The Aqua-X Irrigation Controller is the main controller of the Aqua-X irrigation control system. With the combination of pH Sensor and EC/Temp Sensor, Aqua-X can monitor the pH, EC and Temp levels of the nutrient. With the use of 110V control board and 24V control board, the system could manage up to 30 individual outputs for multiple watering schedules.
With the innovative water detectors, the system could monitor each watering schedules with alerts for ..
24V Control Board is specially designed for Aqua-X Irrigation Control System. It features 6 individually-controlled 24V outputs for the control of solenoid valves in the Aqua-X Control System.
Features:
LED Power Indicator
Addressing Button
6 Individually-Controlled 24V Outputs
Individual LED Indicator for Each Output
Double RJ12 Cable Sockets for Daisy Chain Connectivity..
AMP-2 Sensor Board is specially designed for Aqua-X Irrigation Control System. With a male-to-male signal cable, this unit acts as a bridge between the sensors (pH Sensor & EC/Temp Sensor) and the Aqua-X Controller. The pH level, EC level and water temperature will be shown on the LCD screen of the Aqua-X master controller.
Features:
Simpe-to-Use DIN Type Bracket for Easy Installation
BNC Terminal (left) allows Direct Connection to pH Sensor
Mini..
PCT-1 Reservoir EC/Temp Sensor is specially designed for Aqua-X Irrigation Control System. The EC/Temp electrode probe has a single cylinder that allows direct connection to the terminal of the AMP-2 Sensor Board. It is accurate and reliable that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the EC level and water temperature.
Features:
Suitable for wide range of applications: Hydrop..
PCT-2 Inline EC/Temp Sensor is specially designed for Aqua-X Irrigation Control System. The EC/Temp electrode probe has a single cylinder that allows direct connection to the input terminal of the AMP-2 Sensor Board. It is accurate and heavy duty that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the EC level and water temperature.
Features:
Suitable for wide range of applications: H..
PPH-2 Inline pH Sensor is specially designed for Aqua-X Irrigation Control System. The pH electrode probe has a single cylinder that allows direct connection to the terminal of the AMP-2 Sensor Board. It is accurate and heavy duty that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the pH level of your water.
Features:
Suitable for wide range of applications: Hydroponics, Aquariums, L..
For Hydro-X Info:
The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.
For Aqua-X Info:
The TrolMaster DSP-1 program device module (timer module) works like a multi-function irrigation timer. The timers for the DSP-1 can be set to..
Water Detector (WD-1) is specially designed for the water detection in the Aqua-X Irrigation Control System. It is a leaking sensor when it’s connected to the system. It also could be assigned to any controlled output in the system to monitor the watering schedules.
Features:
LCD Display, Easy Operation
Addressing Button
Please note: Lead time 1-2 weeks...
Touch Spot Set (TSS-1) is specially designed for the WD-1 water detector in the Aqua-X Irrigation Control System.
Features:
Seamless Connection with Water Detector
Plug & Play..
Touch Spot Extension Cable (TSS-2) is specially designed for the WD-1 water detector in the Aqua-X Irrigation Control System.
Features:
Seamless Connection with Water Detector
Plug & Play..
Suitable for wide range of applications: Hydroponics, Aquariums, Laboratory etc.
3.6-meter long cable for flexible placement.
BNC terminal allows direct connection to AMP-2 Sensor Board...
The WCS-1 water content sensor allows the user to monitor the % of water / nutrients within the growing medium.
The moisture level / water content is displayed in real-time on the WCS module itself, the Aqua-x and the APP. That data is displayed on a graph (through the APP) and helps the user visualize the dry-down time, and to make adjustments to their irrigation timers / irrigation cycles. Up to 8 WCS-1 can be connected to a single Aqua-x. When multiple..
The ECS-4 extension cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between AMP-2 sensor board and the main controller.
Features:
Seamless Connection
Plug & Play..
The NFS-2 controller from TrolMaster is one of the most advanced irrigation controllers available today. The NFS-2 is a multi-functional controller which can control multiple irrigation solenoids and pumps. The NFS-2 can also monitor multiple water sensors that can measure pH, EC / PPM, temperature and water content sensor. There is also a new optional DFW-1 flow-meter that serves multiple functions. Each of the solenoids and pumps can be "linked" to work ..
The AMP-3 Sensor Board can be used as a bridge between the sensors (pH Sensor & EC/Temp Sensor) and the Aqua-X Pro Controller. It is specially designed for the Aqua-X Pro system. It can be connected to the main controller with a standard RJ12 cable.
Multiple units can be connected into one system for multiple monitoring applications.
The pH level, EC level and water temperature will be displayed on its LCD screen and the Aqua-X Pro master controller ..
The OM-8 dry contact board allows the main controller to control up to 8 individual outputs on it. It is specially designed for the Hydro-X Pro and Aqua-X Pro system. It has 8 individual electrical contacts, and allows up to 12 Amp current through each contact.
*The OM-8 should be mounted inside an electric control cabinet, and connected to a power supply between 100-240 VAC.
*When used with the Aqua-X Pro system, OM-8 can activate pumps/solenoids at a h..
The DFM-1 is a 1" digital inline flow meter provides accurate measurements of water or a nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system. When it’s used with the Aqua-X Pro, users can set the irrigation schedule to be controlled “By volume”, and the DFM-1 will measure and allow the desired and precise amount of nutrient solution to be used. The DFM-1 sensor can also be used for future functions and may inc..
The Aqua-X Irrigation Controller is the main controller of the Aqua-X irrigation control system. With the combination of pH Sensor and EC/Temp Sensor, Aqua-X can monitor the pH, EC and Temp levels of the nutrient. With the use of 110V control board and 24V control board, the system could manage up to 30 individual outputs for multiple watering schedules.
With the innovative water detectors, the system could monitor each watering schedules with alerts for ..
24V Control Board is specially designed for Aqua-X Irrigation Control System. It features 6 individually-controlled 24V outputs for the control of solenoid valves in the Aqua-X Control System.
Features:
LED Power Indicator
Addressing Button
6 Individually-Controlled 24V Outputs
Individual LED Indicator for Each Output
Double RJ12 Cable Sockets for Daisy Chain Connectivity..
AMP-2 Sensor Board is specially designed for Aqua-X Irrigation Control System. With a male-to-male signal cable, this unit acts as a bridge between the sensors (pH Sensor & EC/Temp Sensor) and the Aqua-X Controller. The pH level, EC level and water temperature will be shown on the LCD screen of the Aqua-X master controller.
Features:
Simpe-to-Use DIN Type Bracket for Easy Installation
BNC Terminal (left) allows Direct Connection to pH Sensor
Mini..
PCT-1 Reservoir EC/Temp Sensor is specially designed for Aqua-X Irrigation Control System. The EC/Temp electrode probe has a single cylinder that allows direct connection to the terminal of the AMP-2 Sensor Board. It is accurate and reliable that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the EC level and water temperature.
Features:
Suitable for wide range of applications: Hydrop..
PCT-2 Inline EC/Temp Sensor is specially designed for Aqua-X Irrigation Control System. The EC/Temp electrode probe has a single cylinder that allows direct connection to the input terminal of the AMP-2 Sensor Board. It is accurate and heavy duty that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the EC level and water temperature.
Features:
Suitable for wide range of applications: H..
PPH-2 Inline pH Sensor is specially designed for Aqua-X Irrigation Control System. The pH electrode probe has a single cylinder that allows direct connection to the terminal of the AMP-2 Sensor Board. It is accurate and heavy duty that can gives almost instantaneous readings shown on the LCD screen of Aqua-X master controller, helping you to monitor the pH level of your water.
Features:
Suitable for wide range of applications: Hydroponics, Aquariums, L..
For Hydro-X Info:
The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.
For Aqua-X Info:
The TrolMaster DSP-1 program device module (timer module) works like a multi-function irrigation timer. The timers for the DSP-1 can be set to..
Water Detector (WD-1) is specially designed for the water detection in the Aqua-X Irrigation Control System. It is a leaking sensor when it’s connected to the system. It also could be assigned to any controlled output in the system to monitor the watering schedules.
Features:
LCD Display, Easy Operation
Addressing Button
Please note: Lead time 1-2 weeks...
Touch Spot Set (TSS-1) is specially designed for the WD-1 water detector in the Aqua-X Irrigation Control System.
Features:
Seamless Connection with Water Detector
Plug & Play..
Touch Spot Extension Cable (TSS-2) is specially designed for the WD-1 water detector in the Aqua-X Irrigation Control System.
Features:
Seamless Connection with Water Detector
Plug & Play..
Suitable for wide range of applications: Hydroponics, Aquariums, Laboratory etc.
3.6-meter long cable for flexible placement.
BNC terminal allows direct connection to AMP-2 Sensor Board...
The WCS-1 water content sensor allows the user to monitor the % of water / nutrients within the growing medium.
The moisture level / water content is displayed in real-time on the WCS module itself, the Aqua-x and the APP. That data is displayed on a graph (through the APP) and helps the user visualize the dry-down time, and to make adjustments to their irrigation timers / irrigation cycles. Up to 8 WCS-1 can be connected to a single Aqua-x. When multiple..
The ECS-4 extension cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between AMP-2 sensor board and the main controller.
Features:
Seamless Connection
Plug & Play..
The NFS-2 controller from TrolMaster is one of the most advanced irrigation controllers available today. The NFS-2 is a multi-functional controller which can control multiple irrigation solenoids and pumps. The NFS-2 can also monitor multiple water sensors that can measure pH, EC / PPM, temperature and water content sensor. There is also a new optional DFW-1 flow-meter that serves multiple functions. Each of the solenoids and pumps can be "linked" to work ..
The AMP-3 Sensor Board can be used as a bridge between the sensors (pH Sensor & EC/Temp Sensor) and the Aqua-X Pro Controller. It is specially designed for the Aqua-X Pro system. It can be connected to the main controller with a standard RJ12 cable.
Multiple units can be connected into one system for multiple monitoring applications.
The pH level, EC level and water temperature will be displayed on its LCD screen and the Aqua-X Pro master controller ..
The OM-8 dry contact board allows the main controller to control up to 8 individual outputs on it. It is specially designed for the Hydro-X Pro and Aqua-X Pro system. It has 8 individual electrical contacts, and allows up to 12 Amp current through each contact.
*The OM-8 should be mounted inside an electric control cabinet, and connected to a power supply between 100-240 VAC.
*When used with the Aqua-X Pro system, OM-8 can activate pumps/solenoids at a h..
The DFM-1 is a 1" digital inline flow meter provides accurate measurements of water or a nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system. When it’s used with the Aqua-X Pro, users can set the irrigation schedule to be controlled “By volume”, and the DFM-1 will measure and allow the desired and precise amount of nutrient solution to be used. The DFM-1 sensor can also be used for future functions and may inc..