Search
Search
Product Compare (0)
19mm Tub Outlet - 3/4"
The Tub Outlet is designed to suit a range of water reticulation applications in the hydroponic and nursery industries. The outlet comes with a 13mm, 19mm or 25mm tail - together with an outlet screen and outlet extension. The Tub Outlet is the only purpose designed Flood and Drain fitting available which allows adjustable nutrient level and accommodates different tub sizes...
£5.95
Ex Tax:
13mm Barbed to 3/4" Thread Connector (Internal and External Thread)
Allows a barb fitting off a tank or reservoir. Ideal for a 27mm hole. The inner thread allows for both internal and external barb fittings...
£2.95
Ex Tax:
FloraFlex Flora Valve 3/4"
The FloraFlex® shut off valve also allows you to control the pressure of water and nutrients being delivered through the manifold to your plants. Easily snaps into the Flora Pipe Fitting T or Elbow and screws into the Quick Disconnect. Flora Pipe Fittings “T” and “Elbow,” snap into this unit with no glue required Connects with ForaFlex GHP to NPT Quick Disconnect, no threading required Manual off and on action, with easy to use valve handle Max..
£12.95
Ex Tax:
FloraFlex 3/4" Elbow Pipe Fitting
The FloraFlex® Pipe Fitting Elbow (1” or 3/4”) is used for the last manifold on your PVC line. Glue your PVC to the Flora Pipe Fitting and then easily snap the Fitting into the Flora Valve. Compatible with regular 1” or ¾” PVC pipe. Attaches to Flora Valve with snap feature (no glue required). O-Ring included. Available in 1″ or 3/4″. O-Ring should be lubed (if not already) for easy install and prevention of leakage. 120 psi PVC..
£3.95
Ex Tax:
Pressure Regulator 3/4" BSPF x 3/4" BSPM 100kPa
These regulators restrict outlet pressure to optimise dripper performance and are designed for low flow irrigation systems. Suitable for all drip, spray and sprinkler systems. Easily connect to taps, valves, tap timers and irrigation valves in a manifold system. 3/4 BSFP inlet and 3/4 BSFP outlet. Inlet pressure 0-700kPa..
£10.95
Ex Tax:
Floraflex Air Bleed Valve 3/4″
The FloraFlex® Air Bleed Valve (3/4”) should be installed at the highest point (above manifold) on any mainline to prevent air locks. When water starts to flow, air is forced out of the Air Bleed Valve. When water hits the valve, the valve closes and water flows freely through the line. This product gives you more control over the accuracy of your feedings.⠀ ¾” Male pipe thread Max operating pressure 80 psi Min operating pressure 5 psi (opens when pre..
£10.95
Ex Tax:
3/4" Water Filter
Filter 3/4" inline. Works in conjuction with 3/4" ball valve and hose tails...
£20.95
Ex Tax:
Lo-Flo Standard 3/4" Starter Kit - Water-Powered Nutrient Delivery System
This Water-Powered Standard Starter Kit includes all the parts you need for the inlet of your Nutrient Delivery System and is mainly used for high pressure situations. For systems using DAB Pumps or pumps with VFD Control, the HYKSTART-DAB can be used. To complete the LO-FLO System, you will also need Dosatron Injectors, Mixing Chamber Kit(s), the pH/EC Monitor Kit or END Kit, and the Water Hammer Arrestor Kit. Features: Union Check..
£516.95
Ex Tax:
Lo-Flo 3/4" Mixing Chamber Kit - Water-Powered Nutrient Delivery System
Water-Powered Nutrient Delivery System Mixing Chamber Kit enhances the blending as the solution passes through. It's a must for silicates. To complete the LO-FLO system, you will also need Dosatron Injectors, the DAB Starter Kit or Standard Starter Kit, Monitor Kit or END Kit, and Water Hammer Arrestor Kit. Features: Union Mixing chamber Nipples Seal thread tape Please note: Parts ordered may look slightly different than the pictu..
£153.95
Ex Tax:
Lo-Flo 3/4" Monitor Kit - Water-Powered Nutrient Delivery System
This Water-Powered Nutrient Delivery System Monitor Kit measures and displays the well-blended outgoing solution providing peace of mind. To complete the LO-FLO Nutrient Delivery System, you will also need Dosatron Injectors, the DAB Starter Kit or Standard Starter Kit, Mixing Chamber Kit(s), and the Water Hammer Arrestor Kit. Features: Union Close nipples Nipples Tee Pressure gauge tee Pressure gauge Cross Che..
£461.95
Ex Tax:
3/4" Water Hammer Arrestor Kit
Water hammer arrestor kits are used to prevent the potential damaging effects of water hammer which is defined as a pressure surge or wave caused when a fluid in motion is forced to stop or change directions suddenly. Please note: Parts ordered may look slightly different than the picture displayed, but the fit and function will be the same. Features: 3/4" MPT 6.5" tall Stainless steel water hammer arrestor Nipple Tee Elbo..
£131.95
Ex Tax:
Anti Return Valve - 3/4" (Female/Female) - Brass
Anti Return Valve - 3/4" (Female/Female) - Brass...
£8.95
Ex Tax:
Reducer Socket (PP) - 1" x 3/4" Female/Female
Reducer Socket (PP) - 1" x 3/4" Female/Female...
£3.25
Ex Tax:
Plug Connector for PE Pipe Coupling - 3/4" Valve Male 20mm
Plug Connector for PE Pipe Coupling - 3/4" Valve Male 20mm...
£2.49
Ex Tax:Plug Connector for PE Pipe Coupling - 3/4" Valve Male 25mm
Plug Connector for PE Pipe Coupling - 3/4" Valve Male 25mm...
£2.49
Ex Tax:
Plug Connector for PE Pipe Coupling - 3/4" Female Stop
Plug Connector for PE Pipe Coupling - 3/4" Female Stop...
£0.95
Ex Tax:
Reducer Nipple (PP) - 3/4" x 1/2" (Male/Male)
Reducer Nipple (PP) - 3/4" x 1/2" (Male/Male)...
£0.69
Ex Tax:Reducer Nipple (PP) - 1" x 3/4" (Male/Male)
Reducer Nipple (PP) - 1" x 3/4" (Male/Male)...
£0.69
Ex Tax:
Socket (PP) - 3/4" x 3/4" (Female/Female)
Socket (PP) - 3/4" x 3/4" (Female/Female)...
£1.25
Ex Tax:
Reducer Socket (PP) - 3/4" x 1/2" (Female/Female)
Reducer Socket (PP) - 3/4" x 1/2" (Female/Female)...
£1.95
Ex Tax:
