systems, 8mm tubing is used for supplying water from the water source to the Tropf-Blumat Sensors...
£1.95
Ex Tax:
Blumat 3mm Drip Tube
Essential to all Blumat systems, 3mm tubing delivers water from the sensors to the soil...
£1.95
Ex Tax:
Blumat Pressure Reducers
Blumat systems need adequate pressure to operate effectively. Too much pressure can cause problems when running from a garden tap, or from a pump system, which is where these high-quality pressure reducers are used. With ¾” thread on one side and 8mm outlet and locking nut on the other. 0.1 bar can work on small systems, but higher is better. If you can maintain 0.5 bar, most moderate sized systems will work very well. 1.3 bar is the highest you can run..
£43.95
Ex Tax:
Blumat Tank Connector
Used to create a watertight connection for 8mm tuning on a tank, bucket, or any water vessel! Comes with a rubber washer and nut, simply drill an 11mm hole in the water vessel and tighten by hand...
£2.95
Ex Tax:
Blumat Shut-Off Valve
High quality 8mm inline valve with locking nuts on either side. Used after the reservoir to turn off the water supply to your plants, or used at the end of the 8mm line to bleed any air out of the system or to periodically flush the lines to prevent any build up. Recommended for all Tropf Blumat Irrigation setups...
£5.95
Ex Tax:
Blumat Hole Corer
These Blumat Hole Corers are ideal when making a hole in compacted outdoor soil. They can also be used for taking soil samples from deep pots or beds...
£11.95
Ex Tax:
Blumat Classic
Blumat Classic is the tried and tested solution for automatic watering of all kinds of indoor plants. Super easy to use, ideal when you’re on holiday or all year round. Let your plants look after themselves with the Blumat Classic. How it Works With Blumat Classic, indoor plants precisely get the amount of water they need, regardless of whether it’s sunny or shady. The water is drawn from a container of your choice through a thin tube and released direct..
£5.95
Ex Tax:
Blumat Easy
Blumat Easy is a handy plant watering device, ideal when you want to take a short holiday. Simply attach to any standard plastic bottle and allow the clay cone to slowly deliver water to the plant. How it Works The Blumat Easy is a bottle adapter that requires no power, electricity, batteries or any other accessories. This fully automated plant waterer delivers a constant, steady supply of water over time. A simple irrigation system, the Blumat Easy is ..
£15.95
Ex Tax:
Blumat Digital
Perfect Control Over Watering It is not always easy to estimate the moisture content of large pots simply by looking at the soil or sticking your finger in. This Blumat Digital sensor takes the guesswork out of watering and setting up irrigation systems. You'll know if your plants need water and how much to water them. Once you start using the Blumat Digital, you'll wonder how you managed without it. Accurately dial in your irrigation system or..
£65.95
Ex Tax:
Blumat Pump Kits 2L
Designed for use with Blumat and Blusoak irrigation systems, these pump kits enable you to supply water to the Tropf Blumat sensors without having to rely on a gravity driven header tank. How it Works Utilising the market leading Shuflo diaphragm pumps, this pump kit enables you to supply water at constant pressure to your Tropf Blumat Sensors. Combining an inline pump with a pressure vessel, this complete kit provides everything you need to drive your B..
£409.95
Ex Tax:
Blumat Pump Kit 8L
Designed for use with Blumat and Blusoak irrigation systems, these pump kits enable you to supply water to the Tropf Blumat sensors without having to rely on a gravity driven header tank. How it Works Utilising the market leading Shuflo diaphragm pumps, this pump kit enables you to supply water at constant pressure to your Tropf Blumat Sensors. Combining an inline pump with a pressure vessel, this complete kit provides everything you need to drive your B..
£438.95
Ex Tax:
Blumat Pressure Vessel 2L
Pressure Vessels are used with pump systems to provide a constant pressure. They allow time for the pump to switch off while still maintaining the desired pressure in the irrigation lines. How it Works Pressure Vessels have an internal bladder. This is filled with air to the desired pressure using a standard bicycle pump (with pressure gauge). This bladder then exerts pressure, so as the unit is filled with water from the pump, the pressure of the bladde..
£65.95
Ex Tax:
Blumat Pressure Vessel 8L
Pressure Vessels are used with pump systems to provide a constant pressure. They allow time for the pump to switch off while still maintaining the desired pressure in the irrigation lines. How it Works Pressure Vessels have an internal bladder. This is filled with air to the desired pressure using a standard bicycle pump (with pressure gauge). This bladder then exerts pressure, so as the unit is filled with water from the pump, the pressure of the bladde..
£87.95
Ex Tax:
Blusoak Kits
These handy kit packs contain the Blumat and Blusoak parts you need to for automated watering of beds. Ideal for large gardens, simply buy the amount of kit packs you need for your garden or grow room. At the heart of these Blusoak Kits are the Tropf-Blumat sensors, these constantly monitor and replenish the moisture in your soil as and when the plants need it. Blumat sensors do this automatically, maintaining a tight moisture range without allowing a wet..
£49.95
Ex Tax:
Irrometer MLT 120
This precision mini-tensiometer is used by commercial growers and research institutes to accurately measure water tension in potting soil. Stainless Steel Gauge — Accuracy and long life are ensured by a stainless-steel rustproof body and membrane vent for better temperature and elevation related compensation. “Quick-Flo” Ceramic Tip — is designed for low tension applications where quick response to soil moisture variations in potting soil / growing med..
£33.95
Ex Tax:
Irrometer LT 300
This precision tensiometer is used by commercial growers and research institutes to accurately measure water tension in potting soil. Stainless Steel Gauge — Accuracy and long life are ensured by a stainless-steel rustproof body and membrane vent for better temperature and elevation related compensation. Quick-Flo” Ceramic Tip — is designed for low tension applications where quick response to soil moisture variations in potting soil / growing media is ..
£132.95
Ex Tax:
