The Cropmaster PRO 1000 is an extremely powerful lamp and is designed for commercial growers in large indoor rooms and glass houses or large ventilated grow tents.

If your looking to replace your existing 600 - 1000w HPS fixtures then you will definitely need to be looking at high bay high power led to do this.  Its all about the amount of photons being emitted and although led is more efficient than HPS in order to get a large enough amount of photons to your plant you need a lot of power, which is why you need the best light for the job.

The intended coverage area in an open room is 1.5 x 1.5m (5ft x 5ft) at 2.2m height, however if you have a ventilated grow tent you can use the lamp in as small an areas as 1 x 1m (3.2 x 3.2ft) at 1.8m height. We achieve this by using High Power Cree XPG3 LED's with a 120 degree lens angle, combining this with our intelligent design that blocks 0% of the light emitted from the lamp we achieve a better footprint than any of our competitors in a much small form factor.

An even SPD coverage, wider bandwidth multi spectrum and even PPFD density not only gives a growing experience similar to your traditional HPS but has eliminated all possibliites of led bleaching.

Unlike traditional led lamps the Cropmaster PRO has an extremely efficient cooling system that evacuates the heat from the lamp extremely fast giving adequate heat to a grow tent to encourage plant growth and keep the efficiency and lifespan high. Due to greater energy production from the superior spectrum emitted from led lamps we can achieve better results for less input power. Maintaining efficacy with active cooling providing reliable and repeatable yields year on year.

We do not encourage using this lamp in sealed rooms or small areas as the build up of heat could be detrimental to your plants and lamp.

Dimmable via External Controller (Sold Seperately)

• Dual RJ11 inputs on each ballast allows daisychaining of multiple ballasts for dimming making installations simple and low cost. You can use master controllers or for a much lower cost you can use 0-10v LED dimmer switches in conjunction with an RJ11 to Terminal Block Adapter.

Moisture & Particle Control

• Form and function combine to give a lamp that automatically channels and ejects any particulates or moisture.
• Drip rings and gutters channel unwanted condensation away from the optics.
• Our unique Top-Down Moulded design ensures a long lasting lamp for extreme environments.

No Entry

• Fan and vent holes on the top of lamps is a common design flaw in horticultural led and ultimately ensures a lower lifespan and nice home for insects, particulates and dust.  
• Typically when your led is switched off insects often make for the warm safe cosy area inside your lamp to make their new home and once inside can be hard to eject.
• Our intelligent design with no vent holes on the top of our chassis ensuring that there is no ingress from particulates or moisture during light down time, and our cooling system ensures any particles or insects are automatically shredded and ejected.

Solid 5 Year Warranty

Unlike traditional horticultural light sources quality led should be looked at as a long term investment that will ultimately pay dividends due to the extremely low maintenance costs vs HPS and bulky led lamps.

One of our Cropmaster PRO 1000 lamps will pay for itself within two years due to the energy savings and lack of maintenance, no need to ever change bulbs, ballasts or reflectors.   

We offer a five year warranty on all our lamps but in our considerable experience the high end quality core components we use will allow your lamp to efficiently for ten years or more and the led families we use will never drop below 5% of their original output over their lifespan with our cooling system.

Specifications:

• Electrical Efficacy:: 2.1µmol/j
• PPF:: 1155µmol
• Watts:: 550w
• Amps:: 2.5a
• Width:: 218mm / 8.58"
• Depth:: 68mm / 2.67"
• Length:: 437mm / 17.2"
• Coverage:: 5ft x 5ft (1.5m x 1.5m)