EC/CF/TDS Monitor & Control
EC/CF/TDS Monitor & Control
Product Compare (0)
3/4" Water Hammer Arrestor Kit
Water hammer arrestor kits are used to prevent the potential damaging effects of water hammer which is defined as a pressure surge or wave caused when a fluid in motion is forced to stop or change directions suddenly. Please note: Parts ordered may look slightly different than the picture displayed, but the fit and function will be the same. Features: 3/4" MPT 6.5" tall Stainless steel water hammer arrestor Nipple Tee Elbo..
£131.95
Ex Tax:
Aqua Master Bundle Pack
Aqua Master Bundle Pack includes: 2 x Aqua Master Combo Pen P100 Pro 2 x Aqua Master Combo Meter P700 Pro 3 x Aqua Master EC1413 Cal Solution – 100ml 3 x Aqua Master pH 4 Cal Solution – 100ml 3 x Aqua Master pH 7 Cal Solution – 100ml 3 x Aqua Master KCL Storage Solution – 100ml..
£605.95
Ex Tax:
Aqua Master H600 Pro Handheld Meter - pH, EC, PPM, TDS
The Handheld Meter H600 Pro is a versatile tool designed for the precise measurement of pH, EC, PPM, TDS, and temperature in liquids. Its user-friendly interface ensures effortless parameter switching, making it accessible to both seasoned professionals and newcomers. One of its key features is the built-in calibration indicator, which acts as a proactive reminder for recalibration, ensuring consistent measurement accuracy. This meter is also designed to ..
£231.95
Ex Tax:
Aqua Master Replacement EC, CF, PPM Electrode for P700 Pro2 Combo Meter
The Aqua master tools replaceable EC, CF, PPM electrode is easy to connect using the connector. The electrode cannot be replaced with most conductivity meters because they generally do not break if properly maintained. However, due to aging, lime scale, leakage in the electrode, or cable breakage due to hardened plastic, the electrode can break. That is why the electrode is replaceable with our meter...
£62.95
Ex Tax:
Aqua Master Replacement pH Electrode S300 Pro 2
This is the replacement probe for the Aqua Master Substrate pH/Temp S300 Pro 2. For instructions on how to replace the electrode, please refer to the user manual: Aqua Master Substrate pH/Temp S300 Pro 2. Replacing the electrode:Detach the PIN connector of the old EC electrode from the meter.Connect the PIN connector of the new EC electrode to the meter.Calibrate the meter as described in this manual.The meter is now ready for use...
£63.95
Ex Tax:
Aqua Master Substrate EC/Temp E300 Pro
The E300 Pro is the ideal meter to measure the EC and temperature of coconut soil and other moist, soft substrates and liquids. The E300 Pro features a modern and robust housing, with easy to operate buttons. It also includes an EC electrode of unprecedented quality. The meter is delivered fully calibrated and includes batteries.How does the meter work?Connect the PIN connector of the electrode to the EC meter.Rinse the electrode with running wat..
£148.95
Ex Tax:
Aqua Master Tools P700 Pro2
The renewed Combo meter P700 Pro2 has a modern, robust housing. It is also equipped with a large screen on which all value can be read. In addition, the software has been improved, so that accurate measurements can now be read faster. The electrodes are easy to replace if worn or broken. The Combo meter P700 Pro2 is ideal for measuring the pH, EC, CF, PPM and temperature of nutrient water for plants and water in swimming pools, jacuzzis and ponds. With th..
£257.95
Ex Tax:
Aqualine EC Stick
The Aqualine EC Stick measures the nutrient strength of a solution. It is essential when growing hydroponics to know what the strength of the solution is before feeding plants and whilst they are growing. The Aqualine EC Stick is the perfect all-around conductivity meter. Its precision components make it super accurate every time it is used. This incredibly accurate meter is fully waterproof and simple to use. Just dip the probe end into the nutrient and..
£84.95
Ex Tax:
Bluelab Combo Meter Plus
Our best-selling meter paired with the Leap pH Probe for quicker measurements in any substrate. Take care of the fundamentals - Three-in-one portable solution The fundamental parameters of pH, conductivity and temperature all play a pivotal role in driving optimal nutrient uptake. With Bluelab’s Combo Meter Plus, you can measure all these fundamentals in one convenient, portable device. While conductivity indicates the total amount of nutrients in your ..
£306.95
Ex Tax:
Budget EC Meter
This easy-to-use EC meter by Grow Gadgets aids the grower by measuring the electrical conductivity in the soil. This commonly used meter monitors the level of nutrients in the soil, allowing the grower to react according to the readings. This allows the grower to fine-tune the strength of their nutrient solution for optimal plant growth. This Budget EC Meter is great value for money...
£16.95
Ex Tax:
Combo Pen P110 Pro ph, EC, Temp
The updated Combo Pen P110 Pro features a modern and robust housing. The improved software now ensures quicker readings of accurate measurements. You can easily replace the electrode should it be worn or damaged. The Combo Pen P110 Pro is ideal for measuring the EC, pH and temperature of liquid plant nutrition and water in swimming pools, Jacuzzis and ponds. The user-friendly buttons can be used to effortlessly switch between..
£85.95
Ex Tax:
E50 Pro EC Electrode AMT1006
Suitable for the EC Temp meter E50 Pro. Please refer to the User Guide for instructions on how to replace the electrode. Waterproof IP67...
£21.95
Ex Tax:
EC 14.13 Calibration Solution 100ml
100 ml EC 14.13 Calibration Solution. Traceable to NIST standard. Close immediately after use. Store between 15-25 °C...
£5.95
Ex Tax:
GroLab Conductivity Probe
Probe for measuring EC of a liquid solution. This conductivity probe comes with an electrode capable of constantly acquires EC values from your solution. With a 2 meters cable and an BNC connector easily connect this probe with TankBot and start getting all the information that you may need from your solution. Specifications: Operating Voltage: 5 VDC Sensor Type: Electrode Cell Constant: 1.0 ± 2 Measuring Range: 0 to 19990 μS/cm Accuracy:..
£93.95
Ex Tax:
GroLab Doser Starter Kit
GroLab™ Doser Kit is a powerful grow controller that allows to fully monitor and automate the feeding solution of your plants. Nutrients control, pH correction, water level warnings, auto tank refill, are some functions of this kit. This kit also provides the necessary tools to create security systems to react and/or notify if any issues arise. Remote control, real-time notifications, IP cameras integration... are just some of the perks you get with GroL..
£878.95
Ex Tax:
GroLab EC Online Probe
Probe for measuring EC of a liquid solution. Accurate and resistant to environment conditions With this probe, the immersion time doesn't affects directly the EC sampling, that way it's possible to let the probe immersed without calibration for a longer period of time. With a 2 meters cable and an BNC connector easily connect this probe with TankBot and start getting all the information that you may need from your solution. Specifications: Operating ..
£319.95
Ex Tax:
GroLab Pro Starter Kit
GroLab™ Pro Kit is the most complete automation kit you'll ever get. It allows to fully monitor and automate the climate, lighting, irrigation, pH correction, nutrients dosing, and all the tank management tasks, while constantly checking your substrate moisture and feeding your plants only when necessary. This kit also provides the necessary tools to create security systems to react and/or notify if any issues arise. Remote control, real-time notificatio..
£1,865.95
Ex Tax:
GroLab TankBot
Indispensable as a nutrients and pH controller, water tank level manager or even a security system. It can control any 12v actuators like water valves or peristaltic pumps, while also analyzing the water solution in your tank thanks to the pH, EC, Temperature and water level sensors. Refill the tank, recycle the water and even automatically control the nutrients and pH. The Powerful Tank Manager TankBot is the most versatile and precise module f..
£548.95
Ex Tax:
Grow Gadget Budget EC Meter
This easy-to-use EC meter by Grow Gadgets aids the grower by measuring the electrical conductivity in the soil. This commonly used meter monitors the level of nutrients in the soil, allowing the grower to react according to the readings. This allows the grower to fine-tune the strength of their nutrient solution for optimal plant growth. This Budget EC Meter is great value for money. ..
£16.95
Ex Tax:
Growlink Batch Tank Module
Introducing the Smart Batch Tank/Runoff Monitor, the ultimate solution for remote management and monitoring of your batch tanks or runoff zones. Equipped with Sensorex EC and pH probes, as well as inputs for level sensors, flow meters, temperature, pH, and EC, this powerful controller allows for accurate measurement and recording of pH and EC readings throughout the growth cycle. Features: Easy Calibration via the Growlink App Plug & Play R..
£1,272.95
Ex Tax:
Hanna Advanced Portable Multiparameter for pH, EC/Turbidity, DO HI-9829-13042
Designed for measuring water quality, this advanced professional multi-parameter measures up to 15 parameters and comes with an impressive range of features. Dissolved Oxygen Turbidity pH EC Fully integrated GPS system 2 year manufacturers' warranty Designed for measuring water quality, this advanced professional multiparameter measures up to 15 parameters and comes with an impressive range of features. These include a fully integrated GPS system..
£7,148.95
Ex Tax:
Hanna Direct Soil Conductivity Kit HI-993310
The HI-993310 has been designed to address the need for fast and accurate conductivity measurements in soil and liquids. It is supplied with two probes: HI-76305 with stainless steel, conical tip for direct soil measurement and HI-76304 for fertiliser enriched solutions. The HI-993310 measures soil conductivity in EC (mS/cm) as well as salt activity (g/L). The different scales can be selected through two keys on the front panel and two LEDs indicate which..
£1,013.95
Ex Tax:
Hanna EC and Resistivity Meter HI-87314
The HI-87314 is a combination, portable meter that can read conductivity in four different ranges and resistivity. For conductivity measurements, a one-point calibration is performed via a trimmer located in the battery compartment. The supplied probe does not require recalibration when switching from one range to another. The four-ring (stainless steel) probe has a built-in temperature sensor that automatically compensates for temperature changes. For ..
£839.95
Ex Tax:
Hanna EC Pronto 9.99 MS/CM HI-983307
The HI-983307-02 conductivity meter is Hanna's reply to requests for accurate, affordable process monitoring with low maintenance. This meter is supplied with a direct 2-pin probe and 2m cable with a ½ inch thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C. In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. ..
£155.95
Ex Tax:
Hanna EC, TDS and Temperature Tester, Low Range HI-98311
The DiST's ease of use, in combination with its affordability, makes it the must-have equipment for EC and TDS measurement. PPM. With an impressive range of features, the HI-98311 pocket tester is unmatched in the marketplace for EC/TDS and temperature measurement. Designed for ease of use with a floating, waterproof case and offer the following features: Measurement of conductivity (EC) and total dissolved solids (TDS) Automatic calibration and tempera..
£203.95
Ex Tax:
Hanna EC/TDS/Temperature Meter - High Range HI-99301
The new and improved HI-99301. With it's larger user friendly LCD, tutorial messages for calibration and setup, missing probe indicator, newer rugged ergonomic casing, faster and easier battery replacement and probe situated on the bottom of the instrument for ease ot use, the updated model is much more effiecent. The HI-99301 is a portable, EC/TDS/temperature meter that measures high range conductivity in mS/cm and TDS in ppt. Both instruments are housed..
£367.95
Ex Tax:
Hanna Groline Nutrient Dosing System HI-981413-00
HI-981413-00 GroLine EC/TDS/Temp Nutrient dosing system with HI-30033 conductivity probe The HI-981413 uses an amperometric conductivity sensor for measuring the amount of fertiliser in the solution. The meter can be programmed to display results as EC (electrical conductivity) or as TDS (total dissolved solids). The EC results are displayed as mS/cm while TDS is displayed as ppm with a selectable conversion factor from 0.45 to 0.99. The HI-981413 was de..
£447.95
Ex Tax:
Hanna Groline Nutrient Dosing System HI-981413-10
The HI-981413 uses an amperometric conductivity sensor for measuring the amount of fertiliser in the solution. The meter can be programmed to display results as EC (electrical conductivity) or as TDS (total dissolved solids). The EC results are displayed as mS/cm while TDS is displayed as ppm with a selectable conversion factor from 0.45 to 0.99. The HI-981413 was developed to be an inexpensive solution for the horticulturist to maintain the ideal fertili..
£599.95
Ex Tax:
Hanna Groline Nutrient Dosing System HI-981413-20
The HI-981413 uses an amperometric conductivity sensor for measuring the amount of fertiliser in the solution. The meter can be programmed to display results as EC (electrical conductivity) or as TDS (total dissolved solids). The EC results are displayed as mS/cm while TDS is displayed as ppm with a selectable conversion factor from 0.45 to 0.99. The HI-981413 was developed to be an inexpensive solution for the horticulturist to maintain the ideal fertili..
£751.95
Ex Tax:
Hanna Groline PH/EC/TDS/Temp Monitor
Quick to setup and simple to use, this monitor was designed with hydroponics, aquaponics, and greenhouses in mind. Make your nutrient solution easy to manage with the Groline monitor and combined pH/EC/temperature probe. Instantly view all measurements The versatile display of the Groline monitor allows for three screen modes. The LCD can display all three essential hydroponic nutrients measurements at one time, a 3-second cycle of single measurements, ..
£599.95
Ex Tax:
Hanna Groline Soil EC Tester HI-98331
The HI-98331 Soil Test™ is a pocket tester specifically designed to directly measure soil conductivity and temperature. With a temperature sensor in the penetration probe, measurements are automatically temperature compensated. The conductivity range can be calibrated at one point and is designed to be performed in a standardised solution. Key features Replaceable 114 mm stainless steel penetration probe Automatic Temperature Compensation Lightweigh..
£146.95
Ex Tax:-228x228.jpg "Hanna HI-7609829/4 Probe for pH/pH+ORP/ISE, DO, EC, Temp with HI 7698295 SPS")
Hanna HI-7609829/4 Probe for pH/pH+ORP/ISE, DO, EC, Temp with HI 7698295 SPS
Probe for pH/pH+ORP/ISE, DO, EC, temperature with HI-7698295 Short Protective Shield and 4m cable. The use of Hanna’s microprocessor-based multiparameter intelligent probes with HI-9829 will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and manmade pollution to effectively evaluate applications for waste discharge permits, remediate contamin..
£1,865.95
Ex Tax:
Hanna HI-7629829/4 Logging Probe for pH/pH+ORP/ISE, DO, EC, Temp with HI-7698295 SPS
The HI-7629829 is a multi-parameter pH/ISE/EC/DO/Turbidity/Temperature autonomously logging probe for use with the HI-9829 portable meter. Sensors are automatically recognised by the probe and meter when connected. Logging probe for pH/ISE/EC/DO/Turbidity/Temperature with HI-7698295 short protective shield and 4m cable. For use with the HI 9829 multiparameter. Sensor replacement is quick and easy with field replaceable, screw type connectors colour-code..
£4,588.95
Ex Tax:
Hanna HI-769828/10 Replacement DO/EC/Temperature Probe for HI-9828
The HI-769828/10 is a spare dissolved oxygen, conductivity and temperature probe for the HI-9828 with a 10m cable. ..
£2,472.95
Ex Tax:
Hanna HI-769828/20 Replacement DO/EC/°C Probe for HI-9828 with 20m Cable
The HI-769828/20 is a spare dissolved oxygen, conductivity and temperature probe for the HI-9828 with a 20m cable. Sensor replacement is quick and easy with field replaceable, screw type connectors that are colour-coded for easy sensor identification. The probe features a multi-strand-multi-conductor shielded cable with 4m, 10m, and 20m lengths available. Its rugged, waterproof design makes it ideal for field use. IP68 - Dust-tight and protected against ..
£2,644.95
Ex Tax:
Hanna HI-769828/4 Spare DO/EC/T Probe for HI-9828 with 4m Cable
The HI-769828/4 is a spare dissolved oxygen, conductivity and temperature probe for the HI-9828 with a 4m cable. The probe features a multi-strand, multi-conductor shielded cable with 4m, 10m, and 20m lengths available. Its rugged, waterproof design makes it ideal for field use. IP68 - Dust-tight and protected against the effects of continuous immersion in water beyond 1m...
£2,241.95
Ex Tax:
Hanna HI-9811-51 pH/EC/TDS Meter with HI-1285-51
These meters feature a large LCD which displays either pH, EC, TDS or temperature readings along with tutorial instructions. The pH readings are displayed with a 0.1 resolution and an accuracy of ±0.1 pH while the EC and TDS readings are displayed with a 10 m/s/cm and 10 ppm (mg/L) resolution and 2% full scale accuracy. Please select the meter with the range you require for your testing. The temperature correction coefficient (β) is fixed at 2%/°C and all..
£380.95
Ex Tax:
Hanna High Range EC, TDS, pH and °C Meter HI-991301
The HI-991301 high range meter offers great precision at high range to meet exacting requirements for testing pH, electro-conductivity, total dissolved solids and temperature. Designed for optimum consistency and reproducibility the HI-991301 portable high range conductivity meter offers a great range of user selectable features to deliver greater consistency and reproducibility Different TDS factors ranging from 0.45 to 1.00 Temperature coefficients (ß)..
£965.95
Ex Tax:-228x228.jpg "Hanna Logging probe for pH/pH+ORP/ISE, DO, EC, with Temp HI-7629829/10")
Hanna Logging probe for pH/pH+ORP/ISE, DO, EC, with Temp HI-7629829/10
Logging probe for pH/pH+ORP/ISE, DO, EC, temperature with HI-7698295 short protective shield and 10m cable. For use with the HI-9829 multi-parameter meter. The HI-7629829 is a multiparameter pH/ISE/EC/DO/Turbidity/Temperature autonomously logging probe for use with the HI-9829 portable meter. Sensors are automatically recognised by the probe and meter when connected. Sensor replacement is quick and easy with field replaceable, screw type connectors that a..
£4,873.95
Ex Tax:
Hanna Multi-range Conductivity Meter HI-8633
This portable meter is supplied complete with a rugged conductivity probe and is programmed with 4 ranges of conductivity to meet all applications. Temperature compensation is manually set via a rotary knob on the front of the meter. The HI-8633 is a conductivity meter that has been designed for use in areas of production and quality control. This meter utilises four ring potentiometric probes that offer greater versatility over typical amperometric desi..
£735.95
Ex Tax:
Hanna Multi-range TDS Meter HI-8734
This portable total dissolved solids (TDS) meter offers 3 measurement ranges to suit a wide range of applications and is supplied complete with a robust probe on a 1m long cable. The effects of temperature can be manually compensated for via a rotary knob on the front of the meter. The HI-8734 has not only been specifically designed for the water condition industry, but particularly in the softening, demineralisation, reverse osmosis and drinking water ap..
£770.95
Ex Tax:
Hanna Multiparameter EC/TDS/°C/NaCl HI-9835
The HI-9835 combines the four important parameters needed to measure conductivity in one high precision multiparameter instrument. Designed to allow simultaneous sampling of electro conductivity (EC), total dissolved solids (TDS) sodium chloride (NaCl) and temperature, this is a great portable meter for measuring conductivity in testing or pressured environments. Key features Choose between automatic and manual temperature compensations to matc..
£1,368.95
Ex Tax:
Hanna pH, EC, DO digital portable meter (pH electrode included only) HI-98199
The HI-98199 is a versatile meter that can monitor pH, EC, and dissolved oxygen when paired with the respective probe. Hanna’s pH probe is included with the HI-98199 and the EC and DO probes can be ordered separately. Dissolved Oxygen pH The HI-98199 allows for the measurement of pH and temperature when used with the included HI-829113 digital pH probe. Up to a three-point calibration with five standard buffers and one custom buffer available pH ..
£1,093.95
Ex Tax:
Hanna pH/EC/TDS and Temperature Portable Meter with CAL Check HI-9813-61
This meter features a large LCD which displays either pH, EC, TDS or temperature readings along with tutorial instructions. The pH readings are displayed with a 0.1 resolution and an accuracy of ±0.1 pH while the EC and TDS readings are displayed with a 0.01 mS/cm and 1ppm (mg/L) resolution and 2% full scale accuracy. The EC range of both meters is from 0.00 to 4.00 mS/cm and TDS is from 0 to 1999ppm. The temperature correction coefficient (β) is fixed at ..
£324.95
Ex Tax:
Hanna Pocket Conductivity Tester (0 to 2000MS/cm) HI-98303
This pocket sized conductivity tester has a range of 0 to 1999uS/cm with 1uS/cm resolution. The HI-98303 is a rugged and reliable pocket-sized tester that offers quick and accurate readings of conductivity and ideal for testing in the field and the laboratory. This tester features an amperometric graphite electrode that provides better repeatability in measurements since it does not oxidise. The HI-98303's non-oxidising graphite pins are able to provide ..
£104.95
Ex Tax:
Hanna Pocket TDS Tester (0 To 2000MG/L) HI-98301
This pocket sized total dissolved solids (TDS) tester has a range of 0 to 1999ppm (mg/L) and a resolution of 1ppm (1 mg/L). The HI-98301 is a rugged and reliable pocket-sized tester that offers quick and accurate readings of TDS and is ideal for testing in the field and the laboratory. Waterproof Automatic temperature Compensation (ATC) Measurement stability indicator Temperature measurement This tester features an amperometric graphite electrode ..
£97.95
Ex Tax:
Hanna Pocket TDS Tester (0.00 to 10.00ppt) HI-98302
The HI-98302 is a rugged and reliable pocket-sized tester that offers quick and accurate readings of TDS and ideal for testing in the field and the laboratory. Waterproof Automatic temperature Compensation (ATC) Measurement stability indicator Temperature measurement This tester features an amperometric graphite electrode that provides better repeatability in measurements since it does not oxidise. The HI-98302's non-oxidising graphite pins..
£97.95
Ex Tax:
Hanna PRIMO3 Pocket TDS/Temperature Tester (0 to 1999ppm)
The pocket sized PRIMO3 tester provides a fast and dependable way to measure the total dissolved solids in water samples. The PRIMO3 is ideally suited to the rigorous demands of water quality professionals who will appreciate the practicality of the clear, easy to read LCD for demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or..
£128.95
Ex Tax:
Hanna Professional Waterproof EC/TDS/Resistivity/Salinity Meter HI-98192
The HI-98192 is a waterproof, portable conductivity meter that has an expanded conductivity range from 0.000µS/cm to 400 mS/cm, as well as TDS, resistivity and three salinity scales. This meter automatically recognises the probe type (two or four ring) and allows the user to adjust the nominal cell constant. HI-98192 is also ready to perform all three stages USP <645> method required for EC measurement of ultrapure water. Choose from seven memorised..
£1,192.95
Ex Tax:
Hanna Professional Waterproof Meter for Ultrapure Water HI-98197
The HI-98197 is a waterproof, portable EC (conductivity) meter that has an expanded conductivity range from 0.000 µS/cm to 400 mS/cm, as well as TDS (Total Dissolved Solids), resistivity, and three salinity scales. Conductivity & TDS Salinity Resistivity This meter offers a quick connect four-ring probe and allows the user to adjust the nominal cell constant, HI-98197 is also ready to perform all three stages of USP <645> method required f..
£2,302.95
Ex Tax:
Hanna Research Grade pH, ORP, ISE, EC, TDS, Resistivity, Salinity Bench Meter HI-5522
Up to four conductivity calibration points can be used to increase measurement accuracy: One fixed-point salinity calibration on the percent scale Three methods for calculating seawater Practical scale Natural seawater scale Percent scale HI-5522 is an ideal research-grade instrument with large easy read graphic display and soft touch keypad. Customise to your application The display is customisable and can display two channels simultaneously. M..
£1,558.95
Ex Tax:
Hanna Waterproof pH, EC, TDS and Temperature Meter with Advanced Features HI-991300
The HI-991300 is a light weight, portable pH, conductivity and temperature meter for portable applications requiring both a pH and conductivity measurement. Applications include measurements for greenhouses irrigation, hydroponics and groundwater monitoring from agriculture nutrient pollution. The HI-991300 meter features two operation button and is simple to use. All operations and settings, including calibration buffers and temperature scale selections,..
£1,006.95
Ex Tax:
Hub Reservoir Kit
Reservoir Kit (Hub Base + pH/EC/W.Temp probes) Everything you need for 24/7 continuous monitoring of pH, EC and temperature in reservoirs. Expandable up to 12 Hub-ready sensors. This kit includes: 1x Hub Base1x PH-1 Probe: pH (15ft cable)1x EC-1 Probe: EC + water temp (15ft cable)1x Backbone Extension Cable (6ft/2m) 1x 3-way T Connector..
£998.95
Ex Tax:
Lo-Flo 3/4" DAB Starter Kit - Water-Powered Nutrient Delivery System
This Water-Powered Nutrient Delivery System DAB Starter Kit includes all the parts you need for the inlet of your Nutrient Delivery System, and is used in in conjunction with DAB Pumps, or pumps with VFD Control. The Nutrient Delivery System DAB Starter Kit does not include a pressure regulator – for systems with inconsistent or high pressure situations, the Standard Starter Kit should be used. To Complete the LO-FLO Nutrient Delivery System, you will a..
£395.95
Ex Tax:
Lo-Flo 3/4" Mixing Chamber Kit - Water-Powered Nutrient Delivery System
Water-Powered Nutrient Delivery System Mixing Chamber Kit enhances the blending as the solution passes through. It's a must for silicates. To complete the LO-FLO system, you will also need Dosatron Injectors, the DAB Starter Kit or Standard Starter Kit, Monitor Kit or END Kit, and Water Hammer Arrestor Kit. Features: Union Mixing chamber Nipples Seal thread tape Please note: Parts ordered may look slightly different than the pictu..
£153.95
Ex Tax:
Lo-Flo 3/4" Monitor Kit - Water-Powered Nutrient Delivery System
This Water-Powered Nutrient Delivery System Monitor Kit measures and displays the well-blended outgoing solution providing peace of mind. To complete the LO-FLO Nutrient Delivery System, you will also need Dosatron Injectors, the DAB Starter Kit or Standard Starter Kit, Mixing Chamber Kit(s), and the Water Hammer Arrestor Kit. Features: Union Close nipples Nipples Tee Pressure gauge tee Pressure gauge Cross Che..
£461.95
Ex Tax:
Lo-Flo Standard 3/4" Starter Kit - Water-Powered Nutrient Delivery System
This Water-Powered Standard Starter Kit includes all the parts you need for the inlet of your Nutrient Delivery System and is mainly used for high pressure situations. For systems using DAB Pumps or pumps with VFD Control, the HYKSTART-DAB can be used. To complete the LO-FLO System, you will also need Dosatron Injectors, Mixing Chamber Kit(s), the pH/EC Monitor Kit or END Kit, and the Water Hammer Arrestor Kit. Features: Union Check..
£516.95
Ex Tax:
Milwaukee C66
The C66 is a conductivity IP67 waterproof tester, specifically designed for the hydroponics and Agricultural markets, with automatic temperature compensation and 1 point manual calibration. The tester has a range of 0.00 to 10.00 mS/cm. The C66 has a replaceable electrode and is supplied in a casing with calibration solution sachets (M10031) and screwdriver for calibration. The modular design allows easy electrode and battery replacement. Specifi..
£39.95
Ex Tax:
Milwaukee CD611 EC Tester Pen
Digital - Simple - Compact The Milwaukee Conductivity Pen is designed for hydroponic and other growers to help you make sure that your plants are receiving the right amount of nutrient. Keep EC in your target range to help your achieve better results. Features Measures conductivity and temperature with automatic temperature compensation Ideal range for hydroponics (0 to 20,000 µS/cm) Units in µS/cm easily convertable to ppm Factory calibr..
£36.95
Ex Tax:
Milwaukee Mi5166 Waterproof Test Kit
The Milwaukee PH51 + C66 kit allows you to test both electrical conductivity and water acidity. the kit is sold with a case to protect the instruments, the practical screwdriver to set the calibration and the tester bags for the initial calibration. Milwaukee once produced the article always calibrates its products before sale, (you will always find a leaflet with the initial calibration date), later if you want to calibrate your testers just put the prob..
£87.95
Ex Tax:
Milwaukee Mi6000 pH & EC Tester Kit
The Milwaukee Mi6000 is a complete pH and Ec pocket tester set consisting of the PH600 pH tester and the CD611. The kit is a complete pH and Ec pocket EC tester. The pH and EC set is supplied in a very solid hard shell plastic storage case...
£71.95
Ex Tax:
Milwaukee MW804 MAX Waterproof 4-in-1 pH / EC / TDS / Temp
The Milwaukee MW804 MAX Waterproof 4-in-1 pH/EC/TDS/Temp Tester is designed as an all-in-one solution for growers. Accuracy The MW804 MAX 4-in-1 tester is accurate to ±0.05 pH, EC/TDS to 2% Full Scale and ±0.5°C / ±1°F for temperature. With automatic calibration and 5 memorized calibration points, the tester can be quickly and easily be calibrated to a higher accuracy compared with manual calibration. Long life The tester comes with a replaceable pH p..
£182.95
Ex Tax:
Milwaukee Nutrient Stick
The Milwaukee EC/TDS Nutrient Meter is designed for Hydroponics, horticulture and agriculture to help you make sure that your vegetables and plants are receiving the right amount of nutrient to promote healthy growth with low to zero product waste. Keep EC/TDS in your target range to help your achieve better results. Design Features Measures conductivity (EC) and total dissolved solids (TDS) with automatic temperature compensation. Ideal range for Hyd..
£93.95
Ex Tax:
Milwaukee PH/EC Temp Monitor w/ Manual Calibration
Why Guard when you can Monitor! The Milwaukee MC810 MAX pH/EC/Temp. Monitor lets you monitor your pH/TDS/Temp levels 24/7 automatically. Comments From Field Testing “I run this unit 24/7 and have not had any problems for the past two months. I can monitor 24/7, point a camera on it and connect to my phone.” “Easy to calibrate.” “Using this now, far less expensive than what my friends paid … I recommend this to any serious grower.” Summary The MC811 ..
£248.95
Ex Tax:
Milwaukee Smart Portable EC HR Meter with ATC
MW302 is a Portable Conductivity High Range (EC) Meter with Automatic Temperature Compensation. This instrument has been designed to meet the Grower’s need for equipment suited to the aggressive environments found in agricultural and hydroponics applications. It is also a great meter for food, labs, and water treatment applications. EC testing provides a method to optimize chemical applications and minimize operational cost. In agricultural applicat..
£131.95
Ex Tax:
Milwaukee Smart Portable pH Meter
The Milwaukee MW100 PRO pH meter features manual calibration and fast operation in a rugged design. The Milwaukee MW100 PRO pH Meter is ideal for users in pools, and hydroponic applications. This meter is also ideal for educators that want their students to learn the basics of pH meter calibration before going fully automatic. Speed The MW100 delivers fast results to ±0.2 pH accuracy with two-point, manual calibration. Toughness This rugged m..
£127.95
Ex Tax:
NIDO One - Hydroponic Automation
Nido is the first intelligent and connected device for the management and monitoring of off-ground systems. Installable in a few minutes, it can automate your greenhouse in just a few simple steps via smartphone/tablet control. All values in a single platform Data monitoring, value management and device control via smartphones will allow you to create an ideal environment for the growth of healthy and extremely productive plants. Compatible with any exi..
£2,199.95
Ex Tax:
Nutrient Injector D07RE125VF
The standard dosing range D07 meets the dosing requirements for flow rates from 5 to 700 l/h. Proportional dosing and without electricity Proportionality dependent on water flow Compact ergonomics Outlet injection Specifications: Injection range 0,15 - 1,25 % [1:666 - 1:80] Water flow range 5 l/h - 0,7 m3/h Operating water pressure 0,3 - 6 bar Concentrated additive injection 0,0075 l/h - 8.75 l/h Stroke volume ~ 0,225 l Con..
£435.95
Ex Tax:
Nutrient Injector D07RE5VF
The standard dosing range D07 meets the dosing requirements for flow rates from 5 to 700 l/h. Proportional dosing and without electricity Proportionality dependent on water flow Compact ergonomics Outlet injection Specifications: Injection range 0,8 - 5,5% [1:128 - 1:18] Water flow range 5 l/h - 0,7 m3/h Operating water pressure 0,3 - 6 bar Concentrated additive injection 0,8 l/h - 38,5 l/h Stroke volume ~ 0,225 l Connectio..
£494.95
Ex Tax:
Nutrient Injector D20GLVF
The D20 GL range meets treatment needs from 1 to 20 m3. Proportional dosing and without electricity Proportional dosing dependent on water flow Specifications: Injection range 0,2 - 2 % [1:500 - 1:50] Water flow range 1 - 20 m3/h Operating water pressure 0,12 - 10 bar Concentrated additive injection 2 - 400 l/h Stroke volume ~ 5 l Connections Compression fittings Ø 63mm PE Hose PVC Ø 16x22mm - Lg 1,80m..
£2,276.95
Ex Tax:
Nutrient Injector D20GLVF
Installed on the water network, the DOSATRON uses water pressure as the only driving force. When activated, it sucks in the concentrated product, doses it to the desired percentage, then mixes it with the driving water. The solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through the DOSATRON, regardless of variations in flow rate or system pressure. Externally adjustable proportional d..
£2,276.95
Ex Tax:
Nutrient Injector D3GL2VF
The fertilization reference More efficient An optimized design Really adapted to the evolution of practices and treatments Highly ergonomic adjustment Specifications: Injection range 0,2 - 2 % [1:500 - 1:50] Water flow range 10 l/h - 3 m3/h Operating water pressure 0,3 – 6 bar Concentrated additive injection 0,02 l/h – 60 l/h Stroke volume ~ 0,53 l Connections NPT-BSP Ø 20x27 - 3/4"M Hose PVC Ø 8x12 - Lg 1,75m..
£549.95
Ex Tax:
Nutrient Injector D3GL3000VF
The fertilization reference More efficient An optimized design Really adapted to the evolution of practices and treatments Highly ergonomic adjustment Specifications: Injection range 0,03 - 0,3 % 1:3000 - 1:333] Water flow range 10 l/h - 3 m3/h Operating water pressure 0,3 - 6 bar Concentrated additive injection 0,003 l/h - 9 l/h Stroke volume ~ 0,53 l Connections NTP-BSP 3/4'' M Ø 20x27mm Hose PE Ø 4x6 - Lg 1,75m..
£740.95
Ex Tax:
Nutrient Injector D45RE1.5VF
Installed on the water network, the DOSATRON uses water pressure as the only driving force. When activated, it sucks in the concentrated product, doses it to the desired percentage, then mixes it with the driving water. The solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through the DOSATRON, regardless of variations in flow rate or system pressure. Externally adjustable proportional d..
£758.95
Ex Tax:
Nutrient Injector D45RE3VF
Installed on the water network, the DOSATRON uses water pressure as the only driving force. When activated, it sucks in the concentrated product, doses it to the desired percentage, then mixes it with the driving water. The solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through the DOSATRON, regardless of variations in flow rate or system pressure. Externally adjustable proportional d..
£808.95
Ex Tax:
Nutrient Injector D45RE8
Installed on the water network, the DOSATRON uses water pressure as the only driving force. When activated, it sucks in the concentrated product, doses it to the desired percentage, then mixes it with the driving water. The solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through the DOSATRON, regardless of variations in flow rate or system pressure. Externally adjustable proportional d..
£912.95
Ex Tax:
Nutrient Injector D8RE5VF
Installed on the water network, the DOSATRON uses water pressure as the only driving force. When activated, it sucks in the concentrated product, doses it to the desired percentage, then mixes it with the driving water. The solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through the DOSATRON, regardless of variations in flow rate or system pressure. Externally adjustable proportional d..
£1,352.95
Ex Tax:
Nutrient Injector D9GL2VF
The fertigation reference Ideal in harsh hydraulic conditions Convenient maintenance Optimized chemical resistance Enhanced reliability thanks to an extremely optimized design Specifications: Injection range 0,2 - 2% [1:500 - 1:50] Water flow range 500 l/h - 9 m3/h Operating water pressure 0,3 - 8 bar Concentrated additive injection 1 - 180 l/h Stroke volume ~ 1,7 l Connections NPT-BSP 1''1/2 M Ø 40x49mm Hose PVC Ø 16x22m..
£1,160.95
Ex Tax:
Nutrient Injector D9GL2VF
More reliable, more resistant to chemicals, very easy to maintain without tools... DOSATRON® presents the new special fertigation dosing pump, the latest addition to the Green Line dedicated to irrigation systems. It operates on irrigation networks from 500 l/h to 9 m3/h. Fertilizers and products, liquid or soluble, conventional or organic, are injected over a dosage range of 0.2% to 2% and 1% to 5%. The fertigation reference Ideal in..
£1,543.95
Ex Tax:
pH EC TDS Temperature Portable Meter HI-9812-51
These meters feature a large LCD which displays either pH, EC, TDS or temperature readings along with tutorial instructions. The pH readings are displayed with a 0.1 resolution and an accuracy of ±0.1 pH while the EC and TDS readings are displayed with a 10 m/s/cm and 10 ppm (mg/L) resolution and 2% full scale accuracy. Please select the meter with the range you require for your testing. The temperature correction coefficient (β) is fixed at 2%/°C and all..
£367.95
Ex Tax:
pH/EC/TDS and temperature Portable Meter HI-9813-51
This meter features a large LCD which displays either pH, EC, TDS or temperature readings along with tutorial instructions. The pH readings are displayed with a 0.1 resolution and an accuracy of ±0.1 pH while the EC and TDS readings are displayed with a 0.01 mS/cm and 1ppm (mg/L) resolution and 2% full scale accuracy. The EC range of both meters is from 0.00 to 4.00 mS/cm and TDS is from 0 to 1999ppm. The temperature correction coefficient (β) is fixed a..
£367.95
Ex Tax:
Pulse Hub Base
Professional-grade environmental monitoring made easy. Pulse Hub supports a versatile suite of industrial-grade sensors that provide you with the data needed to optimize growth conditions and give you a full understanding of every aspect of your grow...
£561.95
Ex Tax:
Research Grade EC/TDS Meter with USP HI-5321
HI-5321 can be used to perform all 3 stages of USP method required for conductivity measurement of pure and ultra-pure water. HI-5321 can be used to perform all 3 stages of USP <645> method required for conductivity measurement of pure and ultra-pure water. The instrument provides clear directions on how to perform each testing stage and automatically monitors the temperature, conductivity and stability during testing and determines whether a sample..
£1,338.95
Ex Tax:0-228x228.jpg "Trolmaster (PCT-3) Drop-in/inline Heavy Duty Nutrient EC/Temp Sensor")
Trolmaster (PCT-3) Drop-in/inline Heavy Duty Nutrient EC/Temp Sensor
TrolMaster's new PCT-3 EC & temperature probe has been improved in several ways. The new PCT-3 features a reduced diameter protective sleeve and threaded body that will allow the probe to be installed into standard 3/4" PVC tee fittings. The PCT-3 also has an improved sensor element for more stable and reliable performance and we have reduced the length of the probe to fit into tight spaces. Can be used with the AMP-2 or the AMP-3 nutrient sensor modul..
£392.95
Ex Tax:
Trolmaster (WCS-1) Water Content Sensor - Aqua-X
The WCS-1 water content sensor allows the user to monitor the % of water / nutrients within the growing medium. The moisture level / water content is displayed in real-time on the WCS module itself, the Aqua-x and the APP. That data is displayed on a graph (through the APP) and helps the user visualize the dry-down time, and to make adjustments to their irrigation timers / irrigation cycles. Up to 8 WCS-1 can be connected to a single Aqua-x. When multiple..
£322.95
Ex Tax:
Trolmaster (WCS-2) 3-in-1 Water Content Sensor
Monitoring your grow medium for proper water content % and EC is an important factor in high-yield growing applications. TrolMaster understands that today's method of "crop steering" involves more precise control of the amount of nutrient and the nutrient strength within the grow medium in order to achieve the best results. The WCS-2 Water Content Sensor provides the users with an accurate and simple way to monitor your grow medium. The WCS-2 consists of a..
£461.95
Ex Tax:
Veg+Bloom Dosatron
Provide increased quality, along with making the process of blending and dispensing nutrients easier and more accurate. The Nutrient Delivery System is a simplistic system made up of four main panel sections which can be arranged to accommodate a wide variety of fertigation programs. With total control in mind, customizing the entire panel is easy based on your personal nutrient program! The Nutrient Delivery System thrives anywhere, from greenhouse envir..
£869.95
Ex Tax:
Hanna Groline Waterproof EC/TDS/Temperature Tester HI-98318
The HI-98318 is our latest pocket meter for measuring the EC/TDS of a hydroponic nutrient solution. The ergonomic design allows this tester to fit comfortably in your hand. The large easy to read LCD display shows both EC or TDS and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one point calibration. The GroLine Waterpr..
£93.95
Ex Tax:
Bluelab Pro Controller Connect
Automated Constant Control of Reservoir pH and Nutrient Levels When connected to a dosing system the Bluelab Pro Controller Connect manages pH, conductivity and temperature levels in reservoirs. As your plants feed, pH and nutrients are automatically adjusted to the desired range. The controller allows you to monitor, data log and control your system in real time for immediate response to personalised settings and system alerts, direct from your compute..
£1,099.95
Ex Tax:
CCH2O X Growlink Nutrient Dosing System
The CCH2O X Growlink Nutrient Dosing System Makes Dosing Easy as 1, 2, 3 1. Install with Under Current® System or Reservoir 2. Add Cultured Solutions® 3. Download App & Connect to Tablet or Smartphone Monitor & Dosing – pH PPM DO Temp Smart Water Wireless Nutrient Controller pH, EC/PPM, DO & Temp Probes 2x Tank Level Switches 5x Remote Dosing Pumps (80L/min) Nutrient Injection & Probe Manifol..
£130.95
Ex Tax:
Bluelab OnePen pH, Conductivity (EC/PPM), and Temperature
This 3-in-1 tool measures pH, Conductivity (EC/PPM), and Temperature, optimising nutrient uptake. Connect to the Edenic app via Bluetooth for real-time sharing, updates, and comprehensive data management. Replaceable probe and probe health indicatorErgonomic build and high-contrast backlit displayPrecise readings with 0.01 pH resolutionSimultaneous pH and conductivity (EC) screen readingsMeasure conductivity in EC, CF, PPM 500 (TDS) or PPM 700Measure temp..
£214.95
Ex Tax:
Growboss Nutrient Monitoring System
The Nutradip GrowBoss sets a new standard for Nutrient Monitoring, ease of use and affordability. The Nutradip Growboss is a nutrient monitoring system that assists growers in achieving maximum results for their growing efforts. The Growboss is a constant monitoring meter that indicates to the grower the exact levels of Nutrient strength, pH and temperature.This allows the grower to adjust and optimize each parameter as the crop progresses through each g..
£329.95
Ex Tax:
HI-23211-2 Industrial Grade EC Digital Wall Mounted Controller
Industrial Grade EC Digital Wall Mounted Controller, dual setpoint, on/off control, analog output, range EC 0.0 to 199.9 µS/cm; 0 to 1999 µS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm, Temperature -10.0 to 100.0°C, 230V..
£2,852.95
Ex Tax:
EDGEMULTI High End Hybrid Multiparameter
Edge - smart, slimline, bench pH, EC and DO meter Edge is the latest innovation from Hanna Instruments offering some of the most advanced technology for measuring pH, Conductivity and Dissolved Oxygen. Smart, slimline and lightweight, Edge delivers fast accurate measurement. With its high precision technology combined with the user-friendly dimensions and format of a digital tablet, the Hanna Edge offers a new, laboratory-grade, flexible pH meter that is..
£2,277.95
Ex Tax:
HI-9931-2 Wall Mounted EC Controller with Proportional Function
HI 9931 is a wall mounted meter that measures and controls conductivity in the 0 to 10 mS/cm range. A single set point allows for proportional dosage of fertilizer solutions. The proportional settings can be fine tuned through two conveniently positioned dials on the front panel. The time cycle is adjustable from 0 to 90 seconds and the proportional band from 0 to 1.6 mS/cm. Coarse, fine and slope trimmers make accurate setting and calibration easy and con..
£1,221.95
Ex Tax:
HI-983302N Gro'chek EC Meter, 0.00 to 9.99 mS/cm
The HI-983302N has been engineered with a host of features suited for the aggressive environments commonly found in agricultural applications. Housings and cable connections have been sealed against vapor and humidity. This EC meter comes with a probe specifically made for horticulture and hydroponics applications. The probe compensates for temperature variations automatically, is easy to clean, is very stable and needs little maintenance. The 12 VDC pow..
£227.95
Ex Tax:
Growlink Conductivity Sensor Replacement
Used for Laboratory and Light Industrial Applications: Cells are made from graphite to provide good performance for the value. Choose from 2 cell constants: 0.1/cm and 1.0/cm. Process versions: with 10 ft (3m) cable, PT1000 temperature element, and tinned lead (for use with Growlink Batch Tank Monitors)..
£363.95
Ex Tax:
HI-983303 EC Meter, 1990 µS/cm
The HI-983303-02 water resistant conductivity meter is Hanna's reply to requests for accurate, affordable process monitoring with low maintenance. This meter is supplied with a direct 2-pin probe and 2 m cable with a ½" thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C. In the measurement mode, a red LED will warn the user in the event the reading is outside of the ala..
£165.95
Ex Tax:
HI-983308 TDS Meter, 9.99 ppt (g/L)
The HI-983308-02 water resistant TDS meter is Hanna's reply to requests for accurate, affordable process monitoring with low maintenance. This meter is supplied with a direct 2-pin probe and 2m cable with ½" thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C. In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval...
£165.95
Ex Tax:
