Environmental Controls
Environmental Controls
Product Compare (0)
GAS Enviro Controller 13AMP V2
GAS Enviro Version 2 new features: Minimum and maximum day and night fan speed settings Calibrate the sensor - both temperature and humidity Green LED indication lights - the screen and LED’s dim automatically, no light source when the unit is dimmed Control every aspect of your grow room environment from one controller with the G.A.S Enviro Controller. Control your grow room temperature and humidity by digitally controlling your fan speeds. The En..
£391.95
Ex Tax:
3/4" Water Hammer Arrestor Kit
Water hammer arrestor kits are used to prevent the potential damaging effects of water hammer which is defined as a pressure surge or wave caused when a fluid in motion is forced to stop or change directions suddenly. Please note: Parts ordered may look slightly different than the picture displayed, but the fit and function will be the same. Features: 3/4" MPT 6.5" tall Stainless steel water hammer arrestor Nipple Tee Elbo..
£131.95
Ex Tax:
Filter Packs for DXB 50 & DXB 100
DXB 50 & DXB 100 filters should be replaced every 3 months to protect the equipment...
£55.95
Ex Tax:Filter Packs for DXM 50 & DXM 100
DXM 50 & DXM 100 filters should be replaced every 3 months to protect the equipment...
£55.95
Ex Tax:
GAS Enviro4 Fan Controller
The Envrio4 controller developed by Global Air Supplies gives you complete control of your environment so you can optimise your grow. It controls EC fan speeds and can also regulate ‘on’ and ‘off’ times for practically any piece of equipment in your grow room (via the four programmable sockets). This simplifies your set-up, making it easy to control your grow room and maintain a perfect environment from a single point. With the Enviro4 you can centralis..
£436.95
Ex Tax:
GAS EC2 Controller
Create the perfect environment with this small but powerful EC controller with built-in fan balancer. An active controller which will control intake and outtake fans thermostatically. Powered from the fan, there is no need for an extra power supply. The built in fan balancer allows fine tuning of difference in speed between the intake and outtake fan making sure you can create the perfect balance between the fans. A small but powerful controller to ..
£121.95
Ex Tax:
GroLab Conductivity Probe
Probe for measuring EC of a liquid solution. This conductivity probe comes with an electrode capable of constantly acquires EC values from your solution. With a 2 meters cable and an BNC connector easily connect this probe with TankBot and start getting all the information that you may need from your solution. Specifications: Operating Voltage: 5 VDC Sensor Type: Electrode Cell Constant: 1.0 ± 2 Measuring Range: 0 to 19990 μS/cm Accuracy:..
£93.95
Ex Tax:
GroLab Doser Starter Kit
GroLab™ Doser Kit is a powerful grow controller that allows to fully monitor and automate the feeding solution of your plants. Nutrients control, pH correction, water level warnings, auto tank refill, are some functions of this kit. This kit also provides the necessary tools to create security systems to react and/or notify if any issues arise. Remote control, real-time notifications, IP cameras integration... are just some of the perks you get with GroL..
£878.95
Ex Tax:
GroLab EC Online Probe
Probe for measuring EC of a liquid solution. Accurate and resistant to environment conditions With this probe, the immersion time doesn't affects directly the EC sampling, that way it's possible to let the probe immersed without calibration for a longer period of time. With a 2 meters cable and an BNC connector easily connect this probe with TankBot and start getting all the information that you may need from your solution. Specifications: Operating ..
£319.95
Ex Tax:
GroLab Flood Detector
Sensor that detects water excesses and leaks. It's able to provide your grow, flood prevention and detection. Easily connect this flood detector to your SoilBot or PowerBot and maintain your grow protected from flood risks. Flood Detector Interface This sensor is directly compatible with any SoilBot or PowerBot. It can also be used by third party acquisition devices like an Arduino. Specifications: Compatibility: GroLab SoilBot, GroLab PowerBot, Gr..
£27.95
Ex Tax:
GroLab GroNode
The GroLab™ central controller. GroNode manages all the GroLab™ modules while allowing you to configure any automation procedures based on sensors and devices available. Executes hundreds of instructions and stores a large amount of data regarding of your grow variables. It is the heart and the brain of entire GroLab™ system A state of the art growing unit that interacts with other GroLab™ modules simulating the operation of a brain. It is capable to exe..
£396.95
Ex Tax:
GroLab Hydro Starter Kit
GroLab™ Hydro Kit is a powerful grow controller that allows to fully monitor and automate the climate, lighting, irrigation, pH correction, nutrients dosing, and all the tank management tasks. This kit also provides the necessary tools to create security systems to react and/or notify if any issues arise. Remote control, real-time notifications, IP cameras integration... are just some of the perks you get with GroLab™. Includes: 1 - StarterKit..
£1,427.95
Ex Tax:
GroLab Level Sensor
Horizontal level sensor for liquids. Constructed with a wall mounting typology and floating properties, it allows you to monitor your water tank level. Connect it to TankBot or PowerBot and create procedures to automate the refill, drain and more. Water Level Sensor Interface This sensor is directly compatible with any TankBot. It can also be used by third party acquisition devices like an Arduino. Specifications: Max Switching Voltage: 200 V..
£16.95
Ex Tax:
GroLab Moisture Sensor
Sensor for measuring Substrate Humidity. This moisture sensor is capable to monitor any substrate's regardless of whether it is soil, rock wool, coconut or a recurrent dipping of roots in water. With a 2 to 10 meters cable you can easily connect this sensor to SoilBot and keep your grow with perfect moisture for your plants avoiding water wasting. Soil Moisture Sensor Interface This sensor is directly compatible with any SoilBot. It can also be..
£24.95
Ex Tax:
GroLab Motion Sensor
Infrared motion detector. With anti-white light function and anti tamper switch system, automatically detects movements on a wide detection area. Connect it to TankBot and create your own security system. Motion Detector Interface This sensor is directly compatible with any TankBot or PowerBot. It can also be used by third party acquisition devices like an Arduino. Specifications: Operating Voltage: 12VDC Operation mode: N.C. (Normaly Closed) Con..
£38.95
Ex Tax:
GroLab PowerBot
A powerful unit capable of monitor and control all the basic elements of your grow. Automate temperature, humidity, air flow, lighting and irrigation and even create safety protocols & procedures for fire or flood detection. Get every variable under your direct control, enabling you to maximize your growth and efficiency. The Complete All In One Power Module PowerBot allows you to connect and control the electrical peripherals of your growing enviro..
£542.95
Ex Tax:
GroLab Pre assembled Solenoid Cable
Pre assembled 4 Conductors cable with female connection for TankBot and quick connectors for Solenoid Valves. Supports two different solenoid valves. Solenoid valves pre assembled cable This cable is compatible with TankBot, and presents also quick connectors compatible with solenoid valves. Specifications: Max. Voltage: 300V Wire Gauge: 22 AWG Material: Copper, Bare Insulation: PVC Strand: 7/30 Material: Copper, Bare Diameter: 3.18mm ..
£18.95
Ex Tax:
GroLab Pro Starter Kit
GroLab™ Pro Kit is the most complete automation kit you'll ever get. It allows to fully monitor and automate the climate, lighting, irrigation, pH correction, nutrients dosing, and all the tank management tasks, while constantly checking your substrate moisture and feeding your plants only when necessary. This kit also provides the necessary tools to create security systems to react and/or notify if any issues arise. Remote control, real-time notificatio..
£1,865.95
Ex Tax:
GroLab Smoke Detector
Photoeletric Smoke detector. Capable of detecting white and black smoke and a 360ยบ detection area, this is a high sensitivity sensor that will alert you in case of fire. Connect it to TankBot or PowerBot and create your own security system. Smoke Detector Interface This sensor is directly compatible with any TankBot or PowerBot. It can also be used by third party acquisition devices like an Arduino. Specifications: Operating Voltage: 12VDC Operat..
£40.95
Ex Tax:
GroLab Soil Starter Kit
GroLab™ Soil is a powerful grow controller that will not only control the basic lighting and climate for you but also provide smart irrigation for your plants. With SoilBot, GroLab™ is always aware of the moisture of your substrate, feeding your plants only when they really need. A handy flood detector is also included to warn you of possible leaks or floods. Remote control, real-time notifications, IP cameras integration... are just some of the perks you..
£1,316.95
Ex Tax:
GroLab SoilBot
SoilBot is the perfect tool for analyzing plant substrates, whether in soil, rock wool, coconut fiber or even recurrent dipping of roots in water! SoilBot is continuously receiving data from various sensors, such as: humidity, temperature and even flood detection. In this way, you will always know the condition of the substrate and even if there is a problem, such as water leaks, plants with water shortage, etc. The Versatile Substrate Analyser ..
£438.95
Ex Tax:
GroLab Solenoid Valve
12V Solenoid Valve for liquids. With this solenoid you'll be able to define irrigation paths and manage water refills or drains. Solenoid Valve Interface This device is directly compatible with any TankBot. Specifications: Operating Voltage: 12VDC Operation mode: NC (Normaly Closed) Response Time:ON = 0.15s, OFF = 0.3s Estimated Valve life: 500 000 cycles Filter: Stainless Steel inlet Working Pressure: 0.02-0.8MPa IN/OUT Ports: ..
£38.95
Ex Tax:
GroLab Starter Kit
GroLab™ Starter Kit is a powerful grow controller that fully monitors and automates all the basic elements of any growing environment. It can handle lighting, climate, irrigation, and even detect fires, floods and low water levels on your tank. All in the same system. Remote control, real-time notifications, IP cameras integration... are just some of the perks you get with GroLab™. Includes: 1 - GroNode 1 - PowerBot 1 - GroLab™ software, ma..
£878.95
Ex Tax:
GroLab TankBot
Indispensable as a nutrients and pH controller, water tank level manager or even a security system. It can control any 12v actuators like water valves or peristaltic pumps, while also analyzing the water solution in your tank thanks to the pH, EC, Temperature and water level sensors. Refill the tank, recycle the water and even automatically control the nutrients and pH. The Powerful Tank Manager TankBot is the most versatile and precise module f..
£548.95
Ex Tax:
GroLab Temperature Sensor (Air/Water/Soil)
Sensor for measurements of Air, Soil and Water Temperature. With waterproof protection and a stainless steel enclosure this is an sensor that is capable to resist to all the elements and at the same time be accurate and reliable. Easily connectable to your module. Temperature Sensor Interface This sensor is directly compatible with any TankBot, SoilBot or UserBot. It can also be used by third party acquisition devices like an Arduino. Below you ..
£22.95
Ex Tax:
GroLab UserBot Shield for Arduino
The UserBot allows you to integrate your Arduino with the GroLab™ system! Use your own sensors and peripherals on your Arduino and get all the control, automation and monitoring that GroLab™ offers. In short, can create your own GroLab™ module! Contains the entire GroLab™ communication layer and a board with prototyping space for your sensors and circuits. Includes: 1 - UserBot Shield w/Antenna *Additional GroLab™ module, one GroNode is nec..
£60.95
Ex Tax:
Growlink ESM3 Eco Climate Sensor (SDI-12)
The ESM3 Eco climate sensor is designed for Growlink controllers that support SDI-12. This sensor includes air temperature, humidity, VPD and photocell with optional CO2. Support for multiple sensors give you the ability to be averaged or used as seperate sensors. Professional growers can rely on this sensor for accurate data and confidence in their growing environment. Features: RH, T, VPD, Photocell, optional CO2 Temp and pressure compensation w..
£405.95
Ex Tax:
Growlink Precision Irrigation Controller (International Version)
Introducing the Smart Irrigation Controller, the perfect solution for precision irrigation management. The controller features a worldwide universal plug, making it compatible with all countries. With 4 x 24VAC output channels for valve control and 4 x substrate sensor inputs, you can easily connect the Growlink Capacitance or Acclima TDR (VWC, EC, Temp) substrate sensors for real-time monitoring and valve control. App Support The IOS and Android app (En..
£744.95
Ex Tax:
Growlink Precision Irrigation Controller with 1 Sensor (International Version)
Introducing the Smart Irrigation Controller, the perfect solution for precision irrigation management. The controller features a worldwide universal plug, making it compatible with all countries. With 4 x 24VAC output channels for valve control and 4 x substrate sensor inputs, you can easily connect the Growlink Capacitance or Acclima TDR (VWC, EC, Temp) substrate sensors for real-time monitoring and valve control. App Support The IOS and Android app (En..
£1,410.95
Ex Tax:
Growlink Precision Irrigation Controller with 2 Sensors (International Version)
Introducing the Smart Irrigation Controller, the perfect solution for precision irrigation management. The controller features a worldwide universal plug, making it compatible with all countries. With 4 x 24VAC output channels for valve control and 4 x substrate sensor inputs, you can easily connect the Growlink Capacitance or Acclima TDR (VWC, EC, Temp) substrate sensors for real-time monitoring and valve control. App Support The IOS and Android app (En..
£1,948.95
Ex Tax:
Growlink Precision Irrigation Controller with 3 Sensors (International Version)
Introducing the Smart Irrigation Controller, the perfect solution for precision irrigation management. The controller features a worldwide universal plug, making it compatible with all countries. With 4 x 24VAC output channels for valve control and 4 x substrate sensor inputs, you can easily connect the Growlink Capacitance or Acclima TDR (VWC, EC, Temp) substrate sensors for real-time monitoring and valve control. App Support The IOS and Android app (En..
£2,482.95
Ex Tax:
Growlink Precision Irrigation Controller with 4 Sensors (International Version)
Introducing the Smart Irrigation Controller, the perfect solution for precision irrigation management. The controller features a worldwide universal plug, making it compatible with all countries. With 4 x 24VAC output channels for valve control and 4 x substrate sensor inputs, you can easily connect the Growlink Capacitance or Acclima TDR (VWC, EC, Temp) substrate sensors for real-time monitoring and valve control. App Support The IOS and Android app (En..
£2,999.95
Ex Tax:
Growlink Teros12 Solus Adapter (Pack of 4)
Use your Teros 12 sensors with the Growlink PIC controller. Stop paying high annual subscription fees Use your Teros 12 sensors to directly control irrigation events Works with Growlink Crop Steering program Easy Plug and Play Setup Please note: This product is the adaptor only (Pack of 4)...
£108.95
Ex Tax:
Growlink Terralink Soil Moisture Sensor (VWC, EC, Temp)
Introducing the Terralink Soil Moisture Sensor, featuring the industry-leading capacitance technology. Designed to provide precise and reliable soil moisture data, our sensor helps you optimize your farm's irrigation system and make better-informed decisions for your crops. With the Terralink Soil Moisture Sensor, you can ensure your plants receive the right amount of water at the right time, reducing waste and maximizing yield. Key Features Unparalleled..
£537.95
Ex Tax:
Hub Reservoir Kit
Reservoir Kit (Hub Base + pH/EC/W.Temp probes) Everything you need for 24/7 continuous monitoring of pH, EC and temperature in reservoirs. Expandable up to 12 Hub-ready sensors. This kit includes: 1x Hub Base1x PH-1 Probe: pH (15ft cable)1x EC-1 Probe: EC + water temp (15ft cable)1x Backbone Extension Cable (6ft/2m) 1x 3-way T Connector..
£998.95
Ex Tax:
Lo-Flo 3/4" DAB Starter Kit - Water-Powered Nutrient Delivery System
This Water-Powered Nutrient Delivery System DAB Starter Kit includes all the parts you need for the inlet of your Nutrient Delivery System, and is used in in conjunction with DAB Pumps, or pumps with VFD Control. The Nutrient Delivery System DAB Starter Kit does not include a pressure regulator – for systems with inconsistent or high pressure situations, the Standard Starter Kit should be used. To Complete the LO-FLO Nutrient Delivery System, you will a..
£395.95
Ex Tax:
Lo-Flo 3/4" Mixing Chamber Kit - Water-Powered Nutrient Delivery System
Water-Powered Nutrient Delivery System Mixing Chamber Kit enhances the blending as the solution passes through. It's a must for silicates. To complete the LO-FLO system, you will also need Dosatron Injectors, the DAB Starter Kit or Standard Starter Kit, Monitor Kit or END Kit, and Water Hammer Arrestor Kit. Features: Union Mixing chamber Nipples Seal thread tape Please note: Parts ordered may look slightly different than the pictu..
£153.95
Ex Tax:
Lo-Flo 3/4" Monitor Kit - Water-Powered Nutrient Delivery System
This Water-Powered Nutrient Delivery System Monitor Kit measures and displays the well-blended outgoing solution providing peace of mind. To complete the LO-FLO Nutrient Delivery System, you will also need Dosatron Injectors, the DAB Starter Kit or Standard Starter Kit, Mixing Chamber Kit(s), and the Water Hammer Arrestor Kit. Features: Union Close nipples Nipples Tee Pressure gauge tee Pressure gauge Cross Che..
£461.95
Ex Tax:
Lo-Flo Standard 3/4" Starter Kit - Water-Powered Nutrient Delivery System
This Water-Powered Standard Starter Kit includes all the parts you need for the inlet of your Nutrient Delivery System and is mainly used for high pressure situations. For systems using DAB Pumps or pumps with VFD Control, the HYKSTART-DAB can be used. To complete the LO-FLO System, you will also need Dosatron Injectors, Mixing Chamber Kit(s), the pH/EC Monitor Kit or END Kit, and the Water Hammer Arrestor Kit. Features: Union Check..
£516.95
Ex Tax:
Nutrient Injector D07RE125VF
The standard dosing range D07 meets the dosing requirements for flow rates from 5 to 700 l/h. Proportional dosing and without electricity Proportionality dependent on water flow Compact ergonomics Outlet injection Specifications: Injection range 0,15 - 1,25 % [1:666 - 1:80] Water flow range 5 l/h - 0,7 m3/h Operating water pressure 0,3 - 6 bar Concentrated additive injection 0,0075 l/h - 8.75 l/h Stroke volume ~ 0,225 l Con..
£435.95
Ex Tax:
Nutrient Injector D07RE5VF
The standard dosing range D07 meets the dosing requirements for flow rates from 5 to 700 l/h. Proportional dosing and without electricity Proportionality dependent on water flow Compact ergonomics Outlet injection Specifications: Injection range 0,8 - 5,5% [1:128 - 1:18] Water flow range 5 l/h - 0,7 m3/h Operating water pressure 0,3 - 6 bar Concentrated additive injection 0,8 l/h - 38,5 l/h Stroke volume ~ 0,225 l Connectio..
£494.95
Ex Tax:
Nutrient Injector D20GLVF
Installed on the water network, the DOSATRON uses water pressure as the only driving force. When activated, it sucks in the concentrated product, doses it to the desired percentage, then mixes it with the driving water. The solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through the DOSATRON, regardless of variations in flow rate or system pressure. Externally adjustable proportional d..
£2,276.95
Ex Tax:
Nutrient Injector D3GL2VF
The fertilization reference More efficient An optimized design Really adapted to the evolution of practices and treatments Highly ergonomic adjustment Specifications: Injection range 0,2 - 2 % [1:500 - 1:50] Water flow range 10 l/h - 3 m3/h Operating water pressure 0,3 – 6 bar Concentrated additive injection 0,02 l/h – 60 l/h Stroke volume ~ 0,53 l Connections NPT-BSP Ø 20x27 - 3/4"M Hose PVC Ø 8x12 - Lg 1,75m..
£549.95
Ex Tax:
Nutrient Injector D3GL3000VF
The fertilization reference More efficient An optimized design Really adapted to the evolution of practices and treatments Highly ergonomic adjustment Specifications: Injection range 0,03 - 0,3 % 1:3000 - 1:333] Water flow range 10 l/h - 3 m3/h Operating water pressure 0,3 - 6 bar Concentrated additive injection 0,003 l/h - 9 l/h Stroke volume ~ 0,53 l Connections NTP-BSP 3/4'' M Ø 20x27mm Hose PE Ø 4x6 - Lg 1,75m..
£740.95
Ex Tax:
Nutrient Injector D45RE1.5VF
Installed on the water network, the DOSATRON uses water pressure as the only driving force. When activated, it sucks in the concentrated product, doses it to the desired percentage, then mixes it with the driving water. The solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through the DOSATRON, regardless of variations in flow rate or system pressure. Externally adjustable proportional d..
£758.95
Ex Tax:
Nutrient Injector D45RE3VF
Installed on the water network, the DOSATRON uses water pressure as the only driving force. When activated, it sucks in the concentrated product, doses it to the desired percentage, then mixes it with the driving water. The solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through the DOSATRON, regardless of variations in flow rate or system pressure. Externally adjustable proportional d..
£808.95
Ex Tax:
Nutrient Injector D45RE8
Installed on the water network, the DOSATRON uses water pressure as the only driving force. When activated, it sucks in the concentrated product, doses it to the desired percentage, then mixes it with the driving water. The solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through the DOSATRON, regardless of variations in flow rate or system pressure. Externally adjustable proportional d..
£912.95
Ex Tax:
Nutrient Injector D8RE5VF
Installed on the water network, the DOSATRON uses water pressure as the only driving force. When activated, it sucks in the concentrated product, doses it to the desired percentage, then mixes it with the driving water. The solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through the DOSATRON, regardless of variations in flow rate or system pressure. Externally adjustable proportional d..
£1,352.95
Ex Tax:
Nutrient Injector D9GL2VF
More reliable, more resistant to chemicals, very easy to maintain without tools... DOSATRON® presents the new special fertigation dosing pump, the latest addition to the Green Line dedicated to irrigation systems. It operates on irrigation networks from 500 l/h to 9 m3/h. Fertilizers and products, liquid or soluble, conventional or organic, are injected over a dosage range of 0.2% to 2% and 1% to 5%. The fertigation reference Ideal in..
£1,543.95
Ex Tax:
Nutrient Injector D9GL2VF
The fertigation reference Ideal in harsh hydraulic conditions Convenient maintenance Optimized chemical resistance Enhanced reliability thanks to an extremely optimized design Specifications: Injection range 0,2 - 2% [1:500 - 1:50] Water flow range 500 l/h - 9 m3/h Operating water pressure 0,3 - 8 bar Concentrated additive injection 1 - 180 l/h Stroke volume ~ 1,7 l Connections NPT-BSP 1''1/2 M Ø 40x49mm Hose PVC Ø 16x22m..
£1,160.95
Ex Tax:
Pre assembled Peristaltic Cable
Pre assembled 4 Conductors cable with female connection for TankBot and quick connectors for Peristaltic Pumps. Supports two different peristaltic pumps. This cable is compatible with TankBot, and presents also quick connectors compatible with peristaltic pumps. Specifications: Max. Voltage: 300V Wire Gauge: 22 AWG Material: Copper, Bare Insulation: PVC Strand: 7/30 Material: Copper, Bare Diameter: 3.18mm Thickness: 0.381mm Operating..
£18.95
Ex Tax:-228x228.jpg "Proguard DXB 100 with BPI (500 sq ft)")
Proguard DXB 100 with BPI (500 sq ft)
Defender DXB 100 with BPI has been designed and engineered to deliver sanitization that is proven to reduce & eradicate surface and airborne pathogens for high load environments in Cultivation Centers using the ProGuard Sanitization Technology. Defender DXB 100 with BPI is easy to install and maintain as it operates 24/7 in facilities. ProGuard Sanitization has been tested and validated by reputable labs across the world to ensure safety and effe..
£1,474.95
Ex Tax:-228x228.jpg "Proguard DXB Mini with BPI (250 sq ft)")
Proguard DXB Mini with BPI (250 sq ft)
Defender DXB Mini with BPI has been designed and engineered to deliver sanitization that is proven to reduce & eradicate surface and airborne pathogens for high load environments in Cultivation Centers using the ProGuard Sanitization Technology. Defender DXB Mini with BPI is easy to install and maintain as it operates 24/7 in facilities. ProGuard Sanitization has been tested and validated by reputable labs across the world to ensure safety and..
£863.95
Ex Tax:
Proguard Replacement DXB 100 PCO Cell
The PCO Cell is the sanitization creator. It should be replaced every year to ensure the sanitization created will protect the facility...
£242.95
Ex Tax:
Proguard Replacement DXB Mini PCO Kit
The PCO Cell is the sanitization creator for the DXB Mini. It should be replaced every year to ensure the sanitization created will protect the facility...
£209.95
Ex Tax:Proguard Replacement DXM 100 PCO Cell
The PCO Cell is the sanitization creator. It should be replaced every year to ensure the sanitization created will protect the facility...
£236.95
Ex Tax:
Pulse Hub Base
Professional-grade environmental monitoring made easy. Pulse Hub supports a versatile suite of industrial-grade sensors that provide you with the data needed to optimize growth conditions and give you a full understanding of every aspect of your grow...
£561.95
Ex Tax:Pulse Hub Starter Kit
Starter Kit (Hub Base + Air Temperature, Humidity, & VPD Probe) Everything you need for 24/7 continuous monitoring of air temperature, humidity, and VPD. Expandable up to 12 Hub-ready sensors. This kit includes: 1x Hub Base 1x THV-1: Air Temperature, Humidity, & VPD Probe 1x Backbone Extension Cable (6ft/2m) 1x 3-way T Connector..
£623.95
Ex Tax:
Pulse Hub VWC Kit
VWC Kit (Hub Base + Acclima TDR-310W VWC Probe) Everything you need for 24/7 continuous monitoring of soil moisture, EC, and temp. Expandable up to 12 Hub-ready sensors. This kit includes: 1x Hub Base 1x VWC-1 Probe: Acclima TDR-310W Volumetric Water Content (soil moisture, temp, and EC) 1x Backbone Extension Cable (6ft/2m) 1x 3-way T Connector..
£998.95
Ex Tax:
Pulse One
Increase your yields and prevent crop loss. The Pulse One smart grow room monitor lets you to track and optimize the essential environmental conditions in your grow, and will send you instant alerts if something goes wrong. Dial in your grow with 24/7 live and historical data: Vapor Pressure Deficit Temperature Relative Humidity Light Intensity Dew Point Get peace of mind with our cross-platform app: Instant, reliable alerts, customized for y..
£242.95
Ex Tax:
Pulse Pro
Make your next crop your best. Pulse Pro, the ultimate grow room monitor, lets you track and optimize every essential environmental condition in your grow, and will send you instant alerts if something goes wrong. Get the full picture of what’s going on in your grow: CO2 PPFD/PAR & DLI Spectrometer Improve consistency and quality with 24/7 live and historical data: Vapor Pressure Deficit Temperature Relative Humidity Light Intensity Dew..
£588.95
Ex Tax:
Pulse Zero
Pulse Zero is a redesign of our most popular sensor, Pulse One. Utilizing the same connectivity platform and internal components, Pulse Zero is a more compact and affordable sensor while still maintaining the outstanding reliability and accuracy of all Pulse products. Our smart grow room monitor lets you track and optimize the essential environmental conditions in your grow, and will send you instant alerts if someth..
£161.95
Ex Tax:
Trolmaster (DFM-2) 1.25" Digital Flow Meter
The DFM-2 is a 1.25" digital inline flow meter provides accurate measurements of water or a nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system. When it’s used with the Aqua-X Pro, users can set the irrigation schedule to be controlled “By volume”, and the DFM-2 will measure and allow the desired and precise amount of nutrient solution to be used. The DFM-2 sensor can also be used for future functions and may..
£172.95
Ex Tax:
Trolmaster (DFM-3) 1.5” Digital Flow Meter
The DFM-3 is a 1.5" digital inline flow meter that provides accurate measurements of water or a nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system. When it’s used with the Aqua-X Pro, users can set the irrigation schedule to be controlled “By volume”, and the DFM-3 will measure and allow the desired and precise amount of nutrient solution to be used. The DFM-3 sensor can also be used for future functions and..
£177.95
Ex Tax:-EC-Fan-Control-Adapter-for-Tent-X-228x228.jpg "Trolmaster (EFC-1) EC Fan Control Adapter for Tent-X")
Trolmaster (EFC-1) EC Fan Control Adapter for Tent-X
The TrolMaster EFC-1 is specially designed to be used with Tent-X Control System to control the variable fan speed of the EC Fan. The EFC-1 needs to select the mode of output to control the EC Fan in PWM or 0-10V. Each Tent-X can connect a corresponding EFC-1 for Exhaust (F1) and Intake (F2). Each Exhaust (F1)/ Intake (F2) line requires one EFC-1. Package Contents: 1x EC Fan Control Adapter Features: LCD Display for PWN 0-10V Mode Addres..
£81.95
Ex Tax:
Trolmaster (HCS-1) Hydro-X Environment Control System
The Hydro-X system is a professional-grade single zone environmental controller. It is a fully customizable modular designed system. Installation is simple and the system is easy to expand. The Hydro-X system can control almost anything within a growing area. To eliminates interference in the grow environment, all of the sensors and control modules are HARD-WIRED by standard RJ12 cable and splitters, making installation as simple as plug-and-play. ..
£392.95
Ex Tax:-Hydro-X-Plus-Controller-228x228.jpg "Trolmaster (HCS-3) Hydro-X Plus Controller")
Trolmaster (HCS-3) Hydro-X Plus Controller
The Hydro-X Plus / HCS-3 system is a professional-grade single-zone environmental control system that can control your entire grow space. It has an 800x480 7” LED display monitor and can control an unlimited number of lights, 8 temperature devices, 8 humidity devices, 4 CO2 devices, and 12 programmable timer devices. With incredible flexibility and the expanded product capacity, anyone can now easily customize their own grow room control system for maximum..
£2,048.95
Ex Tax:
Trolmaster (LMA-11) Lighting Control Adapter P
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. This Lighting Con..
£65.95
Ex Tax:
Trolmaster (OAT-24) 12 Outputs 24V Control Board
The OAT-24 module is specifically designed for the Aqua-X Pro Irrigation Control System. It features 12 individual 24V outputs that can control up to 12 individual 24-volt irrigation solenoids. By using multiple OAT-24 modules, the Aqua-X Pro Irrigation Control System can manage up to 600 individually controlled 24 valves. Each of the solenoid valves can be independently configured by the users with one of the five control modes. Feed by: Recycle, Schedule..
£412.95
Ex Tax:
Trolmaster (TCS-1) Tent-X System Main Controller
TrolMaster's Tent-X (TCS-1) is a state-of-the-art professional-grade and modularly designed environmental and irrigation control system, designed for single-zone grow tents. Thanks to the controller's compact hydroponic capabilities, it allows the user to effectively control their tent's environmental parameters and irrigation schedule with a single control system. It comes with a 3-in-1 temperature, humidity, and light sensor, the MBS-TH. Users can daisy..
£351.95
Ex Tax:
TrolMaster (HCS-2) Hydro-X Pro Control System
The New TrolMaster Hydro-X Pro HSC-2 Please note: 4 week lead time on this product. TrolMaster revolutionized environmental controller technology when it introduced the Hydro-X. The Hydro-X Pro continues the revolution with a 10’ touch-screen and a web-based software. The Hydro-X Pro is backwards compatible with all current Hydro-X control / device modules. It also provides greater flexibility and allows any plug-in module to be addressed to be whatever..
£3,365.95
Ex Tax:
GAS EC5 Fan Speed Controller
Take total control over your EC Systemair fans with the EC5 Controller - our newest EC controller. The EC5 Fan Controller plugs directly into any of the Systemair EC fan range. A thermostatic controller with RTT technology - the EC5 Controller intelligently reacts to changes in your grow room temperature and will increase or decrease your fans speeds accordingly. Easy to set up and to use, just plug the controller straight into your EC fan with no power ..
£192.95
Ex Tax:
Growlink Precision Irrigation Growth Bundle
Optimize your cultivation with precision: Introducing the ultimate automation in irrigation management. Our AI-driven crop steering program, a first in the market, empowers you to automate your irrigation effortlessly. Utilize sensor triggers, timers, and schedules to ensure your crops receive exactly what they need, when they need it. Elevate your agriculture technology and put your irrigation on autopilot. Experience unparalleled efficiency a..
£1,508.95
Ex Tax:
GAS AC1 Fan Speed Controller
The latest addition to GAS’ range of controllers, the new AC 1 is the easy and effective way to control AC fans. The controller has two modes to ensure you can maintain a perfect environment. Either set fan speed manually, or control thermostatically. Mode 1 - when the temperature probe is connected, the controller will thermostatically control your grow room environment Mode 2 - when the temperature probe is disconnected, the controller will run at m..
£81.95
Ex Tax:
THV-1: Temperature, Humidity, & VPD Sensor
Temperature, Humidity, and VPD Sensor IP44 Splash resistant. Suitable for extremely humid environments (clone domes, highland chambers, etc) 5ft cable Hub-ready..
£86.95
Ex Tax:
GAS Pro Step Controller 8 AMP
The GAS Step Controllers are the best AC fan controllers available. Quiet, simple to use and the most efficient way to regulate your AC fans, with no clicking between steps like other AC fan controllers. The digital controller technology with solid state relays create a top quality 5 step transformer. Made in Europe to the highest quality standards, the silent seamless changes between steps removes the loud clicking that some controllers have. ..
£385.95
Ex Tax:
GAS AC-EC Controller 10 AMP
Take total control over your ventilation system. Thermostatically control your intake and outtake fans. Control AC and EC fans up to a total load of 10 amps. Temperature and humidity control Set maximum and minimum fan speeds Set day and night temperature and humidity values Set negative pressure Plugs directly into all Systemair’s AC and EC fans NO EC cables supplied The AC-EC Controller now supports the HyperFan V2, please purchase Cable Pack 1..
£280.95
Ex Tax:
GAS EC1 Single Fan Controller
The GAS EC1 thermostatic speed controller is the perfect way to control your outtake EC fans. With a minimum and maximum speed control and powered from the fan, there is no need for a power pack. Temperature control your fan Set maximum fan speed to reduce running costs and reduce noise Set minimum fan speed. Keep air fresh and CO2 rich Plugs directly onto Systemair’s EC fan range Please note: Must be used with Active Cables. Comes with 1 x ..
£79.95
Ex Tax:
GAS EC Fan Speed Controller
The GAS EC speed controller is the perfect way to control the speeds of two EC fans. Powered from the fan there is no need for a power pack. Precisely set your intake fan speed Control the maximum speeds of two fans Precisely set your outtake fan speed Balance your fans, to achieve the required negative pressure Plugs directly onto Systemair’s EC fan range Please note: Must be connected using Active Cables The GAS EC speed controller now supports..
£49.95
Ex Tax:
GAS EC Temperature Speed Fan Controller
GAS digital EC fan controllers have been specifically designed to control the Revolution Vector fan range. They control the fans correctly through 0-10 Volts. 100 steps for smooth linear control No humming from the fans Save on power cost Precise climate room control Shows minimum and maximum temperature Switch between ºC and ºF Plugs directly onto Vector EC fans Digital EC Fan Balancer The Digital EC fan Balancer (sold separately) is an add on..
£146.95
Ex Tax:
Growlink TDR310W Acclima Substrate Sensor
A fully integrated digital TDR soil moisture sensor from the Soil Smart series. Works well in various soil types and soilless media. Sized with 10 cm waveguide rods to fit well with rockwool cubes. Features SDI-12 Interface 3-element 10 cm stainless steel waveguide 5 m 3-conductor waterproof cable (standard) Waterproof Epoxy-filled Housing 20% to 80% Incident Wave Rise Time: 300 ps Waveform Digitizing Resolution: 5 ps Incident Wave Amplitude:&nbs..
£537.95
Ex Tax:
Growlink Teros 12 Adapter Extension Cable 25 Feet
25ft extention cable for the Teros 12 adapter...
£34.95
Ex Tax:
Defender Guardian with BPI
Special Order Product - Contact Us for Quote - Price TBC Defender Guardian has been designed and engineered to deliver sanitization that is proven to reduce & eradicate surface and airborne pathogens for high load environments in Cultivation Centers using the ProGuard Sanitization Technology. Defender Guardian is easy to use as a mobile unit in your facility. ProGuard Sanitization has been tested and validated by reputable labs across the worl..
£0.00
Ex Tax:
Defender OdorPro
Special Order Product - Contact Us for Quote - Price TBC Defender OdorPro has been designed and engineered to deliver a proven technology that eliminates odors exhausted from Cultivation Centers. Defender OdorPro has been tested and validated by reputable labs across the world to safely and effectively eliminate even the strongest odors. OdorPro destroys odor-causing bacteria and gases in areas of high VOC concentration like exhaust systems. Appli..
£0.00
Ex Tax:
Lumatek Master Controller 3.0
Take control of your environmental grow stages to the next level. Ensure the right light quantity and intensity adjustments to maximize crop quality and yields. Features Light intensity control, 0-100% controllable. Connect to independent zones. Sunrise and sunset – Program ON/OFF. Daily photoperiod control. Monitor temperature, CO2 ppm levels and relative humidity. Adjustable light intensity on the interface (easy access). Automatic and configur..
£495.95
Ex Tax:
pureAir HVAC
Special Order Product - Contact Us for Quote - Price TBC pureAir HVAC has been designed and engineered to deliver sanitization that is proven to reduce & eradicate surface and airborne pathogens in HVAC systems in Cultivation Centers using the Active Radiant Catalysis (ARC®) Technology. pureAir HVAC with BPI pureAir HVAC is easily installed in HVAC systems. ARC® Technology has been tested and validated by reputable labs across the world to ensure saf..
£0.00
Ex Tax:
