Environmental Accessories
Environmental Accessories
Product Compare (0)
Air Comfort WIFI Hub 16A
Connect automaticly with your room on the go, includes 16A on / off function for heater / water system or humidifier...
£88.95
Ex Tax:
Air Comfort Wireless Connection Full Kit
Full kit includes: AirComfort SoilQuality Probe iBebot Hub Monitors: Humidity Temperature Soil Moisture Soil Nutrient Data Logging ..
£176.95
Ex Tax:
Apogee AA-100 Protective Carry Case
Protective carrying case designed to transport and store Apogee meters, sensors, and accessories. Please note, this case does not fit the AM-320 underwater wand. It will fit a AM-310 telescopic wand, but that wand is not recommended for underwater use...
£38.95
Ex Tax:
Apogee AM-310: Sensor Wand
This accessory incorporates a mounting fixture at the end of a telescopic wand extendable to 33 inches (84 cm) allowing the user to place Apogee sensors in hard to reach areas. The platform features two mounting holes to accommodate both our narrow and wider diameter radiation sensors. This wand is not suited for wet environments. For freshwater and saltwater use, we recommend our other wand, the AM-320...
£87.95
Ex Tax:-228x228.jpg "Apogee AM-320 Water Submersible Sensor Wand")
Apogee AM-320 Water Submersible Sensor Wand
This accessory incorporates a mounting fixture at the end of a 40 inch (102 cm) segmented fiberglass wand and is well-suited for fresh and saltwater use. The wand unscrews into three sections for easier storage and transport. All radiation sensors are compatible with the wand, which allows the user to place the sensor in hard to reach areas such as in aquarium tanks and greenhouses...
£109.95
Ex Tax:
Apogee DLI-500 PAR Meter
Apogee's new DLI-500 meter is designed to measure photosynthetically active radiation (PAR) 400–700 nm and is accurate under all light sources. If you are looking for a low-cost option that is accurate under sunlight and some broadband light sources see our DLI-400 model. In addition to measuring PAR, the DLI-500 meter calculates daily light integral (DLI) and photoperiod. DLI refers to the total amount of PAR or extended PAR (ePAR) incident on a plane in ..
£649.95
Ex Tax:
Apogee DLI-600 PAR Meter
Apogee's new DLI-600 meter is designed to measure photosynthetically active radiation (PAR) beyond the traditional 400–700 nm range. The DLI-600 measures the newly defined 400-750 nm ePAR radiation range, which has been shown to have extended photosynthetically active properties. In addition to measuring ePAR, the DLI-600 meter calculates daily light integral (DLI) and photoperiod. DLI refers to the total amount of PAR or ePAR incident on a plane in a 24-h..
£682.95
Ex Tax:
Apogee MQ-500: Full-Spectrum Quantum Meter
The MQ-500 quantum meter is the tool of choice for scientists all over the world to accurately measure photosynthetically active radiation from all light sources. It has a hand-held meter, attached via cable, that displays and stores measurements. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design, anodized aluminum body with acrylic diffuser. Typical applications includ..
£649.95
Ex Tax:
Apogee MQ-510 Par Meter
The MQ-510 quantum meter is designed for underwater PAR measurements and already applies the sensor's immersion effect correction factor to the meter readings through firmware. The meter provides excellent measurements under all light sources, including LEDs. The meter consists of a waterproof quantum sensor attached via waterproof cable to a handheld meter. The waterproof sensor incorporates a blue-enhanced silicon photodiode and custom optical filters wi..
£693.95
Ex Tax:
Apogee PQ-622 Package: microCache and ePFD Sensor with 2m Cable
This promotional package includes a SQ-620-SS2 Extended Photon Flux Density (ePFD) sensor (with a 2 meter cable), a microCache Bluetooth micro-logger, an AA-090 protective Neoprene Case, an extra 2545 microCache battery, and an AM-020 Apogee PVC Sensor Platform. The extended 2 meter cable of the SS2 model allows the microCache to be positioned further from the sensor, such as out of the water when used with coral reef tanks or for other applications. When ..
£863.95
Ex Tax:
Control Freak Intelligent Fan Controller Temperature Probe 3m
Replacement probe for the Control Freak fan controller - 3m...
£16.95
Ex Tax:
Elite Temperature Sensor with 10m Cable
The Temperature Sensor is designed for use with a controller, feeding information about the grow area’s environment back to the Controller’s on-board computer. Measures temperature levels in the grow area. Highly accurate, professional grade equipment. Designed for use with a controller. Ten metre long cable. How It Works The temperature sensor gathers information on the temperature of your grow area and feeds it back to the Controller. T..
£8.95
Ex Tax:
Essentials Moisture METER - Digital
The Essentials Moisture METER is a necessity for the perfect grow! It allows you to easily measure the level of moisture in the ANY of the consumables you are drying, indicating whether the dried product is ready for storage. It is ideal for testing herbs that are drying, or plants such as tobacco or tea. Avoid Crop Wastage 9V Battery Included..
£33.95
Ex Tax:
Filter Packs for DXB 50 & DXB 100
DXB 50 & DXB 100 filters should be replaced every 3 months to protect the equipment...
£55.95
Ex Tax:Filter Packs for DXM 50 & DXM 100
DXM 50 & DXM 100 filters should be replaced every 3 months to protect the equipment...
£55.95
Ex Tax:
Float Kit for GAS SonicAir 23L Humidifier
A float value which allows the SonicAir 23L Humidifier to be connected to a reservoir. Removing the need to check and refill the humidifier on a regular basis...
£12.95
Ex Tax:
GAS AC1 Replacement probe
Replacement probe for the AC1 Controller from Global Air Supplies...
£13.95
Ex Tax:
GAS Controller Replacement Probe – Long Length for Pushfit
Please contact our technical department if you need help to determine which type of replacement probe you need...
£51.95
Ex Tax:
GAS Controller Replacement Probe – Long Length for Pushfit – 10m
Please contact our technical department if you need help to determine which type of replacement probe you need...
£50.95
Ex Tax:
GAS Controller Replacement Probe – Long Length with Connector
Please contact our technical department if you need help to determine which type of replacement probe you need...
£51.95
Ex Tax:GAS Controller Replacement Probe – Standard Length for Pushfit - Pack 22
Please contact our technical department if you need help to determine which type of replacement probe you need...
£33.95
Ex Tax:GAS Controller Replacement Probe – Standard Length with Connector
Please contact our technical department if you need help to determine which type of replacement probe you need...
£33.95
Ex Tax:
GAS Day & Night Controller – Replacement Sensor
Replacement sensor for the day & night controller. Please contact our technical department if you need help to determine which type of replacement probe you need...
£26.95
Ex Tax:
GAS Day & Night Temperature Control
For use with your existing heater. Use the dials to set specific temperature for day and night...
£99.95
Ex Tax:
GAS Enviro4 Replacement Probe
A replacement temperature sensor probe for the Enviro4 Fan Controller from Global Air Supplies...
£37.95
Ex Tax:
GAS Hyperfan V2 Extension Cable (Cable Pack 15)
5m extension cable for the Phresh Hyperfan V2...
£16.95
Ex Tax:
GAS Interval Timer
The G.A.S Interval Timer can be used with a pump to deliver small, regular feeds, helping to maximise growth and push your plants to deliver the best possible yield. It features a light sensor and will only operate if light is detected, automating the feeding process whilst still allowing a high level of control. Determine the length of feed from 5 seconds to 10 minutes and set frequency of repetition from 1 hour to 11 hours. Ideal for use with all time..
£109.95
Ex Tax:
GAS Male to Male Cable
Non-Active Male/Male cable that connects an active controller to an EC fan. Has a spanning lenght of 5m...
£12.95
Ex Tax:
GAS Minute-Second Timer
The G.A.S Minute-Second Timer gives an additional level of control, capable of smaller, more frequent feeds. When used with a pump, it can help to maximise growth by automating the delivery of feeds, accurate to the second. This helps the plants to uptake nutrient solution, enhances oxygen absorption and improved yields. Ideal for use with all timed grow systems Range from 5 seconds to 10 minutes Suitable for use with pumps up to a total of 500W max. ..
£83.95
Ex Tax:
GAS Stereo Adapter
Our Stereo Adaptor lets you control your EC Fans (with stereo jack cables) using the G.A.S range of EC controllers. All you have to do to use the Stereo Adaptor is plug in one of our controllers to the top and your stereo jack cables into the sides, this provides a simple and effective fix to connect these products. Compatible with all G.A.S EC controllers Plug and play..
£28.95
Ex Tax:
GAS Stereo Adaptor Twin
Our Twin Stereo Adaptor lets you control both the intake and outtake fans from the intake and outtake of a G.A.S controller. The two way adaptor allows a separate signal to be sent to the intake and outtake allowing for fan balancing. Being able to control fans with our more advanced controllers allows you to control all aspect of your environment from one controller. Compatible with all G.A.S EC controllers Allows the controller to balance fans Plug ..
£34.95
Ex Tax:
GroLab Moisture Sensor
Sensor for measuring Substrate Humidity. This moisture sensor is capable to monitor any substrate's regardless of whether it is soil, rock wool, coconut or a recurrent dipping of roots in water. With a 2 to 10 meters cable you can easily connect this sensor to SoilBot and keep your grow with perfect moisture for your plants avoiding water wasting. Soil Moisture Sensor Interface This sensor is directly compatible with any SoilBot. It can also be..
£24.95
Ex Tax:
GroLab Motion Sensor
Infrared motion detector. With anti-white light function and anti tamper switch system, automatically detects movements on a wide detection area. Connect it to TankBot and create your own security system. Motion Detector Interface This sensor is directly compatible with any TankBot or PowerBot. It can also be used by third party acquisition devices like an Arduino. Specifications: Operating Voltage: 12VDC Operation mode: N.C. (Normaly Closed) Con..
£38.95
Ex Tax:
GroLab PowerBot
A powerful unit capable of monitor and control all the basic elements of your grow. Automate temperature, humidity, air flow, lighting and irrigation and even create safety protocols & procedures for fire or flood detection. Get every variable under your direct control, enabling you to maximize your growth and efficiency. The Complete All In One Power Module PowerBot allows you to connect and control the electrical peripherals of your growing enviro..
£542.95
Ex Tax:
GroLab Smoke Detector
Photoeletric Smoke detector. Capable of detecting white and black smoke and a 360ยบ detection area, this is a high sensitivity sensor that will alert you in case of fire. Connect it to TankBot or PowerBot and create your own security system. Smoke Detector Interface This sensor is directly compatible with any TankBot or PowerBot. It can also be used by third party acquisition devices like an Arduino. Specifications: Operating Voltage: 12VDC Operat..
£40.95
Ex Tax:
Growlink BACnet M12 5Pin Female Terminator, 120Ω Resistor
Elevate your control systems with our M12 5-Pin Female Terminator, designed to optimize signal integrity in your network. Equipped with a 120Ω resistor, it effectively minimizes reflection errors and ensures stable data transmission. Rugged and reliable, it's an essential component for any high-performance automation setup. Recommended for ESM2 Climate Sensor, High-speed data networks, automation control systems, industrial setups...
£46.95
Ex Tax:
Growlink ESM3 Eco Climate Sensor (SDI-12)
The ESM3 Eco climate sensor is designed for Growlink controllers that support SDI-12. This sensor includes air temperature, humidity, VPD and photocell with optional CO2. Support for multiple sensors give you the ability to be averaged or used as seperate sensors. Professional growers can rely on this sensor for accurate data and confidence in their growing environment. Features: RH, T, VPD, Photocell, optional CO2 Temp and pressure compensation w..
£405.95
Ex Tax:
Growlink M12 T-Coupler for ESM2 Climate Sensor
T-coupler, 5-pole male M12 barrel to (2) 5-pole female M12 nuts, parallel distribution...
£37.95
Ex Tax:
Growlink Precision Irrigation Controller (International Version)
Introducing the Smart Irrigation Controller, the perfect solution for precision irrigation management. The controller features a worldwide universal plug, making it compatible with all countries. With 4 x 24VAC output channels for valve control and 4 x substrate sensor inputs, you can easily connect the Growlink Capacitance or Acclima TDR (VWC, EC, Temp) substrate sensors for real-time monitoring and valve control. App Support The IOS and Android app (En..
£744.95
Ex Tax:
Growlink Precision Irrigation Controller with 1 Sensor (International Version)
Introducing the Smart Irrigation Controller, the perfect solution for precision irrigation management. The controller features a worldwide universal plug, making it compatible with all countries. With 4 x 24VAC output channels for valve control and 4 x substrate sensor inputs, you can easily connect the Growlink Capacitance or Acclima TDR (VWC, EC, Temp) substrate sensors for real-time monitoring and valve control. App Support The IOS and Android app (En..
£1,410.95
Ex Tax:
Growlink Precision Irrigation Controller with 2 Sensors (International Version)
Introducing the Smart Irrigation Controller, the perfect solution for precision irrigation management. The controller features a worldwide universal plug, making it compatible with all countries. With 4 x 24VAC output channels for valve control and 4 x substrate sensor inputs, you can easily connect the Growlink Capacitance or Acclima TDR (VWC, EC, Temp) substrate sensors for real-time monitoring and valve control. App Support The IOS and Android app (En..
£1,948.95
Ex Tax:
Growlink Precision Irrigation Controller with 3 Sensors (International Version)
Introducing the Smart Irrigation Controller, the perfect solution for precision irrigation management. The controller features a worldwide universal plug, making it compatible with all countries. With 4 x 24VAC output channels for valve control and 4 x substrate sensor inputs, you can easily connect the Growlink Capacitance or Acclima TDR (VWC, EC, Temp) substrate sensors for real-time monitoring and valve control. App Support The IOS and Android app (En..
£2,482.95
Ex Tax:
Growlink Precision Irrigation Controller with 4 Sensors (International Version)
Introducing the Smart Irrigation Controller, the perfect solution for precision irrigation management. The controller features a worldwide universal plug, making it compatible with all countries. With 4 x 24VAC output channels for valve control and 4 x substrate sensor inputs, you can easily connect the Growlink Capacitance or Acclima TDR (VWC, EC, Temp) substrate sensors for real-time monitoring and valve control. App Support The IOS and Android app (En..
£2,999.95
Ex Tax:
Growlink Teros12 Sensor Adapter Cable 32ft
M8 axial female to pigtail, 4-pole, PVC jacket, black, 32.8ft/10m cable length, IP67...
£55.95
Ex Tax:
Growlink Teros12 Solus Adapter (Pack of 4)
Use your Teros 12 sensors with the Growlink PIC controller. Stop paying high annual subscription fees Use your Teros 12 sensors to directly control irrigation events Works with Growlink Crop Steering program Easy Plug and Play Setup Please note: This product is the adaptor only (Pack of 4)...
£108.95
Ex Tax:
Growlink Terralink Soil Moisture Sensor (VWC, EC, Temp)
Introducing the Terralink Soil Moisture Sensor, featuring the industry-leading capacitance technology. Designed to provide precise and reliable soil moisture data, our sensor helps you optimize your farm's irrigation system and make better-informed decisions for your crops. With the Terralink Soil Moisture Sensor, you can ensure your plants receive the right amount of water at the right time, reducing waste and maximizing yield. Key Features Unparalleled..
£537.95
Ex Tax:
HR-15 & HR-50 Fitting Kit
Fitting kit for the HR-15 and HR-50 humidifiers. Also fits other systems, contact us for details...
£16.95
Ex Tax:
Irrometer LT 300
This precision tensiometer is used by commercial growers and research institutes to accurately measure water tension in potting soil. Stainless Steel Gauge — Accuracy and long life are ensured by a stainless-steel rustproof body and membrane vent for better temperature and elevation related compensation. Quick-Flo” Ceramic Tip — is designed for low tension applications where quick response to soil moisture variations in potting soil / growing media is ..
£132.95
Ex Tax:
Irrometer MLT 120
This precision mini-tensiometer is used by commercial growers and research institutes to accurately measure water tension in potting soil. Stainless Steel Gauge — Accuracy and long life are ensured by a stainless-steel rustproof body and membrane vent for better temperature and elevation related compensation. “Quick-Flo” Ceramic Tip — is designed for low tension applications where quick response to soil moisture variations in potting soil / growing med..
£33.95
Ex Tax:
NIDO 4 Extra Bottles 0.5L
Extra kit of 4 bottles of 500 ml for NIDO ONE, complete with caps and connection valves...
£66.95
Ex Tax:
NIDO Smart Plug
Smart plug for the NIDO Automated Hydroponic system. Easy to configure Communication via Wi-Fi Maximum working distance from NIDO 10 meters Maximum load 2 kilowatts..
£81.95
Ex Tax:
Q-Max / Max Fan Pro EC Link Cable
Used to link two EC fans together from 1 controller...
£9.95
Ex Tax:
Quest 70 Duct Kit
Quest 70 duct kit, 8" (200mm) ducting not included. Dimensions: 32 × 32 × 27cm Weight: 1.3kg..
£87.95
Ex Tax:
SMSCOM 5m Temperature Sensor
The SMSCOM Twin Controller and SPC Temperature Controllers come as standard with a 2 meter temperature sensor. If 2 meters is not long enough and you need a longer probe on your SMSCOM controller then here it is!..
£27.95
Ex Tax:
TOPDON TC004 Handheld Thermal Imaging Camera
The TOPDON TC004 thermal imaging camera offers users a practical solution for various applications, including grow area diagnostics, home maintenance, and more. 1. Standalone Handheld Unit: Unlike some other thermal cameras that require syncing with a smartphone, the TC004 is a standalone handheld unit. It’s easy to operate without the need for additional devices. 2. Temperature Range: The TC004 measures a wide range of temperatures, from -20..
£421.95
Ex Tax:
Trolmaster (4RS-1) Expander Station - Hydro-X
The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3 second time delay between each..
£272.95
Ex Tax:-228x228.jpg "Trolmaster (Delta-1) VFD, Basic Compact Driver for AC motors speed controls - Hydro-X")
Trolmaster (Delta-1) VFD, Basic Compact Driver for AC motors speed controls - Hydro-X
Delta-1 is a customized made variable-frequency drive (VFD) by Delta company. It can be used in the TrolMaster Hydro-X Pro system to control the speed of AC motors (industrial fans etc.). An RJ45 cable is included for connecting with the TrolMaster VFD-1 module. This customized version has had all the parameters preset and ready to be operated with VFD-1 module straight out of the box. Input: Normal Duty: 3PH 380-480V 50/60Hz 11.6A Heavy Duty: 3PH 380..
£1,099.95
Ex Tax:
Trolmaster (DSD-1) Dry Contact Station - Hydro-X / Aqua-X
The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices, call us for more info. The DSD-1 can be configured to work as th..
£101.95
Ex Tax:-240V-Program-Device-Station-228x228.jpg "Trolmaster (DSP-2) 240V Program Device Station - Hydro-X / Aqua-X")
Trolmaster (DSP-2) 240V Program Device Station - Hydro-X / Aqua-X
The TrolMaster DSP-2 program device module (timer module) works like a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 240 volts or less can be controlled by the DSP-2. Features LED Power Indicator RJ12 Cable Socket Addressing Plug & Play Specifications Input Voltage: 100~240 VAC, 50/60Hz Output Current: 10A Output Voltage: 100~2..
£137.95
Ex Tax:
Trolmaster (DSV-1) Low-Volt Station - Hydro-X / Aqua-X
The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module. Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1. This allows the user to directly con..
£150.95
Ex Tax:
Trolmaster (ECS-1) RJ12 Extension Cable Set - Hydro-X
TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable. Contains 1 x Male-to-Male 16ft RJ12 Cable 1 x Male-to-Male 4ft RJ12 Cable 1 x RJ12 T-Splitter..
£35.95
Ex Tax:
Trolmaster (ECS-5) RJ12 to PushLock Converter Cable - Hydro-X
The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable. Contains 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to PushLock Waterproof Connector converter cable 1 x T-shaped Splitter Please note: Lead time 1-2 weeks...
£52.95
Ex Tax:
Trolmaster (ECS-8) 32ft Extension Cable for IR Emitter
The ECS-8 extension cable is simply a 32 ft extension cable to use with the IR emitter in AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1. It has a male and female end and can extend the distance between IR emitter and AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1...
£36.95
Ex Tax:-12ft-RJ12-to-4-pin-IP65-Connector-Cable-228x228.jpg "Trolmaster (ECS-9) 12ft RJ12 to 4-pin IP65 Connector Cable")
Trolmaster (ECS-9) 12ft RJ12 to 4-pin IP65 Connector Cable
The ECS-9 RJ12 to 4pin connector cable is simply a 12 ft cable to use with Lighting Control Adaptor T (LMA-T) and ThinkGrow LEDs with Threaded Waterproof Connectors for interconnecting...
£36.95
Ex Tax:
Trolmaster (MBS-Pro) 4-in-1 Sensor for Hydro-X Pro only
The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only. Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sen..
£727.95
Ex Tax:-3-in-1-Sensor-for-Hydro-X-Only-228x228.jpg "TrolMaster (MBS-TH) 3-in-1 Sensor for Hydro-X Only")
TrolMaster (MBS-TH) 3-in-1 Sensor for Hydro-X Only
3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors" Features: Built-In Photocell Detecting Day/Night Mode Plug & Play Specifications: Output Voltage: 0~11.5V Maximum Current: 0.2A Wor..
£101.95
Ex Tax:-Dry-Contact-Board-for-Hydro-X-Pro-and-Aqua-X-Pro-228x228.jpg "Trolmaster (OM-8) Dry Contact Board for Hydro-X Pro and Aqua-X Pro")
Trolmaster (OM-8) Dry Contact Board for Hydro-X Pro and Aqua-X Pro
The OM-8 dry contact board allows the main controller to control up to 8 individual outputs on it. It is specially designed for the Hydro-X Pro and Aqua-X Pro system. It has 8 individual electrical contacts, and allows up to 12 Amp current through each contact. *The OM-8 should be mounted inside an electric control cabinet, and connected to a power supply between 100-240 VAC. *When used with the Aqua-X Pro system, OM-8 can activate pumps/solenoids at a h..
£511.95
Ex Tax:-228x228.jpg "TrolMaster Grow Camera (TC-1)")
TrolMaster Grow Camera (TC-1)
The TrolMaster Grow Camera (TC-1) is a high-quality surveillance camera specifically designed for grow rooms, providing 24-7 live video monitoring of your grow area. It is specifically designed to work with any of the TrolMaster HCS controllers by "linking" the camera to a HCS controller that is also connected to the app. The TC-1’s built-in night vision has been engineered to use invisible (plant safe) IR illuminators to prevent disrupting the morphology ..
£195.95
Ex Tax:
VitaLink Meter Store 30ml
Prolong the accuracy and lifespan of the pH probe on your pH meter with VitaLink ESSENTIALS Meter Store. pH meters are expensive. They will all degrade over time, but often degrade faster due to a lack of proper maintenance. With VitaLink ESSENTIALS Meter Store, keeping your pH probe in good condition and prolonging its useful lifespan is no longer a problem. The pH probe on your pH meter should always be stored in VitaLink ESSENTIALS Meter Store when not..
£5.95
Ex Tax:
OptiClimate Cable for Remote Control
OptiClimate cable for remote control. This OptiClimate cable for the remote control of the OptiClimate water-cooled air conditioners...
£31.95
Ex Tax:
Opticlimate Plumbing Parts Kit (15mm)
This kit contains 2 x elbow pieces that connect to your Opticlimate and allow the fitting of speedfit pipe. It also contains the fittings for the leak detector shut-off valve. Selected to fit your Opticlimate Fits every size of Opticlimate Allows you to connect to speedfit pipe for easy installation For use with 15mm pipe Kit Contains: 2 x elbow fittings with speedfit connectors (inlet and drain) 2 x coupler fittings for the auto-off valve (wit..
£32.95
Ex Tax:
Trolmaster (MBS-PAR) Full Spectrum Quantum Sensor
PAR Sensor for Your Grow Environment Used in conjunction with Hydro-X the Full Spectrum Quantum Sensor (MBS-PAR) provides accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases the accuracy of LED measurements. Used in conjunction with the Hydro-X controller, the ..
£714.95
Ex Tax:
Trolmaster (BM-1) Weatherproof Box
The BM-1 weatherproof box is designed for the protection for TrolMaster TS-1/2, HS-1 and ARS-1 controllers from dripping water and low-pressure sprayed water. Please note: Controller not included...
£32.95
Ex Tax:
Trolmaster (DCC-1) Dual Condition Adaptor
The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turn on exhaust fans. There are many other examples where two conditions can be either combined or split. The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style module. (DSC-1, DSH-1/2, DST-1/2 and DSP-1). ..
£83.95
Ex Tax:
Rhino EC Fan Control Cable 5m
5m control cable for connecting Rhino EC fans to Rhino EC controllers...
£13.95
Ex Tax:
SMSCom Temp Protector 16A
The SMSCOM Temp Protector provides a failsafe system that protects the room against excessive temperatures. Should the room overheat, the Temp Protector will automatically switch off a number of lights to allow the temperature to drop back to safe levels. After plugging your lighting contactor/relay into the Temp Protector, simply set the maximum temperature cut off point for your room. Should the temperature in your room ever exceed your set point, the u..
£120.95
Ex Tax:
Trolmaster (ECS-2) Hydro-X RJ12 to 3.5 Jack Extension Cable Set
RJ12 to 3.5mm Converter Cable Set is specially designed for Hydro-X Environment Control System. Features: 16ft RJ12 Cable 4ft RJ12 to 3.5mm Jack Cable T-Shape Splitter Package Contents: 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to 3.5 Jack Cable 1 x T-shaped Splitter 1 x 3.5mm Female Barrel Connector..
£25.95
Ex Tax:
Trolmaster (RTU-1) 4G Data Station
Using a cellular SIM card to connect your devices to Internet! Includes: 1 x 4G Data Station 1 x WiFi Antenna 1 X 4G Cellula Antenna 1 x Ethernet Cable 1 x Power Adapter Features: SIM Card Wireless Connectivity WIFI Antenna & 4G Cellular Antenna 5 Ethernet (LAN) Cable Connectors Automatic Repair Function Specifications: Standard Power: DC 12V/1.5A Power Range: DC5-35V Ethernet Port: 5x10/100M LAN (RJ45), Auto MDI/MDIX, 1.5K..
£800.95
Ex Tax:
Par and Spectrometer
Introducing our cutting-edge Par Meter and Spectrometer, a technological marvel crafted for precision and performance. Engineered with a high-speed CPU processor and a high-precision electronic CCD optical sensor, this device operates on the principle of long focal cross asymmetric CT spectroscopy system, delivering unparalleled accuracy and stability. Key Features: 1. Advanced Optical Technology: Optical resolution of 2nm for precise meas..
£39.95
Ex Tax:-228x228.jpg "SmartBee Stinger Smart Plug - 1 Controllable Outlet")
SmartBee Stinger Smart Plug - 1 Controllable Outlet
The SmartBee™ Stinger Smart Plug™ allows for wireless control of anything that can be plugged into an electrical outlet. It is a single receptacle power controller that wirelessly integrates into your system putting the control of any device that is plugged into it right in your hands. The SmartBee™ SmartPlugs and SmartStrip power controllers create a wireless pathway of functionality in your grow room system that can all be controlled from The SmartBee™ H..
£443.95
Ex Tax:
Trolmaster (MBS-SD) Smoke Detector for Hydro-X
Smoke Detector with cable set is specially designed for Hydro-X Control System. Features: Small Button for Address Assignment Built-In Photocell Detecting Day/Night Mode Plug & Play Contents: 1 x Smoke Detector (MBS-SD) 1 x 16ft RJ12 Cable 1 x RJ12 T-Splitter Specifications: Output Voltage: 0~11.5V Maximum Current: 0.2A Working Environment: Temperature 32-122°F, Humidity≤90% Package Dimensions: 160mm(L) x 86mm(W) x 86mm(H) G.W. pe..
£67.95
Ex Tax:
Trolmaster (SPH-1) RJ12 Splitter Hub With Cable Set
The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TRolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors. The SPH..
£50.95
Ex Tax:
Trolmaster (WD-2) Water Detector
Specially designed for the water detection in the Hydro-X Control System. It will provide leaking alarm to prevent water damage. Up to 8 water detectors could be added to Hydro-X System. Contents: 1 x Water Detector 1 x Touch Spot 1 x RJ12 T-splitter 1 x 16ft RJ12 Cable Specifications: Working Environments: Temperature 32-122°F, Humidity≤90% Package Dimensions: 160mm(L) x 86mm(W) x 86mm(H)..
£82.95
Ex Tax:
AlorAir Ozone Detector & Data Logger
This Ozone detector and data logger adopts electrochemical gas sensor, which has excellent sensitivity and excellent repeatability. It can storage 100,000 pieces of testing data, and can view historical data at any time with the software. The product is easy to use and maintain, and it meets the requirements of industrial field safety monitoring for high reliability of the equipment. The shell is made of high-strength engineering plastic and composite anti..
£308.95
Ex Tax:
Hanging System for the Sentinel HD55
Hanging System for the sentinel HD55 – Includes: 4 eyebolts, washers and double nuts, 4 eye-plates, 4 chains, 8 carbine hooks and 2 angles...
£131.95
Ex Tax:
Hanging System for the Sentinel HDi120
Hanging System for the sentinel HDi120 – Includes: 4 eyebolts, washers and double nuts, 4 eye-plates, 4 chains, 8 carbine hooks and 2 angles...
£131.95
Ex Tax:
Hanging System for the Sentinel HDi90
Hanging System for the sentinel HDi90 – Includes: 4 eyebolts, washers and double nuts, 4 eye-plates, 4 chains, 8 carbine hooks and 2 angles...
£131.95
Ex Tax:
Trolmaster (BETA-1) AirCon Digital Day/Night Remote Controller
The Beta-1 is a simple Day/Night Remote Controller for Mini-Split Air Conditioners The Beta-1 uses the remote control that came with your mini split air-conditioner to “learn” how to change the setpoints on the mini-split. Just about any brand of mini-split unit can be controlled by the Beta-1. Once the Beta-1 learns the signals from your remote controller, it will automatically change the setpoint on the mini-split to two separate Day and Night temperatu..
£170.95
Ex Tax:
Wall Hanging Brackets for Sentinel HD55 (2 brackets)
Wall Mounting Brackets for the Sentinel HD55 and HDi90 Units. The arms slide out allowing for the 2 different sized machines to sit on it. Wall being used must be strong enough to support the unit, width between the brackets will vary depending on unit. For the HD55 2 brackets are required while for the HDi90 and Storm LGR we suggest 3 brackets for safety. Ideally set level between the 2 brackets however slight fall towards the sump end may help drainage f..
£54.95
Ex Tax:
Wall Hanging Brackets for Sentinel HD55, HDi90, Storm LGR (3 brackets)
Wall Mounting Brackets for the Sentinel HD55 and HDi90 Units. The arms slide out allowing for the 2 different sized machines to sit on it. Wall being used must be strong enough to support the unit, width between the brackets will vary depending on unit. For the HD55 2 brackets are required while for the HDi90 and Storm LGR we suggest 3 brackets for safety. Ideally set level between the 2 brackets however slight fall towards the sump end may help drainage f..
£80.95
Ex Tax:
Trolmaster (ECS-3) RJ12 to Threaded Waterproof Connector converter cable
The ECS-3 provides a 5/8” diameter connector for some of Fluence brands LED fixtures using Threaded Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / Threaded Waterproof Connector cable. Contains: 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to 3pin IP67 converter cable 1 x T-shaped Splitter..
£25.95
Ex Tax:
PHOTOBIO Advanced Quantum PAR Meter
The Phantom PHOTOBIO Advanced PAR (Photosynthetically Active Radiation) Meter provides accurate measurement of any light source used in horticultural applications. Allowing you to monitor the light across your grow room and adjust your light sources to ensure each plant receives the optimum amount of light. The Meter measures PAR (400-700 nm) withing a range of 0 to 3999 mmol/m2/s. The ideal level for photosynthesis is 1000 mmol/m2/s. Reac..
£274.95
Ex Tax:
Trolmaster (TSH-1) Temperature / Humidity Station 0-10v - Hydro-X
The Trolmaster TSH-1 Temperature / Humidity Station is a 0-10 volt analog output control station that works with the HCS-1 and HCS-2 controllers. The TSH-1 can be configured to control either a temperature or a humidity device that requires a variable 0-10 volt input signal. The TSH-1 is capable of controlling variable speed fans, vents or any other device that accepts a 0-10 volt input. It features separate day and night “idle” speed settings built-into ..
£146.95
Ex Tax:
Air Comfort Soil Quality Sensor Bluetooth
Running from the same app ass the very popular bluetooth air comfort. You can now monitor soil moisture and EC at the same time as temp and humidity...
£92.95
Ex Tax:
Gavita ECM1 External Contactor Module
For our EL2 controllers we developed an External Contactor Module, the ECM1. As the Master Controller works on a low voltage output, it is not capable of switching auxiliary equipment. With the ECM1 you can extend the functionality of your EL2 controller to switch auxiliary equipment, such as heaters, dehumidifiers and CO2 equipment during the lights on or lights off cycle, according to the controller set lighting hours. The Gavita Master controller EL2 h..
£109.95
Ex Tax:
