Commercial Grade Chilled Water AC for 12 to 100 600W Lights

AdViroVent are leaders in the innovate and ever-growing world of precise, reliable and energy efficient climate control.

AdViroVent design, manufacture and supply chilled water climate control solutions. All our systems are designed with you the end user in mind. Our systems are designed and made for easy and quick installation by the end user, trouble free reliable operation, low energy consumption, free cooling options, ease of maintenance, easy relocation, longevity of equipment, and the ability to precisely control your sealed room environment.

All of our systems have been tested in the real environment and before being sent out to you are fully assembled and test run.

AdViroVent systems are also supplied with full instruction on how to set you system up and full technical assistance and advice before and after purchase.

Benefits

• Easy to install
• Adjustable Dehumidification
• Low Power Consumption
• Easy to move and reconfigure
• No risk of refrigerant leak
• Free cooling option
• Industrial grade components
• Every system custom made
• Custom designed for hydroponics
• Simple to use
• Ability to set differing day and night time temperatures
• 100’s of options
• Environmentally friendly
• Custom designed for each job
• 100% reliability
• Designed to be operated all year round in most extreme temps
• Easy to understand operation
• Easy to modify system once installed
• Easily cool multiple areas at the same time
• No wiring required
• Minimal maintenance
• Exception strength and reliability
• Low Current draw
• Long pipe runs
• Everything required is supplied
• Simple and intuitive controller
• Using knowledge gleaned from pharmaceutical and medical industries
• Push fit interconnecting pipework
• User friendly simple controls
• Pre-installed with all required equipment
• All custom made in our factory in England
• Plug and play operation
• Easy system fill with hose pipe

Internal Units

We have 3 different types of internal units which are all compatible with each other allowing different units to be used in different scenarios.
Our Climate Control Units (CCU’s) are available in 7.5Kw and 15Kw Configurations.
Wall Mounted Units are available in sizes ranging from 2.5Kw to 10Kw.
Ceiling Mounted Units are available in a range of sizes from 2.5 to 8Kw.  
Both our wall and ceiling mounted units are cooling only as standard. The ceiling mounted units can be installed with heaters as an option.

How Our Systems Work

1. The Water is cooled by the outdoor chiller.
2. The pump which is built into the outdoor unit/Chiller circulates the chilled water to the Climate Control Units.
3. The chilled water solution flows through the CCUs absorbing the heat from the room controlling the temperature.
4. The now warmed water then flows back to the outdoor unit and is again cooled and recirculated.
5. If a free cooler is installed. The warmed water passes through the free cooler and uses the external air temperature to remove the heat gained before entering the chiller. When this is in operation very little power is used as just the chillers pump is in operation to circulate the water. The free cooling option will be in use any time the ambient air temp is below 15ºc up to 75% of the year!    
6. Adjustable dehumidification is available on all systems by raising and lowering the chiller water flow temperature allowing dehumidification to take place without the use of additional power/dehumidifiers.
7. Our systems are also fitted with a heater to maintain temps throughout the night.