The quietest system! No vibrating or buzzing ballast and no buzzing and / or chattering relay (free on / off switch).

The highest output of all 400/600watt EBs by overdrive technique (Lumen Boost)

The dim is the largest range of all electronic ballasts

Continuously dimmable instead of steps

Suitable for 400 and 600w bulbs

Suitable for MH and HPS lamps

The Dimlux features diagnostic LEDs. This can be seen directly or ballast, standby or failure and what the fault is concerned.
Fireproof!! The built-in processor monitors the connection between the ballast and the lamp will turn off the ballast and continuously at a bad contact or short circuit. Normal remains a ballast by starting with 5000V (with voltages of this size materials so hot that even metal smelting).

In a normal ballast collapses to a lower power supply automatically the light output with it. For example, if you have 220V instead of 230V supply voltage, the light output by 11%. Because the Dimlux electronically increases the voltage to 230V always have a stable and high light output.

The power consumption of the Dimlux s with always the same. In a normal ballast increases with time while the recorded current to the light output decreases, so the extra efficiency decreases rapidly. The current consumption can be up to 4-5A continuously for a 600w bulb (this is the same consumption as a 1000w lamp) The wiring with multiple ballasts are generally not designed for these high currents causing fire hazard.