Drip Irrigation
Drip Irrigation
Product Compare (0)
ASTA Drip PC Spike Black (4 L/h)
These pressure compensating spike emitters are available in 2lph 4lph and 8lph. Suitable for pots, greenhouse, nurseries and landscaping the drippers can be placed to directly target the rootzone of the plant. The drippers are designed so that all plants receive the same amount of water, whether elevated or not. A flushing feature is activated on shut down that forces a burst of water down the pipes to clear any debris and avoid blockages. Easy fitting ..
£0.95
Ex Tax:
ASTA Drip PC Spike Green (8 L/h)
These pressure compensating spike emitters are available in 2lph, 4lph and 8lph. Suitable for pots, greenhouse, nurseries and landscaping the drippers can be placed to directly target the rootzone of the plant. The drippers are designed so that all plants receive the same amount of water, whether elevated or not. A flushing feature is activated on shut down that forces a burst of water down the pipes to clear any debris and avoid blockages. Easy fitting..
£0.95
Ex Tax:
ASTA Drip PC Spike Red (2 L/h)
These pressure compensating spike emitters are available in 2lph, 4lph and 8lph. Suitable for pots, greenhouse, nurseries and landscaping the drippers can be placed to directly target the rootzone of the plant. The drippers are designed so that all plants receive the same amount of water, whether elevated or not. A flushing feature is activated on shut down that forces a burst of water down the pipes to clear any debris and avoid blockages. Easy fitting..
£0.95
Ex Tax:
Blumat 3mm Drip Tube
Essential to all Blumat systems, 3mm tubing delivers water from the sensors to the soil...
£1.95
Ex Tax:
Blumat 4mm > 3mm Reducer
For use with Blumat 3mm Drip, these high-quality fittings enable connections to be made between 3mm – 4mm pipe...
£0.95
Ex Tax:
Blumat 8mm Elbow
For use with Blumat 8mm Supply Tube, these high quality fittings allow for a tidy installation of your Blumat irrigation system...
£0.95
Ex Tax:
Blumat 8mm Supply Tube
Essential to all Blumat systems, 8mm tubing is used for supplying water from the water source to the Tropf-Blumat Sensors...
£1.95
Ex Tax:
Blumat Classic
Blumat Classic is the tried and tested solution for automatic watering of all kinds of indoor plants. Super easy to use, ideal when you’re on holiday or all year round. Let your plants look after themselves with the Blumat Classic. How it Works With Blumat Classic, indoor plants precisely get the amount of water they need, regardless of whether it’s sunny or shady. The water is drawn from a container of your choice through a thin tube and released direct..
£5.95
Ex Tax:
Blumat Digital
Perfect Control Over Watering It is not always easy to estimate the moisture content of large pots simply by looking at the soil or sticking your finger in. This Blumat Digital sensor takes the guesswork out of watering and setting up irrigation systems. You'll know if your plants need water and how much to water them. Once you start using the Blumat Digital, you'll wonder how you managed without it. Accurately dial in your irrigation system or..
£65.95
Ex Tax:
Blumat Distribution Drippers
These Distribution Drippers extend the watering capacity of the Trop-Blumat sensors on their own, while also creating an even distribution of water over the soil surface. Why distribution drippers? One Tropf-Blumat alone can water a circular area around 20-25cm in diameter. When growing in larger pots, the best way to extend the surface area a Tropf-Blumat sensor can water is using these distribution drippers. One Tropf-Blumat can be connected up to 5 of..
£0.95
Ex Tax:
Blumat Easy
Blumat Easy is a handy plant watering device, ideal when you want to take a short holiday. Simply attach to any standard plastic bottle and allow the clay cone to slowly deliver water to the plant. How it Works The Blumat Easy is a bottle adapter that requires no power, electricity, batteries or any other accessories. This fully automated plant waterer delivers a constant, steady supply of water over time. A simple irrigation system, the Blumat Easy is ..
£15.95
Ex Tax:
Blumat End-Elbow 8-3mm
For use with Blumat 3mm Drip, these high-quality fittings enable connections to be made between 3mm – 8mm pipe...
£1.95
Ex Tax:
Blumat Hole Corer
These Blumat Hole Corers are ideal when making a hole in compacted outdoor soil. They can also be used for taking soil samples from deep pots or beds...
£11.95
Ex Tax:
Blumat Pressure Reducers
Blumat systems need adequate pressure to operate effectively. Too much pressure can cause problems when running from a garden tap, or from a pump system, which is where these high-quality pressure reducers are used. With ¾” thread on one side and 8mm outlet and locking nut on the other. 0.1 bar can work on small systems, but higher is better. If you can maintain 0.5 bar, most moderate sized systems will work very well. 1.3 bar is the highest you can run..
£43.95
Ex Tax:
Blumat Pressure Vessel 2L
Pressure Vessels are used with pump systems to provide a constant pressure. They allow time for the pump to switch off while still maintaining the desired pressure in the irrigation lines. How it Works Pressure Vessels have an internal bladder. This is filled with air to the desired pressure using a standard bicycle pump (with pressure gauge). This bladder then exerts pressure, so as the unit is filled with water from the pump, the pressure of the bladde..
£65.95
Ex Tax:
Blumat Pressure Vessel 8L
Pressure Vessels are used with pump systems to provide a constant pressure. They allow time for the pump to switch off while still maintaining the desired pressure in the irrigation lines. How it Works Pressure Vessels have an internal bladder. This is filled with air to the desired pressure using a standard bicycle pump (with pressure gauge). This bladder then exerts pressure, so as the unit is filled with water from the pump, the pressure of the bladde..
£87.95
Ex Tax:
Blumat Pump Kit 8L
Designed for use with Blumat and Blusoak irrigation systems, these pump kits enable you to supply water to the Tropf Blumat sensors without having to rely on a gravity driven header tank. How it Works Utilising the market leading Shuflo diaphragm pumps, this pump kit enables you to supply water at constant pressure to your Tropf Blumat Sensors. Combining an inline pump with a pressure vessel, this complete kit provides everything you need to drive your B..
£438.95
Ex Tax:
Blumat Pump Kits 2L
Designed for use with Blumat and Blusoak irrigation systems, these pump kits enable you to supply water to the Tropf Blumat sensors without having to rely on a gravity driven header tank. How it Works Utilising the market leading Shuflo diaphragm pumps, this pump kit enables you to supply water at constant pressure to your Tropf Blumat Sensors. Combining an inline pump with a pressure vessel, this complete kit provides everything you need to drive your B..
£409.95
Ex Tax:
Blumat Shut-Off Valve
High quality 8mm inline valve with locking nuts on either side. Used after the reservoir to turn off the water supply to your plants, or used at the end of the 8mm line to bleed any air out of the system or to periodically flush the lines to prevent any build up. Recommended for all Tropf Blumat Irrigation setups...
£5.95
Ex Tax:
Blumat T-Piece 3-3-3mm
For use with Blumat 3mm Drip, these high-quality fittings enable connections to be made between 3mm – 3mm pipe...
£1.95
Ex Tax:
Blumat T-Piece 8-3-8mm
For use with Blumat 3mm Drip, these high-quality fittings enable connections to be made between 3mm – 8mm pipe...
£1.95
Ex Tax:
Blumat T-Piece 8-8-8mm Connector
For use with Blumat 8mm Supply Tube, these high quality fittings allow for a tidy installation of your Blumat irrigation system...
£1.95
Ex Tax:
Blumat Tank Connector
Used to create a watertight connection for 8mm tuning on a tank, bucket, or any water vessel! Comes with a rubber washer and nut, simply drill an 11mm hole in the water vessel and tighten by hand...
£2.95
Ex Tax:
Blusoak Kits
These handy kit packs contain the Blumat and Blusoak parts you need to for automated watering of beds. Ideal for large gardens, simply buy the amount of kit packs you need for your garden or grow room. At the heart of these Blusoak Kits are the Tropf-Blumat sensors, these constantly monitor and replenish the moisture in your soil as and when the plants need it. Blumat sensors do this automatically, maintaining a tight moisture range without allowing a wet..
£49.95
Ex Tax:
Floraflex 4″ TO 6″ Stacker
The FloraFlex® Stackers allow you to stack your 4” rockwool cube onto a 6” rockwool cube, or a 6″ rockwool cube onto a 8″ rockwool cube. The Stackers conserve space in your Veg room by allowing you to use a smaller medium and then add on to it with a bigger medium during your flip to Flower...
£3.95
Ex Tax:
Floraflex Air Bleed Valve 3/4″
The FloraFlex® Air Bleed Valve (3/4”) should be installed at the highest point (above manifold) on any mainline to prevent air locks. When water starts to flow, air is forced out of the Air Bleed Valve. When water hits the valve, the valve closes and water flows freely through the line. This product gives you more control over the accuracy of your feedings.⠀ ¾” Male pipe thread Max operating pressure 80 psi Min operating pressure 5 psi (opens when pre..
£10.95
Ex Tax:
FloraFlex Matrix - Pack of 12
The FloraFlex® Matrix System is a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your potted plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. The Matrix was not designed to be suspended above, but rather directly on top of, or touching the medium. There are two dimensions for each unit, the larger one is the outer diameter. Measure you..
£41.95
Ex Tax:
FloraFlex Matrix Circulator (12 Pk)
The FloraFlex® Matrix Circulator is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator. With the FloraFlex® Matrix System water and nutrients travel into the Circulator, ..
£16.95
Ex Tax:
FloraFlex Matrix Pad - Pack of 12
The FloraFlex® Matrix Pad is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix System can be used with pots ranging from 7.5”-18” Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator. Water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushe..
£26.95
Ex Tax:
Irrigatia 12 Dripper Extension Kit
This dripper extension kit extends the C12 to a C24 Solar Automatic dripper system with 30m of tube...
£20.95
Ex Tax:
Medusa Baseline Trays
The Baseline trays and systems have been designed for strength, durability and flexibility to suit as many growing styles as possible. We have three sizes of tray with each size having a booster option which helps compensate for uneven floors and can increase the flow rate of the run off where needed. The trays have a 25mm hole for connecting the fittings and 3x75mm holes for running the pipe away, the three holes allow for various configurations with t..
£10.45
Ex Tax:
PotStream Adjustable Watering Stake
The PotStream™ is a side mounted watering solution for pot plants and containers. The adjustable stream pattern minimises soil erosion. The dripper is easily adjusted to change the flow and pattern radius and so can be used in a variety of pots. Variable flow rate and pattern size suits 150mm to 600mm diameter pots Suits pot wall thickness up to 40mm Side mounted installation for clean and tidy location of the irrigation tube Pot plants, planter boxe..
£1.95
Ex Tax:
Pressure Regulator 3/4" BSPF x 3/4" BSPM 100kPa
These regulators restrict outlet pressure to optimise dripper performance and are designed for low flow irrigation systems. Suitable for all drip, spray and sprinkler systems. Easily connect to taps, valves, tap timers and irrigation valves in a manifold system. 3/4 BSFP inlet and 3/4 BSFP outlet. Inlet pressure 0-700kPa..
£10.95
Ex Tax:
Topspin 13mm Dripper Manifolds
TopSpin Dripper Manifolds act as pressure regulators to ensure even water distribution to every plant. The TopSpin Dripper Manifold Tee or Elbow easily fits onto 13mm standard or flexible tube. Single TopSpin Drippers Manifolds need a water pump with a flow rate of 1000 litres per hour, multiple Topspin manifolds up to 4 in total will need a larger pump with a flow rate of 2000 litre per hour. 12 x Drippers 1m Dripper lines 2 litre per hour flow rate ..
£20.95
Ex Tax:
Topspin 25mm Dripper Manifold Tee
TopSpin 25mm Dripper Manifolds act as pressure regulators to ensure even water distribution to every plant. The TopSpin 25mm Dripper Manifolds are better suited to larger irrigation setups and fit onto 25mm tube. TopSpin Dripper Manifold Features: 12 x Drippers Use 2 or more drippers for larger pots 1m Dripper lines 2 litre per hour flow rate Fits 25mm tube TopSpin Water Pump Recommendations: 6 x TopSpin Manifolds = 3600L/hr 8 x TopSpin Manif..
£24.95
Ex Tax:
TopSpin Dripper & Line - Replacement 12 Pack
Replacement dripper lines and stakes for TopSpin Dripper Manifold...
£4.95
Ex Tax:
TopSpin Dripper Kit
The TopSpin Dripper Kit is a high quality high pressure drip irrigation system available for use with multiple plant site setups. The TopSpin Dripper Kit comes supplied with: TopSpin Dripper Manifolds TopSpin Dripper & Line Filter and Non-Return-Valves Anti Siphon Valves Water Pump Necessary connectors (Tee’s and / or Elbows)..
£71.95
Ex Tax:
Tropf Blumat Protection Cap
In some situations, these protection caps for the Tropf-Blumat sensors are especially useful. They prevent accidental adjustments from occurring when doing general maintenance, such as lower leaf and stem pruning, or top-dressing. Please note – once on they are quite tricky to remove without a small screwdriver...
£0.95
Ex Tax:
Tropf Blumat Sensors
Fully automated watering While many irrigation systems rely on timers and the guesswork of growers to determine when to water and how much, Tropf Blumat sensors do this automatically, maintaining a tight moisture range without allowing a wet-dry cycle. This is hugely beneficial not only to the health of your plants but also to the microbial life in the soil. Blumat Sensors are perfect for organics growers using living soil. Automatically waters the soi..
£5.95
Ex Tax:
FloraFlex 4″ FloraCap
The FloraFlex® FloraCap® (4 inch) is a revolutionary tool for top feeding that also helps eliminate algae. Place the FloraCap® on top of your 4 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with FloraClips. Each cap features 17 flower designed louvers that deliver water, nutrients, and air to the medium while blocking light. The FloraCap® strategically covers the top of the med..
£5.95
Ex Tax:
FloraFlex 6″ FloraCap
he FloraFlex® 6″ FloraCap® is a patent pending revolutionary tool for top feeding that also helps eliminate algae. The FloraCap® 2.0 was redesigned to give you a more consistent flow rate, even distribution, a slightly increased air flow, and improved stabilization. Place the FloraCap® on top of your 6 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with FloraClips. Each cap feat..
£7.95
Ex Tax:
FloraFlex 6" Single Use FloraCap
The FloraFlex® FloraCap® is a revolutionary tool for top feeding that also helps eliminate algae. If cared for properly you can get multiple uses out of this tool. Place the Single Use FloraCap® on top of your 6 inch rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with built in holes for tubing. Each cap features strategically designed slots that deliver water and nutrients to the med..
£3.95
Ex Tax:
FloraFlex 6" Drip Shield
FloraFlex® Drip Shields provide a superior drip system. Place the Drip Shield on top of a 6” rockwool cube and enjoy countless combinations as you mix and match any of the following products utilizing the Drip Shield’s two inserts: Short Plunge Drippers, Long Plunge Drippers, Short Rocket Drippers and Eliminators. By covering the meidia, the Drip Shield blocks light allowing roots to flourish and eliminates algae. Compatible with all 6” rockwool cubes. ..
£3.95
Ex Tax:
FloraFlex 9" - 12" Round Flood & Drip Shield
The FloraFlex® Round Flood and Drip Shield + Quicker Dripper instantly gives you control over your feeding plan and was designed for those who want a faster feed than the Gravity Drippers. Place the Round Flood and Drip Shield on top of your plant and use the built in measuring table to fill the reservoir with water and nutrients. Quicker Drippers pop into the 5 holes and slowly deliver the exact amount of water and nutrients you want to distribute to your..
£30.95
Ex Tax:
FloraFlex Long Plunge Drippers - 6 Pack
FloraFlex® Long Plunge Drippers are used with the Drip Shield. FloraFlex® drippers are all strategically designed to be a Subsurface Drip System with water and nutrients delivered straight to the root zone of your plants. Water and nutrients travel down a 1, 2, or 4 GPH torturous path, the drops then fall 3/4” below the surface dispensing out of the three slots at its bottom. 1/4” Barbed Nozzle. Use with the FloraFlex® Drip Shield. Self-Cleaning..
£9.95
Ex Tax:
FloraFlex Multi Flow Bubbler
The FloraFlex® Bubbler is an 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool. Completely gutted inside to allow maximum pressure while still evenly distributing water. 1/2” inlet which seamlessly screws into our Quick Disconnect without glue 8 barbed ports that connect to 1/4” OD Tubing Rubber grip on top for easy use ABS Pla..
£23.95
Ex Tax:
FloraFlex Bubbler Inserts (2, 6, 10 & 20 GPH)
The FloraFlex® Bubbler Flow Insert allows you to deliver water to your plants at your desired flow rate (2, 6, 10, or 20 GPH). Use with FloraFlex® Multi Flow Bubbler. Quick loading available in 2 (YELLOW), 6 (BLACK), 10 (RED) & 20 (BLUE) GPH Use with your FloraFlex® Open Flow Bubbler Color coded for easy recognition Sold in packs of 12...
£13.95
Ex Tax:
FloraFlex Flora Valve 3/4"
The FloraFlex® shut off valve also allows you to control the pressure of water and nutrients being delivered through the manifold to your plants. Easily snaps into the Flora Pipe Fitting T or Elbow and screws into the Quick Disconnect. Flora Pipe Fittings “T” and “Elbow,” snap into this unit with no glue required Connects with ForaFlex GHP to NPT Quick Disconnect, no threading required Manual off and on action, with easy to use valve handle Max..
£12.95
Ex Tax:
FloraFlex 3/4" Elbow Pipe Fitting
The FloraFlex® Pipe Fitting Elbow (1” or 3/4”) is used for the last manifold on your PVC line. Glue your PVC to the Flora Pipe Fitting and then easily snap the Fitting into the Flora Valve. Compatible with regular 1” or ¾” PVC pipe. Attaches to Flora Valve with snap feature (no glue required). O-Ring included. Available in 1″ or 3/4″. O-Ring should be lubed (if not already) for easy install and prevention of leakage. 120 psi PVC..
£3.95
Ex Tax:
FloraFlex 3/4" T-Piece Pipe Fitting
The FloraFlex® Pipe Fitting T (1” or 3/4”) allows you to connect multiple manifolds to your PVC line. Glue your PVC to the Flora Pipe fitting and then easily snap the Fitting into the Flora Valve. Compatible with regular 1” or ¾” PVC pipe. Attaches to Flora Valve with snap feature (no glue required). O-Ring included. Available in 1″ or 3/4″. O-Ring should be lubed (if not already) for easy install and prevention of leakage. 120 psi PVC..
£3.95
Ex Tax:
FloraFlex 1/4" Dripline 100 Feet / 30m
The FloraFlex® Tubing is a flexible premium vinyl, food grade hose. At 1/4” OD, our Tubing fits perfectly with ALL FloraFlex® tools. Color coordinate and automate! 100 feet in length. 1/4” OD. 3/16” ID. Flexible premium vinyl. FloraFlex® Green. FloraFlex® Logo printed on the tubing...
£27.95
Ex Tax:
FloraFlex GHT to NPT Quick Disconnect Set
The FloraFlex® Quick Disconnect tool easily connects your Flora Valve to your FloraFlex® Bubbler. Eliminates the need for using Teflon Tape during manifold assembly. Allows you to effortlessly disconnect the bubbler for cleaning purposes. 3/4” Garden hose connection on one side and standard 1/2” thread that connects to Flora Flex Bubblers on the other No threading required Leak free design Rubber grip for easy use ABS Plastic..
£5.95
Ex Tax:
FloraFlex Quick Disconnect Pipe System
The FloraFlex® Quick Disconnect Pipe System is an eight outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. Assembled Unit Includes: Flora Pipe Fitting 3/4” Flora Valve Quick Disconnect Open Flow Bubbler 20-60 psi..
£44.95
Ex Tax:
Dripper Line
Standard black irrigation line suitable for making drip irrigation systems...
£8.95
Ex Tax:
1.3mm Micro Sprinkler Green (60 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£1.95
Ex Tax:
180° Micro Spray Green Base (54 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£0.95
Ex Tax:
200mm Rigid Riser with Adaptor
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£0.95
Ex Tax:
360° Dripper (0-33 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£0.95
Ex Tax:
360° Micro Spray Blue Base (33 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£0.95
Ex Tax:
360° Micro Spray Green Base (54 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£0.95
Ex Tax:
40° Micro Spray Blue Base (33 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£0.95
Ex Tax:
90° Micro Spray Blue Base (33 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£0.95
Ex Tax:
90° Micro Spray Green Base (54 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£0.95
Ex Tax:
Agri Drip Emitter (2 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£0.95
Ex Tax:
ASTA Clip Stake
The ASTA® Clip Stake is designed to secure irrigation tubing. Featuring the signature Asta triangle base stake, it offers excellent retention in most substrates. By Antelco of Australia. High quality and durable, even in the harshest conditions. Made from UV stabilised materials. Features: Locates and secures irrigation tubing Suitable for several tubing sizes Made from UV stabilised materials, and resistant to common horticultural chemicals a..
£0.95
Ex Tax:
Drip Feed Kit for HydroGarden Flood and Drain Kit (3' x 3')
Buy the low cost Table Drip Feed Kit as an extra and you can transform the Flood and Drain Table Kit into a Drip Feed version. Simply plumb in the fittings supplied. The Drip Feed Kit will give you the chance to experience another variation of hydroponics quickly and in an affordable and reliable way. This versatile and forgiving system is ideal for growing plants such as herbs and lettuce...
£21.95
Ex Tax:
Micro Spray Mister Yellow Base (18 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£0.95
Ex Tax:
Midi Drip Emitter (4 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£0.95
Ex Tax:
Midi Drip Emitter on Stake (4 L/h)
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£1.95
Ex Tax:
Netafim PCJ Dripper and Prevo Stake Assembly 2l/Hr 800mm Tube
Pre assembled Dripper Stake, 800mm Tube and a 2l/h natafim valve...
£1.49
Ex Tax:
Nipple 5.25 (4.6mm) for CNL (4mm Insert Nipple)
Nipple 5.25 (4.6mm) for CNL (4mm Insert Nipple)...
£0.19
Ex Tax:
Riser Jet Stake
All of our high quality fittings are made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs...
£1.95
Ex Tax:
Tylene LDPE Hose 20mm x 1.5mm - 100m Roll
Tylene LDPE Hose 20mm x 1.5mm - 100m Roll...
£134.95
Ex Tax:
Tylene LDPE Hose 25mm x 1.9mm - 100m Roll
Tylene LDPE Hose 25mm x 1.9mm - 100m Roll...
£125.95
Ex Tax:
GHE Irrigation Kit for WaterFarm
A spare Drip Ring and Pumping Column Kit for the GHE WaterFarm. It is a useful spare in case of damage or blockages...
£28.95
Ex Tax:
GHE Irrigation Kit for AquaFarm
A spare Drip Ring and Pumping Column Kit for the GHE Aquafarm. It is a useful spare in case of damage or blockages...
£28.95
Ex Tax:
Watering Ring
The PLANT!T Watering Ring is ideal for use with DIY kits or systems. It comes with a laser-cut watering ring and a T-piece that 13mm (1/2") tubing can be attached to. The laser cutting process used on the watering ring eliminates swarf that creates very clean holes and reduces the likelihood of blockages...
£6.95
Ex Tax:
Flood Dripper
Ensures a constant delivery as long as line pressure remains. For use with free-flowing media such as clay pebbles...
£0.95
Ex Tax:
Octa-Mitter Adjustable Dripper
Available with or without a stake. The Octa-mitter is an adjustable dripper giving 0-40 litres per hour...
£1.95
Ex Tax:
Dripper Line Connector
High quality fitting made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions...
£1.95
Ex Tax:
Button Dripper Assembly
These pre-assembled Woodpecker Button Dripper sets come complete with: * Dripper * 80cm PVC lead & stake * Either 2ltr/hr or 4ltr/hr; pressure compensating or non-compensating discharge unit Non-compensating units Flow rates (i.e. 2 l/h & 4l/h) calibrated at 1 bar (15psi) pressure. If pressure increases output increases. If pressure is lower than 1 bar, flow rate will be less . As water pressure can change from one end of a drip system to the othe..
£1.95
Ex Tax:
Mini Punch
Basic Mini Punch handtool for producing a 3mm hole in LDPE pipe. Manufactured from high strength moulded plastic...
£6.95
Ex Tax:
Hole Punch
Comfortable grip handle Comes with specially designed adaptor for inserting sprinklers & drippers Manufactured from high strength moulded plastic..
£11.95
Ex Tax:
Scissor Punch
This high strength plastic tool is shaped for maximum comfort and ease of operation. The blade is heat-treated and ground for long0life & accuracy of cut, and retracts fully after use, thereby protecting it. There are two models, one for 16mm & 20mm LDPE pipe, and one for 25mm & 32mm pipe...
£15.95
Ex Tax:
Adustable On-Line Dripper
Adjustable dripper from 0-40ltr/hr. Just unscrew the cap one click at a time to increase the flow - drip, dribble or squirt. These drippers can be plugged directly into the LDPE supply pipe, or fixed to the end of 5mm PVC tube...
£1.95
Ex Tax:
Dripper Cap
Dripper caps are used to shut off individual drippers as & when required. Dripper must have a nipple outlet...
£0.95
Ex Tax:
Inline Dripper
This dripper has been designed to fit 'inline' rather than on the end of a lead. The water is discharged from the side of the dripper, not out of the end. This is ideal for watering hanging baskets or tubs where one dripper isn't enough. Several drippers can be placed along a line (i.e. troughs) or in a loop (i.e. larger baskets & tubs), allowing the water to be applied at several points, giving more even watering. - 2ltr/hr discharge rate (unregula..
£0.95
Ex Tax:
Junior PC Drippers
Drippers available in to sizes - 2 litres per hour and 4 litres per hour...
£0.95
Ex Tax:
